Holy Stone X401H-V2 Instruction Manual

Text of Holy Stone X401H-V2 User Guide:

• 6 7 8. Replace the battery.................................................................................................................. 9. Charge the battery.................................................................................................................... 10. Before the ight.............................................................

• Holy Stone X401H-V2, Technical parameter of the model Fuselage Length:298mm Overall Height: 76mm Main Rotor Diameter: 135mm Gross Weight: about 128g Battery: Li-polymer 7.4V 350mAh Charging Time: about 40 minutes Motor: Brushless motor Introduction ●Quad-rotor design insures more stable and powerful performance and make all kinds of 3D action easier. ●Headless mode and one key return are available. ●New designed structure makes assembly and maintenance easier. ●Adopting 2.4G auto connection technology, scores of m

• Holy Stone X401H-V2, 1 Safety guidelines ●This product is not a toy. It is not applicable for children who are under 14 years old. ●Please read this instruction manual carefully before playing and operate the product according to the manual. ●The users are in full charge of proper operating the model. The manufacturer and dealers disclaim all responsibility for the damage caused by misuse. ●Keep the small accessories away from the kids to avoid accident. ●Keep batteries away from fire or high temperature environment. ●When flying the model, keep it 1~2 meters away from user or others to avoid injury due to collision. ●Not to decompose

• Holy Stone X401H-V2, 2 Sketch and function switches of the remote controller Remote Controller(Transmitter) 3. Light switch/ Headless Mode/A Key Back switch Light switch (Short press) Headless mode /A Key Back Switch (Long Press) 1.Power switch Power switch 12. Power indicator 11. 3D Flips 4. Left stick 9. Right stick 5. Trimmer A 6. Trimmer B 7. Trimmer C 8. Trimmer D No. Function switch Function description 1.This is the light switch of the model. Press it once to turn on the light and press it once again to turn off the light. 2.Headless mode on-off button: Press this button for about 2

• Holy Stone X401H-V2, 3 3D Flips Left stick4 5 6 7 8 9 10 11 12 Right stick Trimmer A In stick Mode 2 and 4, this button is null. In stick Mode 1 and 3, it helps to tune the model's forward and backward flight. STICK MODE 2:upward/downward,turn left/turn right; STICK MODE 4:upward/downward,leftward/rightward. STICK MODE 1:forward/backward,turn left/turn right; STICK MODE 3:forward/backward,leftward/rightward. STICK MODE 1: upward/downward,leftward/rightward; STICK MODE 3: upward/downward, turn left/turn right; STICK MODE 2: forward/backward,leftward/rightw

• 4 1.5V AA 1.5V AA 1.5V AA 1.5V AA 1.5V AA 1.5V AA 1.5V AA 1.5V AA 1.5V AA 1.5V AA 1.5V AA 1.5V AA 1. Unscrew counter clockwise to open the battery compartment cover. ( Pic.1 ) 2. Install 4 X AA batteries into the battery compartment according to the given polarity. ( Pic. 2 ) 3. Screw clockwise to close the battery compartment. (Pic. 3) How to install the battery of remote control

• Holy Stone X401H-V2, 5 STICK MODE:3 STICK MODE:4 Forward / Backward control Forward / Backward control Throttle control Throttle control Left/Right turning control Left/Right turning control Leftward/ Rightward control Leftward/ Rightward control There are 2 flight speeds available: low speed and high speed. Player can select the flight speed by pressing the H/L speed button. Flight speed selection The model Light Motor OFF/ON Rotor blade B Rotor blade B Rotor blade A Rotor blade A Protecting frames Landing gear Camera Major parts of the model Low Speed High Speed

• 6 Protection frame and landing gear installation 1.There are 3 interfaces on each motor cabinet. Insert the frame plugs into the interfaces and fix it.（Pic.4） 2.Fix the protection frame by screwing clockwise.（Pic.5） 3.There are 4 interfaces at the bottom of the model, insert the landing gear plugs into the interfaces and fix them. The landing gear is trapezoid, make sure

• Holy Stone X401H-V2, 7 Preparation for flight ●Double check the place where the pilot uses the model, make sure that it is free from the crowd, animals and other barrier. ●Turn on the remote controller and the power indicator light flashes rapidly and sends out connectional signal to the drone. ●Slide the throttle control stick up to the top; then, return the throttle control stick down to the bottom; It will take about 10 seconds to finish the signal connection process. Once signal connection is completed, the power light will stay "on" without blinking and the remote contro

• Holy Stone X401H-V2, 8 Rotor blade B (Motor 2) Rotor blade B (Motor 4) Rotor blade A (Motor 1) Rotor blade A (Motor 3) Head of the model Tail of the model Left Right ●Push up the throttle stick slowly and the model takes off. ●To avoid any misunderstanding, we have defined the orientation of the model as below: The head of the drone is set right ahead while the tail face the player. The direction where the head of the copter points at is named as “forward”, the direction of the tail is named as “backward”. The direction that the copter flies up to the sky is named as “upward”; The direction that the copter lands to the gr

• Holy Stone X401H-V2, 9 ●The blue LED lights are at the front of the model; The orange LED lights are at the back of the model. ●When the model is on, checking the rotation direction of the rotor blades; The front-left and right-back rotor blades(Motor 2, 4) should be rotating in clockwise direction; the right-front and left-back rotor blades (Motor 3, 1) should be rotating in counter-clockwise direction. ●If the model keeps flying to one side, it can be corrected by adjusting the trimmer on the remote control. Remarks: ●Signal connection between the model and the remote control is required for the first us

• Holy Stone X401H-V2, 10 If the model keeps drifting forward, push down Trimmer D until it gains balance. If the model keeps drifting backward, push up Trimmer D until it gains balance. STICK MODE 2 or 4: STICK MODE 3 or 4: STICK MODE 1 or 2: If the model keeps drifting leftward, turn right of Trimmer B until it gains balance. 2. If the model keeps drifting leftward/rightward, users may adjust the aileron trimmer buttons to keep the model balanced. If the model keeps drifting rightward, turn left of Trimmer B until it gains balance. If the model keeps drifting leftward,

• Holy Stone X401H-V2, 11 STICK MODE 1 or 2: STICK MODE 3 or 4: If the model keeps rotating counterclockwise in the air, turn right of Trimmer B until it gains balance. If the model keeps rotating clockwise in the air, turn left of Trimmer B until it gains balance. 3. If the model keeps rotating even there is no control signal sent out, users may adjust the trimmer buttons to keep the model balanced. If the model keeps rotating counterclockwise in the air,turn right of Trimmer C until it gains balance. If the model keeps rotating clockwise in the air,turn left of Trimmer C until it gains balance. Operating Upward Push up

• Downward Turn left Turn right Turn the left/right turning control stick to the left,the model will turn left. Turn the left/right turning control stick to the right,the model will turn right. Push down the throttle control stick, the rotation speeds of the mains rotors are decreasing and the model descends accordingly. 12 Leftward flight Rightward fligh

• Holy Stone X401H-V2, 13 3D Flips Landing and emergency stop Press the 3D Flips button and push the forward/backward or the leftward/rightward control stick to the edge to perform the rolling actions accordingly. Notes: We suggest beginner choose a space without obstacles or a soft ground to fly the quadcopter. Short-press the one key landing button or push the throttle control stick to make the drone gently land to the ground. About 2 seconds later, the drone will thoroughly stop flying. When the drone is flying lower than 1 meter height above the ground, and you need to stop the drone urgently, please hold the

• Holy Stone X401H-V2, 14 Enter into headless mode: Once signal between the model and the remote control is successfully connected, press the function button at top right of the remote control for 2 seconds. The remote control will send out two beep sounds and there will be letters of “Stick Mod” flashing on the LCD screen, the model’s indicator light turns from constant ‘ON” to “flashing”. That indicates that the model enters into Headless Mode. Exit headless mode: When the model is in headless mode, press the function button at top left of the remote control of 2 seconds, the remote control will send out 3 beeps and the letter “Stick Mod” keeps constant “on”;

• Holy Stone X401H-V2, 15 Flight direction control in headless mode: Turn right the turning control stick; the model will turn to the right side of the player. Turn left the turning control stick; the model will turn to the left side of the player. Turn right the sideward flight control stick, the model will fly to the right side of the player in leaning. Turn left the sideward flight control stick; the model will fly to the left side of player in leaning. Push down the forward/ backward control stick, the model will fly backward, towards the player. Push up the

• 16 Schematic diagram of the connection of the motors and the PCB It is important that the installation of the PCB and the wire connection of the motor to the PCB should be connected properly according to the diagram shown as below. Altitude-Hold Function The model is designed with Altitude-Hold function so that the quad can stay at the current altitude when you release t

• Holy Stone X401H-V2, 17 + - + - + - + - 1 2 3 4 Camera Interface Motor 1 Motor 2 Motor 3 Motor 4 1.Motor 1 should be connected with interface 1. 2.Motor 2 should be connected with interface 2. 3.Motor 3 should be connected with interface 3. 4.Motor 4 should be connected with interface 4. Receiver board 4.Connect the motor wire of the new motor to the power wire plug. 5.Install the motor into the main body of the model. 6.Lock the motor house with the screw. Installed with #C4016 camera, the model can take photos and videos. Download and install the F

• Holy Stone X401H-V2, 18 2.The camera should be fastened to the interface at the bottom of the drone, fix the camera with screws. 3. Insert the camera wire plug into camera interface. 6 5 4 4.Insert the plug of the camera wire into the camera interface and connect the plug of another end with the battery wire. 3.Set the mobile phone holder to the top of the remote control. 2.Adjust the fixing component upward or downward according to the size of the mobile phone. 1.Connect the stand bar to the

• Holy Stone X401H-V2, 19 Note: The App control mode could not be used together with the Transmitter control. If the player is using the App control, please make sure the transmitter is powered off. Vice versa, please keep the App control mode powered off when you operate the drone with the transmitter. Install the App Mount camera #C4016 on the drone and download the App“HOLY STONE” to your smart phone, the photos and videos taken by the camera can be viewed on the smart phone screen alive when the model is flying. Download and set the FPV real-time App & App Functions Pic.27 Pic.28 Pic.29 There are two modes of the “HOLY STONE

• You can also scan the QR Code to download the apk for android system. You can also scan the QR Code to download the app for IOS system. For Android system, please visit our website WWW.HOLYSTONE.COM to download the from the product accordingly. For Apple IOS system, please go to the APP store to download the App “HOLY STONE”. 20 (QR CODE) (QR CODE) I

• Holy Stone X401H-V2, 20 4.H/L Speed 19.App Control Switch 18.Start Switch 17.Landing Switch 14.3D View 24.Flight route 15.Play 11. Return Key 16.WIFI signal of the drone 1 2 3 H/L speed 4 5 3. 360° Flips 8. Light Switch 7. One Key Back 6. Headless mode 12.Photo 13.Video 2. 180° Eversion 1. Hide the interface 180° Eversion 360° Flips 22. Trimmer C 23. Trimmer D 21. Trimmer B 20. Trimmer A No. Function switch Function description APP “HOLY STONE”control functions 5.Gravity Sensor Control Mode 9.Control Modes Switches 10.Low-level/ medium-

• Holy Stone X401H-V2, 21 Landing switch 6 7 8 10 9 3D 14 12 13 11 15 16 17 Light Switch One Key Back Headless mode Photo Video No. Function switch Function description Turn on the remote control. Touch this icon to enter into headless mode and adjust the drone. Touch this icon while the drone is in headless mode. The drone will return with rear heading back. Touch this icon to turn on or turn off the light. Modes Switches The 4 modes are as below: MOD 2: The left control stick is the throttle control and left/right turning stick. The right stick is the forward/ backward flight and leftward/rightward flight stick. MOD 1: The left control stick is the forward/backward control and left/right tu

• Holy Stone X401H-V2, 22 Start Switch 24 20 19 21 22 23 18 No. Function switch Function description Trimmer A In stick Mode 2 and 4, this icon is null. In stick Mode 1 and 3, it helps to tune the model's forward and backward flight. In stick Mode 3 and 4, it helps to tune the model's sideward flight. In stick Mode 1 and 2,it helps to tune the model's left and right direction turning speed. Trimmer B In stick Mode 1 and 3, this icon is null. In stick Mode 2 and 4, it helps to tune the model's forward and backward flight. Trimmer D In stick Mode 3 and 4, it helps to

• Holy Stone X401H-V2, 23 Start switch Landing switch How to stop the APP mobile phone control in emergency case and how to correct the gyro Instructions on how to take off the drone by mobile phone APP control Check and make sure that the camera #C4016 is correctly mounted on the drone; and then connect the battery wire with the power plug of the receiver PCB and Camera. Turn on the drone, the LED light of drone will flash quickly and drone is in the gyro detection state. Place the drone on a flat surface; enter into the Setting of the mobile phone. Ope

• Holy Stone X401H-V2, 24 When the model is in headless mode, flight direction proof is needed. Set the head of the model ahead of the player, turn both of the two control sticks to the lower right corner for about 2 seconds, the model’s indicator light will turn from slowly flashing to quick flashing and the recalibration is completed. Trouble shooting 1 2 3 4 Phenomenon Reason Solution The lights are flashing quickly. Gyro of the model is under signal detecting condition. Set the model on a flat surface. The lights are flashing on twice and fla

Related Products and Documents (Quadcopters):

Comparable Devices:

Similar Resources:

• RCTECH GT-4160 (8 pages) GT-4160720p HD FPV4 Channel RCQuadcopterQuadcopter OverviewRemote Control OverviewHeadless Mode ExplainedRemote Control Battery & PairingRemote Control ModeFPV ScreenRotor Guards & Landing StrutsCharge the QuadcopterPreparation and PairingFlight Control and Trim12345678910360° FlipTroubleshooting1112Parts List13 …

• SUPERNOVA Spy Quad-Drone (5 pages) 1Please read this manual before operating the quadcopter.Keep this instruction manual for future reference.ITEM NO: 350562.4GHz 4.5CH RC QUADCOPTERINSTRUCTION MANUAL …

• dji LIGHTBRIDGE (49 pages) ©2014 DJI. All Rights Reserved. 1 DJI LIGHTBRIDGE User Manual V1.0 2014.08 …

• Vifly R220 M2 (8 pages) VIFLY R220 Quick Start Guide 16 / 16 Group A: CH1:5658MHz CH2:5695MHz CH3:5732MHz CH4:5769MHz CH5:5806MHz CH6:5843MHz CH7:5880MHz CH8:5917MHz Group B: CH1:5740MHz CH2:5760MHz CH3:5780MHz CH4:5800MHz CH5:5820MHz CH6:5840MHz CH7:5860MHz CH8:5880MHz Group C: CH1:5865MHz CH2:5845MHz CH3:5825MHz CH4:5805MHz CH5:5785MHz CH6:5765MHz CH7:5745MHz CH8:5725MHz Grou …

• Carrera RC Quadrocopter Guidro (88 pages) # 370503015  Carre ra RC Quadrocopter GuidroMade in China, Shantou.Montage- und Betriebsanleitung Assemb ly and operating instructions Instructions  de montage et d’utilisation Instrucciones de montaje y de servicio Istruzioni per il montaggio e l’uso Montage- en gebruiksa anwijzing Instruç …

• Autel EVO Lite Series (39 pages) SchnellstartanleitungGuide de démarrage rapideQuick Start Guide …

Comments, Questions and Opinions: