Siemens CMTC1515 Operation & User’s Manual

Text of Siemens CMTC1515 User Guide:

• Hardware Installation 13 Siemens Building Technologies Fire Safety & Security Products 01.2006 5 Hardware Installation This chapter will guide you through the correct installation procedures for the LCD monitor. 5.1 Scope of Delivery z One LCD monitor mounted on its stand z AC power cord z User manual z PC DVI-A to D-sub 15-pin cable z DC 12V 500mA Output Power Co

• Siemens CMTC1515, 3 Siemens Building Technologies Fire Safety & Security Products 01.2006 Contents 1 Introduction .............................................................................................5 2 Work Safety Information ........................................................................6 2.1 Product Safety Precautions ......................................................................6 2.2 Safety Guidelines................................................................................

• Siemens CMTC1515, Connection and Buttons 16 Siemens Building Technologies Fire Safety & Security Products 01.2006 B Composite (AV) audio input and output R is for the right channel (red) of the audio connector, L is for the left channel (white) of the audio connector. IN is for the AV audio input. Connect the audio connector from the AV equipment to the monitor. OUT is for the AV audio output. Connect the audio connector from the monitor to the input connector of another AV equipment. There are some connection methods for stereo/mono and input/output applications. Please ref

• Siemens CMTC1515, Adjusting the OSD Screen (AV Equipment) 26 Siemens Building Technologies Fire Safety & Security Products 01.2006 9.8 Enabling/Disabling Inputs Open the OSD main menu and select the option SOURCE, see chapter 8.1: OSD Main Menu. This feature allows the user to turn off the inputs to the monitor that are not connected and quickly select the desired input source. Disabling the unused inputs permits the user to bypass the disabled input sources and only choose from the enabled inputs by pressing the Source/Enter button. SOURCE AV1 Enable Disable AV2 Enable Disable SV Enable Disable DVI Enable Disable PC Enable Disable For example: with AV1 set to Enabl

• Siemens CMTC1515, Standards and Guidelines 9 Siemens Building Technologies Fire Safety & Security Products 01.2006 3 Standards and Guidelines 3.1 FCC Requirements This device complies with Part 15 of the FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must tolerate any interference encountered, including interference that may cause improper operation. The equipment has been tested and found to comply with the requirements stipulated in Part 15 of FCC regulations for a Class B digital device. These requirements are designed

• Siemens CMTC1515, Adjusting the OSD Screen (DVI and PC) 20 Siemens Building Technologies Fire Safety & Security Products 01.2006 8.3 Configuration of the Phase, Clock, Positioning of Image NOTE This option does not support DVI source. Open the OSD main menu and select the option AUTO ADJUST, see chapter 8.1: OSD Main Menu. This is used for automatic configuration of the phase, clock, vertical and horizontal positioning of image. 8.4 Adjusting Color Open the OSD main menu and select the option COLOR ADJUST, see chapter 8.1: OSD Main Menu. The opti

• Adjusting the OSD Screen (AV Equipment) 23 Siemens Building Technologies Fire Safety & Security Products 01.2006 9 Adjusting the OSD Screen (AV Equipment) 9.1 OSD Main Menu The OSD main menu is composed of text and graphics. 1. Press the Menu/Exit button Î For adjusting the OSD screen the following options are available: Fig. 2 O

• Siemens CMTC1515, Technical Data 12 Siemens Building Technologies Fire Safety & Security Products 01.2006 4 Technical Data Model No. CMTC1515 CMTC1715 CMTC1915 LCD panel type 15.0" TFT LCD 17.0” TFT LCD 19.0” TFT LCD Pixel dimension (HxV) 0.297 x 0.297 mm 0.264 x 0.264 mm 0.294 x 0.294 mm Resolution (Max.) XGA 1024 x 768 SXGA 1280 x 1024 SXGA 1280 x 1024 LCD display color 16.7 M colors 16.7 M colors 16.7 M colors Frequency Range of analog input H Sync: V Sync: 31.5 – 60 kHz 50.0 – 75.0 Hz 31.5 – 80 kHz 50.0

• Siemens CMTC1515, Connection and Buttons 15 Siemens Building Technologies Fire Safety & Security Products 01.2006 6 Connection and Buttons 6.1 Connection CMTC1515 / CMTC1715 A B C D E CMTC1915 F G A B C D E A Composite (AV) video input and output There are two sets of AV video inputs and outputs that can be used. This monitor also supports the “auto looping” function, permitting the connection of another monitor from the output connectors. 1 is for the AV 1 video connector, 2 i

• Siemens CMTC1515, Adjusting the OSD Screen (DVI and PC) 21 Siemens Building Technologies Fire Safety & Security Products 01.2006 8.6 Adjusting PIP (Picture In Picture) Setting The main image source of the PIP function is the DVI or PC. Open the OSD main menu and select the option PIP SETTING, see chapter 8.1: OSD Main Menu. The option PIP SETTING contains a submenu of options for adjusting the PIP setting. The submenu includes five options: z PIP This option is used to enable or disable PIP function. z PIP source This option is used to select the source signal between AV

• Adjusting the OSD Screen (DVI and PC) 22 Siemens Building Technologies Fire Safety & Security Products 01.2006 8.8 Open the Information Open the OSD main menu and select the option INFORMATION, see chapter 8.1: OSD Main Menu. The INFORMATION menu provides the user with detailed information regarding the version, resolution, H-FREQ and V-FREQ. 8.9 Enabling/Disabling Inpu

• Siemens CMTC1515, Work Safety Information 6 Siemens Building Technologies Fire Safety & Security Products 01.2006 2 Work Safety Information Caution and Warning CAUTION !! RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No internal parts can be serviced by users. Refer servicing to qualified personnel WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS MONITOR TO RAIN OR MOISTURE. “HIGH VOLTAGE EXISTS ON THE BACK LIGHT POWER LEAD OF THIS MONITOR. BEFORE SERVICING, DETERMINE THE PRESENCE OF HIGH VOLTAGE BY CONNECTI

• Siemens CMTC1515, Standards and Guidelines 11 Siemens Building Technologies Fire Safety & Security Products 01.2006 3.5 EMC-Declaration of Conformity For the equipment: 15/17/19 inch CCTV color monitor Model designation/Trade name: CMTC1515/CMTC1715/CMTC1915 it is herewith confirmed that this equipment complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive (89/336/EEC, amended by 92/31/EEC). For the evaluation regarding the Electromagnetic Compatibility (89/336/EEC, ame

• Siemens CMTC1515, Liefermöglichkeiten und technische Änderungen vorbehalten. Data and design subject to change without notice. / Supply subject to availability. © 2006 Copyright by Siemens Building Technologies AG Wir behalten uns alle Rechte an diesem Dokument und an dem in ihm dargestellten Gegenstand vor. Der Empfänger erkennt diese Rechte an und wird dieses Dokument nicht ohne unsere vorgängige schriftliche Ermächtigung ganz oder teilweise Dritten zugänglich machen oder außerhalb des Zweckes verwenden, zu dem es ihm übergeben worden ist. We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipie

• Adjusting the OSD Screen (AV Equipment) 25 Siemens Building Technologies Fire Safety & Security Products 01.2006 9.6 Adjusting the VOV (Video On Video) Setting Open the OSD main menu and select the option VOV SETTING, see chapter 9.1: OSD Main Menu. The option VOV SETTING in the main menu contains a submenu of options for adjusting the

• Siemens CMTC1515, 4 Siemens Building Technologies Fire Safety & Security Products 01.2006 10 Troubleshooting Tips ...........................................................................27 11 Disposal .................................................................................................28 12 Keyword index.......................................................................................29

• Siemens CMTC1515, Introduction 5 Siemens Building Technologies Fire Safety & Security Products 01.2006 1 Introduction Welcome to a fantastic new technology which will completely change the way you view monitors. The following sections describe just a few of the major advantages of this LCD monitor. You’ll discover more of its wonderful features as you use it. 1. Low radiation and reduced flickering compared to the traditional CRT monitors minimize hazards to your health. 2. Its compact size requires only minimal desktop space. This makes transportation easier and, combined with the aforementioned properties, facilitates use in nearly any

• Hardware Installation 14 Siemens Building Technologies Fire Safety & Security Products 01.2006 5.3 LCD Monitor Installation 1. Unpack your LCD monitor. 1. Make sure the following items are included in the box and are in good condition. See chapter 5.1: Scope of Delivery. If you find that any of these items are damaged or missing, please contact your dealer i

• Siemens CMTC1515, Work Safety Information 7 Siemens Building Technologies Fire Safety & Security Products 01.2006 – The product does not operate normally when the operating instructions are followed. – The product has been dropped or the cabinet has been damaged. – The product exhibits a distinct change in performance, indicating a need for service. – The power cord or plug is frayed or damaged. 2.2 Safety Guidelines WARNING This device must be operated with the original power supply, part number: HJC, HASU12FB60. CAUTION

• Siemens CMTC1515, Troubleshooting Tips 27 Siemens Building Technologies Fire Safety & Security Products 01.2006 10 Troubleshooting Tips In the event that you experience trouble with your monitor, check the following items before contacting the dealer from whom the monitor was purchased. The most common problems usually involve an incorrect connection from the video card or AV equipment to the monitor. We recommend that you also consult your user manuals for your video card or AV equipment during the troubleshooting procedure. Do not exceed the maximum refresh rate recommended for the monitor. Problem Troubleshooting Tip No image on display screen 1. Check

• Siemens CMTC1515, Herausgegeben von Siemens Building Technologies Fire & Security Products GmbH & Co. oHG D-76181 Karlsruhe www.sbt.siemens.com © 2006 Copyright by Siemens Building Technologies AG Liefermöglichkeiten und technische Änderungen vorbehalten. Dokument Nr. A24205-A336-S510 Ausgabe 01.2006

• Siemens CMTC1515, Connection and Buttons 17 Siemens Building Technologies Fire Safety & Security Products 01.2006 6.2 Buttons 1 2 3 4 5 6 7 1 R.C. Receiver: (CMTC1915 only) This lens is the remote control receiver window, do not block this window when using the remote control. 2 Menu/Exit Enters the OSD adjustment main menu. This button is also used to return to the previous menu or submenu. This button is also used to exit the OSD main menu when the main menu is displayed on the screen. 3 Source/Enter This button is used to select the input source when the OSD is off. The input changes must be

• Siemens CMTC1515, Keyword index 29 Siemens Building Technologies Fire Safety & Security Products 07.2004 12 Keyword index A Adjusting Brightness, Contrast, Volume 19, 23 Color 20, 24 Options for OSD Setup 21, 25 Phase, Clock, Positioning of Image 20 Screen Position 20 Video Quality 20 D Disposal 28 E Exit the OSD Main Menu 22, 26 I Information 22 R Reset to Default Setting 22, 26 S Standards 9 T Troubleshooting Tips 27

• Siemens CMTC1515, The Display Timing of PC Mode 18 Siemens Building Technologies Fire Safety & Security Products 01.2006 7 The Display Timing of PC Mode Applicable video timing for PC- analog video The following table lists the better display quality modes for analog signal (PC) supported by this LCD monitor. If other video modes are input, the monitor will stop working or display unsatisfactory picture quality. VESA MODES Horizontal Vertical Mode Resolution Total Nominal Frequency

• Siemens CMTC1515, Adjusting the OSD Screen (DVI and PC) 19 Siemens Building Technologies Fire Safety & Security Products 01.2006 8 Adjusting the OSD Screen (DVI and PC) 8.1 OSD Main Menu The OSD main menu is composed of text and graphics. 1. Press the Menu/Exit button Î For adjusting the OSD screen the following options are available: Fig. 1 Options of the OSD main menu 2. Select the desired option by using the two ▲/+,▼/- buttons. Î The selected option is highlighted in blue. 3. Press the Source/Enter button to enter the submenu for adjusting items. 4. Change the value you wish to adjust by using the ADJUST ▲/+,▼/- buttons 5. Press

• Siemens CMTC1515, Standards and Guidelines 10 Siemens Building Technologies Fire Safety & Security Products 01.2006 3.2 Compliance Information for the U.S.A. The equipment has been tested and found to comply with the requirements for a Class B digital device, pursuant to part 15 of the FCC Rules. These requirements are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance

• Siemens CMTC1515, Disposal 28 Siemens Building Technologies Fire Safety & Security Products 01.2006 11 Disposal All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. This crossed-out wheeled bin symbol on the product means the product is covered by the European Directive 2002/96/EC. The correct disposal and separate collection of your old appliance will help prevent potential negative consequences for the environment and human

More Instructions:

Siemens CMTC1515 Operation & user’s manual 15-11-2022 26

DOWNLOAD

Related Products and Documents (TV):

Comparable Devices:

Similar Resources:

• Magnavox 32MD359B - 32" LCD TV (3 pages) 32MD359B32" class LCD HDTV with Built-in DVD playerWith a built-in capable DVD player, integrated digital tuner, the 32MD359B enriches the total viewing experience with ultra sharp widescreen HD picture, HD media connectivity, Dolby Digital sound and SPDIF audio output.•Built-in DVD player maximizes viewing experience•High-definition LCD WXGA displa …

• Sharp LC-48CFG6001K (1 pages) 2. Using the RF cable supplied, connect the TV to the TV Aerial wall socket. Connect the power cable to the electrical outlet.3. Switch on the television using the standby button located on the side/underside of the TV set.4. Insert the batteries supplied into the remote control. When the TV is in standby mode, press the standby button to power on the TV. …

• Philips 32PFL4609 (2 pages) FORMATAdjusts the Picture Size on the TV screen.ES Ajusta el tamaño de imagen en la pantalla de televisión.FR Règle la taille de l’image sur l’écran du téléviseur. (MENU button ES boton de MENU FR bouton de MENU)Opens the Main On-screen Menu.ES Abre el menú principal en pantalla.FR Ouvre le menu principal à l’écran.Watch TVBrowse USB Browse …

• Panasonic CT-20S11 (28 pages) Panasonic Color TelevisionOperating InstructionsRead these instructions completely before operating this set.Contents subject to change without notice or obligation.Printed in U.S.A.© MatsushitaElectricIndustrialCo.Ltd..All rights reserved.Unauthorizedcopyinganddistributionisa vioiationoflawTQB2A0772 …

• Dell W2600 (49 pages) centercenterPRINTER: Adjust the spine width according to the number of pages in the book. Then strip into the center of the book.spinePMS 300 PLATEBLACK PLATEPrinted in ChinaImpreso en ChinaImprimé en ChineDell W2600 26” LCD TV Owner’s Manualwww.dell.com | support.dell.comTMTelevisor LCD Dell™W2600 de 26 pulgadasTV LCD Dell™W2600 66 cmDell™W2600 2 …

• Samsung CL34M9P8X/RCL (53 pages) COLOR TELEVISION RECEIVERChassis : KS3A(N)Model : CL34M9P8X/RCLCOLOR TELEVISION RECEIVER CONTENTSPrecautionsReference Information Specifications Alignment and AdjustmentsTroubleshootingExploded Views and Parts ListElectrical Parts ListBlock Diagrams Wiring DiagramSchematic Diagrams1.2.3.4.5.6.7.8.9.10. …

Comments, Questions and Opinions: