Manualios.com

Accton Technology EN2218-1 Operation & User’s Manual

Accton Technology EN2218-1 Manual Online:

4.5, 1247 votes
Accton Technology EN2218-1 User Manual
Accton Technology EN2218-1 User Guide
Accton Technology EN2218-1 Online Manual

Text of Accton Technology EN2218-1 User Guide:

  • Accton Technology EN2218-1, Introdution 1-1 Chapter 1 Introduction The Ethernet/Modem PC Card is a recent development in PCMCIA card technology. This card can manage the PC Ethernet interface and Data/Fax/ Modem connections simultaneously. It can be installed and configured by running the Card and Socket Services Support (CS/SS) software provided with your computer, or by invoking the Client Driver Program provided with the PC Card. However, note that because of the lack of broadly accepted standards for CS/SS soft

  • Accton Technology EN2218-1, Modem ATCommands and S-Registers B-1 Appendix B Modem AT Commands and S-Registers The AT command set allows you to control your modem from a command line or from terminal mode. Some guidelines for using the AT command set are listed in the following tables. • AT commands are usually preceded by AT. They are not case sensitive and do not require spaces in the command strings themselves. • AT commands can be invoked from any modem communications software under terminal mode. • AT commands invoked normally get a response of OK, ERROR or other messages, depending

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide E-4 Product Support Services Limited Five Year Warranty Limited Warranty Accton warrants to the original owner that the product delivered in this package will be free from defects in material and workmanship for the five (5) years following the latter of: (a) the date of purchase only if you register by returning the registration card as indicated thereon with proof of purchase; or (b) the date of manufacture. This warranty does not cover the product if it is damaged in the proc

  • Accton Technology EN2218-1, Index 1 Index Symbols 1Step 1-1 , 2-3 , 3-1 , A-1 Overview 3-2 Screen 3-1 Using 3-1 68-pin PC Card connector 2-1 A ACC2218.EXE 2-8 Action Menu A-1 Opening 3-8 B bps 4-1 Bulletin Board Service (BBS) E-2 Bus-Width C-1 C Card and Socket Services 1-1 Card and Socket Services Software A-3 Card and Socket Services Support 2-3 Card Diagnostics 2-3 Card Information System 2-5 CIS 2-5 Client driver 2-5 , 2-9 , 2-11 COM Ports 4-1 command line B-1 Communications Software B-1 CONF

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide Modem AT Commands and S-Registers B-5 Table B.1 AT Command Summary (cont.) Command Description Usage Default AT&W Write to Stored Profile 0 Write a command to the modem’s memory (stored profile 0). Usually added to the end of a string of AT commands˝example: ATL3&W causes L# to be written to stored profile 0. N AT&W1 Write to Stored Profile 1 Write a command to stored profile 1 N AT%E0 Disable line monitor/auto retrain Disable line quality monitor and auto retrain N AT%E1 Enable line monitor/auto retrain Enable line quality monitor and

  • Ethernet+Modem/Fax PC Card User’s Guide A-2 Troubleshooting Symptoms 1. Twisted-pair connection results in card failure. 2. Running Test Adapter results to External Loopback Test failure. Possible Cause Invalid twisted-pair link Suggestions 1. Check the RJ-45 connection for loose cabling. 2. Check for wrong RJ-45 pin assignments. Symptom Ethernet PC Card failure; suddenl

  • Ethernet+Fax/Modem PC Card User’s Guide Regulatory Standards Conformance D-3 The REN is used to determine the quantity of devices that may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.

  • Accton Technology EN2218-1, Installation 2-1 Chapter 2 Installation This chapter describes your PC Card and shows you how to install it. To install the Fax Utility, see instructions that come with the software. Pre-Installation Considerations When preparing to install your PC Card, make sure you have the required hardware and software in place. Installation procedures vary for different PCMCIA-compliant computers. During installation, the power to your PC may be ON or OFF. Caution : The Y-cable is designed to work only with analog telephone systems. It cannot be used on digital phone lines. Both t

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide 2-4 Installation Software Installation Advisory 1. For those who intend to install Card and Socket Service Support drivers, reserve at least 64 KB of memory to provide enough resources for other PC Cards. Example: DEVICE=EMM386.EXE NOEMS X=D000-DFFF 2. For those who installed Card and Socket Services Support device drivers in your config.sys, use Super Client drivers to enable the PC Card’s Fax/Modem function. When the PC Card is inserted into the slot, the Super Client wi

  • Ethernet+Modem/Fax PC Card User’s Guide 3-8 Using 1Step Table 3.1 File Menu Commands File Menu Commands Action DOS Shell Opens a DOS shell within 1Step Exit Exits 1Step and returns to DOS The *.1st file contains the card’s software configuration for the network environment. You can create different card configuration files and save

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide Installation 2-3 Installing the Software Running Card Diagnostics When hardware installation is complete, run diagnostics to check the card and the network cabling with the 1Step program. 1Step is in the root directory of the driver diskette that comes with the package. Run diagnostics by selecting the Test Adapter command from the Action Menu. For more information, see Chapter 3 on Using 1Step. Card and Socket Services Support Portable PCs with one or more PCMCIA slots normally have a PCMCIA socket controller chip built-in. The socket cont

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide 2-10 Installation 6. Verify the LAN function by using Network Neighborhood to browse the network for any existing server. Note: NetWare Network support is loaded by default when the PC Card is installed. 7. Verify the Modem function by opening up the Dial-Up Networking folder and connecting to a modem site. 8. Use the Windows 95 Fax utility to verify the Fax function: • Go to Fax from the Accessories group under the Programs folder • Click

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide C-2 Specifications Modem Standards Conformance Data : V.34, V.32bis, V.32, V.22bis, V.22A/B, V.23, V.21, Bell 212 A/B, Bell 103 Fax : V.17, V.29, V.27ter, V.21 channel 2, G3 Error Correction : V.42, MNP Data Compression : V.42bis, MNP COM Port Supported : COM2, COM3, COM4 Asynchronous Character Format : up to 10 bits Receive Sensitivity : -9 dbm to -43 dbm Dialing : Tone and Pulse Pulse Dialing Rate : 10 pulses per second Buffer Memory : 32 KB ROM : 128 KB Operating Environment Power Requirements : 150 mA (Typical) & 170 mA (Max.) when both LAN and Modem operate concurrently Temperature : 0°C to

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide Using 1Step 3-7 Selecting Memory Management Options The host PC may be using Memory Management software. There are four selections available, namely, Normal, Use XMSNETx, Use EMSNETx, and DOS5+LOADHIGH. The default setting is Normal. Move your cursor to the field named Options to change the settings, if necessary. Identifying the Driver’s Directory Location Type the directory path in the box labeled Directory to indicate where the NetWare drivers are

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide 4-2 Modem/Fax Setup • Selecting a Mode (Modem Choice) To determine your modem’s model, check the modem equipment itself, and the documentation that comes with it. If the model number does not appear anywhere in these above-mentioned locations or on the software list, use the 14400/28800/33600 Generic Modem Compatibles from the Modem software installation options. • Parity Parity types and values must be the same on both the modems when transmitting and receiving. Not many systems use parity, so it is usually set to NONE when specified in software • Word Length The number of bits in each

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide E-6 Product Support Services Accton Offices Accton Technology Corporation International Headquarters No. 1 Creation Rd. III, Science-based Industrial Park, Hsinchu 300, Taiwan, R.O.C. Hsinchu: Phone: 886-3-5770-270, Fax: 886-3-5770-267, 886-3-5775-541 BBS: 886-3-5770-654 Taipei: Phone: 886-2-577-1220 to 9 Fax: 886-2-577-0816 Accton USA, 1962 Zanker Road, San Jose, CA 95112, USA Phone: 408-452-8900, 408-452-8080 Fax: 408-452-8988 BBS: 408-452-8828 FAST Fax: 408-452-8811 Accton UK, The Mill Horton Road, Stanwell Moor, Staines. Middlx. TW19 6BJ United Kingdom Phone: 44-1753-6

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide 2-6 Installation 2. Invoke the 1Step installation program and choose Install Software from the Action Menu to copy the Client Drivers for Novell into your PC. (Refer to Using 1Step in Chapter 3 for more details.) The following files will be copied into the target directory specified by the user: LSL.COM PCMMLID.COM (DOS ODI Client driver) IPXODI.COM NETX.EXE (VLM.EXE) CHGDRV.COM Check the following items to make sure everything is alright before you go to the next step: • If y

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide A-4 Troubleshooting Modem This section lists some of more common symptoms encountered and possible solutions during modem and software setup. Table A.1 Common Modem Problems and Possible Solutions Symptoms Possible Solutions No sound from modem or speaker − Check if the computer’s speaker is working − Use the ATL2M1&W command in terminal mode ’Error’ message displayed − Check if you specified the correct modem in your software s

  • Accton Technology EN2218-1, Quick Installation Guide iii Quick Installation Guide 1Step is designed to simplify the process of configuring the PC Card to run with NetWare or other network operating systems. To quickly install and configure your card, do the following: 1. Install the PC Card into a Type II PCMCIA slot. 2. Insert the driver diskette that comes with your package into the floppy drive. 3. Run Install to set up network drivers and configure your card. 4. Use the 1Step program to run diagnostics on the adapter card if required. 5. Refer to the Software Installation Advisory section in Chapter 2 if you enco

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide About this Manual ii Back up your driver diskettes and use the copy as the working diskette. Do this to protect the original from accidental damage. @ Fill in the Owner Registration Card and mail it to Accton Technology Corporation.

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide Installation 2-7 5. Test the PC Card’s Modem function by dialing out over the modem. (Refer to Chapter 4 for Modem Setup). Installing under Windows for Workgroups (WFW 3.11) 1. Remove the existing PC Card and replace it with your EN2218 PC Card. 2. Reserve at least 64 KB of memory by including the following statement in your CONFIG.SYS file: Device=EMM386.EXE NOEMS X=D000-DFFF 3. Copy the file ACC2218.EXE from the WFW311 subdirectory of the driver diskette into your Windows for Workgroups directory. A:\WFW311>copy ACC2218.EXE C:\Windows 4. Start up Windows for Workgroups. 5. If you are already using Microsoft Windows Networ

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide B-4 Modem AT Commands and S-Registers Table B.1 AT Command Summary (cont.) Command Description Usage Default AT&C0 Force RLSD active Force RLSD active regardless of the carrier status N AT&C1 Allow RLSD to follow the carrier state Normally used in reset and initialization strings Y AT&D0 Interpret DTR On- to-Off transition per &Qn Prepares the modem for normal data transfer N AT&D1 Interpret DTR On- to-Off transition per &Qn Prepares the modem for normal data transfer N AT&D2 Data Term

  • Ethernet+Modem/Fax PC Card User’s Guide Troubleshooting A-3 Symptom Cannot run mouse while running 1Step. Possible Cause IRQ conflict Suggestions 1. Change the IRQ setting of the Card. 2. Run mouse driver. Symptom Card failure after configuration. Possible Cause 1. Configuration conflict 2. The card is not enabled Suggestions 1. Check I/O and IRQ for possible setting con

  • Fax Operations 5-1 Chapter 5 Fax Operations This chapter describes some of the more common features of Fax software (each of which applies to the Delrina 4-in-1 Fax software). Unless you plan on using the Windows 95 Fax Utility, Fax software needs to be installed before you can transmit or receive a fax. Please refer to the Delrina 4-in-1 User’s Guide for detail

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide Troubleshooting A-5 Table A.1 Common Modem Problems and Possible Solutions(cont.) Symptoms Possible Solutions Modem won’t connect − Make sure the parity, modem speed, word length, and stop bits are all properly set per your software’s specifications − Try removing all the error correction and data compression − If all is well when communicating with any modem except one particular line, there may be a problem with the modem on the other end Modem communication error or mo

  • Accton Technology EN2218-1, Ethernet+Modem/Fax PC Card User’s Guide Using 1Step 3-5 Available Diagnostic Tests You need not start any network operating system to run the following tests: • Configuration Test - Identifies the host PC type • I/O Test - Checks I/O accessibility • ID Test - Verifies if the Card’s ID is correct • RAM Test (or Memory Test) - Checks the condition of on-board RAM • Internal Loopback Test - Checks the adapter’s controller • External Loopback Test - Checks the adapter’s network link • Interrupt Test - Checks interrupt genera

Related Products and Documents (PCI Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Belkin F1DH104L Operation & user’s manual belkin/f1dh104l-B33.pdf 22 Jun 2022 36 2.21 Mb
2 Benchmark DAC1 HDR Instruction manual benchmark/dac1-hdr-N5F.pdf 11 Apr 2023 39
3 CHICAGO 15 PIECE SLIDE HAMMER SET Assembly and operating instructions chicago/15-piece-slide-hammer-set-2J7.pdf 24 Oct 2023 4 0.67 Mb
4 Cub Cadet HB26 Operator's manual cub-cadet/hb26-4ZT.pdf 31 Oct 2022 23 1.4 Mb
5 Smeg LBS645 Manual  smeg/lbs645-9FS.pdf 04 Oct 2022 14 0.59 Mb
6 Rollei RCP-S8 EDITION - Datasheet rollei/rcp-s8-edition-Z4I.pdf 13 Jan 2023 1 0.81 Mb

Similar Resources:

  • YASKAWA

    DX200

    (11 pages)
    MANUAL NO. 0HW1482025Part Number: 166343-1CDRevision: 0DX200 OPTIONSINSTRUCTIONSFOR WELDING CONDITION GUIDE FUNCTIONUpon receipt of the product and prior to initial operation, read these instructions thoroughly and retain for future reference.MOTOMAN INSTRUCTIONSMOTOMAN- INSTRUCTIONSDX200 INSTRUCTIONSDX200 OPERATOR’S MANUALDX200 MAINTENANCE MANUAL …
  • Acorp

    6M810C

    (34 pages)
    The information presented in this publication has been madecarefully for reliability; however, no responsibility is assumedfor inaccuracies. Specifications are subject to change withoutnotice.IBM, PC/AT, and PC/XT are trademarks of International Busi-ness Machines Corporation.Pentium is a trademark of Intel CorporationAWARD is a registered trademark of Award …
  • Edimax

    EW-7608Pg

    (1 pages)
    Taiwan / HeadquartersEdimax Technology Co., LTD.TEL:886-2-7739-6888FAX:886-2-7739-6887 [email protected] Edimax Science & Technology Co., LTD.TEL:8610-6213-9288FAX:[email protected] Technology Europe B.V.TEL:31-499-377344FAX:[email protected] AmericaTEL:1-786-845-8099FAX:1-786-331-8490 sales_latin …
  • TRENDnet

    TEW-501PC

    (2 pages)
    TRENDnet’s TEW-501PC 802.11a/g Wireless PC card is a flexible and affordable wireless solution that allows your mobile workstation to connect to three wireless networks: 802.11a, 802.11g, or 802.11b. The TEW-501PC can operate at a blazing 108Mbps. For wireless security, the TEW-501PC uses WPA-PSK with AES and TKIP encryption algorithms and WE …
  • StarTech.com

    PCI232INTE

    (15 pages)
    Intelligent 3.3 volt/5 volt High SpeedSerial PCI CardPCI232INTEINTEBOX8Instruction GuideThe Professionals’ Source For Hard-to-Find Computer PartsINTELLIGENT SSERIALCARD* Actual product may vary from photo …
  • ADLINK Technology

    PCI-7230

    (56 pages)
    Advance Technologies; Automate the World.Manual Rev. 4.05Revision Date: June 24, 2008Part No: 50-11037-1000PCI-/cPCI-/LPCI-/LPCIe-723X Series32-CH Isolated Digital I/O CardUser’s Manual …

Comments, Questions and Opinions: