Manualios.com

Canon 0433B002 Startup Manual

Canon 0433B002 Manual Online:

4.65, 2454 votes
Canon 0433B002 User Manual
Canon 0433B002 User Guide
Canon 0433B002 Online Manual

Text of Canon 0433B002 User Guide:

  • Canon 0433B002, 66 Regular Maintenance 3 Push the roller lock lever towards the back of the scanner to lock the retard roller in place. 4 Attach the roller cover. Be sure that the upper unit is completely closed by pushing on both edges with both hands until you hear a click.

  • Canon 0433B002, 14 Before Using the Scanner Start Button Press to start document scanning. Stop Button Press to cancel document scanning. (Feed Mode: Panel + Auto) Document Eject Opening Scanned documents are ejected from here. Feed Extension Plate Pull out this plate if documents tend to fall forward. Upper Cover Open when you need to set a document in the scanner. Document Feed Tray Open if the document extends a long way from the Document Feed Opening. Names and Functions of Parts This section explains the name and function of each part. Familiarize yourself with the parts before connecting the scanner. ■ Front/R

  • Using the Scanner 47 4 Set the document in the scanner with the back of the document facing forward and its top edge facing downwards. IMPORTANT The document sheet capacity is 50 sheets of non-curled sheets. Note, however, that the capacity is less when document pages are not being fed correctly. 5 Adjust the Document Guides so they match the width of the document. Note Bef

  • Canon 0433B002, 54 Regular Maintenance Cleaning the Sensor Glass and the Rollers If scanned images have extraneous marks, or if the scanned documents are dirty, then the sensor glass or rollers inside the scanner may be dirty. Clean them periodically. 1 Open the Document Feed Tray. 2 Pressing the OPEN Knob from both sides (q), pull the Front Unit forward to open it (w). 3 Use a blower to keep the interior of the scanner free of dust and paper particles. 4 Use a clean dry cloth to wipe dirt off the sensor glass. Wipe both the top and bottom sensor glasses. CAUTION Do not use spray type cleaners to clean the s

  • 38 Using the Software 4 On the [Scan] menu, click [Select Scanner]. 5 Select [Canon DR-2050C], and then click the [OK] button. Note If [Canon DR-2050C] is not displayed in the list of scanners, reinstall the ISIS/TWAIN driver. (See “Installing the ISIS/TWAIN Driver,” on p. 27.)

  • Troubleshooting 69 Images Are Not Scanned Check the following if the scanner does not scan an image even though the scanning operation is being performed: • Is the scanner correctly connected to the PC? • Has the scanner driver been installed? • Has the application software been installed correctly? Has the application software been set up correctly? �

  • Canon 0433B002, Regular Maintenance 55 5 Rotate the rollers q and w as you clean them. Moisten a cloth with plain water, wring out excess water, wipe the rollers and then dry it with a clean dry cloth. q : Rotate as you wipe. w : Rotate in the direction of the arrows as you wipe. e : (Retard Roller) Remove the roller from the scanner, wipe it clean, and then reinstall it. (See “Removing and Attaching the Retard Roller,” on p. 64.) r : (Feed Roller) Remove the roller from the scanner, wipe it clean, and then reinstall it. (See “Removing and Attaching the Feed Roller,” on p. 60.) 6 Remove the Feed Roller r and Retard Roller e. (See p.60, p. 64.) 7 Wipe the removed rollers with a firmly

  • 6 Before Using the Scanner Normal Handling WARNING To avoid fire and electric shock, always observe the following warnings when using this scanner. • Do not place flammable chemicals, such as alcohol or paint thinner, near the scanner. • Do not cut, damage, or modify the Power Cord. Do not place heavy objects on the Power Cord, do not pull on the Power Cord, and do not bend the Powe

  • Canon 0433B002, Using the Software 39 6 On the [Scan] menu, click [Scanner Setting], and then configure the scanning parameters. Note For details about how to configure scanning parameters, see ISIS/TWAIN driver help. (See p. 36.) 7 Execute the scan operation from the [Scan] menu. Note Details about actually using CapturePerfect can be found in CapturePerfect help. To view information about using CapturePerfect, click [Help] on the menu bar. 8 After scanning is complete, select [Exit] on the [File] menu to quit CapturePerfect.

  • Canon 0433B002, Troubleshooting 67 Troubleshooting This section describes common problems that may occur while you are using the scanner, and how to resolve them. Refer to the troubleshooting section related to the problem that you have encountered. The Scanner Does Not Turn ON ................................................ p. 67. The PC Does Not Recognize the Scanner ................................ p. 68. Scanning Is Slow ........................................................................ p. 68. Images Are Not Scanned............................................................ p. 69. Documents Do Not Feed Properly................................

  • Canon 0433B002, Installing the Software 29 3. Start installation of the ISIS/TWAIN driver. 4. This completes the installation. 6 After installation is complete, click the [Finish] button to exit the installer. Note When the ISIS/TWAIN driver is installed, Canon DR-2050C Help (see “Using the ISIS/TWAIN Driver,” on p. 36.) and the DR-2050C & 2080C Adjustment Tool (see “Adjusting the Scanner,” on p. 72.) icons are registered to the Start menu.

  • Canon 0433B002, Using the Scanner 49 4 Set the document in the scanner with the back of the document facing forward and its top edge facing downwards. The document is scanned as it is detected. IMPORTANT • When scanning documents that are fastened together, such as invoices, set the edge that is fastened together as the leading edge. • After you finish scanning, close the Document Feed Tray and the Upper Cover to prevent damage to the scanner while it is not being used.

  • Canon 0433B002, Installing the Software 27 Installing the ISIS/TWAIN Driver The ISIS/TWAIN driver setup program installs the ISIS/TWAIN driver. Follow the procedure below to install the ISIS/TWAIN driver. 1 Turn ON your PC. Windows starts. IMPORTANT • If you are using Windows 2000 Professional or Windows XP, be sure to log on as a user with administrator privileges. • If another ISIS compatible driver is already installed in your PC, you must back up the files listed below. These files may be overwritten when you install this ISIS/TW

  • Canon 0433B002, Using the Scanner 45 Placing a Document for Scanning There are two methods for paper separation, called the Page Separation mode and Bypass mode for feeding documents. Feeding documents continuously from a stack of documents placed in the feed tray is called the Page Separation mode. Feeding documents one sheet at a time by hand or feeding multiple sheet documents, such as invoices that are attached at one end, is called the Bypass mode. The document feed method can be switched by moving the Feed Selection Lever. IMPORTANT • When placing a document for scanni

  • Canon 0433B002, FCC REGULATIONS (For 120 V model) Document Scanner, Model M11055 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reas

  • Before Using the Scanner 7 • Do not block the ventilation openings. Doing so could cause the scanner to overheat, creating a risk of fire. • Do not place paper clips, staples, necklaces, or any other metallic objects on top of the scanner. Liquids or small metallic objects that get inside of the scanner create a risk of fire or electrical shock. If suc

  • Canon 0433B002, 70 Troubleshooting Paper is not ejected correctly When you are performing page-by-page scanning while a multi-page document is set in the scanner, scanning pauses with the trailing edge of the scanned sheet being engaged by the eject roller. Cause Under these conditions, the scanner enters a standby state and pauses for the next sheet. It does not indicate a paper jam. Remedy To scan the next sheet of the document, manually remove the page that is engaged by the eject roller, or just start the next scan job. For details on how to clear jammed paper, see “Clearin

  • Canon 0433B002, Before Using the Scanner 11 Note • Remove all of the protective tape and protective sheets from the DR-2050C. (See “Removing the protective packing materials,” on p. 12.) • To use the “Feed Roller” install it on the DR-2050C. Refer to “Removing and Attaching the Feed Roller” (see p. 60) for information about installing the roller. • The DR-2050C/2080C Setup Disc is in the Startup Manual (this manual). • The Adjustment Sheet (Shading Sheet) is inserted at the back of this manual. Keep it in a safe place where it will not become lost. •

  • Canon 0433B002, 46 Using the Scanner 2 Adjust the Document Guide to the width of the document being scanned. In the case of an A4 or Letter size document, align the guide with the document positioning mark. IMPORTANT Do not hold the tips of the Document Guide Adaptor when installing it. Doing so can damage the Document Tray. 3 Fan the stack of documents to be scanned, and then angle the stack as shown in the illustration so the top edge of the first page is the lowest. (Set the document in the scanner with the top edge of the document facing downwards.)

  • 8 Before Using the Scanner Features of the DR-2050C The main features of the DR-2050C scanner are listed below. ■ Compact Configuration The scanner has a very compact configuration, measuring only 11.7" (298 mm) (W) x 7.7" (197 mm) (H) x 3.9" (100 mm) (D). The small footprint of this standup vertical scanner saves space. ■ Fast Document Feeding The scanner can scan a maxim

  • Canon 0433B002, 42 Using the Scanner Using the Scanner Documents This scanner can scan documents ranging in size from business cards and checks to LTR/A4 size documents. The size of documents that can be scanned is shown below. Eject Direction Page Separation mode Bypass mode Width 2.16" to 8.5" 2.16" to 8.5" (55 mm to 216 mm) (55 mm to 216 mm) Length 2.75" to 11.6" 2.75" to 13.9" (70mm to 297 mm) (70 mm to 355 mm) Weight 14 to 32 lb bond 11 to 40 lb bond (52 to 128g/m 2 )(42 to 157g/m 2

  • Canon 0433B002, Installing the Scanner 21 Computer DR-2050C USB Cable Connecting the Scanner to Your PC Connecting the scanner to a computer using a USB connection. IMPORTANT • When the application is running, do not turn the scanner OFF or unplug the interface cable. • Do not connect multiple DR-2050C scanners to one (1) computer. USB Interface Connection • Be sure to use the USB cable bundled with the scanner or a Hi-Speed USB 2.0 compatible cable. • When using a USB extension card that supports Hi-Speed USB 2.0, be sure to choose one verified for use with the scanner. (See p. 19.) IMPORTANT When using a USB hub, be sure to use one compatible

  • Canon 0433B002, 30 Installing the Software Installing CapturePerfect CapturePerfect is ISIS compatible application software. You need to install the ISIS/TWAIN driver before installing CapturePerfect. Follow the procedure below to install CompturePerfect. 1 Turn ON your PC. Windows starts. IMPORTANT If you are using Windows 2000 Professional or Windows XP, be sure to log on as a user with administrator privileges. 2 Insert the setup disc in the PC’s CD-ROM drive. 3 Click the [Start] button, and then select [Run]. The [Run] dialog box appears. 4 In the Open box, enter “D:\CapturePerfect\Setup.exe” (assuming that “D” is the letter assigned to your CD-ROM drive), and then cl

  • Canon 0433B002, Before Using the Scanner 15 ■ Back/Left Side Power Connector Connect the bundled AC adaptor. Kensington Slot Used for anti-theft measures. Theft can be prevented by attaching a chain, etc. USB Connector Connect the USB cable provided or one that supports Hi-Speed USB 2.0. Power Switch Turns the scanner on and off. Mark indicating page-by-page feeding of document (Page Separation mode). ■ Conventions Mark indicating feeding of document without separation (Bypass mode). Marks indicating multi-page document alignment. CAUTION Make sure that Ventilation Openings are not blocked.

  • Canon 0433B002, Regular Maintenance 57 Removing and Attaching the Rollers Follow the relevant procedure to remove and attach the feed roller and retard roller when you clean or replace them. IMPORTANT Feed rollers are consumable parts. When the rollers start to wear out, paper jams and misfeeds may occur more often. When this happens, buy an exchange roller kit, and replace the feed roller and the retard roller. CAUTION Do not use excessive force when removing or attaching the rollers. Doing so may damage them. Roller Replacement Cycle When the number of pages scanned exceeds 30,000, a roller replacement message will appear when the computer is started. Buy an exchange roller kit, and replace the fe

  • Canon 0433B002, 20 Installing the Scanner Connecting the Power Cord Perform the following steps to connect the Power Cord. WARNING • Be sure to use the Power Cord and AC adaptor provided with the scanner. • Be sure the scanner is turned OFF when performing this operation. 1 Connect the bundled Power Cord q to the AC adaptor. 2 Plug the AC adaptor Power Cord into the power connector (w) on the left side of the scanner, and plug the power plug into a power outlet (e).

  • Canon 0433B002, 10 Before Using the Scanner Power Cord Startup Manual (This Manual) AC Adapter DR-2050C/2080C Setup Disc (CD-ROM) USB Interface Cable Adobe Acrobat Setup Disc (CD-ROM) DR-2050C Scanner Document Guide Adapter S t a r t u p M a n u a l Please read this manual before operating this unit. After you finish reading this manual, store it in a safe place for future reference. D o c u m e n t S c a n n e r Warranty Card (U.S.A. and Canada only) Adjustment Sheet (Shading Sheet) Feed Roller Checking the Packing List The contents of the carton in which this scanner is shipped are described below. If anything is missing

More Instructions:

DOWNLOAD

Related Products and Documents (Scanner):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sony KV-36FS12 - 36" Trinitron Wega Dimensions sony/kv-36fs12-36-trinitron-wega-D91.pdf 06 Mar 2024 1
2 John Bowers Active I Instruction manual john-bowers/active-i-74Y.pdf 03 May 2023 16
3 Farfisa TK 628 Operation & user’s manual farfisa/tk-628-PHX.pdf 02 Jul 2022 20
4 Pulsar AWO530 Installation instructions pulsar/awo530-7G4.pdf 22 Aug 2023 4
5 Viqua S2Q-PA Owner's manual viqua/s2q-pa-1T5.pdf 02 Oct 2023 24
6 Arctiko MUF 40 Operating instructions manual arctiko/muf-40-54V.pdf 19 Sep 2023 24

Similar Resources:

  • Epson

    Stylus NX230

    (12 pages)
    NoticesImportant Safety InstructionsBefore using your Epson® product, read and follow these safety instructions:■Be sure to follow all warnings and instructions marked on the product.■Use only the type of power source indicated on the product’s label.■Use only the power cord that comes with the product. Use of another cord may cause fires or shock. …
  • Epson

    ProofPlus TM-H6000III

    (60 pages)
    EnglishUser’s Manual. . . . . . . . . . . . . . . . . . . . 1Bedienungsanleitung . . . . . . . . . . . . . . . 9Gebruikershandleiding . . . . . . . . . . . . . 15Manuel d’utilisation . . . . . . . . . . . . . . . 21Manual do utilizador . . . . . . . . . . . . . . . 27Manual …
  • Molecular Devices

    NanoScan SP Series

    (6 pages)
    www.prior.com QUICK START GUIDE USE OF METAMORPH WITH THE NANOSCAN SP RANGE OF SAMPLE SCANNERS AND THE NANOSCAN OP OBJECTIVE POSITIONER The NanoScan SP series sample scanners and the NanoScan OP400 objective positioner have basic control within Metamorph using the NanoScan Z functionality. CONNECTING YOUR SYSTEM - FRONT OF UNITPOS MON connector analogue po …
  • Honeywell

    4800p

    (2 pages)
    4800pThe 4800p is a compact solution that delivers high performance barcode scanning, plus the added versatility of digital image capture. The 4800p’s unique form factor makes it ideal for installation where space is limited and continuous scan mode enables a user to easily scan items by simply placing them in front of the scanner -- no need to press a tri …
  • Epson

    Perfection V600 PHOTO

    (2 pages)
    EPSON PERFECTION V600 PHOTOEPSON PERFECTIONV600 PHOTORemove dust and scratches with this versatile, 6400 dpi scanner, featuring advanced DIGITAL ICE™ technologies for both fi lm and photos.Scan all your prints, negatives and slides quickly and effi ciently. Complete with fi lm holders it handles just about any size and format, including 35 mm fi lmstri …
  • Canon

    K10294

    (12 pages)
    The socket-outlet shall be installed near the equipment and shall be easily accessible.Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.As an ENERGY STAR® Partner, Canon Inc. has determined that this model meets the ENERGY STAR® Program for energy efficiency.The International ENE …

Comments, Questions and Opinions: