Manualios.com

Fracino PID 2 Operation & User’s Manual

Fracino PID 2 Manual Online:

4.5, 621 votes
Fracino PID 2 User Manual
Fracino PID 2 User Guide
Fracino PID 2 Online Manual

Text of Fracino PID 2 User Guide:

  • Fracino PID 2, TECHNICAL MENU 35. FILLING TIME OUT: Sets the time, in minutes, before the time out allarm will sound when the steam boiler is filling, the time out can be set between 10-250 seconds. OFF FillingUp T-Out 240 36. WATER FILTER: Sets the volume of water in Litres before the water filter needs replaced, the volume can be set between 0 and 5000 Litres. WARNING: The hardness of the water supply and usage of the machine will determine frequency of replacing the water filter, failure to replace the water filter at the correct time my void the warranty. OFF Water Filter 5000 USER USER 26

  • Fracino PID 2, PROGRAMING HOT WATER MEASURES Programming Hot Water Measures T o GR1 T o GR2 T o GR3 DOSES SETTING SEL...... MAX MIN HH:MM DAY T o BOILER K1GR1 K2GR1 K3GR1 K4GR1 K5GR1 K6GR1 1. The duration of the hot water dispensing can be adjusted using the left hand key pad 1 2. Place a cup, teapot or measuring jug on the drip tray grid under the hot water nozzle 5 Seconds 3. Press and hold the star button for 5seconds until the scroll menu reads: “doses setting select with in 30sec” 2 WARNING: Do not hold the

  • Fracino PID 2, DISPLAY AND KEYPAD OVERVIEW T o GR1 T o GR2 T o GR3 FRACINO ROMANO MAX MIN HH:MM DAY T o BOILER 1 2 3 7 4 8 5 6 Display Normal Operation 1. Group 1 Temperature o C 2. Group 2 Temperature o C 3. Group 3 Temperature o C 4. Steam Boiler Temperature o C 5. Time 6. Day 7. Steam boiler water level indicator 8. Scrolling menu bar Keypad Group 1 K1GR1 K2GR1 K3GR1 K4GR1 K5GR1 K6GR1 K1GR1 K2GR1 K3GR1 K4GR1 K5GR1 K6GR1 PRIMARY FUNCTION SECONDARY FUNCTION Single Espresso Single Cappuccino Double Espresso Double Cappuccino Manual Override Hot Water Dispense Scroll up wh

  • Fracino PID 2, CLEANING K1GR1 K2GR1 K3GR1 K4GR1 K5GR1 K6GR1 1. Every day the backwashing process must be repeated using Fracino liquid quartz detergent to reduce the build up of coffee in the groups and solenoid valves. Fracino liquid quartz can be purchased through your dealer or from fracino direct, part no. DET/LIQUID. 1 5. When the required amount of water has been dispensed press the hot water button again to stop, the measure is now programmed press and hold the star button for 5seconds then press the star button to cycle through the menu options until you are out of the programing mode, alternitively wai

  • Fracino PID 2, FULL FACTORY RE-SET T o GR1 T o GR2 T o GR3 MAX MIN T o BOILER Preset valori completato Ensure the machine is turned off at the mains power switch press and hold the single espresso, double espresso and star button on the group 1 keypad then turn the power switch on whilst still holding the 3 keypad buttons, keep them pressed for 3 seconds until the display read the following Turn the mains switch off, wait 3 seconds then turn the machine back on, the machine will start up in its default mode, to function correctly all setting will need to be re-entered. WARNING: Performing the procedures below will r

  • Fracino PID 2, SERVICE ALARMS Service Alarm T o GR1 T o GR2 T o GR3 Service 0121 328 5757 MAX MIN T o BOILER T o GR1 T o GR2 T o GR3 FRACINO ROMANO MAX MIN T o BOILER If the spanner symbol appears with the “Service” in the Scroll menu the machine requires a routine service, contact Fracino or a local service agent to have the machine serviced. To change the number of cycles required before the service alarm soundes, see section 25 in the Technical section. WARNING: The service counter should only be re-set when the machine has been serviced. 15 Press and hold Turn on Turn off The service counter alarm is re-set by turning the machine off using the mains on/off switch pre

  • CLOCK AND AUTO ON/OFF Auto ON/OFF T o GR1 T o GR2 T o GR3 FRACINO PID MAX MIN T o BOILER K1GR1 K2GR1 K3GR1 K4GR1 K5GR1 K6GR1 1 1. Press the double espresso button the hour should be flashing, use the espresso (+) and Cappuccino (-) button to change to the require time, press the double espresso button to scroll to the minute and adjust as required. 1 Auto ON/OF

  • Fracino PID 2, START UP Initial start up 1 1. On the initial start-up, immediatly after installation, turn the machine on using the black rocker switch on the fornt panel behind the right hand steam tube, the blue light should illuminate indicating the power is on. The display and keypads should illuminate. 20 o C 20 o C 20 o C FRACINO PID MAX MIN 09:00 MONDAY 20 o C 2. After a second or two the boiler will begin to fill, this is indicated on the boiler water level indicator on the display, the water level can also be observed on the sight glass on the

  • Fracino PID 2, TURNING OFF GROUPS 2 Turning off individual groups 1. Individual groups can be turned of to save energy and prolong the life of the elements when they are not in use. Note that the groups will require at least 10minutes to heat up. 2. To turn the a group off use the corresponding keypad, press the star button and cappuccino button simultaneously. The display will show “OFF” in the group temperature readout. 2. The group can be turned on by pressing the star and double cappuccino single cappuccino button simultaneously, the “OFF” will disappear and show the group temperature. OFF 20 o C 20 o C FRACINO PID MAX

  • CLOCK AND AUTO ON/OFF Changing Clock T o GR1 T o GR2 T o GR3 FRACINO PID MAX MIN T o BOILER K1GR1 K2GR1 K3GR1 K4GR1 K5GR1 K6GR1 1 5 Seconds 1. To change the time on the clock, press and hold the star button for 5seconds to enter the programming mode, remove finger from star button then press the star button for a further 2 seconds, to enter the second

  • Fracino PID 2, TROUBLESHOOTING Over Temperature on a Group Boiler T o GR1 T o GR2 T o GR3 Alarm Temper. Group X MAX MIN T o BOILER CAUSE: The temperature in group “X” has risen above 140 o C, possibly caused by a fault in the group temperature probe and/or a fault with the group high limit thermostat. SOLUTION: Contact Fracino or a local service agent. ! Temperature Probe on Group Boiler Disconnected T o GR1 T o GR2 T o GR3 ProbeUnconnectGroup X MAX MIN T o BOILER ! CAUSE: The temperature probe on group “X” has been disconnected or has developed a faul

  • Fracino PID 2, TECHNICAL MENU Entering Technical Menu WARNING: Modifing the settings in the Technical Menu can may cause temperature instability in the groups and/or cause the machine to function incorrectly, settings must only be modified by trained persons. Service callouts to reset/reprogram settings maybe fully charge-able. OFF DAY 1 HH:MM 1. To enter the technical menu, first turn the machine to stand-by mode, by pressing the star and double espresso buttons on group 1 simultaneously. 2. Press and hold the star button for 10 seconds until the Technical Menu appears. 2 10 Seconds OFF DISPLAY MODE reverse USER The “USER” symbol in this section denotes the features/settings that can be changed

  • Fracino PID 2, SERVICE ALARMS Water Filter Alarm T o GR1 T o GR2 T o GR3 ChangeWaterFilter MAX MIN T o BOILER T o GR1 T o GR2 T o GR3 FRACINO PID MAX MIN T o BOILER If the spanner symbol appears with the “Change Water Filter” in the Scroll menu the water filter needs to be replaced, contact Fracino or your local service agent to have the filter replaced. To change the volume of water that can pass through the machine before the water filter alarm comes on, see 36 in the “Technical” section. The water filter counter alarm is re-set by turning the machine off using the mains on/off switch pressing and holding the double espresso and

  • Fracino PID 2, PROGRAMMING COFFEE MEASURES Programming Coffee Measures T o GR1 T o GR2 T o GR3 DOSES SETTING SEL...... MAX MIN HH:MM DAY T o BOILER K1GR1 K2GR1 K3GR1 K4GR1 K5GR1 K6GR1 1. The coffee measures are programmed from the left hand keypad, when complete the settings are stored on all groups. If required each group can be programmed individually by using the same proceedure using the corresponding group and keypad. 1 2. Put a single shot of coffee (7-8grams) in to a single filter, insert filter in to the

  • Fracino PID 2, TECHNICAL MENU 19. PROBE SENSITIVITY: Selects the sensitivity of the level probes use the + and - buttons to select between “LOW”, “MED” and “HIGH” 21. NUMBER OF GROUPS: Selects the number of groups are on the machine, select- ing “0” will disable all of the groups. OFF ProbeSensitivity HIGH 20. LED IDLE: When Enabled the buttons will not be illuminated until selected, when disabled all the buttons will be illuminated until selected, when selected the selected button will flash. OFF LED idle disable OFF Crono Grp 2 22. STEAM BOILER HEAT.: Selects the method of controlling the s

  • Fracino PID 2, TECHNICAL MENU 32. OFFSET TEMPERATURE: The group temperature is measured by a temperature probe in the group boiler, this temperature is displayed in the main display and corre- sponds to the group temperature set point. When dispensing the water flows from the group boiler, through the group solenoid which can reduce the temperature of the coffee in the filter, the Off Set temperature compensates for this cooling effect. 33. GROUP BOILER PID SETTINGS: Changes the kP, kI and KD parameters on the PID system OFF Offs Tset Coffee 6 o C OFF kP kI kD 1.2 0.0 4.0 34. PID SETTING: Adjusts the temperature range for the PID system OFF PID

  • Fracino PID 2, START UP 3. Immediatly after the boiler has filled press the star button on each group until water appears from the bottom of the groups - this is to ensure the heat exchangers and group boilers are full of water. 40 o C 40 o C 40 o C FRACINO ROMANO MAX MIN 09:00 MONDAY 35 o C 4. After filling the boilers will start to heat, this is indicated on the groups by the heating element symbol, which appears on the group temperature readout this symbol will appear when the group heating element is on, as the group approaches its set temperature it will begin to pulse until the set point is reached, it will then pulse to maintane the set point te

  • Fracino PID 2, TECHNICAL MENU 28. STEAM BOILER PID PARAMETERS: These settings are redundant on the Fracino Romano PID. 30. HEATING GROUP: This is to allow the same temperature to be set on all groups, for example setting to 1 on a 2 group machine will only allow one group temperature to be set. OFF kP kI kD 0.0 0.0 0.0 29. STEAM BOILER PID SETTING: This setting is redundent on the Romano PID. OFF PID settings 0 o C OFF Heating Group 2 31. GROUP TEMPERATURE: Used to set the set point temperature for each individual group. The temperature range for the set point temperature is 85 - 125 o C in steps of 1 o C. WARNING: The maximum set point temper

  • TECHNICAL MENU 7. LANGUAGE: Changes the langauge of the display and menus, options are English, Italian, German and Spanish, use + and - to cycle through. 9. SERVICE PHONE: Gives the phone number of Fracino or Fracino Service Agent, use + and - to change numbers and Enter to select number, Press Select to cycle to next menu. OFF Language english 8. NAME: Allows the scroll menu on

Related Products and Documents (Coffee Maker):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Silva MAP MEASURER PLUS Operation & user’s manual silva/map-measurer-plus-38K.pdf 05 May 2023 2 0.74 Mb
2 Conair SuperClipper HC1100LIC Instruction booklet conair/superclipper-hc1100lic-N29.pdf 29 Jan 2024 2
3 Videology D4T7L3.6IR Series Instruction manual videology/d4t7l3-6ir-series-2YF.pdf 11 Dec 2022 2
4 Weslo QVRX10170 Operation & user’s manual weslo/qvrx10170-C8N.pdf 16 Aug 2022 12 1.45 Mb
5 Craftsman 580.327060 Owner's manual craftsman/580-327060-CZ8.pdf 17 Oct 2022 26 1.6 Mb
6 ClearSounds Portable Telephone Amplifier Operation & user’s manual clearsounds/portable-telephone-amplifier-D59.pdf 07 Sep 2022 10 0.75 Mb

Similar Resources:

  • Siemens

    TE503201RW

    (128 pages)
    Instruction manualMode d‘emploiGebruiksaanwijzingInstrukcja obsługiNávod k použitíИнструкция по эксплуатацииen Englishfr Françaisnl Nederlandspl Polskicz Češtinaru РусскийTE503...RW …
  • West Bend

    Electric Hot Pot

    (16 pages)
     2010 West Bend®, a Brand of Focus Electrics, LLC. www.focuselectrics.com ELECTRIC HOT POT Instruction Manual Register this and other Focus Electrics products through our website: www.registerfocus.com Important Safeguards ............................................................................................... 2 Before Using for the First Tim …
  • Bunn

    CWTF 4/2 Twin

    (2 pages)
    FeaturesRelated ProductsITEM#PROJECTDATEFor current specification sheets and other information, go to www.bunn.com.Patents ApplyEasy Clear® EQ-17-TL Product No. : 30200.1000 Dimensions: 127⁄16" H x 21⁄2" W x 3" D31.6 cm H x 6.35 cm W x 7.62 cm DEasy Clear® ED-17-TL Product No. : 30201.1001 Dimensions: 81⁄4" H x 25⁄16" Dia. …
  • Proline

    CBE16

    (48 pages)
    COMBI ESPRESSO COFFEE MACHINE COMBINE ESPRESSO CAFETIERE CAFETERA EXPRESSO ESPRESSO KOFFIEMACHINE Downloaded from www.vandenborre.be …
  • Nuova Simonelli

    MYTHOS Plus BE Series

    (5 pages)
    ©McDonald’s Corporation · Planned Maintenance Manual · Revised December 2012 Hazards These icons alert you to a possible risk of personal injury. Equipment alerts Look for this icon to find information about how to avoid damaging the equipment while doing a procedure. Tips Look for this icon to find helpful tips about how to do a procedure. EQUIPM …
  • Hamilton Beach

    47451

    (32 pages)
    BrewStation® Deluxede lujoEnglish ...................... 2Français .................. 12Español .................. 22READ BEFORE USELIRE AVANT UTILISATIONLEA ANTES DE USARQuestions? Please call us – our friendly associates are ready to help.USA: 1.800.851.8900¿Preguntas?Por favor llámenos – nuestrosamables representantes están listos para ayudar.ME …

Comments, Questions and Opinions: