Manualios.com

Airlink101 AICAP650 Quick Installation Manual

Airlink101 AICAP650 Manual Online:

3.05, 1403 votes
Airlink101 AICAP650 User Manual
Airlink101 AICAP650 User Guide
Airlink101 AICAP650 Online Manual

Text of Airlink101 AICAP650 User Guide:

  • Section 1 Getting Started System Requirement: Before you begin, please review the following system requirement. • OS: Windows® 98SE/ME/2000/XP and other OS supporting TCP/IP • CPU: 650MHz or above (2.4 GHz recommended when monitoring multiple cameras simultaneously) • Memory Size: 256MB • Resolution: 1024x768 or above • Web Browser: Internet Explorer 5.0 or above This Quick Insta

  • Airlink101 AICAP650, Step 3 Power on the IP Camera by connecting one end of the supplied power adapter to the power jack of the Camera and connecting the other end to an electrical outlet. Step 4 Verify that the LED lights on the Camera are lit. If not, verify that all the connections are secure and try again. Step 2 Connect one end of a network cable to the IP Camera and connect the other end to one of the LAN ports of the router or switch.

  • Airlink101 AICAP650, Section 2 Installing the Setup Wizard Step 1 Insert the provided CD and wait for the autorun screen to appear. Step 2 Click on Install Setup Wizard. Note: If the autorun screen does not appear automatically, go to Start > Run > and type D:\Setup\Setup.exe (where D is the letter of your CD drive) and click OK. Step 3 Click Next.

  • Airlink101 AICAP650, Section 3 Using the Setup Wizard Step 1 Go to Start > (All) Programs > AirLink101 IP Camera Setup Wizard > AirLink101 IP Camera Setup Wizard. Step 2 Select the IP Camera you want to configure from the list and click on the Wizard button.

  • Airlink101 AICAP650, Step 3 If the Camera’s default IP address is on a different subnet, the following message will appear. Click Yes to continue. If you do not receive this message, skip to Step 6. Step 5 The Wizard will automatically generate an IP address for the camera, if this address is not in use by any other device in your local network, click OK. Otherwise, enter an available IP address (ex. 192.168.x.240) and click OK. Step 4 Enter admin for both the Admin ID and Password and click OK.

  • Airlink101 AICAP650, Step 6 Enter admin for both the Admin ID and Password field and click Next. Optionally, you can change the password by checking on the Change box and entering the new password. Step 7 If you need to change the Camera’s IP address because another network device is already using the same address, you can assign a new address here and click Next. Step 8 Verify that all the fields are correct and click Restart to save the settings and reboot the camera.

  • Section 4 Viewing Images Step 1 At the Setup Wizard, select the desired camera from the list and click on the Web Config button. Step 2 Enter the password for the camera (Default is admin) and click OK. Note: The following steps describe how to view images from within the same local area network as the IP Camera. To view images from an external network such as the Internet, please re

  • Airlink101 AICAP650, Note: ActiveX must be installed and enabled on your Web Browser (Internet Explorer) before you can view the live videos. For more information, please refer to the next section. Step 3 The welcome page appears. If you did not change the default password, you will be prompted to do so before accessing the camera. Step 4 The Main menu along with the live video appears on screen. The IP camera is ready for use now.

  • Airlink101 AICAP650, Section 5 Enabling and Installing ActiveX If no image appears on the web browser (Internet Explorer), follow the steps below to enable and install ActiveX. Step 1 Open Internet Explorer and go to Tools > Internet Options. Step 2 Select the Security tab and click on Custom Level.

  • Step 3 Verify the following settings are selected. Click OK when done: • Automatic prompting for ActiveX controls: Enable • Download signed ActiveX controls: Prompt • Run ActiveX controls and plug-ins: Enable Step 4 Close Internet Explorer and re-launch the Web Config screen.

  • Airlink101 AICAP650, Step 5 Click on the ActiveX Control prompt. Step 6 Select Install ActiveX Control. Step 7 Click on Install to install the ActiveX Control. Step 8 After the ActiveX Control is installed you should see the live video on Internet Explorer.

  • Airlink101 AICAP650, * Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. Specifications are subject to change without notice. All products and trademarks are the property of their respective owners. Copyright ©2006 AirLink101™

Related Products and Documents (Webcam):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 LG LW5200ER Owner's manual lg/lw5200er-6DW.pdf 25 Feb 2024 13
2 Allied Telesis AT FH812U AT-FH812U AT-FH812U Installation manual allied-telesis/at-fh812u-at-fh812u-at-fh812u-L12.pdf 10 Jan 2023 36 1.62 Mb
3 Multitone 5020 Operation & user’s manual multitone/5020-96J.pdf 01 Aug 2022 70
4 Meaco 12L Instruction manual meaco/12l-41H.pdf 21 Feb 2023 18
5 Philips FWM570/19 Operation & user’s manual philips/fwm570-19-UBC.pdf 17 Nov 2022 26
6 Moxa Technologies MGate MB3660-8-2AC Quick installation manual moxa-technologies/mgate-mb3660-8-2ac-JJ3.pdf 14 Jan 2024 2

Similar Resources:

  • Logitech

    C120

    (2 pages)
    Quick-start guideChoose your installLogitech recommends installing both your webcam and Logitech Vid software. If you do not want Logitech Vid, please pick another type of installation and skip to step 8.Tip: If you choose not to install Logitech Vid, making a video call will require downloading and installing third-party software.Your webcam comes with Logi …
  • Logitech

    960-000111 - Quickcam Orbit AF Web Camera

    (2 pages)
    English1. Webcam 2. Carl Zeiss optics with autofocus3. Activity light4. Microphone5. Base6. 9” (22.9 cm) eye-level stand7. USB cable8. Webcam software9. Quick-start guideEspañol1. Cámara Web 2. Componentes ópticos Carl Zeiss con enfoque automático3. Diodo de actividad4. Micrófono5. Base6. Soporte de 22,9 cm para poner la cámara a la al …
  • Genius

    E-MESSENGER 112

    (71 pages)
    English i Table of Contents e-Messenger 112 Features 1 Installing the e-Messenger 112 2-3 About Genius Application-WebCAM Mate 3 1. Main Menu 4-9 2. Picture Mode 10-12 3. Video Mode 13-14 4. Security Mode 14-17 Using MSN Messenger,Yahoo Messenger,AOL 17-19 CrazyTalk Avatar Creator 19-41 CrazyTalk CamSuite 42-69 Trouble shooting for web camera 70 …
  • Lorex

    DMC2161

    (4 pages)
    Page 1DMC2161 (R2)WWW.LOREXCCTV.COMSystem ContentsEnsure your computer is connected to the Internetin order for you to obtain any program updates.Insert the mCAM Application Software CD into your computer’sCD-ROM drive. Follow the instruction dialog boxes to guide youthrough the installation process.Note: You will need to accept the License Agreement2* Thi …
  • Canon

    iP100 - PIXMA Color Inkjet Printer

    (22 pages)
    (1/22) R2 Confidential iP100 Technical Reference This manual provides technical information necessary for servicing the applicable product. Since the manual contains confidential information, limit the use of this manual within the sales companies. Information on maintenance and disassembly / reassembly procedures of the applicable product is give …
  • Canon

    VC-C1

    (1 pages)
    UKJcoCONTACT INFORMATIONCanon U.S.A., Inc.Video DivisionOne Canon PlazaLake Success, NY 11042TEL: (516) 328-5000CanonVIDEO DIVISIONDOCUMENT #4103Page 1 of 1 as of May, 2001Pin Assignments for CanonVC-C1, VC-C1 MKII, VC-C3, VC-C4, RE-350, DZ-3600U, VB-101cCamera's …

Comments, Questions and Opinions: