Manualios.com

Airlink101 AWLH3025 Operation & User’s Manual

Airlink101 AWLH3025 Manual Online:

4.7, 1885 votes
Airlink101 AWLH3025 User Manual
Airlink101 AWLH3025 User Guide
Airlink101 AWLH3025 Online Manual

Text of Airlink101 AWLH3025 User Guide:

  • Airlink101 AWLH3025, INSTALLATION Caution: Be sure to power off your computer before inserting the PCI adapter. Install the Driver & Utility Step 1 Insert the PCI adapter into an available PCI slot and turn on your computer. Step 2 Windows will detect the adapter and request for a driver. Click Cancel to quit the wizard and insert the Installation CD into your CD drive. Step 3 Select Install Utility from the setup menu. Note: If the setup menu does not appear automatically, click Start, Run, type D:\autorun.exe (where D is the letter of your CD drive) and click OK. - 4 -

  • Airlink101 AWLH3025, - 2 - You can also use one computer as an Internet Server to connect to a wired global network and share files and information with other computers via a wireless LAN. The Access Point Network (a.k.a. Infrastructure) The network installation allows you to share files, printers, and Internet access much more conveniently. With the Wireless LAN Card, you can connect wirelessly to a wired global network via an access point or wireless router.

  • Airlink101 AWLH3025, saved, select the profile from the pull-down menu and then click the Load button. Tx Power Level Select the transmit power level: Low Power, Medium-Low Power, Medium Power, Medium-High Power, High Power. The power level function is used to extend the communication distance. Fragment Threshold You can fragment the MSDU or MMPDU into smaller sizes to increasing the reliability of frame transmission. (The maximum value of 4096 means no fragmentation is needed). The throughput performance will decrease however. RTS Threshold This value should remain at its default setting of 4096. Should you encounter inco

  • Airlink101 AWLH3025, Table of Contents INTRODUCTION...................................................................................... 1 WIRELESS NETWORK OPTIONS ................................................................. 1 The Peer-to-Peer Network (a.k.a. Ad-Hoc).................................. 1 The Access Point Network (a.k.a. Infrastructure) ........................ 2 LED INDICATORS FOR WIRELESS NETWORK ADAPTER CARD ................. 3 Power Indicator: (Green LED)..................................................... 3 This LED will il

  • Airlink101 AWLH3025, - 3 - LED Indicators For Wireless Network Adapter Card Power Indicator: (Green LED) This LED will illuminate when the driver is installed. Act Indicator: (Green LED) This LED flickers when the Wireless Network Adapter is transmitting/receiving data.

  • Airlink101 AWLH3025, - 12 - Main Tab The Main tab displays the current status of the Wireless Network Adapter. Item Description External Configuration Uncheck the box to use this utility to configure the wireless network adapter. Or check the box to use Windows XP’s Wireless Zero Configuration Utility. Status Displays the information about the status of the communication. SSID The SSID is the Network ID shared among all devices in your wireless network. The name must be identical for all devices and points attem

  • Airlink101 AWLH3025, REGULATORY STATEMENTS FCC Certification The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have established certain rules governing the use of electronic equipment. Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interface, and 2) This device must accept any interface received, including interface that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro

  • Airlink101 AWLH3025, INTRODUCTION The 802.11g Wireless LAN Card is a device that allows you to connect your computer to a Wireless Local Area Network (WLAN). A wireless LAN allows your system to use wireless Radio Frequency (RF) technology to transmit and receive data without having to physically attach to the network. The wireless protocols that come with this product ensure data security and isolation from interference generated by other radio frequencies. This card also allows you to take full advantage of your computer’s mobility with access to real-time information and online servi

  • Airlink101 AWLH3025, devices in order to establish a connection. KEY1 ~ KEY 4:You can specify up to 4 different keys, but only one can be used at a time. Encryption:Enter the key value in this field. A key of 10 hexadecimal characters (0-9, A-F) is required if a 40-bit (a.k.a. 64-bit) Key Size is selected. A key of 26 hexadecimal characters (0-9, A-F) is required if a 128-bit Key Size is selected. A key of 58 hexadecimal characters (0-9, A-F) is required if a 256-bit Key Size is selected. Key size Select from 40-bit (a.k.a. 64-bit), 128-bit or 256-bit. 802.1x Con

  • Airlink101 AWLH3025, - 5 - Step 4 When the Welcome screen appears, click Next . Step 5 Click Next to accept the default destination folder to install the software or click Browse to manually select a different destination folder. Step 6 Click Next at the Select Program Folder screen.

  • - 14 - Preferred SSID Type in the SSID name of the device you want to connect to. BSS Type You can select the connection type: Peer-to-Peer, Access Point or Auto Mode. Tx Rate You can select the data rate or set to auto mode from the pull-down menu. Channel Select the channel you want to use. Power Mode No Power Save:the adapter will be in full active m

  • - 9 - 4. Click Finish to complete the installation. Verify Device Installation To verify that the driver has been properly installed in your computer, go to Start Æ Settings Æ Control Panel Æ System (Æ Hardware) Æ

  • Item Description - 13 - For TI-Based WLAN with encryption Mode Displays the type of connection: Access Point or Peer-to-Peer. Ch Displays the channel that is currently in use. Signal Displays the signal strength of the connection between the Wireless Network Adapter and the Access Point it connects to. BBS ID Displays the MAC address of the ta

  • Airlink101 AWLH3025, - 19 - Privacy Mode Configure WEP, CCX, 802.1x and WPA settings. NONE:No security defined. WEP is a data security mechanism based on a 40 Bit (a.k.a. 64 Bit)/128 Bit/256 Bit shared key algorithm. WPA(WiFi Protected Access)is more secure than WEP, and should be used if possible. CCX( Cisco Compatible Extension)provides user-based, centralized authentication, as well as per-user wired equivalent privacy (WEP) session keys. Press the Configure button to change CCX configuration. The 802.1x Configuration window is used to configure WEP, CCX and WPA security with 802.1x authentication.

  • Airlink101 AWLH3025, - 23 - 802.1x: EAP-TLS EAP-TLS is a mutual authentication method, which means that both the client and the server prove their identities. LEAP Network administers have been taking advantage of the simplified user and security administration that LEAP provides. Before the security authentication is started, you should enter the user name and password or the authentication process will fail. WPA settings Preshared Key Passphrase: Enter the key that you are sharing with the network for the WLAN connection.

  • Airlink101 AWLH3025, - 18 - Privacy Tab Use the Privacy Tab to configure your WEP, CCX and WPA settings. WEP (Wired Equivalent Privacy), CCX ( Cisco Compatible Extension)and WPA(WiFi Protected Access)encryption can be used to ensure the security of your wireless network. Highlight WEP and click on the Configure button. If you uncheck External Configuration in the Main tab, functions in the following figure will be enabled. If you checked External Configuration in the Main tab, functions in the following figure will be disabled.

  • Airlink101 AWLH3025, - 7 - Install the device Note: Make sure the procedures in “Install Utility” have been performed. In most cases, Windows will automatically install the driver after the computer is restarted, if the Found New Hardware Wizard appears, follow the steps below. Note for Windows 98 & ME users: Before installing the device, make sure you have your Windows 98 or ME CD at hand. You may be asked to insert the Windows 98 or ME CD in order to install specific files. Note for Windows 2000 users: During the installati

  • Airlink101 AWLH3025, - 20 - WEP Configuration None: Authentication The authentication type defines ID verification and access privileges of roaming wireless network cards. You may choose from Open System, Shared Key, or Auto Switch. Open System: If your access point/wireless router is using "Open System" authentication, then the wireless adapter will need to be set to the same authentication type. Shared Key: Shared Key is when both the sender and the recipient share a secret key. Auto Switch: Select Auto Switch for the adapter

Related Products and Documents (Network Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Robot Coupe R6N Specifications robot-coupe/r6n-U19.pdf 11 Oct 2023 2 0.11 Mb
2 Yamaha Hi-Hat Stand HS740 Owner's manual yamaha/hi-hat-stand-hs740-S14.pdf 16 Dec 2023 1 0.07 Mb
3 Leviton I 24 Installation and maintenance manual leviton/i-24-14J.pdf 11 Jan 2024 3
4 Pro-Form 831.29723 Owner's manual sears/831-29723-KEA.pdf 02 Jan 2024 16 1.15 Mb
5 Hitachi CP-X268A User's manual and operating manual hitachi/cp-x268a-Z14.pdf 09 Sep 2023 180 4.18 Mb
6 Honeywell T8624 Owner's manual honeywell/t8624-QT5.pdf 13 May 2023 57 0.57 Mb

Similar Resources:

  • TRENDnet

    TEW-226PC

    (23 pages)
    Copyright ©2004. All Rights Reserved. TRENDware International, Inc. TRENDnetTRENDware, USAWhat's Next in NetworkingTEW-226PCTEW-228PIVersion 10.25.0411 Mbps wireless adapterQuick Installation GuideGuide d'installation rapide de l'adaptateur sans fil 11 Mbps 802.11bKurzanleitung zur Installation des drahtlosen 11 MBit/s 802.11b Adapters Guí …
  • Texas Instruments

    VCA8500BOARD

    (17 pages)
    User's GuideSLOU216 – January 2008VCA8500BOARDThe Texas Instruments VCA8500BOARD evaluation module makes it easy to evaluate the performance ofthe TI VCA8500 variable gain amplifier. This user's guide provides a description of the evaluation moduleand its operation, schematic diagram, bill of materials, and the printed-circuit board layout.Conten …
  • Acces

    PCI-COM-1S

    (21 pages)
    10623 Roselle Street, San Diego, CA 92121 • (858) 550-9559 • FAX (858) 550-7322 [email protected] • www.accesio.com MODEL PCI-COM-1S USER MANUAL FILE: MPCI-COM-1S.Ca …
  • TRENDnet

    TE-16XP

    (2 pages)
    The TE16XP Plus Series High Performance Ethernet adapter features NE2000 compatibility, jumperless configuration, easy to use configuration/diagnostic software, and drivers for all popular network operating systems. In addition, industry standard NE2000 compatibility ensures operation with virtually all software in use today.The TE16XP Plus Series outperform …
  • Clarinet Systems

    ES608

    (4 pages)
    Clarinet Systems, Inc. Edition: 6/16/08, p1 ESB5001/5004 EthIR LAN™: Infrared Ethernet Access Point for mobile devices ESB5001 and ESB5004 are infrared to Ethernet access points for connecting PDAs or handheld computing devices to an Ethernet 10/100 Base-T network through the devices' IR ports running TCP/IP network protocol. ESB5001/5004 belo …
  • Panasonic

    MA2SP05

    (3 pages)
    1Publication date: March 2004 SKL00012BEDPIN diodesMA2SP05Silicon epitaxial planar typeFor high frequency attenuator■ Features• High performance forward current IF controlled forward dy-namic resistance rf• Small terminal capacitance Ct• Miniature package and surface mounting type■ Absolute Maximum Ratings Ta = 25°CUnit: mmParameter Symbol Rating …

Comments, Questions and Opinions: