ADDER ADDERVIEW CATx 1000 Operation & User’s Manual

Text of ADDER ADDERVIEW CATx 1000 User Guide:

• ADDER ADDERVIEW CATx 1000,       18 Configuration Almost all configuration and operational aspects of the AdderView CATx 1000 units are controlled via on-screen menu displays. Overall initial configuration When setting up a new installation, the following stages are recommended: 1 Enable the general ‘Security’ option. With security disabled (default setting), a local or remote user attached to the AdderView CATx 1000 will have full and unrestricted access to all computers and all AdderView CATx 1000 settings. In larger installations

• ADDER ADDERVIEW CATx 1000,       20 Configuration menus layout The menu options are arranged as shown here: For a description of each option within the Configuration menus, see Appendix 1 for more details. Configuration Menu Functions (F1) Advanced Options User Preferences Global Preferences Setup Options Edit Computer List Edit User List Edit Autoscan List Restore Standard Mous

• ADDER ADDERVIEW CATx 1000,       46 Advanced Options Advanced options are available only to the Admin user and consist of settings that are related to specialist areas such as power control and DDC. ADDERVIEW CATx 1000 Advanced Options DDC Options Power Control USB Country Code Enter-Select F1-More menus Esc-Quit FirmwareVersion 1.01b06 DDC Options The options within this section are related to the Display Data Channel features supported by the AdderView CATx 1000. DDC is an ind

• ADDER ADDERVIEW CATx 1000,       19 ADDERVIEW CATx 1000 Computer Port Computer 1 01 Computer 2 02 Computer 3 03 Computer 4 04 Computer 5 05 Computer 6 06 Computer 7 07 Computer 8 08 User Status ADMIN SHARED USE F1-More menus F3-Find Esc-Quit F4-Logout Configuration menus The configuration menus allow you to determine many aspects of the AdderView CATx 1000 capabilities. From here you can: • Create individual user accounts and determine access rights, •

• ADDER ADDERVIEW CATx 1000,       40 Appendix 1 – Configuration menus The AdderView CATx 1000 configuration menus allow a range of settings to be made both to the installation as a whole and to parts of the system accessed by each user. To access the configuration menus 1 Select the on-screen main menu in one of two ways: • By simultaneously pressing and then releasing , or • By pressing the middle and right buttons of a three button mouse. If you are not already logged in, do so now. What to do if

• ADDER ADDERVIEW CATx 1000,       29 What to do if the ADMIN password has been forgotten If the ADMIN password becomes mislaid or forgotten, you will not be able to access the AdderView CATx 1000 to add or edit users and computer names. This situation may be resolved by performing a complete reset to return the AdderView CATx 1000. IMPORTANT: A complete reset erases all the user names and computer names that you have setup. To clear a passw

• ADDER ADDERVIEW CATx 1000,       44 Global Preferences (continued) OSD Dwell Time Settings: 1, 2, 3, 5, 10 SECONDS After a successful computer channel change the AdderView CATx 1000 will display a confirmation message for a few seconds. The length of time that this confirmation message dwells on the screen may be changed. User Timeout Settings: 1, 2, 5, 10, 30 SECONDS, 1, 5, 10 MINUTES When

• ADDER ADDERVIEW CATx 1000,       27 Saving and restoring configuration settings The AdderView CATx 1000 can store up to 256 computer names and 5 sets of user access rights in addition to the ADMIN user account. Particularly in cascaded configurations, manually re-entering all computer names, port numbers and access rights can be a lengthy process. There

• ADDER ADDERVIEW CATx 1000,       30 Power switching configuration Power switch configuration comprises two main steps: • Configure the POWER CONTROL serial port to the same speed as used by the power switch box(es) via the configuration menu. • Configure power ON and OFF strings for each relevant host computer. For each power port there needs to be a valid ‘Power ON string’ and similarly an appropriate ‘Power OFF string’.

•       37 The reminder banner As many computer screen layouts can appear very similar, the AdderView CATx 1000 provides a reminder banner option that indicates which computer port you are currently viewing. The ban

• ADDER ADDERVIEW CATx 1000,       24 To apply remote user video compensation 1 On the remote user keyboard (connected to an Adder X100/X200 extender), simultaneously, press the hotkeys (by default, and ) along with to enter configuration mode. The three keyboard indicators (‘Num Lock’, ‘Caps Lock’ and ‘Scroll Lock’) will now begin to flash in sequence. The speed of the sequence indicat

• ADDER ADDERVIEW CATx 1000,       1 Contents Introduction AdderView CATx 1000 features - front and rear .......................4 What’s in the box.........................................................................5 What you may additionally need ...............................................5 Installation Mounting ...................................................................................

•       15 The unique address of this host is: 1203 08 CAMCAMCAMCAM CAMCAMCAMCAM AdderView CATx 1000 AdderView CATx 1000 The unique address of this host is: 1203 Port 12 at cascade level 1 Addressing computers in

• ADDER ADDERVIEW CATx 1000,       3 Power switch X100 X200 CAM CAM CAM CAM CAM CAM } LOC REM OSD UPG LCK PWR www.adder.com KVM only Introduction Thank you for choosing the AdderView CATx 1000 from Adder Technology. This compact unit has been created to allow a single operator to take full control of many computer systems. Like the other models within the highly successful AdderView CATx family, this unit takes full advantage of category 5, 5e or 6 structured cabling to provide flexible installation a

• ADDER ADDERVIEW CATx 1000,       31 Performing upgrades The AdderView CATx 1000 units are fully upgradeable via flash upgrades, as are the individual Computer Access Modules that are used to link all host computers. Such upgrades require a Windows-based computer system to be linked via the OPTIONS port. Upgrading AdderView CATx 1000 units and CAMs The KVM Firmware Uploader utility is available from the Adder Technology website (w

• ADDER ADDERVIEW CATx 1000,       23 Video compensation The AdderView CATx 1000 units allow a remote user to be extended by a maximum of 300m (980 feet). Such long cable lengths can affect video signals, especially when higher screen resolutions are used. In order to eliminate any video signal degradation, all Adder X100 and X200 extenders provide effective software-based video compensation features. Remote user video compensation Video compensation for each remote user i

• ADDER ADDERVIEW CATx 1000,       35 To select a computer using mouse buttons Note: This procedure works only with three-button or IntelliMouse devices and only if the ‘Mouse Switching’ option has been enabled by your administrator. 1 Hold down the middle button (or scroll wheel) of the mouse. 2 Click the left mouse button to select the next computer port. When the correct port is reached, release the middle button. Note: If secur

• ADDER ADDERVIEW CATx 1000,       42 User Preferences The User Preferences are system operating parameters that are independently selectable for each user and affect only their screen. Screen Saver Type Settings: BLANK, MOVING DOT You can select the type of screen saver. If you select BLANK then the screen will blank completely. If you select MOVING DOT then a moving dot will be displayed on a blank background. The dot regularly changes colour and bounces off the sides of the screen in a zigzag pattern. Confirmation Box Settings: DISABLED, ENA

•       52 HT Index A Access local and remote users 33 Addressing cascaded computers 15 power switch boxes 12 ADMIN forgotten password 29 password 20 Advanced options 46 Assistance from Adder 39 Autoscanning

•       21 Registering users (edit user list) To create/edit user accounts 1 Display the Configuration menu. Note: You must be logged-in as the ADMIN user. 2 Highlight ‘Edit User List’

• ADDER ADDERVIEW CATx 1000,       28 To edit the configuration settings The saved text file can be opened using either a basic text editor or a spreadsheet program. The format of a typical file is shown opposite. Each entry within the Users section relates to a corresponding entry within the Passwords section and also a column within each row of the Computers section. Hints for editing • To grant a user access to a computer, enter the value ‘1’ in the column of the Computers section that relates

• ADDER ADDERVIEW CATx 1000,       4 AdderView CATx 1000 features - front and rear The AdderView CATx 1000 units pack a great deal of functionality into a compact space. Both models occupy half of a single 1U rack space and provide most of their connectors at the rear face. The smart front face features the remote user link port and the operation indicators. INDOOR USE ON L Y 5V 2.0A 412 311 210 19 816 715 614 513 OPTIONS COMPUTER CONNECTIONSC

•       49 Safety information • For use in dry, oil free indoor environments only. • Both the AdderView CATx 1000 and its power supply generate heat when in operation and will become warm to the touch. Do not enclose them or

• ADDER ADDERVIEW CATx 1000,       51 © 2008 Adder Technology Limited All trademarks are acknowledged. Release 1.0e November 2008 Part No. ADD0075 Adder Technology Limited, Technology House, Trafalgar Way, Bar Hill, Cambridge, CB23 8SQ, United Kingdom Tel: +44 (0)1954 780044 Fax: +44 (0)1954 780081 Adder Corporation, 29 Water Street, Newburyport, MA 01950, United States of America Tel: +1-888-932-3337 Fax: +1-888-275-1117 www.ctxd.com Documentation by: Adder Asia Pacific 6 New Industrial Road,

More Instructions:

ADDER ADDERVIEW CATx 1000 Specifications 01-03-2023 2

DOWNLOAD

Related Products and Documents (Network Card):

Comparable Devices:

Similar Resources:

• Fostex 9046 (1 pages) TRAINING GUIDE: MODEL 9046 DVD OPTION DESCRIPTION The Model 9046 is to be installed in D2424 secondary drive to archive data from the primary drive. A DVD-RAM disk can archive 4.7GB of data on each side for a total storage capacity of 9.4GB. Recorded audio data on the primary hard drive can also be exported to / imported from the DVD-RAM as .WAV file …

• ADTRAN D4 TRI-C DP (1 pages) TRI-C DP / D4TRI-C DP1102182L1B2B1PTRNLOGICOUT(Rx)IN(Tx)NORMAD6AD5AD4AD3AD2AD1NT1LPTXCRTXLPBKTESTLPCRACTTESTERRTRI-C DP / D4CLEI: D4D3MU0D_ _■ For a complete Installation and Maintenance Practice: (877) 457-5007, Document # 427. Please have your fax number available. ■ STATUS LEDsLP ●● OFF TRI loop sync has been established and no Near End Block Er …

• ZyXEL Communications NWA-3550 (1 pages) 1/1 www.zyxel.com Declaration of Conformity We, ZyXEL Communications Corp., located at No.6, Innovation Rd II, Science-Park, Hsin-Chu, 300, Taiwan, declare under our sole responsibility that the product: Product information Product Name : 802.11a/g Outdoor Business WLAN Access Point Model Number : NWA3550, 401797 Produced by Company Name : ZyXEL C …

• Soho 6 (8 pages) Installation Procedures: Macintosh with Internet Explorer 5.x & 6.0 1SOHO 6 Wireless Installation ProcedureMacintosh with Internet Explorer 5.x & 6.0Before you BeginBefore you install the SOHO 6 Wireless, you must have: • A computer with a 10/100BaseT Ethernet card installed and a Web browser, such as Internet Explorer.• A functional Internet con …

• Buffalo LinkStation Pro (9 pages) Package Contents: Main Unit (LinkStation) Ethernet Cable Power Cable LinkNavigator Installation CD Quick Setup Guide (this manual) Warranty Card www.buffalotech.comQuick Setup GuideLinkStation Prov1.4 …

• Bacharach Microprocessor Module (6 pages) 3015-5577 Rev 2 1 621 Hunt Valley Circle New Kensington, PA 15068 3015-5577 Tel: 724-334-5000 Revision 2 Fax: 724-334-5001 May 2013 Microprocessor Module Replacement Kit for the MultiZone Remote Display (MZ-RD) Instruction Manual 1. Scope The Bacharach Remote Display (for use with the MultiZone or MZ family of gas monitors) is designed for …

Comments, Questions and Opinions: