Gestetner mp161spf Operating Instructions Manual
|
Gestetner mp161spf, Getting Started 14 1 Control Panel This illustration shows the control panel of the machine with options fully in- stalled. 1. {Copy} key Press to activate the copy function. 2. {Scanner} key Press to activate the scanner function. 3. {Printer} key Press to activate the printer function. 4. Indicators Display errors and machine status. h: Error indicator. See Network Guide and see p.35 “x Clearing Misfeeds”. B: Load Paper indicator. See Copy Reference . D: Add Toner indicator. See Copy Reference . 5. Display Displays operation status and messages. 6. Selection keys Correspond to items on the display. Press to select the corresponding item. 7. Scroll keys Press to sel
Gestetner mp161spf, Changing the Paper Size 39 4 When loading 8 1 / 4 " × 14"L or 8 1 / 2 " × 14"L size paper A Pull the back fence off from the tray. B Place it in the corner pocket on the left. D While pressing the release lever, adjust the side fences. E Push the metal plate down, and then square the paper and load it in the tray. Important ❒ Do not stack paper over the lim- it mark. ❒ Load paper so that the paper touches the right side of the tray, or misfeeds might occur. F While pinching the release lever, adjust the side and back fences to the new paper size. Important ❒ When loading small quantities of copy paper, be careful not to squeeze in the side fence to
Gestetner mp161spf, 3 NetBSD 1. Copyright Notice of NetBSD For all users to use this product: This product contains NetBSD operating system: For the most part, the software constituting the NetBSD operating system is not in the public domain; its authors retain their copyright. The following text shows the copyright notice used for many of the NetBSD source code. For exact copyright notice applicable for each of the files/binaries, the source code tree must be consulted. A full source code can be found at http://www.netbsd.org/. Cop
Settings You Can Change with User Tools 27 3 ❖ Key Operator Code Specify whether or not to use passwords (max. eight digits) to control Key Operator Tools settings for key operator code. Note ❒ Default: Off ❒ If you select [On], enter the key operator code (max. eight digits) using the number keys, and then select [On:Partial] or [On:All] to set the access limit. •If you selected [On:P
Gestetner mp161spf, User Tools ( System Settings ) 26 3 ❖ System Auto Reset Timer The System Reset setting automatically switches the screen to that of the func- tion set in Function Priority when no operations are in progress, or when an interrupted job is cleared. This setting determines the system reset interval. See p.23 “Function Priority”. Note ❒ Default: On, 60 sec. ❒ The time can be set from 10 to 999 seconds in 1 second increments, using the number keys. ❒ When the set time has passed, the control panel returns to the men
Gestetner mp161spf, 33 4. Troubleshooting If Your Machine Does Not Operate As You Want The following chart gives explanations of common problems and messages. If other messages appear, follow the instructions displayed. Note ❒ For further “Troubleshooting”, refer to the other manuals for this machine. See p.i “Manuals for This Machine”. Problem Causes Solutions “ Please wait. ” ap- pears. This message appears when you turn on the oper- ation switch or change the toner bottle. Wait for the machine to get ready. The display is off. The machine is in Energy Saver mode. Turn on the operation sw
Gestetner mp161spf, Troubleshooting 38 4 F Square the paper and load it in the tray. Important ❒ Be sure to set the paper under the roller. ❒ Do not stack paper over the lim- it mark. G While pressing the release lever, adjust the side fences to the new paper size. Important ❒ When setting small quantities of copy paper, be careful not to squeeze in the side fence too much or paper will not feed in properly. H While pressing the release lever, set the back fence to the new size. I Push the paper tray in until it stops. Changing the Paper Size
User Tools ( System Settings ) 30 3 User Code Register user codes to restrict copier functions to certain users, and check on their use of copier functions: Registering a New User Code A Press the {User Tools/Counter} key. B Select [ System Settings ] using {U} or {T} , and then press the { OK } key. C Select [Key Operator Tools] using {U} or {T}, and then press the {OK
43 6. Specifications Main Unit ❖ Configuration: Desktop ❖ Photosensitivity type: OPC drum ❖ Original scanning: One-dimensional solid scanning system through CCD ❖ Copy process: Dry electrostatic transfer system ❖ Development: Dry two-component magnetic brush development system ❖ Fusing: Heating roll pressure system ❖ Resolution: 600 dpi ❖ Exposure glass:
Gestetner mp161spf, Getting Started 16 1 Reading the Display and Using Keys This section explains how to read the display and use the Selection keys. 1. Selection keys Correspond to items at the bottom line on the display. Example: The Copy display • When the instruction “press [Reduce] ” appears in this manual, press the left selection key. • When the instruction “press [Enlarge] ” appears in this manual, press the centre selection key. • When the instruction “press [Zoom] ” appears in this manual, press the right selection key. 2. {Escape} key Press to cancel an operation or retu
User Tools ( System Settings ) 32 3 Displaying the Counter for Each User Code You can check the counter for each user code. A Press the {User Tools/Counter} key. B Select [System Settings] using {U} or {T}, and then press the {OK} key. C Select [Key Operator Tools] using {U} or {T}, and then press the {OK} key. D Select [Counter per User Code] using {U} or {T}, and then p
Gestetner mp161spf, User Tools ( System Settings ) 24 3 ❖ Measurement Unit You can switch the measurement between “mm” and “inch”. Note ❒ Default: •Metric version: mm • Inch version: inch Tray Paper Settings ❖ Paper Size: Tray 1–2 Select the size of the paper loaded in the paper tray. • The paper sizes you can set for Tray 1 is as follows: A4L, B5JISL, A5K, 8 1 / 2 " × 11"L, 5 1 / 2 " × 8 1 / 2 "K, 16KL • The paper sizes you can set for Tray 2 is as follows: A4L, 8 1 / 2 " ×
Gestetner mp161spf, Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference. Important Contents of this manual are subject to change without prior notice. In no event will the company be li- able for direct, indirect, special, incidental, or consequential damages as a result of handling or oper- ating the machine. Notes: Some illustrations in this manual might be slightly different from the machine. Certain options might not be available in some countries. For details, please contact
Gestetner mp161spf, Control Panel 15 1 13. {On Line} key Reference Printer/Scanner Reference 14. Copier function keys Reference Copy Reference 15. {Lighter} and {Darker} keys Press to change the image density setting. Select the image density in five incre- ments, Lighter to Darker. 16. {Escape} key Press to cancel an operation or return to the previous display. 17. {Original Type} key Press to select the original type registered in [Original Type 1 (Text)] or [Original Type 2 (Photo)]. When the original type is select- ed, the corresponding indicator lights. 18. {OK} key Press to set a selected item or an entered numeric value. 19. Number keys Press to ent
Gestetner mp161spf, ii TABLE OF CONTENTS Manuals for This Machine ......................................................................................i Copyrights and Trademarks .................................................................................1 Trademarks ................................................................................................................1 Information about Installed Software..........................................................................1 How to Read This Manual ...................................................................................
Gestetner mp161spf, Options 13 1 Options External Options 1. Exposure glass cover Lower this cover over originals. 2. ARDF Place stacks of originals here. They will feed in automatically. This doc- ument feeder can be used for two-sided originals. 3. Paper tray unit (Tray 2) Holds 500 sheets. 12 3 ARK025S Downloaded from ManualsPrinter.com Manuals
Gestetner mp161spf, Troubleshooting 40 4 Selecting the Paper Size with User Tools A Press the {User Tools/Counter} key. B Select [System Settings] using {U} or {T}, and then press the {OK} key. C Select [Tray Paper Settings] using {U} or {T}, and then press the {OK} key. D Select the paper tray you want to change the paper size for using {U} or {T}, and then press the {OK} key. E Select the paper size using the scroll keys, and then press the {OK} key. The “ Programmed” message ap- pears. F Press the {User Tools/Counter} key. ARK004S Downloaded from ManualsPrinter.com Manuals
Gestetner mp161spf, 51 INDEX A Accessing user tools ( System Settings ) , 21 AOF (Always On) , 29 ARDF , 13, 46 Auto off timer , 25 Auto reset timer , 26 copier , 26 B Bypass tray, 12 C Changing a user code, 30 Changing default settings , 21 Changing modes , 17 Changing the language , 41 Changing the paper size , 37 Changing the Paper Size in the Paper Tray Unit (Tray 2) , 38 Changing the Paper Size of the Paper Tray (Tray 1) , 37 Clearing misfeeds , 35 Clearing the counter , 32 Combined function operations , 17 Common key operations , 16 Control Panel , 12 Control panel , 14 Copy Count Display , 23 Co
Gestetner mp161spf, Settings You Can Change with User Tools 23 3 Settings You Can Change with User Tools Reference To access User Tools, see p.21 “Accessing User Tools ( System Settings )”. General Features ❖ Panel Key Sound The beeper (key tone) sounds when a key is pressed. Note ❒ Default: On ❖ Copy Count Display The copy counter can be set to show the number of copies made (count up), or the number of copies yet to be made (count down). Note ❒ Default: Up (count up) ❖ Function Priority You can specify the mode to be displayed immediately after the operation switch is turned on, or when System Reset mode is turned on. Note ❒ Default: Copier ❖ Print Priority Set the print priorit
Gestetner mp161spf, Specifications 44 6 ❖ Copy paper size: •Trays: A4L, B5 JISL, A5K, 8 1 / 2 " × 11"L, 5 1 / 2 " × 8 1 / 2 "K, 16KL •Bypass: A4 L , A5 KL , B5 JIS L , 8 1 / 2 " × 14" L , 8 1 / 2 " × 11" L , 5 1 / 2 " × 8 1 / 2 " KL , 7 1 / 4 " × 10 1 / 2 "L, 8" × 13"L , 8 1 / 2 " × 13"L , 8 1 / 4 " × 13"L, 8 1 / 4 " × 14"L, 16KL, 4 1 / 8 " × 9 1 / 2 "L, 3 7 / 8 " × 7 1 / 2 "L, C5 EnvL, C6 EnvL, DL EnvL • Bypass (custom size): Vertical: 90 – 216 mm, 3.5" – 8.5" Horizontal: 140 – 600 mm, 5.6" – 23.7" • Duplex unit:
Epson Artisan 710 All in One Printer Network installation manual
Artisan 710 |
Xerox WorkCentre 5632 All in One Printer Specifications
WorkCentre 5632 |
Gestetner DSm755 All in One Printer General settings manual
DSm755 |
Epson RX700 All in One Printer Basic operation manual
RX700 |
Epson Stylus Pro 7000 Series All in One Printer Product information
Stylus Pro 7000 Series |
Konica Minolta Magicolor 2590 MF All in One Printer Technical manual
Magicolor 2590 MF |
HP LaserJet 1300 All in One Printer Start here
LaserJet 1300 |
HP 2550L - Color LaserJet Laser Printer All in One Printer Install manual
2550L - Color LaserJet Laser Printer |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Thule | RideAlong | Product overview | thule/ridealong-2C8.pdf | 10 Jul 2022 | 32 | |
2 | Philips | Multi-Protocol Converter | Installation instructions | philips/multi-protocol-converter-C45.pdf | 27 May 2023 | 4 | |
3 | BT | Paragon 510 | Operation & user’s manual | bt/paragon-510-KN5.pdf | 21 Jun 2022 | 71 | |
4 | Jawbone | BIG JAMBOX | Quick start manual | jawbone/big-jambox-O71.pdf | 13 May 2023 | 13 | |
5 | EBS | ClassicT90 | Operation & user’s manual | ebs/classict90-IGW.pdf | 26 Jan 2023 | 4 | |
6 | Philips | HP6335/00 | Operation & user’s manual | philips/hp6335-00-8BI.pdf | 26 Aug 2023 | 9 | 0.67 Mb |
Canon
FAQ GuideFT6-2269 (010) XXXXXXXXXX Copyright CANON INC. 2019 PRINTED IN CHINAPlease read "Important Safety Instructions" before operating this product. P.36After you finish reading this guide, store it in a safe place for future reference.The information in this document is …
IMAGERUNNER ADVANCE SERIES(44 pages) |
Ricoh
Adjustment Item Menu Guide: TCRU/ORU Model Name: Pro C901S/Pro C901 Read this manual carefully before using this machine and keep it handy for future reference. 1
…
Pro C901S(82 pages) |
Canon
1 Preface Next Page 2 Installing the Machine P. 6 Read this guide first. Please read this guide before operating this product. The remarks for important safety instructions are described in "Basic Operation Guide." Read the guide also. After you finish reading this guide, store it in a safe place for future reference. Star …
imageCLASS D550(28 pages) |
Xerox
607E02650 Rev A© 2014 Xerox Corporation. All Rights Reserved. Xerox®, Xerox and Design®, and WorkCentre® are trademarks of Xerox Corporation in the United States and/or other countries.Xerox® WorkCentre® 3215/3225 Quick Use GuideXerox WorkCentre 3215/3225Multifunction PrinterУкраїнськаSlovenskySlovenščinaȷɚɡɚʅКороткий посі� …
WorkCentre 3215(16 pages) |
Xerox
30 kg66.1 lb.3.13.2 3.31 2 3Software and DocumentationXerox® WorkCentre® 6505Software and Documentation1.1 1.225.0 cm(9.8 in.)77.5 cm(30.5 in.)10.0 cm(3.9 in.)10.0 cm(3.9 in.)54.9 cm(25.4 in.)120.7 cm(47.5 in.)60.0 cm(23.6 in.)27.5 cm(12.50 in.)4.24.14.38X5.15.3 5.4 5.55.2EthernetUSBRG-6RJ-11RJ-45A/B USBUse Ethernet hub and category 5 cablesXerox® WorkCen …
WorkCentre 6505(4 pages) |
Lexmark
AnslutningsguideOperativsystem som kan användas• Windows 8• Windows 7 SP1• Windows 7• Windows Server 2008 R2 SP1• Windows Server 2008 R2• Windows Server 2008 SP1• Windows Vista SP1• Windows Vista• Windows Server 2003 SP2• Windows Server 2003 SP1• Windows XP SP3• Windows XP SP2• Mac OS X version 10.5 eller senare• Debian GNU/Linux …
M1145(6 pages) |
Norcross Fish Finder H22FXH22FX Operation & user’s manual - 84D687 H22FX, 12 |
Panasonic 3D Glasses TY-EP3D10EBPanasonic TY-EP3D10EB 3D Glasses Operating instructions manual TY-EP3D10EB, 102 |
Snell Advanced Media Remote Control IQCAG00#NE97D2 IQCAG00: Snell Advanced Media Remote Control Owner Documentation IQCAG00, 22 |
Lux4Kids Stroller Baby Merc Q8Stroller #LZR83S Baby Merc Q8, 7 |
Campbell Hausfeld Nail Gun CHN70900Nail Gun #MLQRL4 CHN70900, 60 |
Grundig Stereo Receiver M 7-CPDF Guide (@S926VX), Grundig M 7-C Stereo Receiver (23.01.2024) M 7-C, 62 |
GMC Automobile SIERRA 1997PDF Manual (@685A3L), GMC SIERRA 1997 Automobile (10/12/2023) SIERRA 1997, 436 |
Advanta Indoor Furnishing ADVANCED DYNAMIC MechanismPDF User Manual (@9WXN79), Advanta ADVANCED DYNAMIC Mechanism Indoor Furnishing (Thursday 25-01-2024) ADVANCED DYNAMIC Mechanism, 2 |
Texas Instruments Measuring Instruments TPS61130EVMMeasuring Instruments PDF Operation & user’s manual TPS61130EVM, 20 |
Oki All in One Printer C9600nAll in One Printer PDF Operation & user’s manual C9600n, 130 |
Gallien-Krueger Speakers Backline Series sheetGallien-Krueger Speakers Backline Series sheet Specification sheet Backline Series sheet, 2 |
Acomdata Storage PDHD750USE-72Acomdata Storage Technical specifications (File: acomdata-pdhd750use-72-quick-start-manual-1, Sunday 31-12-2023) PDHD750USE-72, 1 |