Genius KYE Systems Max Fire Blaze Service Manual

Text of Genius KYE Systems Max Fire Blaze User Guide:

• Genius KYE Systems Max Fire Blaze, 2 Service Guide Contents 1. Revision record --------------------------------------------------4 2. Maintain Guide --------------------------------------------------5 2.1 Introduction ------------------------------------------5 2.2 Necessary tools --------------------------------------5 2.3 Safety attention --------------------------------------5 3. How to handle defective returns -----------------------------6 3.1 Procedure ---------------------------------------------6 3.2 Problem description ---------------------------------7 3.3 Problem solve -------------------------------8.9.10.11.12 4. Assemble & Disassemble ------------------------------

• Genius KYE Systems Max Fire Blaze, 4 Service Guide 2. Maintain Guide 2.1 Introduction Please pay attention to this guide, and follow the information to prevent resulting damage. This maintain-guide is against hardware problems of this pad. 2.2 Necessary tools Screwdriver Tweezers Solder Solder torch Tin-Sucker Tweezers 2.3 Sa fety attentio n When staying for long time, please check electric and power circuit. Place it in flat surface and prevent it from vibration. Don’t drop and jolt this pad. Don’t remove this pad from your PC when it is using.

• Genius KYE Systems Max Fire Blaze, 5 Service Guide 3. How to handle defective returns 3.1 Procedure Function OK Function NG Test &Check problem Received Defective Pad Return the pad to customers Test all function to check the pad is ok. Replace necessary defective parts Frame the solutions and methods Analyze possible malfunction causes Function NG Function OK ------------------------------------------------------ KYE SYSTEMS CORP.

• Genius KYE Systems Max Fire Blaze, 6 Service Guide 3.2 Problem Description Item Problem Description 3.2.1 Minis tick’s function wrong 1) Can’t control minis tick correctly and completely? 2) Minis tick is no work. 3.2.2 Motors are incorrect 1) One or both of two motors is no work. 2) Any Motors’ rotation is incorrect. 3.2.3 No function at all Can’t operate at all, without any function. 3.3 Problem solve 3.3.1 Minis tick’s function wrong en. Problem Analyze the problem Judge the problem causes Solution Minis tick wrong Replace the Minis tick Replace the Minis tick 1. Using for too long time causes the value o f . VR instable 2. Out of life 1. Incorrect using cau

• 7 Service Guide 3.3.2 Motors are incorrect Problem Analyze the problem Judge the problem causes Solution Any motor is no rotating Electronics Motor’s Mechanics 1. Out of life 1. The cord between Motor and PCB is fall off. 3.3.3 No function at all. Problem Analyze the problem Judge the problem causes Solution Replace the Motor Re-sol

• Genius KYE Systems Max Fire Blaze, 8 Service Guide 4. Assemble & Disassemble 4.1 How to Assemble and Disassemble the pad surface Procedure Graphics 1. Disassemble 1) Turn over the pad 2) Put the pad on a flat 3) Rotate screws 4) Separate pad’s covers 2. Assemble 1) Compose all parts according to disassemble drawing 2) Lock all screws firmly 4.2 How to Replace the Motor Procedure Graphics ------------------------------------------------------ KYE SYSTEMS CORP.

• Genius KYE Systems Max Fire Blaze, . Remove 1) Dividually solder the motor line. 2) Remove the defective Motor by Tweezers 2. Replace 1) Change a all right Motor 2) Solder the cord with the new Motor 3. Assemble 1) Put the new Motor into the seat 2) Check all points of solder is ok Service Guide Attention: When remove and tin for motor, For fear short circuit, should make Sure that don’t put tin onto the. Other Component or electrocircuit. Attention: 1.Big and small motor can’t be installed wrong. 2.Positive and negative pole electrical Source line can’t be soldered in reverse. 9 --------------------

• 10 Service Guide 4.3 How to Assemble and Disassemble the PCB Procedure Graphics 1. Disassemble 1) Rotate the screws on the minis ticks’ PCB 2. Assemble 1) Lock the screws 4.4 How to Replace the Minis tick VR & Minis tick hat Procedure Graphics . Remove 1) Disassemble the game pad. 2) Take off the mini-stick hat from the small PCB. Attention: Wh

• Genius KYE Systems Max Fire Blaze, 1) Suck the point of weld of the Resonator by Tin-Sucker. 2) Remove the defective Minis tick VR by Tweezers 2. Replace 1) Insert the same spec, complete Minis tick on the correct hole 3. Solder 1) Solder the Minis tick VR. 2) Check all points of solder is ok. 4. Replace 1) Put a right mini-stick hat to the minis ticks VR and make sure that it position matches the VR. Service Guide 4.5 How to Replace the PCB CABLE. Procedure Graphics 1. Remove 1) Suck the point of weld

• 2. Replace 1) Insert the same spec, complete CABLE on the right hole 3. Solder 1) Solder the CABLE 2) Check all points of solder is ok Service Guide Attention: When remove and add tin for CABLE, for fear short circuit, should make sure that don’t put tin onto other Compenent or electrocircuit. 5. Appendix 1. Part List Item Part No. Name

Related Products and Documents (Video Game Controller):

Comparable Devices:

Similar Resources:

• Nacon REVOLUTION Unlimited Pro Controller (17 pages) “2”, “PlayStation”, “Ø” and “KHJL” are registered trademarks of Sony Interactive Entertainment Inc. All rights reserved.NACON™. “REVOLUTION UNLIMITED Pro Controller” is a product distributed by Bigben.©2O19 Bigben Interactive RCS Lille B32O992977 - 59818 Lesquin Cedex. …

• VRinsight MS Panel (24 pages) MS (Multi Switch) Panel by VRinsightFEATURESThank you for purchasing Multi Switch panel. Please read through this guide before use and contact [email protected], if you have any problem.This guide consists of four sections : FEATURES, INSTALLATION, CALIBRATION and APPLICATION.AEFHIGuide-MS panel(Sept2010)www.vrinsight.comTel : +82-31-284-7090~91 Fax : +82- …

• MPPC SimPedal (2 pages) OUR COMMITMENT TO YOUWe take great pride in the design, quality and performance of each of our products, with the goal of providing the highest amount of enjoyment possible in the price range of that product. We believe that you will be thrilled with any of our growing product lines, and our focus on quality and service is second to none.Our reputation rests …

• Hobbico hammer (8 pages) Warranty• AquaCraft™will warrant this kit for 90 days after the purchase from defects in materials or workmanship. AquaCraft willeither repair or replace, at no charge, the incorrectly made part.• Make sure you save the receipt or invoice you were given when you bought your model! It is your proof of purchaseand we must see it before we can honor the w …

• Mad Catz LYNX (5 pages) LYNX™ WIRELESS CONTROLLERPLAYSTATION®2, PS ONE™ and PLAYSTATION®Thank you for purchasing the Mad Catz Lynx Wireless controller for use with the PlayStation 2/PlayStation/PS one video game system. The Lynx puts you in control of your game system with all the comfort of a remote controller combined with the reliability of cutting-edge wireless techn …

• XBOX 360 (25 pages) WARNING Before playing this game, read the Xbox 360® console, Xbox 360 Kinect® Sensor, and accessory manuals for important safety and health information.www.xbox.com/support.Important Health Warning: Photosensitive SeizuresA very small percentage of people may experience a seizure when exposed to certain visual images, including flashing lights or patter …

Comments, Questions and Opinions: