Manualios.com

Acer H276HL Operation & User’s Manual

Acer H276HL Manual Online:

3.35, 1897 votes
Acer H276HL User Manual
Acer H276HL User Guide
Acer H276HL Online Manual

Text of Acer H276HL User Guide:

  • Acer H276HL, iii Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the power switch and then turn it on again to make sure the flicker disappears. • You may find slightly uneven brightness on the screen depending on the desktop pattern you use. • blemishes of 0.01% or less such as a missing pixel or a pixel lit all the time. • may remain after switching the image, when the same image is

  • Acer H276HL, EN-2 ATTACHING / REMOVING THE BASE SCREEN POSITION ADJUSTMENT In order to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can be adjusted to 15 degrees up or 5 degrees down as indicated by arrow below. Note: Remove the monitor and monitor base from its packaging. Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen

  • Acer H276HL, EN-16 (VGA Mode) TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the trouble- shooting list below to see if you can self-diagnose the problem. ProblemsCurrent StatusRemedy No Picture LED ON·Using OSD, adjust brightness and contrast to maximum or reset to their default settings. LED OFF·Check the power switch. ·Check if AC power cord is properly connected to the monitor. LED displays ·Check if video signal cable is properly connected at the back of monitor. ·Check i

  • Acer H276HL, EN-10 USER CONTROLS Power Switch / Power LED: To turn the monitor ON or OFF. Lights up to indicate the power is turned ON. Using the Shortcut Menu Press the function button to open the shortcut menu. The shortcut menu lets you quickly select the most commonly accessed settings. Em powering: P ress the Empowering Key to open the Acer eColor Management OSD and access the scenario modes. AUTOAuto Adjust: Press this button to activate the Auto Adjustment function. The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus. MENUOSD functions: Press this botton to activate the OSD menu. Volume Up/Down: Press to adjust v

  • Acer H276HL, TABLE OF CONTENTS UNPACKING............................................................................................ 1 ATTACHING / REMOVING THE BASE..................................................... 2 SCREEN POSITION ADJUSTMENT .......................................................... 2 CONNECTING THE POWER CORD.......................................................... 3 SAFETY PRECAUTION............................................................................. 3 CLEANING YOUR MONITOR .................................................................. 3 POWER SAVING...................................................................................... 4 DDC........

  • Acer America Corporation :HVW6DQ&DUORV6W6XLWH6DQ-RVH CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) t

  • Acer H276HL, EN-6 19-Pin Color Display Signal Cable* * only for certain models PIN Meaning PIN Meaning 1. TMDS Data2+ 10. TMDS Clock+ 2. TMDS Data2 Shield 11. TMDS Clock Shield 3. TMDS Data2- 12. TMDS Clock- 4. TMDS Data1+ 13. CEC 5. TMDS Data1 Shield 14. Reserved (N.C. on device) 6. TMDS Data1- 15. SCL 7. TMDS Data0+ 16. SDA 8. TMDS Data0 Shield 17. DDC/CEC Ground 9. TMDS Data0- 18. +5V Power 19. Hot Plug Detect EN-6 *Only for MHL models *19-Pin Color Display Signal Cable PIN NO. DESCRIPTION 7. MHL+ 9. MHL- 18. VBUS 19. CBUS 5, 11, 17 GND

  • Acer H276HL, EN-7 STANDARD TIMING TABLE Mode Resolution 1 640x480 60 Hz 2 MAC 640x480 66.66 Hz 3 VESA 720x400 70 Hz 4 SVGA 800x600 56 Hz 5 SVGA 800x600 60 Hz 6 XGA 1024x768 60 Hz 7 XGA 1024x768 70 Hz 8 VESA 1152x864 75 Hz 9 SXGA 1280x1024 60 Hz 10 VESA 1280x720 60 Hz 11 WXGA 1280x800 60 Hz 12 WXGA+ 1440x900 60 Hz 13 WSXGA+ 1680x1050 60 Hz 14 UXGA 1920x1080 60 Hz Mode Resolution 1 640x480 @60Hz 2 720x480p @60Hz 3 720x576p @50Hz 4 800x600 @60Hz 5 1024x768 @60Hz 6 1280x720p @60Hz 7 1280x720p @50Hz 8 1920x1080p @30Hz *Only for MHL-Model

  • Acer H276HL, EN-11 Acer eColor Management Operation instructions Step 1: Press “ ” Key to open the Acer eColor Management OSD and access the scenario modes Step 2: Press “W“ or “X” to select the mode Step 3: Press “ AUTO “ Key to confirm the mode and run Auto Adjust. Features and Benefits Main Menu icon Sub Menu icon Sub Menu item Description N/A User mode User defined. Settings can be fine-tuned to suit any situation N/A ECO mode Adjusts the settings to reduce power consumption. N/A Standard mode Default Setting. Reflects native display capability N/A Grahpic mod

  • Acer H276HL, EN-1 UNPACKING Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. z LCD Monitor z AC Power Cord z D-Sub Cable (Optional) z DVI Cable (Optional) z AC Adapter z User Manual z Quick Start Guide Audio Cable (Optional) MHL cable (Optional) HDMI cable (Optional) z z z MHL © 2 0 1 2 , A c e r I n c . A l l r i g h t s r e s e r v e d . LCD Monitor P/N:MC.LX111.002 This CD contains • User’s manual • Quick Start Guide • Acrobat Reader

  • Acer H276HL, ENERGY STAR ® Acer’s ENERGY STAR qualified products save you money by reducing energy costs and helps protect the environment without sacrificing features or performance. Acer is proud to offer our customers products with the ENERGY STAR mark. What is ENERGY STAR? Products that are ENERGY STAR qualified use less energy and prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. Acer is committed to offer products and services worldwide that h

  • Acer H276HL, EN-12 Adjusting the OSD settings The OSD can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings. For advanced settings, please refer to following page: Adjusting the picture quality 1 Press the MENU key to bring up the OSD. 2 Using the e/ f keys, select Picture from the OSD. Then navigate to the picture element you wish to adjust. 3Use the e/ f keys to adjust the sliding scales. 4 The Picture menu can be used to adjust the current Brightness, Contrast, Colour Temp, Auto Config and other image-relat

  • Acer H276HL, EN-5 CONNECTOR PIN ASSIGNMENT 15-Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Logic Ground 3. Blue 11. Monitor Ground 4. Monitor Ground 12. DDC-Serial Data 5. DDC-return 13. H-Sync 6. R-Ground 14. V-Sync 7. G-Ground 15. DDC-Serial Clock 8. B-Ground 24-Pin Color Display Signal Cable* PIN Meaning PIN Meaning 1. TMDS Data2- 13. NC 2. TMDS Data2+ 14. +5V Power 3. TMDS Data 2/4 Shield 15. Logic Ground 4. NC 16. Hot Plug Detect 5. NC 17. TMDS Data0- 6. DDC Clock 18. TMDS Data0+

  • Acer H276HL, EN-14 Adjusting the setting 1 Press the MENU key to bring up the OSD. 2 Using the e/ f keys, select Setting from the OSD. Then navigate to the feature you wish to adjust. 3 The Setting menu can be used to adjust the screen Menu Language and other important settings.

  • v ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. • Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating.

  • Acer H276HL, EN-3 CONNECTING THE POWER CORD z Check first to make sure that the power cord you use is the correct type required for your area. z This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. z Plug one end of the AC power cord to the adapter, and plug the other end into an AC outlet. z For unit using at 120 V AC: Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V. z For unit using at 220/240 V AC (outside of U.S.): Use a Cord Set consisting of H05VV-F cord and plug rated 10 A, 250 V. The cord set should have the appropriate safety approvals for the country

  • Acer H276HL, vi Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Potentially explosive environments Switch off your device in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could

  • EN-17 ( DVI/HDMI/MHL cable) ProblemsCurrent StatusRemedy LED ON·Using OSD, adjust brightness and contrast to maximum or reset to their default settings. LED OFF·Check the power switch. ·Check if AC power cord is properly No Picture connected to the monitor. LED displays ·Check if video signal cable is properly blinking blue connected at the back of monitor. �

  • Acer H276HL, vii Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. This product has been shipped enabled for power management: • Activate display’s Sleep mode within 15 minutes of user inactivity. • Activate computer’s Sleep mode within 30 minutes of user inactivity. • Wake the computer from Sleep mode by pushing the power button. LCD pixel statement Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis or other musculoskeletal disorders. The following symptoms may appear in the hands, wrists, arms, shoulders, neck or back

  • EN-15 Product information 1 Press the MENU key to bring up the OSD. 2 Using the e/ f keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input. 1920 x 1080 Information H:65KHz V:60Hz VGA Input S/N:ETL5309 1326350380B3742

  • Acer H276HL, viii Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes • Rest your eyes frequently. • Give your eyes regular breaks by looking away from the monitor and focusing on a distant point. • Blink frequently to keep your eyes from drying out. Display • Keep your display clean. • Keep your head at a higher level than the top edge of the display so your eyes point downward when looking at the middle o

More Instructions:

DOWNLOAD

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Mitsubishi Electric WS-48513 Service manual mitsubishi-electric/ws-48513-24Y.pdf 01 Oct 2022 16
2 Proteco TX312 Instructions for use proteco/tx312-TS3.pdf 19 Mar 2023 4
3 Uniden DSC Owner's manual uniden/dsc-A5Z.pdf 17 Sep 2023 23 0.6 Mb
4 Atrie WireSpan 3000 Operation & user’s manual atrie/wirespan-3000-E63.pdf 24 Jul 2022 48
5 AMC CVT3100MKII Instructions for installation and operation manual amc/cvt3100mkii-IZ2.pdf 18 Jul 2022 12
6 Matrix Orbital EVE2 Hardware manual matrix-orbital/eve2-U98.pdf 31 Dec 2022 15

Similar Resources:

  • Samsung

    SNOW-1703U

    (98 pages)
    User ManualThe color and the appearance may differ depending on the product, improve the performance.SNOW-1703UIF015H IF020H IF025H …
  • Eneo

    VMC-26LCD-PW1

    (68 pages)
    1Montage- und BetriebsanleitungLCD-Farbmonitor mit eingebautem 4-Kanal Multiplexer VMC-26LCD-PW1Installation and Operating InstructionsColour LCD-Monitor with built-in 4 Channel Multiplexer VMC-26LCD-PW1 …
  • SEGUE

    RE-1050

    (5 pages)
    © 2020Plan ViewPerspective View10’10’1:2 @Scale: 10RE-1050 10’x10’ Hybrid DisplayIf you would like to tell us about your experience with your setup instructions please email us at [email protected] INSTRUCTIONS …
  • Samsung

    2032BW

    (60 pages)
    㫖㫖 㫖㫖㫖㩷 㫖㫖㫖㩷㫖㫖㫖 㫖㫖㫖㩷 㫖㫖㫖㫖㫖㫖㫖㩷㫖㫖SyncMaster 2032GW / 2232GW GG GGGG G 㫖㫖 㫖㫖㫖㩷 㫖㫖㫖㩷㫖㫖㫖 㫖㫖㫖㩷 㫖㫖㫖㫖㫖㫖㫖㩷㫖㫖 2032BW / 2232BW GG GGGG G …
  • ViewSonic

    LD163-181

    (93 pages)
    LD163-181All-in-one Direct View LED DisplayUser GuideModel No. VS18325P/N: LD163-181IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from V …
  • AG Neovo

    ER-19

    (2 pages)
    P/C:ER1910_ER1920 Version 01.2, 20080116 f 19” ENDOSCOPY COLOUR LCD DISPLAY ER-19 f FEATURES  Supreme Performance & Natural Colour Reproduction  Colour Control in Detail  12-Bit Gamma Correc …

Comments, Questions and Opinions: