Manualios.com

AE RC10B6 Instruction Manual

AE RC10B6 Manual Online:

4.05, 538 votes
AE RC10B6 User Manual
AE RC10B6 User Guide
AE RC10B6 Online Manual

Text of AE RC10B6 User Guide:

  • AE RC10B6, Stroke Stroke Up E C D A B Down 3 3 3 3 2 2 2 2 B B B C A A A 1 1 1 1 Driver: Event: Date: Track: Qualify: TQ: Main: Finish: Best Lap Time: :: For more setups, visit RC10.com and click on “Setup Sheets” Front Suspension: Rear Suspension: Electronics: Track Info: Drivetrain: Tires: Body, Wing, Weight: Vehicle Comments: Shocks: Slipper Clutch: Ride Height: Arm Type: Bulkhead Type: Camber: Tower Type: Kick-Up Angle: Ride Height: Wheel Hex: Radio: Toe: Caster Block Insert: Wheel Hex: Camber: Battery Position: Type: ESC Settings: Motor: Battery: # of Pads:

  • AE RC10B6, 4 :: Table of Contents :: Notes This symbol indicates a special note or instruction in the manual. Scanning this QR code will take you to Team Associated’s Tech Tips videos. These videos will help you with your build and setup! This symbol indicates a Racers Tip. 1................... Cover 2................... Introduction 3...................1:1 Hardware “Fold Out” 4................... Table of Contents 5....................Bag 1 5 - 7..............Bag 2 - 4 7 - 8..............Bag 5 - 8 8 - 9..............Bag 9 - 10 9 - 11............Bag 11 - 14 12.................Bag 15 - 16 13.................Bag 17 14.................Bag 18 - 19 14 - 16......

  • 27 :: Chassis 6338 25201 25202 25204 25225 91650 91652 91670 91685 91686 91692 91734 92014 1 20 20 20 20 1 Pr. 1 1 ea. 1 1 1 4 ea. Antenna Tube & Cap (black) M3 x 8mm FHCS M3 x 10mm FHCS M3 x 16mm FHCS M3 x 3mm Set Screw Chassis, B6 Side Rails, B6 Hinge Pin Set, B6 Bumpers, B6 Aluminum Arm Mount (C), B6 Rear Gear Box Brace, Arm Mount (D), B6 Battery Foam, B6 Arm Mount Inserts 1 1 4 ea.

  • 11 :: Bag 11-14 - Step 8 :: Bag 11-14 - Step 7 :: Bag 11-14 - Step 6 31532 M3 x 8mm BHCS x2 25202 M3 x 10mm FHCS x8 Set nut flush with top shaft. See page 19 for gear mesh, and slipper clutch setting instructions! ! ! There’s also a 72T 48P spur gear (#9649) included for stock motor use! ! 25202 M3 x 10mm FHCS x3 91715 Lay-down Motor Plate x2 x2 7485 FT V2 Slipper Hub 9603 Slipp

  • AE RC10B6, 18 :: Bag 24-26 - Step 7 :: Bag 24-26 - Step 6 Body Trimming / Mounting: There are 3 body trimming options depending on what transmission and shock position you choose to run. Cut Line A: Laydown Transmission / Rear Shocks mounted in rear of arm. Cut Line B: Laydown Transmission / Rear Shocks mounted in front of arm. Cut Line C: 3 Gear Stand Up Transmission. Wheels / Tires and Inserts are not included! Wheels / Tires and Inserts are not included! #1597 ca glue #1597 ca glue Carefully apply ca glue (tire adhesive) to the tire bead on the side. Do one side at a time, allowing it to dry befor

  • AE RC10B6, 23 :: Slipper Clutch 7485 9603 9648 9649 9650 9651 9652 9653 9739 91148 91423 2 2 1 1 1 1 1 1 1 4 2 FT V2 Slipper Hubs Slipper Pad 69T 48P Spur Gear 72T 48P Spur Gear (Kit) 75T 48P Spur Gear 81T 48P Spur Gear 78T 48P Spur Gear (Kit) 84T 48P Spur Gear Slipper Spring M4 Locknut, w/flange and knurl Slipper Spring Adapter :: Transmission 25202 31286 31532 89203 89218 91048 91132 91560 91563 91692 91693 91708 91709 91710 91715 91716 20 4 ea. 6 10 10 8 2 4 4 1 1 Pr. 1 1 1 1 M3 x 10mm FHCS Ball Stud Washers, Alum. (1mm, 2mm) M3 x 8mm BHCS M3 x 16mm BHCS 3 x 8mm Washer Heavy-duty Ballstud, 8mm

  • AE RC10B6, 19 :: Tuning Tips :: Painting Tips Tips for Beginners: Before making any changes to the standard setup, make sure you can get around the track without crashing. Changes to your vehicle will not be beneficial if you can’t stay on the track. Your goal is consistent laps. Once you can get around the track consistently, start tuning your vehicle. Make only ONE adjustment at a time, testing it before making another change. If the result of your adjustment is a faster lap, mark the change on the included setup sheet (make adddtional copies of the sheet before writing on it). If your adjustment results in a slower lap, revert back to th

  • 7 :: Bag 5-8 - Step 1 :: Bag 2-4 - Step 6 Build 2 (1 left, 1 right) x2 31531 M3 x 6mm BHCS 25215 M3 Locknut, black 91560 5 x 10 x 4 Bearing 91682 Front Axle 91679 Steering Block Arm 91677 Steering Block #1596 thread lock 91047 Heavy-duty Ballstud, 6mm :: Bag 2-4 - Step 5 89202 M3 x 12mm BHCS x2 The front hinge pin brace has a sharp edged side, and a r

  • AE RC10B6, 20 :: Tuning Tips (cont.) Rear Camber: Camber describes the angle at which the tire and wheel rides when looked at from the back. Negative camber means that the tire leans inward at the top. A good starting camber setting is -1°. Adding a small amount of positive camber, where the top of the tire is leaning out, will tend to improve straight-line acceleration on loose tracks. Optional #1719 camber gauge can be used to more accurately set camber. Slipper Clutch: The assembly instructions give you a base setting for your clutch. Turn the nut on the shaft so that the end of the top shaft is eve

  • AE RC10B6, 31 :: Notes :: Contact Information Associated Electrics, Inc. 26021 Commercentre Drive Lake Forest, CA 92630-8853 USA http://www.TeamAssociated.com http://www.RC10.com http://twitter/Team Associated http://bit.ly/AEonFacebook call: (949) 544-7500 fax: (949) 544-7501 Check out the following web sites for all of our electric kits, current products, new releases, setup help, tips, and racing info! www.TeamAssociated.com. - www.RC10.com

  • AE RC10B6, 24 :: Gear Differential 4675 9831 91462 91463 91464 91465 91605 91703 5450 5451 5452 5444 5453 5446 5454 5455 5466 5456 5457 5458 5448 5459 5461 5463 5465 6 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 M2.5 x 6 FHCS Gear Diff O-Ring Set Gear Diff Gear and Cover Gear Diff Rebuild, B5 FT Aluminum Gear Diff Cover Gear Diff Outdrives, B5 CVA Axle Shims Gear Diff Kit, B6 Silicone Diff Fluid 1,000CST Silicone Diff Fluid 2,000CST Silicone Diff Fluid 3,000CST Silicone Diff Fluid 4,000CST Silicone Diff Fluid 5,000CST Silicone Diff Fluid 6,000CST Silicone Diff Fluid 7,000CST Silicone Diff Fluid 10,000CST Silicone Diff Fluid 15,000CST Silicone Diff Fluid 20,

  • AE RC10B6, 25 :: Front Arm :: Rear Arm 25187 25188 25215 31286 31510 31531 31532 91048 91049 91560 91670 91673 91675 91676 91677 91679 91682 91738 20 20 20 4 ea. 6 6 6 8 8 4 1 2 Pr. 2 ea. Pr. 2 2 4 25187 25215 31510 71019 89218 91049 91436 91438 91439 91562 91563 91610 91611 91612 91670 91695 91697 91698 91738 20 20 6 2 10 8 4 1 1 4 4 2 4 2 1 Pr. Pr. 2 4 M3 x 14mm BHCS M3 x 20mm BHCS M3 Locknut, Black FT Ballstud Washer, aluminum (1mm, 2mm) M2 x 4mm BHCS M3 x 6mm, BHCS M3 x 8mm, BHCS Heavy-duty Ballstud, 8mm Heavy-duty Ballstud, 10mm FT Bearing, 5 x 10 x 4 Hinge Pin Set, B6 Front Arm, Gull-Wing, B6 Caster Block, B6 Caster Hat Bushing, B6 (0mm, 1mm, 2mm

  • AE RC10B6, 30 :: Tools 1111 1113 1449 1541 1545 1546 1554 1564 1567 1568 1569 1570 1590 1592 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1719 1737 3718 3719 3720 3987 6429 6956 7709 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 12 12 12 1 1 1 12 FT Turnbuckle Wrench 12mm Big Bore Shock Tool FT Off Road Ride Height Gauge FT Hex Driver Set, (7 pcs) FT 5/64” Blue Hex Driver FT 3/32” Gold Hex Driver FT Silver Spring Hook Tool FT 5.5mm Red Nut Driver FT 8mm Gold Nut Driver Factory Team 5.5mm Short Nut Driver Factory Team

  • AE RC10B6, Associated Electrics, Inc. 26021 Commercentre Dr. Lake Forest, CA 92630 USA http://www.TeamAssociated.com http://www.RC10.com http://twitter/Team_Associated http://bit.ly/AEonFacebook call: (949) 544-7500 - fax: (949) 544-7501 Check out the following web sites for all of our kits, current products, new releases, setup help, tips, and racing info! www.TeamAssociated.com. - www.RC10.com

  • AE RC10B6, :: Reedy ESC’s 252C 253C 254C 255C 256C 269C 270C 284C 285C 287C 27000 27001 27002 27003 27020 27021 27022 27023 27024 27025 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 :: Reedy Accessories 643 644 645 646 647 648 649 650 654 655 656 658 659 747 748 749 790 791 792 793 794 795 27304 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Low Profile Bullet Plug 4mm x 14mm (2) Low Profile Bullet Plug 4mm x 14mm (10) Low Profile Bullet Plug 5mm x 14mm (2) Low Profile Bullet Plug 5mm x 14mm (10) Silicone Wire 12AWG-Black (1m) Silicone Wire 14AWG-Black (1m) Silicone Wire 16AWG-Black (1m) Shrink Tubing - 15pcs 4.5mm x 20mm 4.0mm Bullet Plugs (2M, 2F) 4.0mm Bullet Plugs (2M, 10F) 4.0mm Bullet Plugs (10

  • :: Factory Team and Option Parts 7495 31286 91175 91176 91177 91178 91179 91389 91447 91450 91492 91495 91548 91549 91550 91553 91580 91581 91582 91583 91584 91585 91588 91589 91592 91593 91594 91595 91596 91597 91609 91612 91658 91659 91663 91668 91669 91672 91673 91674 91683 91687 91688 91696 91703 91707 91708 91711 91714 91715 91716 91735 91736 91745 91746 91747 91748 9

  • AE RC10B6, 3 :: Hardware - 1:1 Scale View Notes: 5/64 Diff Thrust Balls (6574) 3/32 Carbide Diff Balls (6581) 3/32 Ceramic Diff Balls (6584) Diff Balls 3x8mm (25201) Aluminum (8553) Titanium (91592) 3x10mm (25202) Aluminum (8555) Titanium (91593) 3x12mm (25203) Aluminum (8556) Titanium (91594) 3x14mm (89208) Aluminum (8567) Titanium (91595) 3x16mm (25204) Titanium (91596) 3x18mm (89209) Titanium (91597) Flat Head (fhcs) M3 Nut (91477) M3 Alum. Locknut, Blue (31550) M3 Locknut, Black (25215 M3 Locknut w/Flange (25612) FT 3mm Locknuts, Blu

  • 26 :: Rear Shock Tower :: Wheels 9690 9691 9695 9696 91570 91571 91572 91573 2 2 2 2 2 2 2 2 Buggy Front Wheel, hex, white Buggy Front Wheel, hex, yellow Buggy Rear Wheel Hex, white Buggy Rear Wheel Hex, yellow 61mm Buggy Rear Wheel, White 61mm Buggy Rear Wheel, Yellow 61mm Buggy Front Wheel, White 61mm Buggy Front Wheel, Yellow Not included in Kit! Not included in Kit! :: Front Shoc

  • AE RC10B6, 10 :: Bag 11-14 - Step 5 :: Bag 11-14 - Step 4 :: Bag 11-14 - Step 3 89203 M3 x 16mm BHCS x6 91709 Chassis Brace 91709 Pivot Ball 91560 5 x 10 x 4, Bearing 91463 Gear Diff Gasket 91465 Gear Diff Outdrive Pin 91463 Gear Diff Sun Gear 91563 10 x 15 x 4, Bearing 4675 M2.5 x 6mm FHCS 91708 Lay-down Gearbox (right & left) x2 x2 x4 Add a drop of Diff Lube (#6591) to the teeth of the diff gear, idler gear, and top shaft. ! #6591 diff lube 91560 5 x 10 x 4, Bearing 91710 Top Shaft 91716 Idler Gear 39T 91132 Idler Gear Shaft, Aluminum x2 Diff fluid #5444

  • AE RC10B6, 13 :: Bag 17 - Step 3 :: Bag 17 - Step 2 :: Bag 17 - Step 1 91722 Ball Cup 91722 Ball Cup 91722 Ball Cup 91722 Ball Cup 91722 Ball Cup 91722 Ball Cup 91723 Turnbuckle 3x48mm 91723 Turnbuckle 3x48mm 91723 Turnbuckle 3x48mm 28.75mm Steering Turnbuckle Build x2 (right and left side) Racers Tip: Use black grease (#6588) on the threads of the turnbuckles for easier ball cup installation! Racers Tip: Use black grease (#6588) on the threads of the turnbuckles for easier ball cup installation! Racers Tip: Use black grease (#6588) on the threads of the turnbuckles for easier ball cu

  • AE RC10B6, :: Bag 1 - Step 2 :: Bag 2-4 - Step 1 5 :: Bag 1 - Step 1 4/16 91667 Steering Bellcrank Brace x2 25188 M3 x 20mm BHCS Do not overtighten steering bolts. Make sure there is free movement in the steering rack. 91475 3 x 7 x 3 Ball Bearing 91475 3 x 7 x 3 Ball Bearing 91667 Steering Rack 91667 Steering Bellcrank (Right) Front 91667 Steering Bellcrank (Left) x4 x4 x2 x2 x2 x2 x2 91048 Heavy-duty Ballstud, 8mm 91049 Heavy-duty Ballstud, 10mm 31286 FT Ballstud Washer, Aluminum (2mm) 31286 FT Ballstud Washer, Aluminum (1mm) 91655 Front Ball Stud Mount 31286 FT Ballstud Washer, Aluminum (1mm

  • AE RC10B6, 21 :: Tuning Tips Ride Height: Ride height is the distance from the ground to the bottom of the chassis. The standard front ride height setting is 19mm (Ride Height Gauge #1449). Check the ride height by lifting up the entire car about 8-12 inches off the bench and drop it. After the suspension “settles” into place, measure ride height (Ride Height Gauge #1449). Raise or lower the shock collars as necessary. The rear ride height setting you should use most often is 19mm (Ride Height Gauge#1449). Check the ride height by lifting u

  • AE RC10B6, Stroke Stroke Up E C D A B Down 3 3 3 3 2 2 2 2 B B B C A A A 1 1 1 1 Driver: Event: Date: Track: Qualify: TQ: Main: Finish: Best Lap Time: :: For more setups, visit RC10.com and click on “Setup Sheets” Front Suspension: Rear Suspension: Electronics: Track Info: Drivetrain: Tires: Body, Wing, Weight: Vehicle Comments: Shocks: Slipper Clutch: Ride Height: Arm Type: Bulkhead Type: Camber: Tower Type: Kick-Up Angle: Ride Height: Wheel Hex: Radio: Toe: Caster Block Insert: Wheel Hex: Camber: Battery Position: Type: ESC Settings: Motor: Battery: # of Pads: ESC: Transmission: Notes:Wind: Pinion: Spur: Timing: Servo: Notes: 0°

Related Products and Documents (Toy):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Panasonic KW1M-H Operation & user’s manual panasonic/kw1m-h-QLH.pdf 31 Oct 2023 92
2 TFA 60.2528 Instruction manual tfa/602528-QMU.pdf 12 Sep 2023 50
3 Ecleree AC-6 Operation & user’s manual ecleree/ac-6-26M.pdf 17 Aug 2022 40
4 TriCoder Portable Bar Code Reader Owner's manual tricoder/portable-bar-code-reader-4B5.pdf 25 Feb 2023 245
5 pitsco Pulling Tractor Operation & user’s manual pitsco/pulling-tractor-9V8.pdf 18 Aug 2022 4
6 Fellowes Quasar Instructions manual fellowes/quasar-224.pdf 09 May 2023 14 3.3 Mb

Similar Resources:

  • Eduard

    ZOOM SS 704

    (2 pages)
    1/2SS 704detail set for 1/72 AIRFIX kit • sada detailů pro stavebnici 1/72 AIRFIX1/72SS 704ZOOMeduardREMOVEODSTRANITOPTIONVOLBAREPLACENAHRADITBENDOHNOUTGRINDOBROUSITSYMETRICAL ASSEMBLYSYMETRICKÁ MONTÁŽDRILL HOLEVRTAT OTVORAPPLY EXPRESS MASK AND PAINT BEFORE GLUINGPOUŽÍT EXPRESS MASK NABARVIT PRED SLEPENÍMCOLORED ETCHED PARTSLEPTANÉ BAREVNÉ DÍLYET …
  • LIGHT MY BRICKS

    LEGO Star Wars Death Star 75159 Lighting Kit

    (307 pages)
    The following page is the instructions for the Light My Bricks LEGO Star WarsDeath Star (75159) LED light kit.To ensure a trouble-free installation of your light kit, please read and followeach step carefully.If you run into any issues, please refer to the online troubleshooting guide.To download this instructions guide in PDF format please click here.Please …
  • roco

    FLEX 42660

    (8 pages)
    4266042661FLEX-BETTUNG 42660 (für Holzschwellenex)42661 (für Betonschwellenex)FLEX ROADBED42660 (for exible track with wooden sleepers)42661 (for exible track with concrete sleepers)LITS DE BALLASTréf. 42660 (pour voies exibles à travelage en bois)réf. 42661 (pour voies exibles à travelage en béton)MASSICCIATA FLESSIBILE42660 (per � …
  • Learning Resources

    Fruit and Vegetable Color Sorting Set

    (4 pages)
    © Learning Resources, Inc., Vernon Hills, IL, US Learning Resources Ltd., Bergen Way, King’s Lynn, Norfolk, PE30 2JG, UK Please retain our address for future reference. Made in China. LRM3060-GUD Hecho en China. Conservar estos datos. Fabriqué en Chine. Informations à conserver Hergestellt in China. Bitte bewahren Sie unser …
  • PIKO

    BR 247 VECTRON

    (12 pages)
    ALLGEMEINE BEDIENUNGSANLEITUNGFÜR ALLE DIESEL MODELLE DER BR 247 VECTRONInstructions for use diesel loco Manuel d’utilisation pour locomotive dieselGebruiksaanwijzing locomotiefD GB F NLUSADIESELLOKOMOTIVE BR 247 VECTRON …
  • Viessmann

    5079

    (8 pages)
    BedienungsanleitungOperation ManualIdeale Ergänzung:Zur Beleuchtung der Lichtboxen eignen sich die Haus-beleuchtungen mit LEDs mit gelbem oder weißem Licht (Art. 6007, 6008, 6017, 6018).www.viessmann-modell.deLED-Hausinnenbeleuchtung mit TV-Simulation5079LED House interior lighting with TV-simulation 1. Wichtige Hinweise / Important information ......... …

Comments, Questions and Opinions: