3Dlabs Wildcat Realizm 800 Operation & User’s Manual

Text of 3Dlabs Wildcat Realizm 800 User Guide:

• SETUP 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 15 2. From the Start menu, go to Control Panel. 3. Under Change or Remove Programs, highlight the current Display Driver and click Change/Remove. 4. Click Yes when prompted to confirm the driver removal. 5. Click OK when notified you must reboot your system for driver removal to

• 3Dlabs Wildcat Realizm 800, SOFTWARE CONFIGURATION 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 24 The Display Rotation tab allows you to check or redetect the automatic orientation of your display (if supported in the display hardware). It also provides controls to manually rotate your display as needed. Configuring Display Rotation Options Orientation Redetect Orientation: Some display devices have built-in hardware support for rotation. If your display device supports hardware rotation, click this button to use the desired orientation format. Note: You must configure your display first. Display Rotation If your display does not

• 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 44 THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. SOME STATES OR COUNTRIES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR CONDITIONS, SO THE ABOVE EXCLUSION MAY NOT APPLY

• 3Dlabs Wildcat Realizm 800, 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 38 APPENDIX B – SPECIFICATIONS Specifications Manufacturer 3Dlabs Functional Specifications NOTE: IF YOU ORDERED THIS VIDEO CARD WITH A SYSTEM, IT WAS PREINSTALLED AND CONFIGURED FOR USE IN YOUR SYSTEM BEFORE SHIPMENT . Graphic controlle r High-speed Wildcat Realizm Visual Processing Unit DAC speed 400 MHz (355 MHz for the Wildcat Realizm 500) Wildcat Realizm 800 • 512 MB GDDR3 unified memory with 512-bit interface bus • 128 MB GDDR3 DirectBurst memory with 128- bit wide interface bus • 64 KB of flashable EEPROM memory for VGA bios and product configurat

• 3Dlabs Wildcat Realizm 800, SETUP 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 13 NOTE: If your monitor does not have a built-in video cable, use a shielded video cable with either a DVI-I receptacle or a 15- pin VGA video connector (with adapter) at one end for the video output port on the card, and the appropriate connectors at the other end for the video input port on the monitor. See the documentation delivered with your monitor for more information. NOTE: If you ordered the Wildcat Realizm video card with a system, it was installed and configured before shipment. See Chapter 3, “Using the Video Card,"

• SOFTWARE CONFIGURATION 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 22 Configuring DirectX Options Full-scene Antialiasing Choose one of the following from the dropdown menu: Disabled: Full-scene antialiasing is disabled in all applications. Automatic: Full-scene antialiasing is disabled by default, but can be enabled by applications.

• 3Dlabs Wildcat Realizm 800, 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 47 DECLARATION OF CONFORMITY Manufacturer’s Name: 3Dlabs Ltd Manufacturer’s Address: Meadlake Place, Thorpe Lea Road, Egham, Surrey. TW20 8HE declares that the product/s Product Name: Wildcat Realizm 100 Graphics Accelerator Card Wildcat Realizm 200 Graphics Accelerator Card conforms to the following product specifications: Following provisions of the 89/336/EEC Directive Specification Class / Level EN 55022:1998 (CISPR 22 limits) Class B Radiated Electric Field Emissions EN 55022:1998 (CISPR 22 l

• 3Dlabs Wildcat Realizm 800, DECLARATION OF CONFORMITY Manufacturer’s Name: 3Dlabs Ltd Manufacturer’s Address: Meadlake Place, Thorpe Lea Road, Egham, Surrey. TW20 8HE declares that the product/s Product Name: Wildcat Realizm 500 Graphics Accelerator Card conforms to the following product specifications: Following provisions of the 89/336/EEC Directive Specification Class / Level EN 55022:1998 (CISPR 22 limits) Class B Radiated Electric Field Emissions EN 55022:1998 (CISPR 22 limits) Class B Power Line Conducted Emissions 47 CFR Part 15,Subpart B (

• 3Dlabs Wildcat Realizm 800, 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 43 APPENDIX C – SOFTWARE LICENSE SOFTWARE LICENSE AGREEMENT THIS IS A LEGAL CONTRACT BETWEEN YOU, THE END USER, AND 3DLABS, INC. LTD. BY USING THE SOFTWARE ACCOMPANYING THIS GUIDE OR PRE- INSTALLED ON YOUR SYSTEM, YOU ARE ACCEPTING AND AGREEING TO BE BOUND BY THE TERMS OF THIS SOFTWARE LICENSE AGREEMENT. IF YOU ARE NOT WILLING TO BE BOUND BY THE TERMS OF THIS SOFTWARE LICENSE AGREEMENT, PROMPTLY RETURN THIS SOFTWARE LICENSE AGR

• 3Dlabs Wildcat Realizm 800, SOFTWARE CONFIGURATION 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 18 In the Display Properties window: 1. Choose the Settings tab. 2. Click the Advanced button. 3. Select the 3Dlabs tab. When you first click the 3Dlabs tab in the Display Control Panel, this introductory page appears: Note: This is only an example. Your own panel displays the information specific to your board, BIOS, and driver version. This first window provides the following information: • Hardware Information: • Display Adapter • Video Memory • Software Information: • Driver Version •

• 3Dlabs Wildcat Realizm 800, SOFTWARE CONFIGURATION 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 29 Optimize Settings Configure the Acuity Driver to use optimal settings for a particular application by selecting that application from the pull-down menu. Acuity Applications: 3Dlabs Acuity Windows Manager The 3Dlabs Acuity Taskbar Icon gives you quick access to driver features from the Windows Taskbar and greater control over the appearance of your Windows desktop. To configure the Acuity Windows Manager click Configuration Wizard to begin. You may also

• 3Dlabs Wildcat Realizm 800, INTRODUCTION Welcome to 3Dlabs! Thank you for selecting a 3Dlabs ® Wildcat ® Realizm™ Graphics Accelerator Card! This User Guide provides information about Wildcat Realizm Graphics Accelerator Cards. In addition to this guide, you are strongly encouraged to use the online help included in the 3Dlabs driver software Help screens. System Requirements Wildcat Realizm 100 Wildcat Realizm 200 Wildcat Realizm 500 Wildcat Realizm 800 System Hardware Intel® Pentium® and Xeon®, AMD Athlon�

• 3Dlabs Wildcat Realizm 800, SOFTWARE CONFIGURATION 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 34 HotKeys The HotKeys Tab provides options for configuring your keyboard for multiple hotkey selections, which will reduce mouse clicks or keyboard selections for Acuity Windows Manager features. To use, perform the following: 1. Select the action to define a hotkey. 2. Press the keys that will define the hotkey feature. Typically, this includes first pressing ALT, CTRL, SHIFT in some combination and then a specific letter or number key. 3. Click the Set button to assign the hotkey key press

• 3Dlabs Wildcat Realizm 800, EC Declaration of Conformity We: 3Dlabs Ltd, Meadlake Place, Thorpe Lea Road, Egham, Surrey. TW20 8HE declare under our sole legal responsibility that the following product/s: Model: Wildcat Realizm 500 Graphics Accelerator Card is in conformance with the following relevant harmonised standards: EN 55022:1998 (Class B Radiated Electric Field Emissions) EN 55022:1998 (Class B Power Line Conducted Emissions) EN 55024:1998 (IEC 61000-4-2) EN 55024:1998 (IEC 61000-4-3) EN 55024:1998 (IEC 61000-4-4) EN 55024:1

• 3Dlabs Wildcat Realizm 800, SOFTWARE CONFIGURATION 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 23 Configuring Display Settings To configure your display settings, select a display device from the graphical display or the drop down list, and click the “Device Settings” button. Another window opens with Color Settings, Display Rotation, and Display Selection option tabs. From the Color Settings tab, you can configure the following: • Select one of the following from the drop down menu for color setting changes: • Display Device : Color settings are applied directly to the frame buffer for the display device. • Overlay : Color settings are only applied

• 3Dlabs Wildcat Realizm 800, SOFTWARE CONFIGURATION 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 19 You can also navigate to the full set of 3Dlabs driver customization tools via the icons on the left side: • OpenGL Options – Full scene antialiasing, Anisotropic filtering, Stereo, Buffer Swap Mode, Vertical Sync • DirectX Options - Full scene antialiasing, Vertical Sync • Display Settings – Clone mode, Color control, Display rotation, Edge blending/overlap • Optimize Settings – Application optimization, Acuity Windows manager, Task bar These customization tools are discussed in more detail l

• 3Dlabs Wildcat Realizm 800, 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 35 APPENDIX A- ENABLING MULTIVIEW AND GENLOCK The Wildcat Realizm Multiview Option Kit enables the Multiview and Genlock features of your Wildcat Realizm graphics accelerator. The Multiview feature allows you to run the same application on multiple workstations and treat the multiple displays as a single "virtual canvas" such that they all refresh as one. Genlock enables you to lock one or more graphics cards to some external synchronization source such as a studio sync (the cards may be housed in a single workstation or distributed across multiple workstations). NOTE: Your Wildcat Real

• 3Dlabs Wildcat Realizm 800, SOFTWARE CONFIGURATION 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 30 The Acuity Windows Manager allows you to configure the following: • Window maximization control • Display boundary control • Application Dialog box positioning • Window transparency • 3Dlabs Window menu extensions • Windows position memory • Dual Display taskbar • Task switching • Enable multiple desktops • Define Hotkeys Configuring Acuity Windows Manager Options This window provides customization of the Windows, Taskbar, Desktops, and Hot Keys features of the Acuity Windows Manager: The

• 3Dlabs Wildcat Realizm 800, SOFTWARE CONFIGURATION 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 33 Task Switching – Select this check box to make the windows task switching feature (ALT+Tab) appears on all displays. If this feature is not enabled, task switching will only appear on the primary display. Desktop The Desktop Tab provides options for enabling multiple virtual desktops. This can be very useful for organizing the many multiple applications in use. When enabled, right clicking the application name in the task bar or in

• 3Dlabs Graphics Accelerator User's Guide 46 EC Declaration of Conformity W e: 3Dlabs Ltd, Meadlake Place, Thorpe Lea Road, Egham, Surrey. TW20 8HE declare under our sole legal responsibility that the following product/s: Model: Wildcat Realizm 100 Graphics Accelerator Card Wildcat Realizm 200 Graphics Accelerato

• SOFTWARE CONFIGURATION 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 32 Effects The Acuity Windows Manager allows your application window to become transparent when you click and hold on the application title bar. This is a great tool to see what is behind the application window without having to move it out of the way. Make windows transparent while dragging �

• 3Dlabs Wildcat Realizm 800, SOFTWARE CONFIGURATION 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 20 Anisotropic Filtering Disabled: Anisotropic filtering is disabled in all OpenGL applications. Automatic: Anisotropic filtering is disabled by default but applications may specifically enable it. Force 2X Sampling: Anisotropic filtering with two samples per texel will be used for all OpenGL applications. Force 4X Sampling: Anisotropic filtering with four samples per texel will be used for all OpenGL applications. Force 8X Sampling: Anisotropic filtering with eight samples per texel will be used for all OpenGL applications. This is the highest quality setting Buffer S

• 3Dlabs Wildcat Realizm 800, SETUP 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 9 1. Locate the power connection on the Wildcat Realizm 800 (see diagram below). Connect the single end of the power Y cable to the Wildcat Realizm 800. 2. Locate a single connector each on two independent system power supply cables. The cables must be independent of one another and the connectors must be the first ones closest to the power supply. 3. Plug each of the two connectors from the power Y cable (the one you plugged into the Wildcat Realizm 800) into the two system power supply cables. 4. Remove the anti-static wrist strap, if used, and replace the cover on your system. 5. Reconnect the

• 3Dlabs Wildcat Realizm 800, APPENDIX A 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 36 To configure Multiview 1. Insert one end of the Multiview cable (included in your Wildcat Realizm Multiview Option Kit) into the Multiview Out port of the first workstation. This workstation becomes the “Master” 2. Insert the other end of the cable into the Multiview In port of the second workstation. This workstation becomes a “Slave.” 3. If connecting more than two workstations, continue linking workstations to one another by connecting the Multiview Out port of one workstation to the Multiview In port of the next. The last workstation should only have a cable plugged into the Mul

• 3Dlabs Wildcat Realizm 800, 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide iv Wait for Vertical Sync ........................................................................................................................................... 20 Stereo Output ....................................................................................................................................................... 20 Configuring your 3Dlabs Graphics Accelerator Card for Stereo Viewing ............................................... 21 To set up and configure stereo viewing: .............................................................................

• 3Dlabs Wildcat Realizm 800, APPENDIX B 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 41 W ildcat Realizm 200 85 Watts (Total) AGP 2.76 Amps at 3.3 Volts AGP 0.7 Amps at 5 Volts AGP 0.12 Amps at 12 Volts Auxiliary 1.8 Amps at 5 Volts Auxiliary 3.5 Amps at 12 Volts W ildcat Realizm 100 75 Watts (Total) AGP 2.92 Amps at 3.3 Volt AGP 0.53 Amps at 5 Volt AGP 0.1 Amps at 12 Volts Auxiliary 1.4 Amps at 5 Volts Auxiliary 2.8 Amps at 12 Volts T hermal Specifications For storage conditions: • Temperature: –40°C to 65°C • Humi

• 3Dlabs Wildcat Realizm 800, 3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 49 DECLARATION OF CONFORMITY Manufacturer’s Name: 3Dlabs Ltd Manufacturer’s Address: Huntsville, Alabama, USA. 35824 declares that the product Product Name: Wildcat Realizm 800 Graphics Accelerator Card conforms to the following product specifications: Following provisions of the 89/336/EEC Directive Specification Class / Level EN 55022:1998 Class B Radiated Electric Field Emissions EN 55022:1998 Class B Power Line Conducted Emissions EN 55024:1998 (IEC 61000-4-3) Radiated Electromagnetic Fi

More Instructions:

3Dlabs Wildcat Realizm 800 Operating manual 29-09-2023 2

DOWNLOAD

Related Products and Documents (Video Card):

Comparable Devices:

Similar Resources:

• Apple Power Mac G4 (4 pages) 073-0561 Rev. F  Power Mac G4 / Macintosh Server G4 Modem Replacement Instructions Follow the instructions in this sheet carefully. Failure to follow these instructions could damage your equipment and void its warranty. Note: Written and video instructions covering customer-installable parts are available at http://www.info.apple.com/installparts/. Wa …

• Biostar VA4673NH51 (2 pages) QQuuiicckk IInnssttaallllaattiioonn GGuuiiddee English Caution Static electricity in your body can severely damage the VGA electronic parts. Please follow the necessary precautions:  Before opening the anti-static packaging of the VGA card, touch the metal frame of your unplugged computer to dissipate any static electricity in your body.  Don’t …

• MSI NX6200TC-TD128E (2 pages) Hardware InstallationSoftware Installation(for ) Windows XP/ 2000RITM TMnstalling MSI Live Update 3 To install the driver of the VGA card to your computer running CDWindows XP or 2000, please follow the steps below:1. Turn on the computer.2. Insert the into the CD-ROM drive. The Autorun program will start the Setup program, and show the setup screen …

• Sun Microsystems XVR-2500 (84 pages) Sun Microsystems, Inc.www.sun.comSubmit comments about this document at: http://www.sun.com/hwdocs/feedbackSun™XVR-2500Graphics AcceleratorInstallation and User’s GuidePart No. 817-7517-10January 2006, Revision A …

• Diamond Multimedia ATI Radeon HD 4350 PCIE (1 pages) DIAMOND MULTIMEDIA - SPECIFICATION SHEETSKU 4350PE512HPBRAND HD 4300February 4, 2011 - 6:24 amENG APVD - LK 2009-03-10MRKTG APVD - MS 2009-03-10SKU 4350PE512HPPRODUCT DIAMOND AMD ATI Radeon™ HD 4350 PCIE 512MB DDR2 Low Profile Video CardPRODUCT SHORT DESCRIPTIONINTERFACE PCI Express x16GPU HD 4350CORE CLOCK 600 MHZMEMORY CLOCK 800 MHzMEMORY CONFIGURA …

• ATI Technologies 3D XPRESSION (19 pages) Report No: BWS-03-EF-0027 FCC ID : PAQXPERT2000 Date of Test : June 18, 2003 Unitech Electronics Co., Ltd. VGA Card Xpert2000Pro Appendix 5. User Manual Refer to the following pages …

Comments, Questions and Opinions: