Manualios.com

Baumatic BEC460SS Service Manual

Baumatic BEC460SS Manual Online:

3.1, 2331 votes
Baumatic BEC460SS User Manual
Baumatic BEC460SS User Guide
Baumatic BEC460SS Online Manual

Text of Baumatic BEC460SS User Guide:

  • Baumatic BEC460SS, CONTENTS A) SAFETY B) SCOPE OF THIS MANUAL C) DIMENSIONS D) HYDRAULIC DIAGRAM E) WIRING DIAGRAM F) STRUCTURE 1) general accessibility 2) automatic unit compartment accessibility 3) component compartment accessibility G) QUICK COUPLING CONNECTIONS H) SAFETY THERMOSTAT RESET 1

  • Baumatic BEC460SS, A / SAFETY Before accessing the internal components and, in general, before doing any jobs on the appliance, make sure the power plug has been disconnected and that any heated parts have cooled down. IMPORTANT: The appliance in question has metal parts. We therefore advise being very careful when handling or doing jobs on these to avoid scratches, abrasions or cuts. B / SCOPE OF THIS MANUAL This manual has been compiled for technicians with the skills required to repair coffee machines for home use. Its purpose is to provide details of a general nature regarding the product, to make any jobs and maintenance easie

  • Baumatic BEC460SS, D / HYDRAULIC DIAGRAM oth circuits, hot water/steam and coffee, use the same pump. Hence functions must be performed ort description of the dynamics and operating sequences concerning the three main functions: offee: required dose has been selected and the cycle has been started, powder preparation and - Hot water: been selected, keep the start key pressed for the required dispensing time. er pushed luid still in the team: function has been selected, keep the start key pressed for the required dispensing time. arted, the luid still in the B individually. Below is a sh -C Once the automatic unit positioning is followed b

  • Baumatic BEC460SS, F / STRUCTURE 1) GENERAL ACCESSIBILITY BEFORE PROCEEDING, DISCONNECT THE MACHINE FROM THE POWER MAINS To work inside the appliance, proceed to dismantle as follows: Loosen the screws on the upper part of the appliance Raise and remove the lid as shown in the photo. 5

  • H E D B C A G F Once the lid has been removed, the following components can be accessed: -A: Top part of the automatic unit to do jobs on the safety thermostat , temperature probe, connections and pipes. -B: Coffee and steam circuit solenoid valves for jobs on coils or pipes. -C: Electronic board for checking cables or changing fuses. -D: Flow

  • Baumatic BEC460SS, This compartment can be accessed in two ways: by means of the service door for checking the apparatus or by removing the right section of the bodywork for bigger jobs. -SERVICE DOOR: Only technical personnel must access the appliance through the service door. For greater safety, the closing screw is of the TORX M4x10 type and consequently a suitable screwdriver is required. Remove the screw and open the door to make necessary inspections. -REMOVAL OF RH BODYWORK: Remove the two screws on the rear. Remove the four screws on the side.

  • Baumatic BEC460SS, Remove the five screws on the lower section. Remove the grinding regulation knob as shown. Now the entire RH section can be removed and access obtained to the unit and the micro switches of the side doors and dredge unloading. The photo shows the two micro switches of the door and dredge unloading. The micro with three attached wires also sends a signal to the board for dredge count reset. 8

  • Baumatic BEC460SS, The photo shows the two micro switches of the side door. These disconnect the entire power circuit downstream of the master switch. If jobs have to be done on the automatic unit, disconnect the delivery and exit pipes of the exchanger, proceeding as indicated under “QUICK-COUPLING CONNECTIONS”. Remove the power connections. 9

  • Baumatic BEC460SS, Disconnect the silicone pipe from the brass part located at the centre of the exchanger cover. Loosen the upper retention screw of the unit introducing the tool through the holes shown in the illustration. Loosen the lower retention screw as shown in the illustration. 10

  • Baumatic BEC460SS, Now the unit can be removed by pulling it towards you When fitting the automatic unit back on, be careful to correctly fit the pin of the same unit on the motor shaft as shown in the illustration 3) COMPONENT COMPARTMENT ACCESSIBILITY 11

  • Baumatic BEC460SS, Loosen the two retention screws of the tank support band by inserting the tool through the holes shown in the illustration. Once the tank support has been removed, loosen the two side screws as shown in the illustration. Loosen the retention nut of the pump- grinder support indicated in the photo. 12

  • Baumatic BEC460SS, Loosen the two screws shown in the photo. Loosen the screw shown in the photo. Remove the five retention screws shown in the bottom of the machine. 13

  • Baumatic BEC460SS, After slightly shifting the left plate disconnect the wires of the water sensor. Remove the left side bodywork Besides now being able to freely access all the machine parts, the main fuse located on the base can also be changed. G) QUICK-COUPLING CONNECTIONS 14

  • The quick-coupling connections allow quickly performing all maintenance jobs on the hydraulic connections of the machine. To use these correctly, do not use tools but only your fingers. The first thing to do to disconnect a hose is to lightly press on the edge of the connector. Afterwards, simply apply a light f

  • Baumatic BEC460SS, The two safety thermostats on the coffee exchanger and on the steam/hot water exchanger can be manually reset. To reset, press the top button. 16

More Instructions:

DOWNLOAD

Related Products and Documents (Coffee Maker):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Open Country Electric Roaster Oven Care/use and recipe manual open-country/electric-roaster-oven-VMG.pdf 19 Feb 2023 32
2 Sony LF-B10 Specifications sony/lf-b10-SD7.pdf 16 Jan 2024 2 0.94 Mb
3 Acer X1110 Operation & user’s manual acer/x1110-6HE.pdf 12 Jan 2024 58 2.76 Mb
4 Nokta 107 TB Technical manual nokta/107-tb-36E.pdf 22 Oct 2022 16
5 Plura SFP-217-3G Operating instructions manual plura/sfp-217-3g-2SU.pdf 16 Oct 2022 48
6 Zebra F680 Operation & user’s manual zebra/f680-IPT.pdf 15 Nov 2023 60 22.76 Mb

Similar Resources:

  • Toastmaster

    543U

    (7 pages)
    I M P O RTANT SAFEGUA R D SWhen using electrical appliances, basic safety precautions should always befo l l owed to reduce the risk of fire, electric shock and injury to persons,i n c l u d i n g the following:• Read all instructions before using appliance.• Do not touch hot surfaces.• Do not immerse cord, plug or coffeemaker unit in water …
  • Bunn

    TB3-LP

    (16 pages)
    TB3 LPILLUSTRATED PARTS CATALOGDesigns, materials, weights, specifi cations, and dimensions for equipment or replacement partsare subject to change without notice.BUNN-O-MATIC CORPORATIONPOST OFFICE BOX 3227SPRINGFIELD, ILLINOIS 62708-3227PHONE: (217) 529-6601 FAX: (217) 529-6644 37237.0001 07/06 ©2006 Bunn-O-Matic Corporation www.bunn.com …
  • Wilbur Curtis Company

    TBS

    (10 pages)
    1SymbolsWARNINGS – To help avoid personal injuryImportant Notes/Cautions – from the factorySanitation RequirementsModels Included:• TBSWARNING HOT LIQUID, Scalding may occur. Avoid splashing. The Curtis G3 Brewer is Factory Pre-Set and Ready to Go… Right from the Box.Following are the Factory Settings for the G3 Iced Tea Brewer. • Brew Temperature …
  • VBM

    Domobar Super HX

    (184 pages)
    Manuale di Istruzioni Istruzioni originaliInstruction manual Translation of original instructionsManuel d’Instructions Traduction des instructions d’origineBedienungsanleitung Übersetzung der OriginalanleitungManual de instrucciones Traducción de las instrucciones originalesSUPERHXI TAENGFRADEUESPIntro_DomobarSuperHX Manuale_Rev0_03-2016_5lingue.indd …
  • Bunn

    TB3

    (31 pages)
    TB3TB3-LPOPERATING & SERVICE MANUALBUNN-O-MATIC CORPORATIONPOST OFFICE BOX 3227SPRINGFIELD, ILLINOIS 62708-3227PHONE: (217) 529-6601 FAX: (217) 529-6644 37235.0000D 05/06 ©2004 Bunn-O-Matic Corporation www.bunn.com …
  • Black & Decker

    Coffeematic DCM90M Series

    (9 pages)
    5432POR FAVOR LEA ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.PLEASE READ AND SAVE THIS USE AND CARE BOOK.IMPORTANTE / IMPORTANTLAVE LA JARRA ANTES DEL PRIMER USOWASH CARAFE BEFORE FIRST USE!Modelo/Model DCM525Accesorios/Partes (EE.UU/Canadá)Accessories/Parts (USA/Canada)1-800-738-0245USA/Canada 1-800-231-9786Mexico 01-800-714-2503www.blackanddecker.comCafet …

Comments, Questions and Opinions: