3M 11-81336-225 - MicroTouch M150 High Brightness Operation & User’s Manual

Text of 3M 11-81336-225 - MicroTouch M150 High Brightness User Guide:

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 8 3M™ MicroTouch™ Display M1500SS User Guide 3M Touch Systems, Inc. Proprietary Information CAUTION To avoid the risk of electric shock which may result in minor or moderate injury: • Do not service the display. • There are no user serviceable parts inside. • Refer all servicing to qualified service personnel. • Do not remove the cover or back of the display. Unplug the display from the power outlet and refer servicing to qualified service personnel in the event that: • Liquid is spilled into the product or the product is exposed to rain or water. • The product does not operate properly

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 3M™ MicroTouch™ Display M1500SS User Guide 9 3M Touch Systems, Inc. Proprietary Information Document #19-258 Rev AG CHAPTER 1 Introduction to Flat Panel Displays Overview The 3M Touch Systems product line of Flat Panel Display (FPD) touch displays offers the M1500SS Display for desktop and countertop applications with built-in multimedia options. The display is available with 3M Touch System’s ClearTek® surface capacitive touch sensor. Surface capacitive is the touch sensor of choice for public access applications requiring high levels of durability and reliable performance 24 hours a day,

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 3M™ MicroTouch™ Display M1500SS User Guide 27 3M Touch Systems, Inc. Proprietary Information Document #19-258 Rev AG The Miscellaneous Menu contains three options: Reset, OSD Position, and System info. • Reset is used to reload all factory default parameters. • OSD position is used to setup the OSD menu position – horizontal and vertical position is adjusted separately. Each position item will bring up the slider window – the maximum value of the sliders is based on the size of the OSD menu. • System Info

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 3M™ MicroTouch™ Display M1500SS User Guide 25 3M Touch Systems, Inc. Proprietary Information Document #19-258 Rev AG Contrast Selecting the Contrast option will allow you to adjust the contrast of the display. Adjust the contrast using the Ż/left and Ź/right arrow buttons, and press SELECT to confirm the new setting. Color When you choose the Color option from the OSD, this will bring up a sub-menu that allows you to adjust the RGB or Black Level color balance for your display. Use the Ż/left and Ź/right arrow buttons to scroll through the color menu. You can also use the Auto C

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 3M Touch Systems, Inc. Proprietary Information Document #19-258 Rev AG  0  0LFUR7RXFK   'LVSOD\066 8VHU*XLGH            5HDGDQGXQGHUVWDQGDOOVDIHW\LQIRUPDWLRQ FRQWDLQHGLQWKLVGRFXPHQWEHIRUHXVLQJWKLVSURGXFW 1

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 3M™ MicroTouch™ Display M1500SS User Guide 31 3M Touch Systems, Inc. Proprietary Information Document #19-258 Rev AG Troubleshooting the Touch Sensor If you are experiencing problems with the touch sensor, check the following list of common installation errors. Table 4 Common Sensor Installation Issues Common Installation Issues Possible Solutions Sensor does not respond to touch • Review the installation procedures. Are all cables connected properly? • After you installed touch software, did you restart your PC to

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 22 3M™ MicroTouch™ Display M1500SS User Guide 3M Touch Systems, Inc. Proprietary Information Installing Touch Software A MicroTouch™ MT 7 driver is required to operate your M1500SS Display. To enhance your touch experience, refer to the MT7 Software User Guide for complete instructions. These drivers and relevant technical documentation can be found on the enclosed 3M Touch Solutions CD (31197) and are also available for download from our website at www.3m.com/touch . After the software is install

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 4 3M™ MicroTouch™ Display M1500SS User Guide 3M Touch Systems, Inc. Proprietary Information Chapter 4 Maintenance and Troubleshooting Maintaining Your Touch Display ........................................................................... 29 Touch Sensor Care and Cleaning ............................................................................ 29 Display Installation Problems ................................................................................. 30 Troubleshooting the Touch Sensor ......................................................................... 31 Power Management ...................................................

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 3M™ MicroTouch™ Display M1500SS User Guide 23 3M Touch Systems, Inc. Proprietary Information Document #19-258 Rev AG CHAPTER 3 Video Display Options This chapter provides guidelines for adjusting the video display and using the display controls to adjust the image to your liking. Before you make any adjustments: • Be sure to adjust the controls in your normal lighting conditions. • Display a test image or pattern whenever you adjust the video. Adjusting the M1500SS Video Display Your M1500SS Display has four controls to adjust the video display. • MENU

• 3M™ MicroTouch™ Display M1500SS User Guide 29 3M Touch Systems, Inc. Proprietary Information Document #19-258 Rev AG CHAPTER 4 Maintenance and Troubleshooting If you have a problem setting up or using your display, you may be able to solve it yourself. Before calling 3M Touch Systems, try the suggested actions that are appropriate to the problems you are experiencing wit

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 3M™ MicroTouch™ Display M1500SS User Guide 7 3M Touch Systems, Inc. Proprietary Information Document #19-258 Rev AG CAUTION To avoid the potentially hazardous situations associated with the use of isopropyl alcohol which may result in minor or moderate injury or property damage: Follow all instructions and recommendations in the manufacturer's Material Safety Data Sheet and product label. To avoid possible environmental contamination which may result in minor or moderate injury: • The lamp(s) inside this product contain mercury (Hg) and must be recycled or disposed of in accordance with

• 20 3M™ MicroTouch™ Display M1500SS User Guide 3M Touch Systems, Inc. Proprietary Information Cable Management System Figure 11 Removing the Cable Management Cover Once you have connected your M1500SS Display to your computer, you should take advantage of the cable management system designed into the base of the M1500SS Display as shown above. In order to pr

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 12 3M™ MicroTouch™ Display M1500SS User Guide 3M Touch Systems, Inc. Proprietary Information Unpacking Your Touch Display Carefully unpack the carton and inspect the contents. Your M1500SS Display includes the following cables as well as a touch software CD. Figure 2 Cables Included with Your M1500SS 15-pin video cable 9-pin RS-232 serial communication cable (if applicable) AC/DC power supply (12V DC output) AC power cable USB Cable (if applicable) Multimedia audio cables Arm Mounting Option The unit has a 75 mm VESA mounting pattern on the back to allow for arm mount c

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 3M™ MicroTouch™ Display M1500SS User Guide 11 3M Touch Systems, Inc. Proprietary Information Document #19-258 Rev AG CHAPTER 2 Setting Up Your M1500SS Display This chapter describes how to set up and integrate your 3M TM MicroTouch TM M1500SS Display into a touch application system. You need to complete the following tasks: • Unpack the components • Connect the video and power cables to your computer • Power on the display and test your setup • Install the MT 7 software then connect the sensor cable • Calibrate the touch sensor System Requirements The M1500SS Display requires a personal computer (PC). This touch di

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 18 3M™ MicroTouch™ Display M1500SS User Guide 3M Touch Systems, Inc. Proprietary Information Connecting the Display CAUTION You are cautioned that any change or modification to the equipment not expressly approved by the party responsible for compliance could void your authority to operate such equipment. To connect the M1500SS Display: 1. Turn off your computer. You should always turn off the computer before connecting or disconnecting any device. 2. Connect one end of the video cable to the vid

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 16 3M™ MicroTouch™ Display M1500SS User Guide 3M Touch Systems, Inc. Proprietary Information Using the Standard Controls for the Video Card In addition to the standard controls on the display, each video card has several controls that let you adjust the display settings. The software and driver for each video card is unique. In most cases, you adjust these settings by using a program or utility provided by the manufacturer of the video card. For example, you can use the Windows Display Properties control panel to adjust the desktop area (resolution), color depth,

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 3M™ MicroTouch™ Display M1500SS User Guide 13 3M Touch Systems, Inc. Proprietary Information Document #19-258 Rev AG Figure 3 Disassembling the Yoke & Base for Arm Mounting Countertop Base Mounting Option Keyhole slots in the bottom of the base plate enable you to secure the unit to a desktop or countertop. Use standard screws in the desktop or countertop and then slide the base plate on for a secure fit. Note: A full size template has been included in the back of this manual for your convenience. Simply tear out the template and drill directly through the holes indicated to secure your display to any surface. Fi

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 26 3M™ MicroTouch™ Display M1500SS User Guide 3M Touch Systems, Inc. Proprietary Information • H-Position is used to adjust the horizontal image position manually. • V-Position is used to adjust the vertical image position manually. Image Use the Ż/left and Ź/right arrow buttons to scroll through the image menu. Phase: If the phase of your display is not fine-tuned, you may observe unstable horizontal noise lines and cross-talk stretching from the edge of small windows on your display. If you change your display to Windows shut down mode, this noise will be more visible, and easier to eliminate. Click on the "Start" button at the bottom right s

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 3M™ MicroTouch™ Display M1500SS User Guide 19 3M Touch Systems, Inc. Proprietary Information Document #19-258 Rev AG CAUTION To avoid the risk of electric shock which may result in minor or moderate injury:  The socket-outlet should be installed near the equipment and should be easily accessible.  Use a power cable that is properly grounded. Always use the appropriate AC cord certified for the individual country. Some examples are listed below: USA UL Switzerland SEV Canada CSA Britain B

• 14 3M™ MicroTouch™ Display M1500SS User Guide 3M Touch Systems, Inc. Proprietary Information Access to the Video Controls The controls for adjusting the video display are located on the front of the M1500SS Display. These buttons let you display the on-screen menu and adjust the phase, image position, contrast, and brightness. Make sure you have unobstructed access to the

• 3M 11-81336-225 - MicroTouch M150 High Brightness, 3M™ MicroTouch™ Display M1500SS User Guide 3 3M Touch Systems, Inc. Proprietary Information Document #19-258 Rev AG Contents Overview Important Safety Information .................................................................................... 5 Service and Repair Indicators ................................................................................... 7 3M Touch Systems Support Services ....................................................................... 8 Contact 3M Touch Systems ...................................................................................... 8

• 3M™ MicroTouch™ Display M1500SS User Guide 15 3M Touch Systems, Inc. Proprietary Information Document #19-258 Rev AG Note: When the adjustment knob is horizontal it is locked; when it is in the vertical position it is unlocked. Always maintain adequate ventilation to protect the display from overheating and to ensure reliable and continued operation. Inst

Related Products and Documents (Monitor):

Comparable Devices:

Similar Resources:

• HP N220 (5 pages) EL-MF877-00 Page 1 Template Revision B PSG instructions for this template are available at EL-MF877-01 Product End-of-Life Disassembly Instructions Product Category: Monitors and Displays Marketing Name / Model [List multiple models if applicable.] HP N220 Display Purpose: The do …

• HP NP447A (11 pages) 1. 1. 1. 1. Menu/selectMenu/selectMenu/selectMenu/select: Opens, selects or exits the OSD menu.4.Power LEDPower LEDPower LEDPower LED: fully powered = green; sleep mode = amber;sleep timer mode = flashing amber.2.2.2.2."-"/Auto"-"/Auto"-"/Auto"-"/Auto: Navigates backward through the OSD menu anddecreases adjustment l …

• AOC F22S (1 pages) F22SF22SCabinet ColorPiano-black Glossy FinishPanelTFT Active Matrix LCDPanelTFT Active Matrix LCD21.5" Widescreen, 16:9 Aspect Ratio21.5" Viewable Image Size, DiagonalPixel Pitch0.248 x 0.248mmDisplay Area477.5mm x 268.5mmBrightness300 cd/m2 (typ)Contrast Ratio30,000:1 (dynamic)Response Time5ms (typical)Response Time5ms (typical)Viewing AngleHoriz …

• Tannoy CMS801 DC BM (8 pages) 6481 0499Tannoy has a policy of continuous improvement and this specification sheet provides the latest information at the time of printing.All specifications may be subject to further change. Please contact the Tannoy website for the latest information.CMS 801 DC TEMPLATE HOLE CUTOUT SIZE: 295mm (11.61”)CMS 801 DC BMCMS 801 DC PICMS 801 DC back-canCMSCEI …

• Compaq 226824-001 - ProLiant - ML750 (10 pages) Fully-Buffered DIMM technology in HP ProLiant servers technology brief Abstract.............................................................................................................................................. 2 Introduction........................................................................................................................... …

• Garmin Mobile 20 (1 pages) DECLARATION of CONFORMITYApplication of Council Directive: 89/336/EEC, 1999/5/ECStandard to which Conformity is Declared: EN 60950-1:2001 Safety of Information Technology EquipmentEN 55022:1998 (CISPR 22: 2002) Information technology equipment - Radio disturbance characteristics EN 300 328 V1.6.1 Electromagnetic Compatibility and Radio Spectrum Matters: Wide …

Comments, Questions and Opinions: