DCA Intertel MP2005 Operation & User’s Manual

Text of DCA Intertel MP2005 User Guide:

• 2 DCA IntertelDCA Intertel V1.1 3 DCA IntertelDCA Intertel V1.1 V1.1 Table of Contans 1.Customer Care And Service 4 1.1 Warranty And Repair Service 4 1.2 Application Support 4 1.3 Notice 4 1.4 Warning 5 1.5 Limited Warranty 5 2. Description 6 2.1 Printer Overview 6 2.2 Printer Layout 7 3. Technical Specications 8 4. Installation 9 4.1 Unpackin

• DCA Intertel MP2005, 4 DCA IntertelDCA Intertel V1.1 5 DCA IntertelDCA Intertel V1.1 V1.1 1.Customer Care And Service 1.1 Warranty And Repair Service To obtain warranty or repair service please contact DCA Intertel at Phone: +31(0)172-604963 or Fax: +31(0)172-605237 for a RMA number and shipping instructions. 1.2 Application Support If you have any questions on operating the MP-2005 or require information on specic applications, please contact DCA Intertel. Phone: +31(0)172-604963 or Fax: +31(0)172-605237. 1.3 Notice The information contained in this document is subject to changewithout notice. DCA Intertel makes no waranty of any kind with regard to this material and sh

• DCA Intertel MP2005, 6 DCA IntertelDCA Intertel V1.1 7 DCA IntertelDCA Intertel V1.1 V1.1 2. Description 2.1 Printer Overview The MP- 2005 Mobile Printer is a ruggedized dot matrix printer designed specically for mobile and portable ap- plications. It can print in graphics mode along with diffe- rent character fonts, both in draft ( 150 cps ) and NLQ ( 25 cps ) mode. It has both tractor and friction feed me- chanisms and can print on multi-copy paper ( 1 original and up to 3 copies ). MP- 2005 is particularly suited for in vehicle applications, due to its compact size and reduced weight. Power re- qu

• DCA Intertel MP2005, 8 DCA IntertelDCA Intertel V1.1 9 DCA IntertelDCA Intertel V1.1 V1.1 3. Technical Specications Weight: 7 kg. Power: 11-14,0 Volts DC 85 mA Standby 2.5 A at medium print density Print: Impact Dot Matrix, 9 pins Bi-directional with logic seeking Paper Feed: Bi-directional, Sprocket and friction Copies: 1 original, 3 copies Speed: 150 cps Draft Paper Speed: 7 lines/second at 1/6” 13 lines/second continuous Print Width: 8.25” Paper Width: 8.93” pin to pin (sprocket) 3.5-8.5” tickets Dots/Line: 1920 Max Ch

• DCA Intertel MP2005, 10 DCA IntertelDCA Intertel V1.1 11 DCA IntertelDCA Intertel V1.1 V1.1 4.3 Printer Setup The MP-2005 can be congured by using the DIP-swit- ches as shown in Fig. 1. The function of the DIP-switches is depicted in Table 1. TABLE 1 - DIP SWITCHES Dip Switch Function SW 1-1 Baud rate (see Table 2) SW 1-2 Baud rate (see Table 2) SW 1-3 for serial interface: ON=XON/XOFF mode OFF=DTR/DSR mode SW 1-4 Character set SW 1-5 Character set SW 1-6 Character set SW 1-7 CRLF mode: ON = enabled OFF = disabled SW 1-8 STAND-BY mode: ON = enabled

• DCA Intertel MP2005, 12 DCA IntertelDCA Intertel V1.1 13 DCA IntertelDCA Intertel V1.1 V1.1 4.4 Caution! * Do Not print without inked ribbon or paper, since this leads to rapid printhead needle wear- out. * Do Not move the printhead manually. * Avoid mechanical shocks. * Before starting to print, check that the inked ribbon cartridge is correctly installed, the paper is loaded in the proper position and the printer’s upper swiveling part is locked to the lower one. * If the printer has worked for some time, avoid

• 14 DCA IntertelDCA Intertel V1.1 15 DCA IntertelDCA Intertel V1.1 V1.1 4.6 Indicators POWER ON This indicator lights when the printer is correctly powe- red. ON LINE Turns on when the printer is ready to accept data. If the ON LINE indicator ashes, the printer has switched to STAND- BY mode. PAPER END Comes on when the printer is out of paper. 4.7 Alarm and Indicator Functions T

• DCA Intertel MP2005, 16 DCA IntertelDCA Intertel V1.1 17 DCA IntertelDCA Intertel V1.1 V1.1 5.2 Power Source The MP-2005 requires a power source between: * 11.0 - 14,0 VDC * If the voltage drops below 10.5 VDC ( batteries drained ) the printer stops. CONTROLPANEL 5.3 Paper Loading MP-2005 can print on UNI A4/A5 size single sheet paper forms or multi part paper forms or continuous fan-fold paper with hole to hole spacing of 227mm (8.94”). The procedure for correct paper loading is the following: ● Set the printer OFF LINE ● Open the printer

• DCA Intertel MP2005, 18 DCA IntertelDCA Intertel V1.1 19 DCA IntertelDCA Intertel V1.1 V1.1 CAUTION If the printer has been printing for some time it is ad- visable not to touch the printhead during paper loading or inkribbon cartridge replacement, as it could be very hot. 5.4 Sensors A reective sensor is used on MP-2005 for determining the PAPER END condition. When this sensor detects the end of the currently printed sheet, the following actions take place: 1. printing stops. 2. the printer switches to OFF LINE

• DCA Intertel MP2005, 20 DCA IntertelDCA Intertel V1.1 21 DCA IntertelDCA Intertel V1.1 V1.1 5.6 Inked Ribbon Cartridge Installation and Replacement Cartridge installation/replacement procedure: ● Turn the printer off. ● Remove used cartridge by unlocking bottom latch and then rotating cartridge body upwards as shown by arrow D. ● Place ribbon extender on both studs B until it locks down, paying attention to the ribbon not disengaging from the extender itself. ● Gently move the cartridge body along the printing axis and seat i

• DCA Intertel MP2005, 22 DCA IntertelDCA Intertel V1.1 23 DCA IntertelDCA Intertel V1.1 V1.1 6. Interfaces 6.1 Appendix A: The printer comes with standard RS 232 Serial Interface PIN SIGNAL SIGNAL PIN 01 Carrier Detect Frame Ground 01 03 Transmit Data Receive Data 02 02 Receive Data Transmit Data 03 06 DSR-Data Set Ready DTR-Data Terminal Ready 04 05 Signal Ground Signal Ground 05 08 CTS-Clear To Send RTS-Request To Send 07 07 RTS-Request To Send CTS-Clear To Send 08 04 DTR-Data Terminal Ready DSR-Data Set Ready 06 09 (Not Connected) (Not Connected) 09 RS232 SERIAL INTERFACE CONNECTORS 6.2 Appendix B: CHARACTER SET ASCII 256 IBM DEC. HEX. Characters control key ASCII na

Related Products and Documents (Printer):

Comparable Devices:

Similar Resources:

• Dell 5230DN (4 pages) For more information on our products, visit dell.com/Printers High performance, robust and expandable monochrome laser printers for large workgroupsImprove workgroup productivity with these robust and flexible printers that make high performance monochrome laser printing aordable for mid to large organizations. The hardworking Dell 5230n and 5230dn deli …

• Sharp AM-400 (162 pages) DIGITAL MULTIFUNCTIONAL SYSTEMONLINE GUIDEMODELAM-4001. Installation2. Copying3. Sending Faxes4. Receiving Faxes5. Special Fax Functions6. Printing7. Scanning8. Printing Lists9. Maintenance10. Troubleshooting …

• Fujitsu fi-7480 (18 pages) fi-7480 / fi-7460 CONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS CG00002-293601 Version A fi-7480 / fi-7460 CONSUMABLE REPLACEMENT AND CLEANING INSTRUCTION fi-748PRB Imprinter …

• Minolta PAGEPRO EX (247 pages) iForewordThis manual explains the functions and operation of the MINOLTA ColorPagePro Ex printer. It also gives some troubleshooting tips as well asgeneral precautions to be observed when operating this printer.To ensure the best performance and effective use of your printer, pleaseread this manual carefully from cover to cover. After you have readthrough th …

• Brother HS-5000 (84 pages) English: CS-5xxx User’s Guide, Preliminary (TOC)Please read this manual thoroughly before using the printer.Brother Color PrinterHS-5000/5300User’s Guide Keep this manual in a convenient place for quick and easy reference at all times. …

• Epson 875DC - Stylus Photo Color Inkjet Printer (2 pages) Remove all tape and protective materials attached to the printer.Removing the ShippingMaterialsThe package contents may vary in certain locations.4011920-00xxxCopyright © 2000 by SEIKO EPSON CORPORATION Nagano, JapanPrinted in Japan 2000 xx.xx➀➂Next:See the reverse side of this sheet.* The power cord may come attached to the printer in certain locations …

Comments, Questions and Opinions: