LG LVW900 series Operation & User’s Manual

Text of LG LVW900 series User Guide:

• LG LVW900 series, Operation and settings 45 INDOOR: The color temperature range for the proper - white balance is approximately 3,200°K. OUTDOOR: The color temperature range for the - proper white balance is approximately 5,100°K. RED: Set the desired red value. (-100~100) > BLUE: Set the desired blue value. (-100~100) > Day/Night settings 1. Select [DAY/NIGHT] option. 2. Use or button to select mode for day/night function. AUTO: You will be able to change the Day/Night mode auto-• matically. Note: If you set the AGC to [OFF] or the SHUTTER is set to one of the SHUTTER options except AUTO on the [EXPOSURE] menu, the AUTO mode of the DAY/NIGHT

• LG LVW900 series, 14 Connections Connecting Microphone and Speaker Device Optionally connect an active speaker and/or external microphone with a built-in amplifier. AUDIO OUT AUDIO IN Note: Keep the microphone away from the speaker to avoid howling.

• 42 Operation and settings Main Menu Sub Menu Contents SPECIAL D-ZOOM OFF ON ZOOM PAN TILT EXIT D-EFFECT OFF/ V-FLIP/ MIRROR/ ROTATE SHARPNESS 0~68 STABILIZER OFF/ ON COLOR OFF/ ON USER TITLE OFF/ ON LANGUAGE English (The supported language can be different depending on the model.) EXIT RET/TOP/END RESET CAMERA REBOOT - FACTORY RESET - EXIT - EXIT - - General Operation 1. Cl

• LG LVW900 series, Introduction 9 klmno pq r k ETHERNET/POE Port Connects to a PC or a network via a hub with a 10BASE- T/100BASE-TX cable attached RJ-45 connector. Note: Power over Ethernet (PoE) is a technology that integrates power into a standard LAN infrastructure. It enables power to be provided to the network device, such as a network camera, using the same cable as that used for network connection. It eliminates the need for power outlets at the device locations and enables easier application of uninter- ruptible power supplies (UPS). l ALA

• LG LVW900 series, 10 Connections Connections Precautions Be sure to switch off the unit before installation and connection.• The installation should be made by qualified service personnel or system installers.• Do not expose the power and connection cables to moisture, which may cause damage to the unit.• Connection Overview PoE Device (IEEE802.3af ) PoE Device (IEEE802.3af)

• 12 Connections Connecting Power Source Connect power, using one of the methods listed below: To use the power adapter Connect a DC 12 V / AC 24 V power source to the power input terminal as shown below. (Connect to the DC 12 V / AC 24 V UL Listed, Class 2 Power Supply only on the unit. ) To use the PoE (Power over Ethernet) device Connect the PoE cable to the LAN port on the un

• Operation and settings 35 4. Select the authority drop down list to provide the access rights to each user and then click the [Save] to confirm your selection. Administrator: Allows you to operate setup - menus and to view live images. Power user: Use of the limited functions of - the system (The Configuration menu is not allowed. A power user can use

• LG LVW900 series, Reference 49 Reference Troubleshooting This section provides useful information to help you to resolve any difficulty you might have with your LG IP device. Fault symptoms, pos- sible causes and remedial actions are provided here. IP Setting problems ARP/Ping: Disconnect and reconnect the power to the network camera. The device should get the IP within 2 minutes. • Ping your camera: Open the command prompt on your computer, type ping with the IP address of the network device. The reply • obtained b

• LG LVW900 series, Operation and settings 23 1.2 Find and Copy IP Utility folder to your PC. 2. Discover the LG IP device using the IP Utility The IP Utility can automatically discover and display LG IP devices on your network. The IP Utility shows the MAC address, IP address, Model name and so on. Note: The computer running the IP Utility must be on the same network segment (physical subnet) as the LG IP device. 2.1 Run the IP Utility program. 2.2 Click the [Search] button or select the [Search] option in the Device search menu. After a few seconds the found LG IP devices gets dis- played in the IP Utility window. 3. Logging in to the LG Smart Web Viewer The LG Smart Web Viewer can be used

• LG LVW900 series, Connections 13 Connecting Alarm Device Alarm terminals are used to connect the alarm (relay) devices such as sensors, door switches, etc. ALARM IN / ALARM IN RETURN (Sensor Input) Connect the sensor device to the sensor input terminal. Sensor Device BLACK GREEN ALARM OUT / ALARM OUT RETURN (Relay Output) Connect the alarm (relay) device to the relay output terminal. Alarm signal is outputted at an event occurrence. Alarm (relay) Device RED WHITE Note: The Photo MOS Relay is rated for 100mA at 20V DC or 100mA at 28V AC.

• LG LVW900 series, 8 Introduction Part names and Functions abcd efghij a Pan lock screw Fixes the panning position after adjusting. b Zoom lock lever Fixes the zoom position after adjusting. c Focus lock lever Fixes the focus position after adjusting. d Heater Heater is thermostatically controlled to activated at <15 ºC (Dome inside) e Fall Prevention rubber band Fixes the rubber band into the dome cover. f Tilting lock screw Fixes the tilting position after adjusting. g Video Out connector Supplies analog video signal (composite) to the connected device. h OSD Setup menu control buttons Use to set the OSD Setup menu. i RESET button Push

• 30 Operation and settings GOP size: It means “Group of Pictures”. The higher > the GOP, the better is the video quality of the camera. Edit the value of GOP from 1 ~ 30. This setting is valid for H.264 video format only. Quality: Select the Quality. > VBR: The bit rate may vary depending on the - complexity of the video to meet the selected quality. CBR: The video quality m

• LG LVW900 series, 34 Operation and settings 3. Click the [Save] button. 4. Repeat the steps 1-3 to add additional IP address. Remove: Click this button to delete the IP address.• 1. Select the alias from the list. 2. Click the [Remove] button. The IP address will be deleted. User settings Basic The IP device is shipped with the login rights of administrator only. If others need to access the IP device excluding the con- figuration a login with viewer rights need to be created. A maxi- mum of 50 viewers can be created. User list Add the User > You can register a new user with various access rights. 1. Click the [

• LG LVW900 series, 54 Reference Zlib : Copyright © 1995-2002 Jean-loup Gailly and Mark Adler.• All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distrib- ute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the follow- ing conditions: THE SOFTWARE IS PROVIDE

• 5 Handling of the unit Be careful not to spill water or other liquids on the unit. Be cautions not to get combustible or metallic material inside the body. If used with foreign matter inside, the device is liable to fail or to get cause of fire or electric shock. Remove dust or dirt on the surface of the lens with a blower.• Use a dry soft cloth to clean the body. If it is

• LG LVW900 series, 6 Contents Contents Introduction ................................................................................... 7 Part names and Functions .................................................................8 Connections ................................................................................. 10 Precautions ........................................................................................... 10 Connection Overview .......................................................................10 Conne

• LG LVW900 series, Connections 15 Mounting the camera You can mount the camera on a ceiling or wall. Surface mount Follow the instructions below to surface mount the camera. 1. Use the installation guide template to check the mounting loca- tion. Face the front of the label toward the area of interest. Using the template as a guide, make a hole through the ceiling. 2. Pass the connection cable through the inner side of the ceiling. 3. Fasten the camera assembly bracket to the ceiling.

• LG LVW900 series, Reference 51 number of applications running on the client computer. If the client PC’s are unable to access the multicast stream, check with the system administrator for the use of a valid multicast address or • check if the router is supporting multicasting. If the images appear to have white of gray stripes on it, upgrade the Video graphics driver on the client PC to the latest version.• Video images may be noisy if you are using the camera in a very low light environment or the bit rate/quality is set t

• Introduction 7 The LG Network Dome Camera is designed to use on an Ethernet network and must be assigned an IP address to make it accessible. This manual contains instructions on how to install and manage the LG Network Dome Camera in your networking environment. Some knowledge of networking environments would be beneficial to the reader. Should you requ

• LG LVW900 series, Connections 11 Connecting Network You can control and monitor the system via network. With the remote control (monitoring), you can change the system configuration or monitor the image via network. After the installation, check the network settings for the remote control and monitoring work. Connect the IP camera to your network using a standard RJ-45 network cable as shown below. ETHERNET PoE Device (IEEE802.3af ) Broadband Service Broadband Service Router Broadband Service Broadband Service PoE Device (IEEE802.3af) Router

• LG LVW900 series, 26 Operation and settings Main Menu Sub Menu Network Basic RTP stream TCP/IP DDNS IP filtering User Basic Schedule Recording schedule Recording server Event Event schedule Event server Sensor & Relay Fan System settings Version Displays the current version of Firmware, Hardware, Software and Web Client. Date & Time Time zone Set the time difference from GMT in the area where the IP device is installed. Select the time zone in the area where the IP device is installed from the drop down list. Time mode Synchronize with NTP Server: Selec

• LG LVW900 series, Operation and settings 29 Audio & Video settings Camera Preview You can preview the camera image on the preview window. General Contrast: Edit the contrast value in steps of 1, from > 0 to 100. Selecting 100 provides the image with the highest contrast. Brightness: Edit to fine adjust the brightness of the > camera. It is brighter when a large value is selected and it is darker when a small value is selected. Standard: Displays the video standard of the camera. > Hue: Edit the video Hue of the camera from 0~100. > Save: Click this button to confirm the settings.• Default: Click this button to restore the IP device back to • original factory se

• LG LVW900 series, Reference 53 This product includes dhcp client : • Copyright © 2004-2008 by Internet Systems Consortium, Inc. (“ISC”) Copyright © 1995-2003 by Internet Software Consortium expat library : copyright © 2006 expat maintainers.• libcap• libjpeg : Independent JPEG Group Copyright © 1991 1998, Thomas G. Lane.• libmd5 : Copyright © 2002 Aladdin Enterprises.• libncurses : Copyright © 1998,2002 Free Software Foundation, Inc.• libpcre : Copyright © 1997-2009 University of Cambri

• LG LVW900 series, 3 Warning: Do not install this equipment in a confined space such as a bookcase or similar unit. Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70. Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. Caution: This installation should be made by a qualified service per- son and should conform to all local codes. Caution: To avoid electrical shock, do not open the cabinet. Refer

• LG LVW900 series, Operation and settings 47 PAN: Use • or button to move the screen. (left or right) TILT: Use • or button to move the screen. (up or down) D-EFFECT (Digital effect) You can select the digital effect. 1. Select [D-EFFECT] option on the [SPECIAL] menu. 2. Use or button to select a digital effect. V-FLIP: Flip the picture vertically. • MIRROR: Turn on the mirror effect.• ROTATE: Rotate the picture. (180°) • OFF: Turn off the digital effect.• SHARPNESS The degree to whi

• LG LVW900 series, Operation and settings 37 DUPLICATED (C,V,S): Recording starts automati- - cally from the preset time. When VA or SENSOR event is detected, change the continuous record- ing mode to the VA event recording mode or the sensor event recording mode. 6. Click the [Save] button to confirm the settings. To edit the Recording Schedule 1. Choose the particular schedule in the Total schedule list that needs to be edited. 2. Click the [Edit] button. You can check or edit the recording schedule options. To activate the Recording Schedule 1. Set the [Stream] option. This would give an option to set either the Master stream or the Slave str

More Instructions:

LG LVW900 series Owner's manual 31-08-2022 66

DOWNLOAD

Related Products and Documents (Security Camera):

Comparable Devices:

Similar Resources:

• Security Cameras Direct CDC3115IR (24 pages) Infrared Dome CCD Camera User ManualProducts: CDC3115IR, CDC3114VF, CDC3114VF2, CDC3114IR2Please read this manual before installing and using this camera and always follow instructions for proper use. Please le this manual away for future reference. CDC311_CM …

• Lorex LEV1512 SERIES (2 pages) Contents• Weatherproof HD dome camera*• Mounting kit*• 60ft/18m UL-rated BNC / power extension cable*• Power adapter**Copyright © 2016 Lorex CorporationAs our products are subject to continuous improvement, Lorex Corporation reserves the right to modify product design, specifications and prices, without notice and without incurring any obligatio …

• Toa C-RF1000 (8 pages) INTERFACE UNITC-RF1000REMOTE CONTROLLERPOWER/DVR4321INTERFACE UNIT C-RF1000OPERATING INSTRUCTIONS1. SAFETY PRECAUTIONS .......................... 22. GENERAL DESCRIPTION ........................ 33. FEATURES ................................................ 34. HANDLING PRECAUTIONS ..................... 35. NOMENCLATURE AND FUNCTIONSFront panel .......... …

• AOpen VC324 USB (8 pages) IntroductionThank you for choosing the VC324 USB Video Conferencing Kit. VC324USB is a Windows 98 video conferencing packages that supports the newH.324 video conferencing protocal over standard telephone lines orinternet. With a modem, a full-duplex audio card, you can communicatewith anyone anywhere at any time. VC324 USB also offers videocapturing functio …

• Foscam FI9803EP (2 pages) 2 Software Installation1. Insert the CD into the CD drive of your computer.Shortcut icon for Windows OS Shortcut icon for Mac OS2. Go to the folder “IP Camera Search Tool” and find the folder “For Windows OS”or “For Mac OS”. Copy and paste the IP camera tool file to your computer, or drag it onto your desktop.3 Access the Camera5. After l …

• Axis P3304 (58 pages) USER’S MANUALAXIS P3301 Fixed Dome Network CameraAXIS P3301-V Fixed Dome Network CameraAXIS P3304 Fixed Dome Network CameraAXIS P3304-V Fixed Dome Network Camera …

Comments, Questions and Opinions: