Manualios.com

NEC Quadro K5200 Operation & User’s Manual

NEC Quadro K5200 Manual Online:

3.75, 1626 votes
NEC Quadro K5200 User Manual
NEC Quadro K5200 User Guide
NEC Quadro K5200 Online Manual

Text of NEC Quadro K5200 User Guide:

  • 19 2.1 Precautions on handling the card ・ It is recommended to ask your sales representative to install this product in your workstation. Refer to the User's Guide of workstation when installing this product. ・ The electronic components used in this product may be damaged by electrostatic discharge. Take an appropriate anti-static measures (e.g.,

  • NEC Quadro K5200, 33 4.1.2 Specifying Screen Resolution, Color Depth, and Refresh Rate ・Screen resolution Use the [Screen Resolution] window to change the resolution. ・About Screen resolution The larger screen resolution can display many information at a time, however, on the contrary, the pixel size become small and a display may become hard to view. In addition, since the maximum resolution that can be displayed depends on the performance of the monitor to be connected. Specify the resolution appropriate to your monitor according to the instruction manual of your monitor. CRT monitor: Select an appropriate resolution according to the table sh

  • NEC Quadro K5200, 39 [Set Up Digital Audio] [Adjust Desktop Size and Position] [Set Up Multiple Displays] [Adjust Desktop Size and Position] You can select a scaling mode. [Set Up Multiple Displays] You can specify how you would like to use multiple displays. [Set Up Digital Audio] You can select displays for audio playback.

  • NEC Quadro K5200, 23 3.3 ディスプレイドライバのアンインストール 以下の手順に従ってディスプレイドライバをアンインストールしてください。 (1) OS を起動後 Administrator 権限のあるアカウントでログインする。 (2) [Windows 7]の場合は、[スタートメニュー]⇒[コントロールパネル]⇒[プログラムのアンインスト ール]の順にクリックする。 [Windows 8]の場合は、スタート画面で右クリックし、画面右下[すべてのアプリ]⇒[コントロール パネル]⇒[プログラムのアンインストール]の順にクリックする。 [Windows 8.1]の場合は、�

  • NEC Quadro K5200, 1 このユーザーズガイドは、必要なときにすぐ参照できる様、お手元に置いておくようにしてください。 「使用上のご注意」を必ずお読みください。 使用上のご注意(必ずお読みください) 本製品を安全に正しくご使用になる為に必要な情報が記載されています。 また、本文中の名称についてはユーザーズガイドの「各部の名称と機能」の項をご参照ください。 本製品を安全にお使いいただくために、このユーザーズガイドの指示に従って操作してください。 このユーザ�

  • NEC Quadro K5200, 35 4.1.3 NVIDIA Control Panel ・Opening [NVIDIA Control Panel] Right– click anywhere on desktop to open the menu. Click [NVIDIA Control Panel] to select it. ・On the [NVIDIA Control Panel], use the main task pane and the navigation tree pane to setup drivers. ・The main task pane is used to setup the graphics driver. From the next time, the Control Panel opens the page that was viewed last. ・In the navigation tree pane, the tasks available on Control Panel are displayed in tree structure. The following categories are available: ・3D Settings - Configure the 3D performance and the picture quali

  • 16 Contents Safety Indications ................................................................................................................................................ 1 Symbols used in this manual and on warning labels ....................................................................................... 2 Safety Precautions ~ Be sure to read

  • NEC Quadro K5200, 9 Installation, relocalisation, stockage et connexion CAUTION N'installez et ne rangez le poste de travail dans aucun endroit autre que ceux spécifiés. N'installez pas et ne rangez pas le poste de travail dans les endroits mentionnés ci-après, ou tout endroit autre que ceux spécifiés dans ce Guide de l’Utilisateur. Si vous ne suivez pas cette instruction, vous risquez de provoquer un incendie. ・Endroit poussiéreux ・Endroit humide comme près d'une chaudière ・Endroit exposé à la lumière directe du soleil ・Endroit instable N'utilisez pas le poste de travail dans un enviro

  • NEC Quadro K5200, 13 2.2 カードの実装 (1) 本体装置と周辺装置の電源が切れている事を確認して、本体装置の電源プラグを抜く。 (2) 本体装置に添付されているユーザーズガイドにしたがって本体装置のカバーを取り外す。 (3) 本体装置に添付のユーザーズガイドにしたがって、PCI-Express(x16)スロットのスロットカバー、 もしくは実装されている PCI-Express カードを固定しているねじもしくは固定治具を外し�

  • NEC Quadro K5200, 8 単品で出荷時の場合、本製品には保証書がついています。内容をお確かめの上、大切に保管してく ださい。本体装置組込み出荷時の場合は、本体装置の保証書及び本体装置のユーザーズガイドをご 覧ください。 保障期間後の修理についてはお買い求めの販売店、最寄の NEC または保守サービス会社に連絡して ください。 ・NEC 製以外(サードパーティ)の本体装置、NEC が認定していない装置やインターフェースケー ブルを使用したために起きた故障については、その責任を負いかねますので�

  • NEC Quadro K5200, 26 4.1.2 画面の解像度、表示色数、リフレッシュレートの設定 ・画面の解像度 画面の解像度の変更は、[画面の解像度]で行うことができます。 ・画面の解像度について 画面の解像度が大きいほど多くの情報を同時に表示することができますが、反対に画素(ピクセル)のサ イズは小さくなり表示が見にくくなる場合があります。また表示できる最大の解像度は接続するモニタ の性能にも左右されるのでモニタの取り扱い説明書を参照して設定を�

  • NEC Quadro K5200, 7 ああ Attention Ceci signale qu'il y a un risque d’incendie ou de fumée. Ceci signale la présence de risques de décharge électrique. Ceci signale la présence d'une surface ou d'un composant réchauffé. Tout contact avec cette surface risque de provoquer une blessure corporelle. Ceci signale un avis ou un avertissement général qui ne peuvent pas être identifiés spécifiquement. Actions qui sont interdites Ne démontez pas, ne réparez pas ou ne modifiez pas le poste de

  • NEC Quadro K5200, 3 全般的な注意事項 注意 装置内に水や異物を入れない 本製品や本体装置内に水などの液体、ピンやクリップなどの異物を入れないで ください。 火災や感電、故障の原因となります。もし入ってしまったときは、ただちに本体 装置の電源を OFF にして、本体装置の電源プラグをコンセントから抜いてくださ い。分解しないで販売店または保守サービス会社にご連絡ください。 安全上のご注意 ~ 必ずお読みください ~ 警告 人命に関わる業務や高度な信頼性を必要とする業務に�

  • NEC Quadro K5200, 4 Installation, storage, and connection CAUTION Do not install or store the product in any place other than specified. Do not install the product in the following places or any place other than specified in the User's Guide of workstation. Failure to follow this instruction may cause a fire. ・A dusty place. ・A humid place such as near a boiler. ・A place exposed to direct sunlight. ・An unstable place. Do not use the product in an environment where corrosive gas is present. Do not install or use the product in a place su

  • NEC Quadro K5200, 44 6.4.4 DVI-VGA変換コネクタ Quadro K5200 の DVI-I コネクタに DVI-VGA 変換コネクタを接続することで VGA コネクタによるアナログ出 力が可能になります。 VGA (D-sub15Pin)コネクタ・インターフェース Dsub-15Pin コネクタのピン配置(アナログ) ピン番号 信号名 1 赤出力 2 緑出力 3 青出力 4 モニタ ID0 5 DDC グランド 6 赤グランド 7 緑グランド 8 青グランド 9 +5V 電源 10 同期信号グランド 11 モニタ ID2 12 DDC データ 13 水平同期 14 垂直同期 15 DDC クロック (�

  • NEC Quadro K5200, 42 6.4 モニタインターフェース・コネクタ仕様 Quadro K5200は映像出力用として2つのDisplay-Portコネクタと、1つのデジタル・アナログ統合型 Digital Visual Interface (DVI-I) とデジタル専用Digital Visual Interface (DVI-D)を装備しています。 [複数画面でのプライマリモニタの識別について] ・ DVI-I コネクタと Display-Port コネクタを使用した複数画面の場合は DVI-I コネクタへ接続してい るモニタが、優先的にプライマリモニタとして識別されます。 ・ 2 つの Display-Port コネクタ�

  • 39 6.1 外観 6.各部の名称と機能 No. 部品名 1 Quadro K5200 (グラフィックスアクセラレータ・チップ) 2 PCI-Express 外部電源コネクタ 3 PCI-Express カードエッジコネクタ 4 GDDR5-SGRAM 5 Display-Port コネクタ2 6 Display-Port コネクタ1 7 DVI-I

  • NEC Quadro K5200, 18 This section describes how to install hardware and software. Installation procedure depends on whether the other graphics accelerator is installed in your system or not. Follow the steps below to install them appropriately to your system. Even if Quadro K5200 is already installed in your system, you need to install the display driver. (1)If any graphics accelerator other than Quadro K5200 is installed, be sure to uninstall other display driver before installing Quadro K5200. When uninstalling display driver, restart the system and make sure that the system starts normally. ※To unin

  • NEC Quadro K5200, 30 [PhysX 構成の設定] ※内容について以下に説明していますが、弊社としてはサポート外の機能となっています。 (Ⅱ)[ステレオスコピック 3D] 「ステレオスコピック 3D」のカテゴリ内には次の項目があります。 ・ステレオスコピック 3D を設定します ・ゲームとの互換性を表示します ※内容について以下に説明していますが、弊社としてはサポート外の機能となっています。 [ステレオスコピック 3D を設定します] [ゲームとの互換性を

  • NEC Quadro K5200, 14 If at the time of shipment separately, comes with a warranty on this product. It confirms it on the content, please keep it in a safe place. In the case of when the workstation is built shipment, please refer to the warranty and User's Guide of the workstation. For the product of its warranty period expired, contact your sales agent or service representative. ・N E C assumes no liability for malfunction of the product resulted from using the third-party workstation, devices and interface cables not authorized by NEC.

  • NEC Quadro K5200, 50 6.4.2 DVI-I Connector Interface DVI-I connector has a digital section composed of 24 contacts (8 contacts by 3 rows) and an analog section composed of 5 contacts. DVI-I connector can output analog signals by connecting a provided DVI to VGA connector in addition to digital connection by DVI interface. Use the provided DVI to VGA connector to output an analog signal by this board. 6.4.3 DP to DVI Connector Connecting a separately priced DP to DVI connector to Display-Port connector on Quadro K5200 allows digital signal output by DVI–D. (Inp

  • NEC Quadro K5200, 29 (Ⅰ)[3D 設定] 「3D 設定のカテゴリ」の内には次の項目があります。 ・ プレビューによるイメージ設定の調整 ・ 3D 設定の管理 ・ PhysX 構成の設定 各項目の内容について以下に説明しています。 [プレビューによるイメージ設定の調整] [3D 設定の管理] [プレビューによるイメージ設定の調整] それぞれの設定変更に対しての画質をプレビ ューできます。

  • NEC Quadro K5200, 2 ああ 注意の喚起 発煙又は発火のおそれがあることを示し ます。 感電のおそれのあることを示します。 高温による障害を負うおそれがあること を示します 特定しない一般的な注意・警告を示しま す。 行為の禁止 本製品を分解・修理・改造しないでくださ い。感電や火災のおそれがあります。 水や液体がかかる場所で使用しないで ください。水にぬらすと感電や

  • NEC Quadro K5200, 27 ・表示色数の設定 画面の表示色数の変更は、[画面の解像度]にある[詳細設定(V)]をクリックして現れる[汎用 PnP と NVIDIA Quadro K5200 のプロパティ]で行ないます。[モニタ]のタブをクリックし[色(C)]のプル ダウンメニューから表示したい色数を選択して、[OK]をクリックしてください。 ※8 ビット(256 色)を選択したい場合は、[アダプタ]タブの[モードの一覧]から行ってください。 ・表示色数について Quadro K5200 では、256 色、65536 色、TrueColor の表示色数

  • NEC Quadro K5200, 5 取り扱い・お手入れに関する注意事項 運用中の注意事項 注意 雷がなったら触らない 雷が鳴りだしたら、ケーブル類も含めて本体装置には触れないでください。ま た、機器の接続や取り外しも行わないでください。落雷による感電のおそれが あります。 警告 自分で分解・修理・改造はしない 本書に記載されている場合を除き、絶対に分解したり、修理・改造を行ったり しないでください。本製品が正常に動作しなくなるばかりでなく、感電や火災 の危険があります。 注意

  • NEC Quadro K5200, 45 5.5 Performance is insufficient ・Installation of display driver is incorrect, or the file may be destroyed. Install software again according to Section 3.1. ・The specified screen mode may not support 3D graphics application. Confirm or modify the drawing area and color. ・If the mouse cursor is drawn by software, the performance may be lowered slightly. If the large cursor or color cursor is specified, the drawing of mouse cursor is not performed by hardware, but by software. In this case, use the Windows standard mouse cursor.

  • 9 目次 安全に関わる表示について .................................................................................................................................. 1 本書およびラベルで使用する記号とその内容 ................................................................................................. 2 安全上のご注意 ~ 必ずお読�

  • NEC Quadro K5200, 18 2.3 カードの取り外し ※カード取外しの際には、PCI-Express スロットにある固定機構(図1)の解除方法を確認し、正しく 解除した上でカードの取り外しを行う必要があります。 ※固定機構が解除されないままカードの取り外しを行うと、固定機構が破損する恐れがありますのでご 注意ください。 (1) 本体装置と周辺装置の電源が切れている事を確認して、本体装置の電源プラグを抜く。 (2) 本体装置と接続しているモニターを外す。 (3) 本体装置に添付されているユ�

  • 17 (7) モニタケーブルの接続 Quadro K5200 は映像出力用に、DVI-I コネクタを 1 つ、DVI-D コネクタを 1 つ、Display-Port コ ネクタを 2 つの計 4 つのコネクタを持っています。モニタへの接続方法は、次のように行ってく ださい。 アナログモニタ(CRT モニタ、LCD モニタ)に接

Related Products and Documents (Video Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Philips 107T66 Technical specifications philips/107t66-HUU.pdf 03 Aug 2022 2 0.39 Mb
2 Novus NVC-150B Operation & user’s manual novus/nvc-150b-P77.pdf 03 May 2023 7
3 Canon PowerShot S45 Quick start manual canon/powershot-s45-D57.pdf 14 Sep 2023 32 0.79 Mb
4 Xerox WorkCentre 6400S Manual  xerox/workcentre-6400s-46E.pdf 12 Nov 2023 8 0.94 Mb
5 THERMA Cooker hood Instruction on mounting and use therma/cooker-hood-44C.pdf 01 Sep 2022 4
6 Triton T80Z SLIMLINE Installation and operating instructions manual triton/t80z-slimline-SVV.pdf 27 Aug 2022 28

Similar Resources:

  • MSI

    RX1650GT-T2D256EZ

    (2 pages)
    G52-V8032Xx April 2007Int erartnaS-tioorncialMTEL. 886-2-32345599FAX. 886-2-32345488http://www.msi.com.twUnder the European Union ("EU") Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of "electrical and electronic equipment" cannot be discarded as municipal w …
  • Diablotek

    VX1950GT-512A

    (1 pages)
    VIDEO CARD Model NO.: VX1950GT-512A UPC NO.: 843636001290 Description: ATI RADEON X1950GT 512MB AGP Video Card SPEC: • Chip : ATI Radeon X1950GT • Interface : AGP, 8X • Memory : 512MB • Signal out-put : VGA, DVI, HDTV/S-Video Feature: • Superior Gaming Performance and Image Quality • Watch Stunning, High-Definition Video on Your PC • …
  • Amulet Hotkey

    DXG

    (2 pages)
    www.amulethotkey.comDXG Quick Start Guide (Dual Slot Form factor) v3.4 June 2016HB-DXMG-0004solutions you can bank onAMULETHOTKEY®®Quick Start GuideDual slot form factorGraphics Virtualization Card for Dell 13G M-series blade serversDXGThis guide tells you how to install and configure a dual slot DXG GraphicsVirtualization Card on a Dell Power Edge M630 bl …
  • Gigabyte

    GV-R545OC-512I

    (32 pages)
    GV-R545SC-1GI/GV-R545OC-512IATI RadeonTM HD 5450 Graphics AcceleratorUser's ManualRev. 10112MM-R545S-101RCopyright© 2010 GIGABYTE TECHNOLOGY CO., LTDCopyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmittedin any form without the expressed, written permission of GBT.TrademarksThird-party bra …
  • Gigabyte

    GV-N560OC-1GI

    (28 pages)
    GV-N560OC-1GINVIDIA® GeForceTM GTX 560 Ti Graphics AcceleratorUser's ManualRev. 10112MM-N560-101RCopyright© 2011 GIGABYTE TECHNOLOGY CO., LTDCopyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any form without the expressed, written permission of GBT.TrademarksThird-party brands and …
  • MSI

    NX8800GTS-T2D320E-HD

    (2 pages)
    Hardware InstallationSoftware Installation (for ) Windows XP/ 2000R To install the driver of the VGA card to your computer running CDWindows XP or 2000, please follow the steps below:1. Turn on the computer.2. Insert the into the CD-ROM drive. The Autorun program will start the Setup program, and show the setup screen as follows:RTip : If, on your comp …

Comments, Questions and Opinions: