Samsung SCD-5083R Operation & User’s Manual
|
Samsung SCD-5083R, 26_ camera operation camera operation - FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue) - LANGUAGE : You can select the menu language according to your requirements. - RETURN : Return to the SPECIAL menu. y COMM ADJ (Communication Adjustment) : - COAX : You can select whether to use COAX communication. - RETURN : Return to the SPECIAL menu. y IMAGE ADJ ❶ MM If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘IMAGE ADJ’. ❷ MM Select a desired mode using the Function Setup switch. - GAMMA : The setting range is 0.2 ~ 1.0. The closer to 1.0 the sett
8_ contents contents INTRODUCTION 9 9 Features 10 Components and Accessories 11 Component names and functions INSTALLATION 12 12 Before installation 12 Installation 14 Adjusting the monitoring direction for the camera CONNECTION 15 15 Connecting to Monitor 15 Connecting to Power 16 Using Coaxial Communications CAMERA OPERATION 18 18 Menu Configurat
Samsung SCD-5083R, 22_ camera operation camera operation EXPOSURE 1. When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup switch so that the arrow indicates ‘EXPOSURE’. 2. Select a desired mode using the Function Setup switch. y BRIGHTNESS : Adjusts the video brightness. y LENS : Using this function, you can control the screen brightness. - DC : Select Auto Iris Lens. y IRIS SPEED (DC) : Adjusts the Iris control speed of the DC lens. If the control speed is too slow or fast, please
Samsung SCD-5083R, specifications 36_ specifications SCD-5083RN SCD-5083RP Contrast Enhancement SSDR ( Off / On ) Digital Noise Reduction SSNR 4 ( Off / On ) Defog AUTO / MANUAL / OFF Purple Fringe Reduction Purple Fringe Reduction ( Off / Low / Middle / High) Digital Image Stabilization Off / On Tampering Off / On Motion Detection Off / On Intelligent Video Fence, Apear_Disappear, Counting ( Off / On ) Privacy Masking Off / On (24 programmable zones with 4points polygonal masking) Gain Control Off / Low / Middle / High White Balanc
Samsung SCD-5083R, 32_ camera operation camera operation y INDICATOR : Outlines an object on the screen in a box when its movement matches a custom Motion Type. M ` In the following cases, the appear/indicator may malfunction. - When multiple movements occur randomly - When a fixed object keeps moving in the same location - When a new object covers an object with changes y ALARM OUT : When object movement is detected, the detection signal will be outputted. ` EXTERNAL : Send signals through external terminals.
Samsung SCD-5083R, English_29 ● Camera OperatiOn - TAMPERING : If the screen view is obstructed or the camera location is changed, tampering detection, you can issue an event signal by setting it. y SENSITIVITY : Set the sensitivity to tampering detection. y ALARM OUT : Outputting of detection signals can be set. ` EXTERNAL : Send signals through external terminals. ` OSD : Display signals on the screen. ` RETURN : Return to the TAMPERING menu. y RETURN : Return to the VIDEO ANALYTICS menu. M ` In the following cases, the initially set tamp
Installation 14_ Installation ADJUSTING THE MONITORING DIRECTION FOR THE CAMERA ` Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation.
Samsung SCD-5083R, English_27 ● Camera OperatiOn y DAY/NIGHT : You can display pictures in color or in black and white. ❶ If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘DAY/NIGHT’. ❷ Select a desired mode using the Function Setup switch according to the picture display you want. - AUTO : The mode is switched to ’Color‘ in a normal environment, but switches to ’B/W‘ mode when ambient illumination is low. To set up the switching time for AUTO mode, press the Function Setup switch. You can turn on or off the b
Samsung SCD-5083R, Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description. ■ SCD-5083R SERIES • NTSC MODEL • PAL MODEL SCD-5083RN SCD-5083RP ■ MODEL DESCRIPTION • SCD-5083RX _ •SIGNAL SYSTEM N → NTSC MODEL P → PAL MODEL SIGNAL SYSTEM
Samsung SCD-5083R, 24_ camera operation camera operation y WDR : When there are both bright and dark areas at the same time, this mode makes both areas distinctive. - LEVEL : Select one from low, med, high to adjust the brightness of the WDR setup. <WDR ON> <WDR OFF> - RETURN : Return to the MAIN SETUP menu. M ` In WDR mode, the max/min shutter value is set to 1/2 to 1/480. ` In WDR mode, there can be noise between a bright and dark area. ` Depending on light conditions, unnatural changes or symptoms can occur on the screen so deactivate the user mode. WDR SETUP ▶ 1.
30_ camera operation camera operation ` MODE : Determine whether to use the selected area. ` SENSITIVITY : Set the sensitivity of the motion detection. When you adjust the higher level, the more sensitive. ` TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted. ` RETURN : Return to the MOTION DET menu. y NON DET. AREA : Specify a detection exception area to mask.Select a mask area
Samsung SCD-5083R, English_33 ● Camera OperatiOn - Severe snow, rain and wind. Sunset or sunrise - If the size is greater than the max size or smaller than the min size, motion is not detected. To avoid false detection caused by noises, set the max/min detection size suitable for the installation environment. But the same movement in the same location can cause a different detection size. So, include margins when you set the min/max detection size. EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. y SAVE : Save the current settings and exit the MAIN SETUP menu. y NOT SAVE : Do not save t
Samsung SCD-5083R, English_19 ● Camera OperatiOn 1. Press the Function Setup switch. y Main SETUP menu is displayed on the monitor screen. 2. Select a desired function using the Function Setup switch. y Place the cursor over a desired item. 3. Set up a selected item by using the Function Setup switch. 4. To finish the setting, select ‘EXIT’ and press the Function Setup switch. M ` An item with the icon also has sub menus. To select a sub menu, select an item with the icon and press the Function Setup switch. ` An item with the --- icon is unavailable due
Samsung SCD-5083R, English_35 ● specifications SPECIFICATIONS SCD-5083RN SCD-5083RP Video Imaging Device 1/3” 1.3M CMOS Total Pixels 1312(H) x 1069(V) Effective Pixels 1305(H) x 1049(V) Scanning System Progressive Scan Synchronization Internal Frequency H : 15.734KHz / V : 59.94Hz H : 15.625KHz / V : 50Hz Horizontal Resolution Color : 1000 TVL B/W : 1000 TVL Min. Illumination Color : 0.05Lux (F1.4, 50IRE), 0.001Lux (1sec, F1.4, 50IRE) 0.02Lux (F1.4, 30IRE), 0.0006Lux (1sec, F1.4, 30IRE) B/W : 0Lux (IR LED On) S / N Ratio 52dB (AGC off, Weight on) Video Output CVBS : 1.0 Vp-p / 7
www.samsungtechwin.com www.samsungsecurity.com SAMSUNG TECHWIN CO., LTD. Samsung Techwin R&D Center, 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, Korea TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN EUROPE LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS TEL : +44-1932-45
Samsung SCD-5083R, Super High Resolution WDR Dome Camera User Manual Copyright ©2014 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization o
Samsung SCD-5083R, English_13 ● InstallatIon Installation 1. Attach the installation template to the selected area and punch 2 holes as shown in the figure. 2. Use the 2 supplied screws to fix the camera to the 2 punched holes. ` Set the <TOP FRONT> mark imprinted on the camera to face the direction of camera monitoring. 3. Adjust the lens in a desired direction by referring to the “Adjusting the monitoring direction for the camera” section. 4. Attach the dome cover and the shield case to the main body. M ` Pay attention to the direction for assembly. 케이블 구멍 TOP FRONT
Samsung SCD-5083R, 34_ troubleshooting troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. y Check that the power cord and line connection between the camera and monitor are properly connected. y Check that you have properly connected BNC cable to the camera. y Check the type of lens. The image on the screen is dim. y Is lens stained with d
Samsung SCD-5083R, 18_ camera operation MENU CONFIGURATION MAIN SETUP PROFILE ● BASIC ● DAY/NIGHT ● BACKLIGHT ● ITS ● INDOOR ● USER SSDR ● ON ● OFF WHITE BAL ● ATW ● OUTDOOR ● INDOOR ● MANUAL ● AWC SET ● MERCURY EXPOSURE ● BRIGHTNESS ● LENS ● SHUTTER ● AGC ● SSNR4 ● RETURN BACKLIGHT ● OFF ● USER BLC ● HLC ● WDR SPECIAL ● DISPLAY ● COMM ADJ ● IMAGE ADJ ● DAY/NIGHT ● DEFOG ● PRIVACY ● DIS ● VIDEO ANALYTICS ● RETURN EXIT ● SAVE ● NOT SAVE ● RESET MENU
Samsung SCD-5083R, English_11 ● INTRODUCTION COMPONENT NAMES AND FUNCTIONS ➊ Dome Cover 2 Shield Case ➌ Rotate base : control rotating angle of camera. ➍ Vari-focal Lens Module : 3 ~ 10.0mm (F1.4). ➎ Function Setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item. ➏ Video Output Terminal ➐ Pan Base : Control panning angle of camera. ➑ Power Input Connector ➒ Ground Terminal ❿ D & N Input Te
Samsung SCD-5083R, connection 16_ connection When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm 2 ) #22 (0.33mm 2 ) #20 (0.52mm 2 ) #18 (0.83mm 2 ) Resistance value(Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 y As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera. ※ Standard voltage for camera operation : DC 12V±10%, AC 24V±10% ※ There may be some deviation in voltage dr
Samsung SRD-1650DC Security Camera Specfications
SRD-1650DC |
Samsung SCP-3120 Security Camera Specifications
SCP-3120 |
Samsung SCC-C7453N Security Camera Operation & user’s manual
SCC-C7453N |
Samsung 171T Security Camera Manual del usuario
171T |
Samsung SCP-2273 Security Camera Specifications
SCP-2273 |
Samsung SNH-1011N Security Camera Operation & user’s manual
SNH-1011N |
Samsung SRD-830 Security Camera Operation & user’s manual
SRD-830 |
Samsung SRD-1650DC Security Camera Specifications
SRD-1650DC |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | LG | G1500 | Operation & user’s manual | lg/g1500-ZEY.pdf | 10 May 2023 | 81 | |
2 | Black & Decker | DV7210ECN | Original instructions manual | black-decker/dv7210ecn-411.pdf | 10 Feb 2023 | 80 | |
3 | FEISHEN | FAAT6000 | Owner's manual | feishen/faat6000-8XC.pdf | 03 Oct 2022 | 116 | |
4 | Gaggenau | VL 430-707 | Operating and assembly instructions manual | gaggenau/vl-430-707-C9S.pdf | 16 Aug 2023 | 16 | 0.28 Mb |
5 | Monte Carlo Fan Company | 3MNLR56 | Owner's manual and installation manual | monte-carlo-fan-company/3mnlr56-JGT.pdf | 31 Aug 2022 | 10 | |
6 | TRENDnet | TEW-AO08O | Specifications | trendnet/tew-ao08o-K4C.pdf | 19 Dec 2023 | 2 | 0.32 Mb |
SIBELL
3 Megapixel Network Camera User Manual Please read this manual carefully before use of the products and preserve for reference purposes. Specifications are subject to change without notice*
…
SB3IREV(39 pages) |
COP Security
1 Installation and Operation Manual for Speed Dome Camera 15-CD53/53W VER:1.1 Please read the operation manual carefully before installing and using this unit
…
15-CD53(30 pages) |
Konig
SAS-DUMMYCAM80MANUAL (p. 2)ANLEITUNG (S. 4)MODE D’EMPLOI (p. 6)GEBRUIKSAANWIJZING (p. 8)MANUALE (p. 10)MANUAL DE USO (p. 12)MANUAL (p. 14)HASZNÁLATI ÚTMUTATÓ (o. 16)KÄYTTÖOHJE (s. 18)BRUKSANVISNING (s. 20)NÁVOD K POUŽITÍ (s. 22)MANUAL DE UTILIZARE (p. 24)ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 26)BRUGERVEJLEDNING (s. 28)VEILEDNING (s. 30)ИНСТР� …
SAS-DUMMYCAM80(51 pages) |
Samsung
34 / 35SAMSUNG VIDEO SECURITY SYSTEM I CAMERASSCC-B9374Anti-Vandal Dome IR LedsDay & Night Camera|Dimensions (unit:mm)• 1/3" 410K/470K pixels Super-HAD CCD• 540(Color)/570(BW) TV lines resolution• Minimum scene illumination : 0 Lux with IR-LED(18pcs)• Vari-focal(3.8~9.5mm) auto iris lens built-in F1.2• Color & B/W changing time selec …
SCC-B9374(1 pages) |
switel
Smart iCAMRemote HD Wi-Fi DIY Surveillance CameraPlease read carefully before using this equipment.ENGLISHFRANÇAISESPAÑOLDEUTSCHITALIANO User's ManualManuel de l'utilisateurManual del UsuarioBedienungsanleitungManuale d'uso 200
…
BSW 200(90 pages) |
Samsung
English-1EnglishTV CameraVG-STC4000User’s GuideProduct Overview If you connect with Samsung TV, it can be used various apps such as voice/video calls, motion control, camera and Fitness. The Skype™ app, which is available in Smart Hub, and lets you make or receive a voice or video call, can be used only with the Samsung TV camera. Samsung TV mod …
VG-STC4000(83 pages) |
innovair Air Conditioner -ASL-JEC 18 SEERinnovair -ASL-JEC 18 SEER Manual (Installation instructions manual), @7T6G49 -ASL-JEC 18 SEER, 56 |
SMC Networks Switch 6824MPE INT - FICHE TECHNIQUESMC Networks 6824MPE INT - FICHE TECHNIQUE Switch Management manual 6824MPE INT - FICHE TECHNIQUE, 570 |
Vizio Flat Panel TV M190MVVizio M190MV User Manual (Doc Type: Flat Panel TV Operation & user’s manual) M190MV, 51 |
Sapling Clock SBL 3000 Series#63SZRY: SBL 3000 Series Clock Installation and programming manual SBL 3000 Series, 43 |
Gateway Computer Hardware ALR 9200Gateway ALR 9200 Computer Hardware Maintaining and troubleshooting ALR 9200, 226 |
Custom Audio Electronics Printer NeoCustom Audio Electronics Neo Printer Operation & user’s manual Neo, 32 |
Leica Laboratory Equipment RM2255Leica RM2255 Guide (Doc Type: Laboratory Equipment Instruction manual) RM2255, 74 |
hi-Fun Speakers hi-Call#ZA7782: hi-Call Speakers Operation & user’s manual hi-Call, 28 |
TRENDnet Wireless Router TEW-714TRUTRENDnet TEW-714TRU Guide (Datasheet), @S9FXC8 TEW-714TRU, 3 |
Maytag Refrigerator Refrigerator FreezerManual: Maytag Refrigerator Freezer (7V3LE9, Upd.25/10/2023) Refrigerator Freezer, 17 |
YASKAWA Controller DX200YASKAWA Product Guide: DX200 PDF Instructions manual - PCV7FA DX200, 11 |
Extreme Networks Network Accessory GBXPDF Guide (@4H144A), Extreme Networks GBX Network Accessory (Saturday 24-02-2024) GBX, 21 |