Manualios.com

Acer PD525 Operation & User’s Manual

Acer PD525 Manual Online:

3.3, 2759 votes
Acer PD525 User Manual
Acer PD525 User Guide
Acer PD525 Online Manual

Text of Acer PD525 User Guide:

  • 5 ... English Power Cord 1.8m VGA Cable 1.8m Remote Control with Laser Pointer 2 x Battery Introduction Composite Video Cable 2.0m Projector with lens cap Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Carrying Case USB Cable 1.8m User’s Guide Qui

  • Acer PD525, 1 ... English Table of Contents Table of Contents ....................................................................................... 1 Usage Notice .............................................................................................. 2 Precautions......................................................................................................... 2 Introduction................................................................................................ 4 Product Features ................................................................................................ 4 Package Overview ............................

  • Acer PD525, 13 ... English Adjusting the Projected Image Adjusting the Projector Image Height Tilt Adjusting WheelElevator Foot 1 2 3 Elevator Button The projector is equipped with an elevator foot for adjusting the image height. To raise the image: 1. Press the elevator button n. 2. Raise the image to the desired height angle o, then release the button to lock the elevator foot into position. 3. Use p to fine-tune the display angle. To lower the image: 1. Press the elevator button. 2. Lower the image, then release the button to lock the elevator foot into position. 3. Use p to fine-tune the display angle. Installation

  • Acer PD525, 7 ... English Control Panel 1. Lamp Indicator LED 2. Temp Indicator LED 3. Power/Standby and Indicator LED (Power LED) 4. Source 5. Re-Sync 6. Four Directional Select Keys 7. Menu /Enter Introduction 6 1 2 3 7 4 5

  • Acer PD525, 18 English ... Language (Computer / Video Mode) Language Choose the multilingual OSD menu . Use the or key to select your prefered language. Press “Menu” on the Remote Control or press “Menu/Enter”on the Control Panel to finalize the selection. User Controls

  • Acer PD525, 30 English ... Problem: The image is outstretched when displaying 16:9 DVD. The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting. If the image is still outstretched, you will also need to adjust the aspect ratio by referring to the following: 4 Please select 4:3 aspect ratio type on your DVD player if you are playing a 16:9 DVD. 4 If you can’t select 4:3 aspect ratio type on your DVD player, please select 4:3 aspect ratio in

  • Acer PD525, 15 ... English User Controls Remote ControlControl Panel Control Panel & Remote Control There are two ways for you to control the functions: Remote Control and Control Panel. Using the Control Panel Power/Standby 4 Refer to the “Power On/Off the Projector” section on pages 11-12. Source 4 Press “Source” to choose RGB, Component-p, Component-i, S-Video, Composite Video, DVI-D (Optional) and HDTV sources. Menu / Enter 4 Press “Menu/Enter” to launch the on screen display (OSD) menu. To exit OSD, press “Menu” again. 4 Confirm your selection of items. Four Directio

  • 34 ... English VESA VGA 640 x 350 70 31.5 70 31.5 VESA VGA 640 x 350 85 37.9 85 37.9 VESA VGA 640 x 400 85 37.9 -- -- VESA VGA 640 x 480 60 31.5 60 31.5 VESA VGA 640 x 480 72 37.9 72 37.9 VESA VGA 640 x 480 75 37.5 75 37.5 VESA VGA 640 x 480 85 43.3 85 43.3 VESA VGA 720 x 400 70 31.5 70 31.5 VESA VGA 720 x 400 85 37.9 85 37.9 SVGA 800 x 600 56 35.2 56 35.2 SVGA 800 x 600 60 37.9 60 37.9 SVGA

  • Acer PD525, 19 ... English Color (Computer / Video Mode) User Controls Display Mode There are many factory presets optimized for various types of images. 4 PC : For computer or notebook. 4 Video : For playing video in a bright environment. 4 Theatre : For Home Theatre usage in a dark room. 4 User : Memorize user’s settings. Brightness Adjust the brightness of the image. 4 Press the to darken image. 4 Press the to lighten the image. Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. 4 Press the to decrease the contrast.

  • Acer PD525, 12 English ... Installation Warning Indicator  When the “LAMP” indicator lights solid red, the projector will automatically shut itself down. Please contact your local reseller or service center.  When the “TEMP” indicator lights solid red for about 20 seconds, it indicates the projector has been overheated. You will see a message “Projector Overheated. Lamp will automatically turn off soon.” on the on-screen display. The projector will automatically shut itself down. Under normal conditions, the projector can be switched on again after it has cooled down. If the problem persists, you sho

  • Acer PD525, 31 ... English Problem: Message Reminders 4 “Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!” will be shown about 10 seconds when lamp life is going to deplete. 4 “Projector Overheated. Lamp will automatically turn off soon.” will be shown when the system temperature is over heat. 4 “Fan fail. Lamp will automatically turn off soon.” will be shown when the fan is out of order. Appendices

  • Acer PD525, 27 ... English Management (Computer / Video Mode) My Start Screen Acer My Start-up Screen is a PC utility for user to change the default start-up screen of Acer projector to their desired image. You can install My Start-up Screen from the bundled CD. Connect the projector to your PC with the bundled USB cable then execute My Start-up Screen utility to download your desired image from your PC to projector. Before the download starts, the projector must enter “Download Mode” first. Please follow the instruction below to enter “Download Mode”. 1. If the AC powe

  • Acer PD525, 25 ... English ECO Mode Choose “On” to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose ”Off” to return normal mode. Menu Location Choose the Menu location on the display screen. Projection 4 Front-Desktop The factory default setting. 4 Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen. 4 Front-Ceiling When you select this function, the projector turns the image upside down for ceiling-mounted projection. 4 Rear-Ceiling When you select this function, the proje

  • Acer PD525, 17 ... English The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or press “Menu/Enter”on the Control Panel. 2. When OSD is displayed, use keys to select any item in the main menu. After selecting the desired main menu item, press to enter sub menu for feature setting. 3. Use keys to select the desired item and adjust the settings by key. 4. Select the nex

  • Acer PD525, 28 English ... Appendices Problem: No image appears on screen. 4 Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. 4 Ensure the pins of connectors are not crooked or broken. 4 Check if the projection lamp has been securely installed. Please refer to the “Replacing the lamp” section. 4 Make sure you have removed the lens cap and the projector is switched on. 4 Ensure that the “Hide” feature is not enabled. Problem: Par

  • Acer PD525, 32 English ... Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message “Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!” When you see this message, changing the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. Warning: Lamp compartment is hot! Allow it to cool down before changing lamp! Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped. 1 3 4 Appendices 2 Lam

  • 26 English ... Source Lock When source lock is turned off, the projector will search for other signals if the current input signal is lost. When source lock is turned on, it will “Lock” the current source channel before you press “Source” button on remote control for next channel. Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours). Lamp Hour Reset Press

  • Acer PD525, 3 ... English Do:  Turn off the product before cleaning.  Use a soft cloth moistened with mild detergent to clean the display housing.  Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t:  Block the slots and openings on the unit provided for ventilation.  Use abrasive cleaners, waxes or solvents to clean the unit.  Use under the following conditions: - In extremely hot, cold or humid environments. - In areas susceptible t

  • Acer PD525, 20 English ... Color (Computer / Video Mode) User Controls White Segment Use the white Segment control to set the white peaking level of DMD chip. 0 stands for minimal segment, and 10 stands for maximum segment. If you prefer a stronger image, adjust towards the maximum setting. For a smooth and more natural image, adjust towards the minimum setting. Degamma Effects the represent of dark scenery. With greater gamma value, dark scenery will look brighter. Saturation Adjusts a video image from black and white to fully saturated color. 4 Press the to decrease the amount of color in the image. 4 Press the to increase the amount of color in the image.  “Saturation”

  • Acer PD525, 21 ... English Color (Computer / Video Mode) User Controls Tint Adjusts the color balance of red and green. 4 Press the to increase the amount of green in the image. 4 Press the to increase the amount of red in the image. Color R Adjusts the red color. Color G Adjusts the green color. Color B Adjusts the blue color.

  • Acer PD525, 22 English ... User Controls Keystone Adjust image distortion caused by tilting projection. (±16 degrees) Aspect Ratio Use this function to choose your desired aspect ratio. 4 4:3 : The input source will be scaled to fit the projection screen. 4 16:9 : The input source will be scaled to fit the width of the screen. 4 Auto : Keep the image with original width-higth ratio and maximize the image to fit native horizontal or vertical pixels. H.Position (Horizontal Position) 4 Press the to move the image left. 4 Press the to move the image right. V. Position (

Related Products and Documents (Projector):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sony RM-V8 Operating instructions sony/rm-v8-1KC.pdf 13 Mar 2024 2
2 Foif A20 Operation & user’s manual foif/a20-LCP.pdf 24 Feb 2024 61
3 Anthem I225 Operating manual anthem/i225-U3N.pdf 21 Sep 2022 16 0.7 Mb
4 Logitech 967929-0403 - G11 Gaming Keyboard Wired Installation instructions logitech/967929-0403-g11-gaming-keyboard-wired-CX2.pdf 22 Nov 2023 2
5 Black Box 1-In/12-Out Audio/Video Baseband Amplifier Specifications black-box/1-in-12-out-audio-video-baseband-amplifier-WK7.pdf 06 Nov 2023 1 0.11 Mb
6 ATIKA COMET 130 S - Operating instructions manual atika/comet-130-s-P17.pdf 06 Jul 2022 96 3.13 Mb

Similar Resources:

  • Optoma

    ES522

    (1 pages)
    © Copyright 2009 Optoma Technology, Inc. All specifications subject to change at any time. DLP® and the DLP logo are registered trademarks of Texas Instruments.www.optoma.comDisplay TypeSingle 0.55” DMD DLP Technology by Texas InstrumentsResolutionNative SVGA (800 x 600)Maximum ResolutionWUXGA (1920 x 1200)Brightness (Typical)2800 ANSI Lumens Contrast …
  • Sanyo

    PLC-XC56

    (82 pages)
    Multimedia Projector MODEL PLC-XC56Owner’s ManualNetwork Supported Refer to the Owner's Manuals below for details about network function. Network Set-up and Operation PJ Network Manager …
  • Hitachi

    MP-WU8101W

    (120 pages)
    1QM00973-1LCD ProjectorUser's Manual (detailed) Network GuideThank you for purchasing this product.This manual is intended to explain only the network function. For proper use of this product, please refer to this manual and the other manuals for this product.FeaturesThis projector has the network function that brings you the following main features.WAR …
  • Acer

    P5270

    (2 pages)
    High-performance color projectionWith 3000 ANSI Lumens brightness, native XGA (1024 x 768) resolution, and up to WSXGA (1680 x 1050) format support via Acer SmartFormat Technology, the P5270 delivers vivid, high-brightness projection for SMB, classroom and enterprise conference situations. Suitable for a wide range of usage scenarios, the P5270 is …
  • LG

    LP-XG12

    (48 pages)
    LP-XG12OWNER’S MANUALLG LCD PROJECTORLG LCD PROJECTORPlease read this manual carefully before operatingyour set. Retain it for future reference.Record model number and serial number of the set. See the label attached on the bottom of the set andquote this information to your dealer when yourequire service.Model number :Serial number : …
  • Sony

    VPL-VW90ES - Home Cinema Projector

    (2 pages)
    Installation Features• Anamorphic mode• 144 zone panel alignment• Built in IR transmitter for 3D, supports wired 3D transmitter accessory• Motorized zoom/shift/focus• Zoom 1.6x• Shift range: +/-0.65V, +/-0.25H• Screen sizes 40"-300"• Ultra-low fan noise 20dBVPL-VW90ESHome Cinema ProjectorElevate the standard of your home theater w …

Comments, Questions and Opinions: