CANNICE Headblue 1 Instruction

Text of CANNICE Headblue 1 User Guide:

• CANNICE Headblue 1, Basic operation Adjust the volume LED indicator and voice prompts Instruction Power on Power off Pairing Standby Incoming call Battery low LED status Flashes blue twice Flashes red once Flashes red and blue alternately Flashes blue once every 8 seconds Flashes blue continuously Flashes red twice every 2 seconds Voice prompts Beep Tone from high to low / Continuous tone Warning tone Charging Flashes red while charging Flashes blue once fully charged / Tone from low to high Press the "+" or "-" button to turn volume up or down, you hear beep voice prompts once reach the maximum or minimum.

• CANNICE Headblue 1, Pair one phone 1. Press and hold the multifunction button for about 5 seconds, the LED indicator flashes red and blue, you hear voice prompt tone from low to high. 2. Activate the Bluetooth feature on your phone, and set it to search for new Bluetooth devices. Pairing Bluetooth ON Search

• CANNICE Headblue 1, 3. Select “Headblue1”. If you phone asks, enter 0000 (four zeros) for the passcode or accept the connection. The LED indicator stops flashing red and blue once successfully paired. Note:When the headphone and phone have been paired once, they will automatically connect when the headphone is on and Bluetooth is activated on the phone. Bluetooth ON Connect Headblue1

• CANNICE Headblue 1, Pair another phone Multipoint technology enables you to pair another phone and take a call from either. To pair with another mobile phone, follow the steps for “Pair One Phone”. After pairing successfully, restart the headphone to connect to 2 paired mobile phone automatically. Bluetooth ON Connect Headblue1 Bluetooth ON Connect Headblue1

• Call Answer a call Press the multifunction button once. When call rings,the LED indicator flashes blue continuously, you hear voice prompt of continuous tone. End a call Press the multifunction button once. Reject a call Press the multifunction button for 2 seconds. When call rings,the LED indicator flashes blue continuously, you hear voice prompt of continuous tone. Redial last call Double

• CANNICE Headblue 1, (Need media player support) Music Music play / pause Press multifunction button to play / pause music. (Some phones may require you to start a media player first), you hear "toot" once. Trackback Press "<<" button to skip track backward, you hear "toot" once. Trackforward Press ">>" button to skip track forward, you hear "toot" once. Fast forward Press and hold “>>” button until fast-forward begins. When you want to resume normal playback, rele

• CANNICE Headblue 1, Rewind Press and hold “<<” button until begins to rewind. When you want to resume normal playback, release the “<<” button. Switch music and calls When a call rings during a music playing, the music automatically pauses to allow you to answer or ignore the call. Once the call is ignored or ends, the music is resumed. EQ setting Press the EQ button to cycle through EQ setting: original, bass, treble, rock, pop. Note: the default EQ setting is original, the EQ setting will be restored to default o

• More features Battery indicator The current battery status of headphone will be displayed in top right corner after the headphone connected to iOS devices. Voice dial (Need phone support.) Press the multifunction button for 2 seconds, you hear "toot", wait for phone prompt and then tell the phone to dial the name of a stored contact.

• CANNICE Headblue 1, Listen music via USB cable 1. Connect the headset to a USB slot of PC using the supplied micro-USB cable. 2. The driver may need to be installed for the first time, after the driver installed successfully, sets “headphones CSR8645” as default playback device (Refer to Computer OS instruction). 3. Turn on the music player on your computer, and then you enjoy music of computer via your headphone. (Microphone is disabled in this mode)

• Charging Your new headphone has enough power to pair and make a few calls. When battery is low, you will hear the warning tone. It takes 2.5 hours to fully charge the headphone. While charging, the battery indicator light is red, the indicator light flashes blue once charging is complete. Note: The lifetime of the battery will be significantly reduced if your headphone is le

• CANNICE Headblue 1, Clear paired list Turn off the headphone, press and hold the multifunction button and EQ button simultaneously, then connect the headphone to a USB charger or USB port of computer, LED indicator flashes red, release multifunction button and EQ button after 4 seconds, paired list is cleared. Hardware reset Turn on the headphone, press and hold the multifunction button, connect the headphone to a USB charger or USB port of computer, the LED indicator flashes red, hardware reset is done in about 2 seconds.

Related Products and Documents (Headphone):

Comparable Devices:

Similar Resources:

• TaoTronics TT-BH22 (20 pages) User Guide TaoTronics Active Noise Cancelling Wireless Stereo HeadphonesTT-BH22www.taotronics.comNORTH AMERICAE-mail: [email protected] (US)[email protected](CA)Tel: 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST)Address: 46724 Lakeview Blvd, Fremont, CA 94538EUROPEE-mail: [email protected] (UK)[email protected] (DE)supp …

• Jabra MOTION UC (100 pages) GET STARTED IN UNDERNEED MORE HELP?For the latest support info and online User Manuals visit jabra.com/motionucTOLL FREE Customer Contact Details:Phone: E-mail: Austria +49 (0)8031 2651 72 [email protected]/Belgium +49 (0)8031 2651 72 [email protected] Czech Republic +420 800 522 722 [email protected] Denma …

• Motorola PMLN6757 (34 pages) ADJUSTABLE D-STYLEEARPIECEWITH PUSH-TO-TALK (PTT)AND MICROPHONEPMLN6757en-USit-ITde-DEnl-NLpt-PT ru-RUes-ESfr-FRMN000356A01_aa.book Page 1 Monday, December 21, 2020 4:35 PM …

• TAGG Inferno 2.0 (2 pages) TAGG--INFERNO 2.0--USER’S MANUALFUNCTION OPERATIONPower On Long Press the HOME for 3 secsPower OffLong Press the HOME for 3 secsIn Pairing ModeBlue and Red LED will start BlinkingBlue LED will BlinkShort Press the HOME ButtonShort Press the HOME ButtonLong Press the Volume “ +” & “-”Press the “+” & “-” ButtonPress the “+” & …

• Bowers & Wilkins C5 Series 2 (6 pages) C5 Series 2 In-Ear HeadphonesENGLISHContentsENGLISH 11. C5 Series 2 carton contents 32. Fitting your C5 Series 2 in-ear headphones 32.1 Selecting headphone tips 32.2 Adjusting the cable loops 32.3 Removing the cable loops 33. Using your C5 Series 2 in-ear headphones 44. Cleaning your C5 Series 2 in-ear headphones 45. Trouble shooting 46. Safety warning …

• Sony DRBT160AS - Bluetooth Stereo Headset (1 pages) Sony Electronics Inc. • 16530 Via Esprillo • San Diego, CA 92127 • 1.800.222.7669 • www.sony.com DR-BT160ASWireless Stereo Headset Specifications1. Interoperability and compatibility among Bluetooth® devices varies.2. Actual battery life and charging times will vary based on product settings, usage patterns, battery and environmental conditions …

Comments, Questions and Opinions: