Airlink101 AIC250W Operation & User’s Manual

Text of Airlink101 AIC250W User Guide:

• 20 Step 5 If you are connecting to a wireless router, verify that the Camera is set to Infrastructure mode. Enter the SSID (Network Name) of your wireless router in the SSID field, or use the Drop-down menu directly below the SSID field to choose your wireless router. Note: You can also click on the Site Survey button to view all nearby wireless networks. If you

• Airlink101 AIC250W, 9 5. Using the Setup Wizard Step 1 Go to Start > (All) Programs > AirLink101 IP Camera Setup Wizard. Step 2 Select the IP Camera you want to configure from the list and click on the Wizard button.

• Airlink101 AIC250W, 70 Week Mode Select the desired camera from the drop-down menu. Specify the Start and Stop time for each week and click on the Days of the week that you want to record and click Add. Click Save to apply the changes. At the Record Button, select Schedule Record. Recording will begin at the scheduled time.

• Airlink101 AIC250W, 4 1. Introduction Congratulations on your purchase of this SkyIPCam 250W. The IP Camera allows you to view images and live videos from internal and external networks. With a built-in CPU and Web Configuration Utility, the IP Camera is a standalone network device that delivers high quality videos at a low cost of ownership. The built-in Web Configuration Utility allows any computer that’s connected to the network to remotely manage the IP Camera. Combined with the bundled Setup Wizard and IPView

• Airlink101 AIC250W, 10 Step 3 If the Camera’s default IP Address is on a different subnet, the following message will appear. Click Yes to continue. Note: If you do not receive this message, skip to Step 9. Step 4 Enter admin for both the Admin ID and Password and click OK. Step 5 In the IP Address field, change the first three numbers to match your local network address. For example: If your computer’s IP Address is 192.168.2.100, change the first three numbers to 192.168.2 as well but leave the last number 240 alon

• Airlink101 AIC250W, 14 WEP Step 13a Select the same Encryption Mode (64 Bit / 128 Bit), Key Format (HEX / ASCII), Default Key (Key_1 ~ Key_4), and enter the same WEP keys (passwords) as your wireless network in the appropriate field and click Next. Skip to Step 15. WPA-PSK Step 13b Select the same Key Format (HEX / ASCII) and enter the same Pre-Shared Key (passphrase) as your wireless network and click Next. Skip to Step 15.

• Airlink101 AIC250W, 56 10.3.1 Status Mode Window The Status Mode Window displays a list of cameras that are added to IPView Pro as well as the status of each selected camera. Select the desired camera from the list then click on the Change Status Mode button to view the status of the camera.

• Airlink101 AIC250W, 28 8.2.1 Configuration – System The Configuration – System page allows you to configure the System Settings of the Camera. Camera Name: You can assign a user-friendly name for the camera. Location: Enter the location of the camera. Admin ID: Specify a username for the Admin account. Admin Password: Specify a password for the Admin account. LED Control: Normal: Both Pwr and Lnk LEDs are ON. When LAN activity is present, Lnk will flash. OFF: Both Pwr and Lnk LEDs are OFF. D

• Airlink101 AIC250W, 82 Step 7 At the bottom of the page, check on the Enable upload video to FTP server check box and click Save to apply the changes. Step 8 Go to Configuration – E-mail and enter your E-mail settings in the applicable fields. Step 9 At the bottom of the page, check on the Enable e-mail video to e-mail account check box and click Save to apply the changes.

• Airlink101 AIC250W, 57 Use the Camera Buttons to control the camera’s various functions. From left to right: Connect/Disconnect: Connects or disconnects the video signals from the selected camera. Rotate Image Angle: Rotates the angle of the video. Snapshot: Takes a snapshot image of the current video. When you click on this button, a window will appear asking you to specify the image name and the save location. Audio: Disabled for this model. Zoom Mode: Adjusts the zoom setting of the camera.

• Airlink101 AIC250W, 42 8.3.6 Tools – Backup The Tools – Backup page allows you to Backup and Restore the Camera’s settings. To backup the Camera’s settings to your computer, click on the Backup button. A window will appear asking for the save location. The settings will be saved as Config.bin To restore the saved settings, click on the Browse button, browse to the saved file, and click on the Restore button. 8.4.1 Help – About The Help – About page displays the Camera’s current

• 38 8.2.8 Configuration – E-mail The Configuration – E-mail page allows you to configure the E-mail Settings of the Camera. E-mail Account: Enter the information for your SMTP E-mail account that you want to e-mail the images to. Time Schedule: You can setup a time schedule to always e-mail or periodically e-mail images to the designated e-mail account. Man

• Airlink101 AIC250W, 6 3. Installing the Setup Wizard Step 1 Insert the provided CD and wait for the autorun screen to appear. Step 2 Click on Install Wizard. Note: If the autorun screen does not appear automatically, go to Start, Run, type D:\autorun.exe (where D is the letter of your CD drive) and click OK. Step 3 Click Next.

• Airlink101 AIC250W, 11 Step 6 Enter the Subnet Mask and Gateway fields with exactly the same values as you got from running ipconfig. Click OK to continue. Step 7 After the Camera has restarted, click the Exit button to close the Setup Wizard. Step 8 Start the Setup Wizard again and make sure the Current IP Address field displays the new IP Address. Select the Camera and click on the Wizard button.

• Airlink101 AIC250W, 41 8.3.5 Tools – Firmware Upgrade The Tools – Firmware Upgrade page allows you to upgrade the Camera firmware. You can check our website at www.airlink101.com to see if there is a newer firmware available for download. Step 1 Download the new firmware from our web site at www.airlink101.com Step 2 Unzip the new firmware. Step 3 Click on the Browse button and locate the new firmware. Step 4 Click on the Upgrade button to begin the upgrade.

• Airlink101 AIC250W, 66 10.4.6 Mail Configuration The Mail Configuration page allows you to specify the recipient of the E-mail alert when motion is detected and the Send e-Mail option is selected. Mail Server: Enter the IP Address of the Mail Server that is used to send your e-mail. Mail From: Enter the sender’s e-mail address. Mail To: Enter the recipient’s e-mail address. Subject: Enter the title of the e-mail. User Name: Enter the user name for logging into the Mail Server. Password: Enter the password for logging into the Mail Server. Interval Time: Enter the time interval (in seconds) to send e-mail regularly. Click Save to apply the changes.

More Instructions:

Airlink101 AIC250W Quick installation manual 27-06-2023 19

DOWNLOAD

Related Products and Documents (Security Camera):

Comparable Devices:

Similar Resources:

• Pegasus PDCHRDN-700AI (16 pages) Indoor Dome CameraUser Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ZEIM-4000511G 447 A.1 …

• Moog Pressurized FusionDome PFDW75C2NAX (10 pages) Moog Inc. Sensor and Surveillance Systems3650 Woodhead Drive Northbrook, IL. USA 60062 +1.847.498.0700 Fax: +1.847.498.1258 www.moogS3.comPFDW75C2NAXPressurized FusionDome™ Network Outdoor Wall Mounted Camera EnclosurePFDW75C2NAX......... Pressurized outdoor FusionDome, for Axis cameras, with WM20G gooseneck wall mount, clear dome, 24Vac input, heater a …

• Aztech WIPC409HD (2 pages) MODELWIPC409HDThis Easy Start Guide will help you setup your Aztech WIPC409HD to connect to your network for the first time. Before you continue with the installation ensure that your modem’s Internet connection is UP. This Easy Start Guide, along with the User Manual which provides a more advanced guide to this product, is included in the Resource CD an …

• HeroSpeed LongPlus (12 pages) Quick Start GuidePlease read the Quick Start Guide carefully before using the product and keep it.Related tools and documents of product, please download from www.herospeed.net …

• Digital Watchdog D2362DIR (24 pages) 5436 W Crenshaw St. Tampa, FL 33634Tel: 866-446-3595 / 813-888-9555Fax: 813-888-9262www.Digital-Watchdog.comtechnicalsupport@dwcc.tvTechnical Support Hours: Monday-Friday8:30am to 8:00pm Eastern TimeBefore installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference.ABOUT MANUAL01302012User ManualD2362DIR, …

• Ikegami ISD-A15 (2 pages) As the newest addition to the Ikegami Hyper Dynamic Camera Series, Model ISD-A15 features an extremely wide light dynamic range, high sensitivity and high resolution enabled by a 1/3-inch Pixim Seawolf sensor and Ikegami's digital processing technology. It is a Hyper Wide Light Dynamic Range Box Camera that reproduces a clear and natural image even in l …

Comments, Questions and Opinions: