Acoustic Research AW-D510 Owner's Manual

Text of Acoustic Research AW-D510 User Guide:

• Important Information WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION Caution: To reduce the risk of electric shock, do not remove cover

• Acoustic Research AW-D510, 1 True 5.1 surround sound, with 3-speaker design in each cup 2.4GHz Digital technology lets you enjoy crystal clear audio wirelessly up to 60 feet away from the transmitter, with no line-of-sight limitations* Convenient power, volume and tuning controls located on headphones 8 selectable transmission channels for optimized reception *Range may vary according to environment. Congratulations on your purchase of the 2.4GHz Wireless HD Headphones with True 5.1 Surround Sound. The AWD510 uses the latest in wireless transmission, 2.4GHz digital technology, that lets you enjoy cry

• Acoustic Research AW-D510, 2 Supplied Accessories This headphone system includes accessories that enable you to use your wireless headphone set in a number of ways. Charging the Headset Before using your headphones for the rst time, charge them for 3.5 hours using the supplied AC power adapter. 1. Power the transmitter. Connect the AC power adapter to the DC IN power supply jack on the transmitter's back panel. Plug the adapter into an electrical outlet. Important: This power unit is intended to be correctly oriented in a vertical or oor mount position. Getting Started Digital co

• Acoustic Research AW-D510, 3 2. Charge the headset. Unhook the charging cable on the transmitter’s back panel. Transmitter (back panel) OPTICALCOAXIALDC IN LINE INOPTICALCOAXIALDC IN LINE IN Charging cable hook Plug the end of the charging cable into the recharging jack on the right headphone. While the headphones are charging, the LED on the left headphone remains red. This LED turns off when the headphones are fully charged. Note: To get the most from your headphones’ battery, make sure you let the headphones charge completely before you

• Acoustic Research AW-D510, 4 Volume up/down buttons increase or decrease the headphone volume Left headphone (side view) LED indicates charging (red) and communication with transmitter (blue) Power button turns the headphones on and off Headphone Buttons & Indicators 1. Connect one end of the 3.5mm stereo cable to the LINE IN jack on the transmitter’s back panel. 2. Connect the other end of the 3.5mm stereo cable to the headphone jack on your MP3 or CD player. —OR— Connect the other end of the 3.5mm stereo cable to the Y adapter cable. Connect the red and white plugs of the Y adapter cable to the audio

• Acoustic Research AW-D510, 5 Transmitter (top panel) Transmitter Jacks & Controls OPTICALCOAXIALDC IN LINE INOPTICALCOAXIALDC IN LINE IN Transmitter (back panel) LINE IN jack connects to an analog audio source OPTICAL jack connects to a digital optical source COAXIAL jack connects to a digital coaxial source Charging cable connects to the headphones’ recharging jack Antenna DC IN jack connects to the AC power adapter Power button turns the transmitter on and off Input select button cycles through the input jacks Channel select/link button cycles through the tr

• Acoustic Research AW-D510, 6 1. Press the power button on the transmitter’s top panel to turn the transmitter on. Note: Make sure the right input is selected—if it isn’t, press the input select button repeatedly until the LED above the correct input is lit. 2. Press the power button on the right headphone to turn the headphones on. 3. Switch on the audio source (TV, DVD, CD player, etc.) to which the transmitter is connected. If your audio source is a DVD or CD player, start a disc. 4. The headphones and transmitter should automatically lock onto each other for wire

• Acoustic Research AW-D510, 7 If you’re using the LINE IN input... If possible, use a xed-level (or line-level) audio output from your audio source. This kind of output provides a consistent level of audio that doesn’t change when you adjust the source’s volume control. Fixed-level audio outputs from stereo receivers/amps are typically designated as tape or VCR audio output connections, sometimes marked on the component as ‘TAPE OUTPUT,’ ‘TAPE OUT,’ ‘TAPE REC, or ‘TAPE RECORD or REC OUT.’ Fixed-level outputs from TVs are usually marked as ‘Cons

• Acoustic Research AW-D510, 8 The following troubleshooting guide takes you through some of the more common problems associated with the installation and/or operation of a wireless system. If the problem persists, please call toll-free 1-800-732-6866 or visit www.araccessories.com. Issue: Cause and solution: No sound • Make sure the transmitter’s AC power adapter is fully inserted into the wall outlet and the power cord from the AC adapter is rmly connected to the transmitter power input jack. • Check that the audio source component (DVD player, TV, etc.)

• 9 Specifications Transmitter Omni-directional 2.4GHz digital broadcast Dolby Digital 5.1 Surround Sound decoding Effective transmitting range: up to 60ft. (18m)* Audio inputs: Digital optical, digital coaxial, and 3.5mm stereo jack 8 selectable transmission channels HD Headphones Patented three-speaker design in each earcup: 40mm Neodymium drivers for front left/right

• Acoustic Research AW-D510, © 2007 Audiovox Accessories Corporation 111 Congressional Blvd., Suite 350 Carmel, IN 46032 USA www.araccessories.com AWD510_US_IB_00 Trademark(s) Registered All other brands and product names are trademarks or registered trademarks of their respective owners.

Related Products and Documents (Headphone):

Comparable Devices:

Similar Resources:

• Remixd ETRTWB (2 pages) TRULY WIRELESS EARBUDSUSB to Micro USB Charging CablePairing Quick Start GuideYour truly wireless earbuds come pre-paired together and should pair to your phone like any other Bluetooth device once both earbuds are powered on. It is suggested you hold the earbuds close to your ears to hear the voice prompts.1. Remove both earbuds from the case and hold dow …

• Sennheiser HME 100 SE (1 pages) HME 100 SEHeadsets | Pilot´s HeadsetGeneral DescriptionFeaturing an elegant high-tech finish, closed ear protector headphones and excellent passive noise attenuation, the HME 100 Special Edition pilot‘s headset is ideal for use in propeller and turbo-prop aircraft. Features Special edition headset Constant attenuation of up to 40 dB Advanced transduce …

• Avantree BTHS-136 (8 pages) User ManualProduct overview Included accessoriesHow to chargeBasic operationsLED Indications How to pairHow to Factory ResetSupport FAQ How to take care of your HS136 1122347777·····················································································� …

• Jabra GN5010 (2 pages) www.gnnetcom.co.ukHi- stereo headsets for optimal audioTake your pick from 4 hi- stereo headsets – designed so you can get the most out of your PC audio experience. Ideal for voice and video chat, IP telephony, interactive training, and even gaming or music – in fact for just about anything you might want to listen to either from your PC or MAC. Av …

• Jabra Evolve 65e (41 pages) GET STARTED EVOLVE 65eNEED HELP FOR YOU PRODUCT?OTHER INQUIRIESVisit Jabra.com/help/evolve65eJabra.com/contactKostenlose Musik für KonzentrationMusique de concentration gratuiteMúsica gratuita para concentrarse Musique pour concentration gratuiteMúsica de concentração grátis 集中することをサポート Jabra.com/productivity 81-04423 EFREE CONC …

• Kingsun 055A (8 pages) 1Bluetooth Earphone055AINSTRUCTION MANUALPLEASE READ ALL INSTRUCTIONS CAREFULLYAND RETAIN FOR FUTURE USEGetting Started Remove the product from the box. Please retain all packaging after you have checked and counted all the parts and thecontents agains t the Package Contents list.Package Contents Passive Noise‐Cancellation Stereo Earpods with Mic� …

Comments, Questions and Opinions: