Samsung MIM-H03UN User & Installation Manual

Text of Samsung MIM-H03UN User Guide:

• Samsung MIM-H03UN, QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A - Consumer Electronics 1-800-SAMSUNG(726-7864) www.samsung.com/us/support U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us/support CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) CAC Wifi APP-NA_IBIIM_EN_DB68-05417A-00.indd 24 2015-03-16 오후 2:21:50

• Smart AC application MIM-H03UN Multi Wi-Fi kit user & installation manual imagine the possibilities EN FR DB68-05417A-00 CAC Wifi APP-NA_IBIIM_EN_DB68-05417A-00.indd 25 2015-03-16 오후 2:21:50

• 2 Contents Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Check before installing Wi-Fi kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

• 3 Safety precautions This installation manual explains how to install a Wi-Fi kit to an indoor unit of Samsung system air conditioners Read the installation manual thoroughly before installing the Wi-Fi kit. (Refer to the appropriate manual for installing product or other optional parts.) WARNING Hazards or unsafe practices that may result in severe personal injury or death. CAUTION Hazar

• Samsung MIM-H03UN, 4 Check before installing Wi-Fi kit Parts Assy Wi-Fi kit Cable tie (2) Cable clamp (3) M4×16 screw (5) User & Installation manual U- terminal (6) • Wi-Fi kit should be installed by a certified installer. • Before installing a Wi-Fi kit, you should check whether the power of the kit is turned off. • The wire of Wi-Fi kit should be installed in accordance with electric wiring regulation and should also be installed inside the wall so that it cannot be touched by users. Exterior dimension 120 mm (4 3/4 inches) 124 mm (4 7/8 inches) 27.7 mm (1 1/8" inches) Unit : mm (inches) CAUTION CAC Wifi

• Samsung MIM-H03UN, 5 How to install Wi-Fi kit Wi-Fi kit installation • For smooth operation, install the Wi-Fi kit and the wireless router in open space with no obstacles between them. Operation may not be possible if the distance between the Wi-Fi kit and the wireless router is too far or if there's any obstacle between them. 1. After pushing the two hooks on the bottom of the Wi-Fi kit at the same time, lift the front cover up and then detach it from the rear cover.  Push the two hooks at the same time. • It might be easier to disassemble the Wi-Fi kit if you put a flat-head screw driver into the square hole above the fixing hook. 2. Place the power wire

• Samsung MIM-H03UN, 6 How to install Wi-Fi kit 3. After fixing the rear cover of a Wi-Fi kit firmly into the wall with two or more screws, connect the power wire (V1, V2) and communication wire (F1, F2) to the terminal at the back side of the front cover with proper length. When connecting the V1 and V2 power, tighten the screw of the terminal block (CN5) with torque 5 ±2 Kgf·cm. The size of the screws is 3 x 6. • Maximum number of indoor unit installation that can be connected to Wi-Fi kit is 16. • One Wi-Fi kit can be registered with maximum 5 users. • Each account (one mobile phone) can be registered with maximum 2 Wi-Fi kits. Ⓑ Ⓐ Ⓓ Ⓒ 10 mm

• Samsung MIM-H03UN, 7 4. Reassemble the Wi-Fi kit. • Put the front cover of the kit into the upper grooves first and then fit it as shown in the picture. After assembling the Wi-Fi kit, please check if there is any gap because of the connection cable between front cover and rear cover. • When installing a Wi-Fi kit with 10 m (32.8 feet) or more wire, the communication wire and power wire of a Wi-Fi kit should be installed separately. (The Wi-Fi kit will malfunction because of electrical fault. ) • When installing a Wi-Fi kit on the wall, select proper thickness of wires in the consideration of the hole size for wire on the wall. • Wire for Wi-Fi kit PCB connection - Whe

• Samsung MIM-H03UN, 8 Checking the Wi-Fi kit Power LED AP Button Wi-Fi Connect LED Reset Wi-Fi Configure LED <Wi-Fi kit front view> LED status information NO LED Status Power Wi-Fi Connect Wi-Fi Congure 1 Initialized ON ON ON 2 Normal ON ON OFF 3 AP Connection OK. But, Internet is not Connected ON Blinking OFF 4 Air conditioner searching OK. but AP connection is not completed. ON OFF OFF 5 Wi-Fi Modem is in Malfunction Blinking Blinking Blinking 6 Searching AP (AP mode) ON OFF ON 7 Searching Air conditioner Blinking Blinking OFF 8 No Air Conditioner Information Blinking OFF OFF How to install Wi-Fi kit CAC Wifi APP-NA_IBIIM_EN_DB68-05417A-00.indd 8 2015-03-16 오후 2:21:46

• Samsung MIM-H03UN, 9 Initializing user data  If you want to initialize all the user data to set the Wi-Fi kit as factory default status, press and hold the button (SW3) inside the Wi-Fi kit for 5 seconds. After releasing the button, all the lamps on the Wi-Fi kit are turned on and all the user data is deleted. Updating the Wi-Fi kit by SD card Ⓓ Ⓒ  Make update directory in the SD card. Copy the latest S/W image and paste it into the update directory of the SD card.  Insert the SD card into the SD card

• Samsung MIM-H03UN, 10 Setting the network • This product supports DHCP (Dynamic Host Configuration Protocol) only. Before connecting the router to the Wi-Fi kit, check whether the DHCP server option function of your wired/wireless router is activated. • Select a channel for wired/wireless router. The channel should be currently not in use. • The cipher mode of wired/wireless router supports Open, WPA/TKIP or WPA2/AES. Except for the above modes, the Wi-Fi kit may not be connected to wired/wireless router. In case of 802.11n, WPA2/AES mode is recommended. • The quality of wireless network connection can be affected by surroundi

• Samsung MIM-H03UN, 11 Starting Samsung Smart Home App Downloading Samsung Smart Home App  You can download the Samsung Smart Home App by searching "Samsung Smart Home" on Play store, Galaxy Apps and iPhone App Store. For android phone  Korean key word : 삼성 스마트 홈  English key word : Samsung Smart Home For iPhone  Korean key word : 스마트 홈  English key word : Smart Home • Samsung Smart Home App supports android operating system 4.0(ICS) or higher and is optimized with Samsung Smart phones (Galaxy S or Note seri

• Samsung MIM-H03UN, 12 Starting Samsung Smart Home App Running the Samsung Smart Home App Before using the Samsung Smart Home App, register the Samsung account.  If you are a Samsung Smart phone user, you can automatically log on to the App with the Samsung account.  If you are not a Samsung Smart phone user, the login page appears every time you use the Samsung Smart Home App. • If you are a Samsung Smart phone user but don’t have Samsung account, the Samsung account registration page appears every time you run the Samsung Smart Home App. • If you don’t have Samsu

• Samsung MIM-H03UN, 13  Search the country where the product will be used and press the Save button. It appears only one time at the first operation. Registering the product Register the Wi-Fi kit on the Samsung Smart Home App. 1. Select the ‘Add new’. 2. Select the ‘System AC’. 3. Enter the information of wireless router which will be connected and then press the Next button. - If you want to change the connected router, press the ( ) icon and select the AP name of the wireless router. CAC Wifi APP-NA_IBIIM_EN_DB68-05417A-00.indd 13 2015-03-16 오후 2:21:47

• Samsung MIM-H03UN, 14 4. Press the AP button on the side of the Wi-Fi kit according to the guidance on the screen. Check that the AP lamp is turned on on the Wi-Fi kit. 4-1. For an android phone 4-2. For an iPhone - Press the Home button on the iPhone to exit the Samsung Smart Home App. - Press Settings  Wi-Fi and select the DIRECT-SMARTDVM on the list of the wireless routers and enter 1111122222. - Check that the iPhone is connected to the DIRECT-SMARTDVM wireless router. - Press the Home button on the iPhone

• Samsung MIM-H03UN, 15 5. Network setting is automatically performed. 6. Screen lock function setting for Samsung Smart Home App appears • When the lock function is set, the authentication process is required every time you run the App. 7. When the product registration is completed, the main screen of the Samsung Smart Home App appears. - System AC icon is added on the device list. • If the wired/wireless router is not Wi-Fi certified product, it may not be connected to Wi-Fi kit. • If the router is installed near a microwave oven or a product (washing machine), smart control function may not work correctly due to electronic interference. • If you fail to register during the registration pr

• 16 Main screen ① ② ③ ① Select the icon of smart appliance (System AC) on the main screen to move to the screen of Smart Home Device Control. ② You can perform integrated control of Samsung smart appliances by 4 types such as Going out, Coming home, Good night, and Good morning. ③ You can check indoor view with the Home view function. - Wi-Fi k

• Samsung MIM-H03UN, 17 Starting System Air conditioner App Smart home device control The Smart home device control functions of air conditioner such as Operation, Additional options, On/Off timer, Electric Power, Settings etc. 1. Select the System AC icon on the devices screen of Samsung Smart Home App. 2. The loading screen of System Air Conditioner App appears. 3. The list of indoor units installed with the Wi-Fi kit appears. - If there are no indoor units connected to Wi-Fi kit, "No Indoor Units" appears and you cannot enter the System Air Conditioner App. CAC Wifi APP-NA_IBIIM_EN_DB68-05417A-00.indd 17 20

• Samsung MIM-H03UN, 18 Indoor unit list screen ① ⑤ ⑧ ④ ② ③ ⑦ ⑥  List of indoor units installed on the Wi-Fi kit is displayed on the screen. Classication Item Description ① Device status When the air conditioner is turned on, ( ) is displayed, when it is turned off, ( ) is displayed. ② Error status When the air conditioner has error, ( ) is displayed. ③ Communication error When the air conditioner has communication error, ( ) is displayed. ④ Temperature Displays current or set temperature. ⑤ Power Turns on or off the air conditioner. ⑥ Power for all air conditioners Turns on or off all the air condi

• 19 Editing the indoor unit list ① ② ③ 1. Press the Menu  Edit button to edit the name and order of indoor units. The name of indoor unit should be within 30 characters. 2. Select the name of indoor unit to edit the name. 3. Select the( ) button and drag and drop the indoor units to change the order. Electric Power This function works only with the indoor units tha

• Samsung MIM-H03UN, 20 Settings  Press the Menu  Settings to check and set the version information of Wi-Fi kit.  Press the Temp. numerical values to set adjustment unit of set temperature.  Press the Temp. unit to set display unit of temperature. • If the temperature unit is set as °F, the Temp. numerical values can be set by 1 °C only. CAUTION Starting System Air conditioner App CAC Wifi APP-NA_IBIIM_EN_DB68-05417A-00.indd 20 2015-03-16 오후 2:21:49

• Samsung MIM-H03UN, 21 Updating the Wi-Fi kit  When a new program is released with the update of the Wi-Fi program, update notice is delivered through the mobile App.  If a user agrees with the update, Wi-Fi kit starts the update.  When the update is completed, the Wi-Fi kit is restarted automatically. CAC Wifi APP-NA_IBIIM_EN_DB68-05417A-00.indd 21 2015-03-16 오후 2:21:50

• Samsung MIM-H03UN, 22 Troubleshooting Before you call a service center, please check the items in the table below. Problem Solution Samsung Smart Home App cannot be searched on Play store, GALAXY Apps or iPhone App Store.  Samsung Smart Home App supports android operating system 4.0(ICS) or higher. For iPhone, the App supports iOS 7 or higher. After installing Samsung Smart Home App, the air conditioner cannot be connected to the App. Connect the air conditioner to wireless router by referring to "Registering the product" section in the user manual. Samsung account cannot be a

• Samsung MIM-H03UN, 23 Open Source Announcement The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product by sending an email to mailto:[email protected]. It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM; a minimal charge will be required. The following URL http://opensource.samsung.com/opensource/WIFIKIT/seq/0 leads to the download page of

More Instructions:

Samsung MIM-H03UN User & installation manual 26-11-2023 22

DOWNLOAD

Related Products and Documents (Adapter):

Comparable Devices:

Similar Resources:

• Tews Technologies TPMC883 (10 pages) The Embedded I/O Company TPMC883 10/100/1000 Mbit/s Ethernet Adapter Version 1.0 RoHS comliant Version: Version 2.0 User Manual Issue 1.2 March 2008 D76883800 TEWS TECHNOLOGIES GmbH TEWS TECHNOLOGIES LLC Am Bahnhof 7 25469 Halstenbek, Germany www.tews.com Phone: +49-(0)4101-4058-0 Fax: +49-(0)4101-4058-19 e-mail: [email protected] 9190 Double Di …

• Cotell IH2510E-A-WM (8 pages) IH2510E-A-WM 1 Installation Guide IH2510E (Wall-Mount) …

• StarTech.com 25SATSAS35HD (2 pages) Quick Start GuideFR: Guide de l’utilisateur - fr.startech.comDE: Bedienungsanleitung - de.startech.comES: Guía del usuario - es.startech.comNL: Gebruiksaanwijzing - nl.startech.comP T: Guia do usuário - pt.startech.comI T: Guida per l’uso - it.startech.comJP: 取扱説明書 - jp.startech.comManual Revision: 04/04/2018For the most up-to-date informatio …

• Steren ELI-820 (2 pages) Product / Producto: 2A REGULATED CAR POWER ADAPTER / CONVERTIDOR PARA ENCENDEDOR DE AUTO DE 2AModel / Modelo: ELI-820Brand / Marca: SterenCONDICIONES1. Para hacer efectiva esta garantía se requiere: La presentación de esta póliza y del producto, en el lugar en donde fue adquirido o en ELECTRONICA STEREN S.A. DE C.V.2. ELECTRONICA STEREN S.A. DE C.V. se …

• Siemens Simatic S7-300 (16 pages) Getting Started - Commissioning a CPU 31xC: Closed-loop control ____________________________________________________________________________ SIMATIC S7-300 Getting Started - Commissioning a CPU 31xC: Closed-loop control Getting Started 08/2011 A5E00105534-03 Introduction 1 Preparation 2 Learning units 3 Further Information 4 …

• VOLTCRAFT VC-12178285 (3 pages) b) Angeschlossene Geräte• Beachten Sie auch die Sicherheits- und Bedienungshinweise der übrigen Geräte, die an dieses Produkt angeschlossen sind.c) Produkt• Zerlegen Sie das Produkt und insbesondere den verbauten Stecker nicht in ihre einzelnen Komponenten.• Überschreiten Sie nicht die Höchstwerte des angegebenen Spannungs- und Strombereichs.� …

Comments, Questions and Opinions: