ActionTec MWTV200T Operation & User’s Manual
|
ActionTec MWTV200T, USB: 1 USB Type A (Receiver); 1 USB Mini (Transmitter) Power: 5V 3A Weight: 0.30 lb. (per device) Dimension: 4.125 in. W x 1.25 in. H x 4.75 in. D Regulatory Compliance: FCC Class B & C, UL, IC Operating temperature: 0º to 40º C Color: Glossy black LED Indicators Transmitter Sync, Power, Wireless Receiver Sync, Power, Wireless GPL License To see the GPL License, go to the following link: http://opensource.actiontec.com/ MyWirelessTV User Manual 33
ActionTec MWTV200T, • HDCP compliant † - secured video content protection with standard HDCP 2.0 encryption • HDMI compliant † - complies with HDMI™ industry standard to assure device compatibility • Soware support - obtain newer soware online to enhance product Product Contents • Wireless HD video Transmitter • Wireless HD video Receiver • Power adapter • High-speed HDMI cables • Remote control • IR Blaster cable • IR Receiver cable • USB mini adapter • Quick start guide MyWirelessTV User Manual 5 † Certication pending.
Graphical User Interface To access MyWirelessTV’s graphical user interface, press the Menu button the remote control. e Main Menu appears: MyWirelessTV’s Graphical User Interface is organized in four categories, which are represented by the four icons in the Main Menu: Select Source, Congure, General Settings, and Advanced Settings. MyWirelessTV User
ActionTec MWTV200T, Setting Up IR Control MyWirelessTV comes with an IR Blaster and IR Receiver, which work together to allow you to control the source device from the location you are watching, whether it’s in the next room or on the other side of the house. For example, if your Blu-ray player is in the living room, and you’ve set up MyWirelessTV to watch on an HDTV in the bedroom, the IR Blaster/Receiver allows you to control the Blu-ray player from your bedroom. Note: If you are using MyWirelessTV in the same location (i.e., th
ActionTec MWTV200T, Getting To Know MyWirelessTV is section contains a quick overview of MyWirelessTV, including all ports and LEDS on both the MyWirelessTV Transmitter and Receiver. MyWirelessTV Transmitter e MyWirelessTV Transmitter features ve ports (Power, HDMI Input, IR Transmit, HDMI Passthrough, and mini USB), two buttons (Sync, Reset), and three LEDS (Sync, Power, Wireless). Transmitter Front Panel Wireless LED e Wireless LED, located on the front of the Transmitter, is used to display the state of the Transmitter’s wireless signal. If unlit, the wireless radio is not on. If lit, the wireless radio is on. MyWirelessTV Us
ActionTec MWTV200T, Buttons To navigate the GUI screens, you must use several of the buttons on the remote control. Following is a list of the buttons needed to navigate the GUI. Select Source Shortcut Pressing this button displays the possible source devices available, and allows you select one (by pressing the Up and Down buttons on the remote control to navigate, and selecting one by pressing the OK button). Menu Pressing this button generates the Main Menu screen. If you are already in the Main Menu screen, pressing the Menu button again returns you to the video screen. Direction (Up, Down, Le
ActionTec MWTV200T, 3. Place the at end of the IR Blaster cable in front of the remote sensor of the source device. You should now be able to use the remote control of the source device from the location of the HDTV monitor to which you are streaming content. Typical MyWirelessTV Connection Conguration Transmitter MyWirelessTV User Manual 14
Receiver Connecting to a Computer as a Source Device If you want to use a computer with an HDMI out port with MyWirelessTV, connect the computer as you would any other HDMI device (see “Connecting MyWirelessTV Transmitter” and “Connecting MyWirelessTV Receiver,” above). You can then use MyWirelessTV’s USB Backchannel feature (see next page) to operate
ActionTec MWTV200T, General Settings Selecting General Settings from the Main Menu screen (by navigating to the appropriate icon and the pressing OK on the remote control) generates the General Settings screen: ere are three options in this screen: Language, Latency Mode, and Wireless Channel. Language Selecting Language in the General Settings screen generates a list of languages for the MyWirelessTV GUI in the right-hand pane. Currently, only English is available. MyWirelessTV User Manual 24
ActionTec MWTV200T, Troubleshooting is chapter will describe some problems you may encounter using MyWirelessTV, and the possible solutions to those problems. Also included are frequently asked questions, and the answers the questions. Frequently Asked Questions Why can’t I see anything on the TV next to the Transmitter? Check the cable connection from the external source (i.e., cable/ satellite set top box, Blu-ray player) to the Transmitter and from the Transmitter out to the HDTV. Why can’t I see anything on the TV, even though all the cables are conne
ActionTec MWTV200T, 7. Plug the other end of this HDMI cable to an HDMI port on the source device. is cable should now connect the Transmitter to the source device. 8. Turn on the HDTV and make sure you can see video from your source device. Connecting the MyWirelessTV Receiver e Receiver must be installed near the HDTV monitor where you intend to watch the content being streamed from the source device. 1. Get the second power supply from the MyWirelessTV kit and plug the smaller end into the 5VDC (Power) port on the back of the Receiver. 2. Plug t
ActionTec MWTV200T, 4. Watch the Power and Sync LEDs of the device ash for 2-3 minutes. Do not power down the device or remove the USB thumb drive while the LEDs are ashing. 5. Aer the LEDs turn o briey, the Power LED will ash, then glow solid green. When this occurs, remove the thumb drive from the MyWirelessTV device. 6. Repeat steps 3-5 for all MyWirelessTV devices that need an update. Once the rmware update has been applied to all MyWirelessTV devices, perform a power cycle (turn o, then on) on all devices. e MyWirelessTV devices will pair automatically, streaming audio and video. Perform another power cycle on all devices. e rmware update has been successfully ap
ActionTec MWTV200T, Specications is chapter lists the specications of the MyWirelessTV devices. General Video Specications Multisource: Multiple Transmitters ‡ to 1 Receiver Multicast: 1 Transmitter to multiple Receivers § (up to 4) Range: Up to 150 . Resolution: 480i, 480p, 720p, 1080i, and 1080p End-to-end latency: < 20ms Average Bitrate: 35Mbps Input: 1 HDMI (Transmitter) Output: 1 HDMI Wireless (Receiver), 1 HDMI Pass-through (Transmitter) Technical Specications Wireless: 802.11n Security: Standard WiFi security Bandwid
ActionTec MWTV200T, Using the MyWirelessTV Graphical User Interface is chapter describes using the MyWirelessTV graphical user interface, which allows you to congure various aspects of MyWirelessTV, including changing the source device, adjusting latency, and resetting the devices. Remote Control e remote control that comes with MyWirelessTV is used to access the device’s graphical user interface (GUI). e GUI appears on the HDTV monitor connected to the Receiver. ere is no access to a GUI on the monitor connected to the Transmitter.
ActionTec MWTV200T, Connecting MyWirelessTV Connecting MyWirelessTV consists of two parts: connecting the Transmitter to a source of high-denition video, and connecting the receiver to a high-denition television monitor. is chapter will take you through both procedures, as well as setting up the IR Blaster and IR Receiver to allow you to use the remote control of the source device in the location you are watching (or playing) your content. Connecting the MyWirelessTV Transmitter 1. e Transmitter must be installed near the video’s source device (set top box, Blu-ray player, gaming console, etc.) 2. Get one of the power supplies from the MyWirelessTV kit and plug the small end of the
ActionTec MWTV200T, Table of Contents Introduction 3 Minimum System Requirements 3 Features 4 Product Contents 5 Getting To Know MyWirelessTV 6 Connecting MyWirelessTV 11 Connecting the MyWirelessTV Transmitter 11 Connecting the MyWirelessTV Receiver 12 Setting Up IR Control 13 Typical MyWirelessTV Connection Conguration 14 Connecting to a Computer as a Source Device 15 Using USB Backchannel 16 Using the MyWirelessTV Graphical User Interface 17 Remote Control 17 Graphical User Interface 20 Updating MyWirelessTV Firmware 27
ActionTec MWTV200T, Congure Selecting Congure from the Main Menu screen (by navigating to the appropriate icon and the pressing OK on the remote control) generates the Congure screen: ere are four options in this screen: Add Transmitter, Label Transmitter, Delete Transmitter, and Label Receiver. Add Transmitter Selecting Add Transmitter in the Congure screen causes the Receiver to scan for additional Transmitters within its range, then add the device to its Source list. Once the Receiver completes its scan, a list of possible Transmitters appears in the right-hand pane of the screen. Select one,
ActionTec MWTV200T, Using USB Backchannel 1. Aer connecting the computer to the Transmitter, and an HD monitor to the Receiver, get the mini USB connector from the kit and plug it into the mini USB port on the Transmitter. 2. Get a USB cable (not included in kit) and connect it to the mini USB connector plugged into the Transmitter, and a USB port on the computer. 3. Plug your keyboard/mouse into the USB port on the Receiver. You should now be able to control your computer remotely. MyWirelessTV User Manual 16
Reset to Factory Selecting Reset to Factory in the Advanced Settings screen generates a window on the screen, asking the following: Are you sure you want to reset to factory defaults? If you reset MyWirelessTV to factory default settings, all saved pairing information will be lost (except the original pairing information). Select Reset to have MyWirelessTV go through
ActionTec MWTV200T, Power LED e Power LED, located on the front of the Receiver, is used to display the state of the Receiver’s power. If unlit, the unit is o. If lit, the unit is on. USB Port e USB port, located on the front of the Receiver, is used to connect a USB stick drive to the Receiver when a rmware update is available. See “Updating MyWirelessTV’s Firmware” for more details. It is also used for the USB Backchannel feature. Receiver Rear Panel Reset Button e Reset button, located on the back of the Receiver, is used to reset th
ActionTec MWTV200T, Label Transmitter Selecting Label Transmitter generates a list of names in the right-hand pane with which you can label the currently streaming source device, such as DVR, Blu-ray player, etc. At the bottom of the list is a Custom option. Selecting this option generates a graphical keyboard with which you can create a custom label for this source device by entering the name of your choice. Delete Transmitter Selecting Delete Transmitter in the Congure screen allows you to delete added Transmitters. Once the Receiver completes its scan, a list of Transmitters appears
ActionTec MWTV200T, Sync LED e Sync LED, located on the front of the Transmitter, is used to display the state of synchronization between the Transmitter and Receiver(s). If it is blinking or o, the Transmitter is not synchronized with any Receivers. If it is glowing steadily, synchronization has been established with at least one Receiver. Sync Button e Sync button, located on the front of the Transmitter, is used set up synchronization with a Receiver or Receivers. Power LED e Power LED, located on the front of the Transmitter, is used to display the state of the Transmitter’s power. If unlit, the unit is o. If lit, the unit is on. Mini USB Port e Mini USB port, located
ActionTec MWTV200T, MyWirelessTV Receiver e MyWirelessTV Receiver features three ports (Power, HDMI Out, USB), two buttons (Sync, Reset), and three LEDs (Wireless, Sync, Power). Receiver Front Panel Wireless LED e Wireless LED, located on the front of the Receiver, is used to display the state of the Receiver’s wireless signal. If unlit, the wireless radio is not on. If lit, the wireless radio is on. Sync LED e Sync LED, located on the front of the Receiver, is used to display the state of synchronization between the Receivers and Transmitter. If it is blin
Select Source Selecting Select Source from the Main Menu screen (by navigating to the appropriate icon and the pressing OK on the remote control) generates the Select Source screen: is screen overlays the video stream being transmitted to your HDTV monitor and allows you to select another source of video streaming, assuming you have congured multiple MyWirelessTV Tra
DOWNLOAD |
Akai PT50DL24 TV Owner's instructions manual
PT50DL24 |
Pace RNG110 TV Quick start quide
RNG110 |
Samsung 6+ series TV Operation & user’s manual
6+ series |
Palsonic TFTV5545LEDR TV Instruction manual
TFTV5545LEDR |
ActionTec WirelessTV TV Quick start manual
WirelessTV |
Pacific PTV3606 TV Service manual
PTV3606 |
ActionTec WirelessTV TV Quick start manual
WirelessTV |
Sony Trinitron KV-2199XDK TV Service manual
Trinitron KV-2199XDK |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | RCA | RP-7983 | Operation & user’s manual | rca/rp-7983-V1Z.pdf | 16 Feb 2023 | 18 | 0.23 Mb |
2 | Xerox | 2006NPC - DocuColor Color Laser | Maintenance manual | xerox/2006npc-docucolor-color-laser-K8B.pdf | 24 Jan 2023 | 18 | 1.01 Mb |
3 | KitchenAid | KUDU03FTBL3 | Parts list | kitchenaid/kudu03ftbl3-6FE.pdf | 19 Jul 2023 | 16 | |
4 | Toshiba | FT-6305 | Owner's manual | toshiba/ft-6305-P1D.pdf | 16 Dec 2023 | 28 | 1.89 Mb |
5 | Kodak | i4000 Plus Series | Operation & user’s manual | kodak/i4000-plus-series-NYH.pdf | 25 Oct 2022 | 60 | |
6 | Hoover | SteamVac F6026910 | Owner's manual | hoover/steamvac-f6026910-VPC.pdf | 25 Nov 2022 | 15 | 1.17 Mb |
Symphonic
COLOR TV/VCRSC313C(13 inch)SC319C (19 inch)OWNER’SMANUALAs an ENERGY STAR Partner, our company has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.®®®If you need additional assistance for set-up or operating after reading owner’s manual, please callTOLL FREE : 1-800-242- …
SC319C(32 pages) |
Gateway
www.gateway.comGateway 23-inch LCD TV SpecificationsSpecifications are subject to change without notice or obligation.Display PanelScreen size Diagonal 23-inchAspect ratio 16:9 wideNumber of pixels 1280 (Horizontal, RGB Trio) × 768 (Vertical) pixelsPixel pitch 0.3915 × 0.3915 mmLuminance 450 cd/m2, at APL13% typicalContrast ratio 500:1 typicalResponse time …
23-inch(6 pages) |
LG
26LH1DC1Please read this manual carefully before operatingyour set.Retain it for future reference.Record model number and serial number of the set.See the label attached on the back cover and quotethis information to your dealer when you requireservice.
…
26LH1DC1(84 pages) |
Samsung
LED TVuser manualimagine the possibilitiesThank you for purchasing this Samsung product. To receive more complete service, please register your product atwww.samsung.com/registerModel _____________ Serial No. _____________
…
UN32C5000QF(52 pages) |
Daewoo
S/M No. : CM003P-010MUTEPOWERCHCHVOLVOLDISPLAY INPUT VIDEOSLEEP PREVIOUS1 2 34 5 67 809DTH-14V3FCDTH-20V4FCR-38T01DTH-14V1FCService ManualColor TelevisionCHASSIS : CM-003Sep. 1999DAEWOO ELECTRONICS CO., LTDhttp : //svc.dwe.co.krModel : DTH-14V1FSDTH-20V1FSDTH-21V1FSDTH-14V3FSDTH-20V3FSDTH-21V3FSDTH-14V4FSDTH-20V4FSDTH-21V4FS …
DTH-14V1FS(48 pages) |
LG
• ATSC/NTSC/QAM Clear Tuners• Digital Cable Ready (CableCARD™)• TV Guide On Screen®• 9-in-2 Multi Memory Card Slot • Texas Instruments HD3 DLP™ Chip• HDMI with HDCP• IEEE 1394 with DTV Link• 1500:1 Contrast Ratio• 1280 x 720p ResolutionLG’s Exclusive XD™ Engine Six distinct processes contribute to picture improvement. LG� …
62SX4D - - 62" Rear Projection TV(2 pages) |
Air Live Wireless Access Point WMM-3000APAir Live WMM-3000AP Manual (Doc Type: Wireless Access Point Quick setup manual) WMM-3000AP, 51 |
AEG Battery Charger LL10.0Battery Charger PDF User manual manual LL10.0, 112 |
LG LCD TV 47LG50-UG#S99O3I 47LG50-UG: LG LCD TV Owner Documentation 47LG50-UG, 114 |
Frigidaire Refrigerator FRT21KG3EFRT21KG3E (Refrigerator ePDF User Guide, #699TUW) FRT21KG3E, 11 |
Maytag Washer LAT9206Guide: Maytag LAT9206 (FG2EE9, Upd.02/02/2024) LAT9206, 11 |
Kompernass Saw PKGS1450Saw PDF Operating and safety instructions manual PKGS1450, 14 |
Philips Blender HR2870Philips Blender HR2870 Manual HR2870, 184 |
Nikon Adapter EH-62BNikon EH-62B Manual (Doc Type: Adapter Instruction manual) EH-62B, 2 |
TRI-M ENGINEERING Enclosure CT104#VTIHMZ CT104: TRI-M ENGINEERING Enclosure Owner Documentation CT104, 8 |
Little Doctor Blood Pressure Monitor LD51PDF Manual (@36UZBH), Little Doctor LD51 Blood Pressure Monitor (04.12.2023) LD51, 32 |
Thule Bicycle Accessories RideAlongBicycle Accessories PDF Product overview RideAlong, 32 |
Whirlpool Cooktop RM973PXLWhirlpool Cooktop Use & care manual (File: whirlpool-rm973pxl-cooktop-28, Tue 10.2023) RM973PXL, 28 |