EC Printer EC-520 Series Operation & User’s Manual

Text of EC Printer EC-520 Series User Guide:

• EC Printer EC-520 Series, EC-520 User’s Manual ESC 2 Set 1/6 inch line spacing Format: ASCII: ESC 2 Decimal: 27 50 Hex: 1B 32 [Description] Set the line spacing to 1/6 inch. ESC 3 Set n/144 inch line spacing Format: ASCII: ESC 3 n Decimal: 27 51 n Hex: 1B 33 n [Description] Set the line spacing to n/144 inch. n＝0~255. Default: n=24. ESC < Print head Returns to standby position Format: ASCII: ESC < Decimal: 27 60 Hex: 1B 3C [Description] This comma

• EC-520 User’s Manual TABLE OF CONTENTS Important Safety Instruction...................................................................................................................i Chapter 1 Overview................................................................................................................................1 1.1 Printer Types...................................

• EC Printer EC-520 Series, EC-520 User’s Manual Double click the file "Setup.exe" in the driver disc, install driver by the following direct. Hand operated installing way The flow of hand operated installing driver on windows 2000/XP/Vista/Win7 system as follows, another system's please refer to the User's Manual. 1.Click “Start” -->"Settings", select "Printers". 2.Click “Add Printer", then it will show a window of "Add Printer Wizard", click "Next", then please read the select direct carefully, Such as, select "Lo

• EC Printer EC-520 Series, EC-520 User’s Manual ESC J Print and feed paper Format: ASCII: ESC J n Decimal: 27 74 n Hex: 1B 4A n [Description] Print the data in the print buffer and feeds the paper by n/144 inch. If there is no content in buffer, the printer will feed paper directly without printing. ESC K Print and feed reversely Format: ASCII: ESC K n Decimal: 27 75 n Hex: 1B 4B n [Description] Print the data in the print buffer and feeds the paper by n/144 inch in the reverse directio

• EC Printer EC-520 Series, EC-520 User’s Manual 3.2 Printer Default Setting EC-520 9Pins Mini Printer V2.00 Have no Cut 200903110KY76F Black Mark setting： Invalid Print Direction： BI-DIR Paper Width： 76mm EC-520C 9Pins Mini Printer V2.00 Have Cut 200903110KY76F Black Mark setting： Invalid Print Direction： BI-DIR Paper Width： 76mm Figure 3-2 EC-520/C Default Setting ( Parallel and USB Interface ) EC-520 9Pins Mini Printer V2.00 Paper Width： 76mm EC-520C 9Pins Mini Printer V

• EC Printer EC-520 Series, EC-520 User’s Manual Figure 7-2 Figure 7-3 2. (1) When the distance L of the tearing/cutting position offset from the black mark is less than the inherent mechanical value L 0 of the printer (shown as figure 7-3), the calculation of tearing/cutting position offset is shown as follows: tearing/cutting position offset =（L 0 -L）/0.176 （dots number） (2) When the distance L of the tearing/cutting position offset from the black mark is greater than the inherent mechanical value L 0 of the printer (shown as figure 4),

• EC Printer EC-520 Series, EC-520 User’s Manual Chapter 3 Control Panel 3.1 Control Panel There are three LEDs and one key on the control panel as shown in Figure 3-1. Figure 3-1 Control panel 3.1.1 Indicator LEDs LED On Blinks Off POWER Power on —— Power off PAPER OUT Paper out ; Alarm voice is emitted. Paper near end Paper in ERROR Error occurs Print head is too hot and protected Normal status 3.1.2 Function Keys While pressing the FEED key and holding on, turn on the printer at the same time. Loosen the

• EC Printer EC-520 Series, EC-520 User’s Manual Chapter 4 Loading Paper The printer can use the paper with the width 76mm or 57.5mm, and it is easy to load paper. How to load paper will be introduced in this chapter. 1. Press the open button to open the roll paper cover. If you want to use 57.5mm paper roll to print, you must install the 57.5mm roll paper guide and 57.5mm partition board, and set the paper parameter (as shown in Part 5.2). 57.5mm Partition Board Paper Filler Paper Insert Slot Roll Paper Cover Roll Paper Guide 2. Take the pa

• EC Printer EC-520 Series, EC-520 User’s Manual a) Select pulse: Pulse is supplied from exterior/STROBE. b) Signal exchange: /ACKNLG (answer) and BUSY. c) Logic electric level: All the input data and interface control signal are compatible with TTL electric level. (2) Linker Parallel interface is 57-30360（AMPHENOL）.The parallel interface connector is shown as Figure 5-2. Figure 5-2 pins NO. of the parallel interface connector (3) Definition of pins (as shown in table A-2) Table A-2 Pin function of parallel interface connector Pin return Signal name Direction Description 1 19 /STROBE Data selected IN Width of selected pulse is 0.5 µ

• EC-520 User’s Manual FS 2 Self-define Chinese characters Format: ASCII: FS 2 a1 a2 d1 d2 d3 …d32 Decimal: 28 50 248 a2 d1 d2 d3 …d32 Hex: 1C 32 F8 a2 d1 d2 d3 d32 [Description] Define the user-defined Chinese characters. a1=F8 (Hex); A1 ≤ a2 ≤ FE (Hex). Chinese code has two bytes

• EC Printer EC-520 Series, EC-520 User’s Manual 2.4 Connecting the Power Supply 1. Make sure the power switch is on the OFF position (when the pressed side of power switch is on the “O” position). 2. Check and ensure the voltage supplied from electrical outlet is matched with the printer’s specifications. 3. Plug the AC adapter to printer's power connector. 4. Plug one side of the power cord to the AC adapter, and then plug the other side of the power cord to the electrical outlet with ground wire. Warning: 1. If the voltage cannot match, please contact your dealer for solutions, and do not connect the power co

• EC Printer EC-520 Series, EC-520 User’s Manual Chapter 5 Specifications 5.1 Basic Specifications Print method Dot matrix impact Print direction Bidirectional wizard Print width 42 columns / 63mm (76mm paper width) 30 columns / 45mm (57.5mm paper width) Print speed: 4.7rows/s (paper width 76mm, 40 columns); 6.0 rows/s (paper width 57.5mm, 30 columns) Print head 9 pins; Diameter of pin is 0.3 mm; Life: 400 million dots/pin (200 million characters) Horizontal direction : 420 dots per line (76mm paper width) 300 dots per line (57.5mm paper width) Print pitch Vertical direction: 144DPI Character set ASCII sets, International character sets; Big 5 15x16 ch

• EC Printer EC-520 Series, EC-520 User’s Manual Chapter 1 Overview 1.1 Printer Types EC-520 are series products developed by our Corporation according to different requirements and different using environments. “EC” means EC printer, “520” means printer type, “C” means having auto-cutter module. EC-520 series printers can be chosen among parallel interface, USB interface, serial interface or USB + Ethernet interface. Note: EC-520 printers have no auto-cutter, whereas EC-520C printers have auto-cutter. 1.2 Application y Embedded installation and preprinting common bill printing market y Embedded installation and trilogy common bill printing market y Can

• EC Printer EC-520 Series, EC-520 User’s Manual USB Interface Cable USB Interface Figure 2-4 Connecting the USB interface cable 2. 2. 3.4 Connecting the Serial Interface Cable 1. Make sure that the host computer and the printer are both turned off, connect the serial interface cable to the connector of the printer and tighten the screws as shown in Figure 2-5. 2. Connect the other end of the cable to the host computer’s serial connector and tighten the screws on both sides. 3.5 Connecting the Ethernet Interface Cable Plug the RJ-45 crystal connector of the net cable into the printer, and plug the other connector into t

• EC Printer EC-520 Series, EC-520 User’s Manual GS （ F Set offset of black mark for printing and cutting position Format: ASCII: GS （ F pL pH a m nL nH Decimal: 29 40 70 pL pH a m nL nH Hex: 1D 28 46 pL pH a m nL nH [Description] The parameters set by this command will be valid even after the printer is restarted. This command is used for selecting permission of orientation control by black mark and used for setting the beginning print-position offset or tearing/cutting position offset from black mark. This value is calculated by dots number. The parameters of this command are shown as follows: pL+（pH×256）=4, that is: p

• EC Printer EC-520 Series, EC-520 User’s Manual n1× ms 2 n2×2ms ESC v Transmit printer status Format: ASCII: ESC v Decimal: 27 118 Hex: 1B 76 [Description] This command is effective by using serial interface, and its function is to transmit the status of paper sensor as 1 byte of data. The signification of this byte is following: When paper is out, bit2=1; When paper is in, bit2=0; When black mark is effective, bit7=1 denotes that the current position is the black mark position; bit7=0 denotes that the current position is not the black mark position. If black mark is ineffective, this bit is undefined. FS ! Select Chinese character mode Format: ASCII: FS ！ n Dec

• EC-520 User’s Manual Weight Approx. 2.1 kg (with auto-cutter) Approx 1.9 kg (without auto-cutter) Optional part Auto-cutter Environmental Condition Operating: 5℃-40℃, 20%-80% RH (No condensation) Storage: -10℃-60℃, 10%-90% RH (No condensation) Input: AC 100-240V Frequency: 50Hz/60Hz AC Adapter Output: DC24V 2.5A Power consumption Working power: 16.8

• EC-520 User’s Manual ESC d Print and feed n lines Format: ASCII: ESC d n Decimal: 27 100 n Hex: 1B 64 n [Description] Print the data in the print buffer and feeds n lines. n=0～255. ESC e Print and feed reversely n lines Format: ASCII: ESC e n Decimal: 27 101 n Hex: 1B 65 n [Description] Print the data in the

• EC Printer EC-520 Series, EC-520 User’s Manual FF Print and change page Format: ASCII: FF Decimal: 12 Hex: 0C [Description] Prints one line data in the line editing buffer and feeds to the top of next page based on the current page length. ESC SP Set right-side character spacing Format: ASCII: ESC SP n Decimal: 27 32 n Hex: 1B 20 n [Description] Sets the right-side character spacing to n times of half dot spacing ( 1/144 Inch). n=0～32; Default n=0. ESC ！ Set character printing mode Format: ASCII: ESC ！ n Decimal: 27 33 n Hex: 1B 21 n [Description] “ESC ！

• EC Printer EC-520 Series, EC-520 User’s Manual ① Phenomenon: Paper out LED is on and cannot print; Or the printing action stops suddenly while printing, and paper out LED is on; and at the same time the alarm voice is presented by the printer. Reason: Paper out Solution: Install paper roll once again, the printer will resume normal. ② Phenomenon: Paper out LED is blinking. Reason: Paper is about to use up. Solution: Prepare to install new paper roll. （4）Print head overheat protection Phenomenon: The print head move, but not print. Reason: The temperature of the print head is too hot, and it enters the protect state. Solution: Please

• EC Printer EC-520 Series, EC-520 User’s Manual Chapter 2 Installation 2.1 Unpacking Check the pack list as following (See the Figure 2-1). It contains the following items:（1）Printer; （2）Power cord;（3）Interface cable;（4）AC adapter;（5）Facility user's guide; (6) Printer Driver Disk (Including user's manual and windows driver); (7) Ribbon cassette JMR113; (8) 57.5mm roll paper guide; (9) 57.5mm partition board; (10) Guarantee repair card. If any item is missing or damaged, please contact your dealer. Note: Interface cable is an op

• EC Printer EC-520 Series, EC-520 User’s Manual 4 RTS Ask for Sending Output 5 CTS Allowable to Send Input 6 DSR Data Set Ready Input 7 GND power GND 8 DCD Data Carrier Detect Input …… 20 DTR Data Terminal Ready Output …… 5.2.5 Ethernet Interface 10/100Base-T internet interface can connect to 10/100M internet. Fig 5-8 Ethernet connector 5.3 Auto-cutter Specification EC-520C is equipped with an auto-cutter, which parameter is shown as table A-4: Table A-4 Auto-cutter Specification Item Specification Paper width 85mm（max.） Paper thickness Paper thickness :65～75

• EC Printer EC-520 Series, EC-520 User’s Manual ESC & Define user-defined characters Format: ASCII: ESC & s n m a d1 d2……db Decimal: 27 38 s n m a d1 d2……db Hex: 1B 26 s n m a d1 d2……db [Description] This command is used for self-defining characters. The meaning of each parameter is shown as follows: S: The number of longitudinal byte. Here S=1,2. When n=1, define 7×7 character. When n=2, define 7×9 or half-size character. N: Starting ASCII code of user-defined character set。n≥32. M: Ending ASCII code of user-defined char

• EC Printer EC-520 Series, EC-520 User’s Manual ④ Data Length Data length is pre-set by 8 bits with no change. ⑤ Stop Bit Stop bit Data length is pre-set by 1 bit with no change. ⑥ Control Mode DTR/DSR, XOFF/XON; “DTR/DSR” is the factory default setting. ⑦ Black Mark Setting Black mark setting can be selected by “Black mark invalid “ or “Black mark valid “. “Black mark Invalid “is selected in the factory default setting. ⑧ Print Direction Bidirectional printing and Unidirectional printing; Bidirectional printing is the fa

• EC Printer EC-520 Series, EC-520 User’s Manual Printer’s 26PIN connector PDIUSBD12 chip USB-B connector Figure 5-5 connecting figure of printer and computer with USB interface USB Interface is 2.0 Full-Speed interface, and displayed as a USB port on the computer finally. You can use the USB Interface to print by selecting corresponding USB port. 5.2.4 Serial Interface (1) Serial interface is RS-232 type and the connector type is DB-25. The DB-25 connector is shown as Figure 5-6. Figur

• EC-520 User’s Manual Power Switch Open Button Paper Ladle 57.5mm Partition Board Ribbon Cassette Ribbon Cassette Cove r Ribbon Knob Roll Paper Cover Figure 1-2 Main parts of printer (downwards) 〖without auto-cutter〗 Power Connector Cash Drawer Connector Interface Connector (Parallel / Serial / USB / Ethernet) Figure 1-3 Main parts of printer（backwards ）

• EC Printer EC-520 Series, EC-520 User’s Manual Cash Drawer Cable Cash Drawer Connector Figure 2-2 Connecting the cash drawer cable Must use the cash drawer following the requirements noted on Table A-1 (Part 5.2) ，or the printer’s damage caused by this reason is out of maintenance service. 2. 2. 3.2 Connecting the Parallel Interface Cable 1. Make sure that the host computer and the printer are both turned off, connect the parallel interface cable to the connector of the printer, and tighten the screws as shown in Figure 2-3. Parallel Interface Parallel Interface Cable Wire clip Fi g ure 2-3 Connectin g the parallel interface cable 2. Connect the other end of t

Related Products and Documents (Printer):

Comparable Devices:

Similar Resources:

• HP Designjet 130 Series (5 pages) HP LF Printing Knowledge Center Calibrate my printer: Printer: HP Designjet 30/90/130 series Software: EFI Designer Edition for HP Operating System: Mac OS X …

• HP 2100 ER (95 pages) HP SureStoreFibre Channel SCSI Bridge 2100 ERUser GuideEdition 3Part Number C6340-90003February 2000Printed in: Greeley, CO USA© Copyright 2000 Hewlett-Packard Company …

• Oki T410 (24 pages) 1T400, T410, X400Safety, Warranty and Regulatory Information . . . . . . . . . . . . . . . .2Informations de sécurité, de garantie, et de réglementation . . . . .7Información sobre seguridad, garantía, y regulaciones . . . . . . . .13Informações sobre segurança, garantia e normativas . . . . . . . . .20Country/Region • Pays/Région • País/reg …

• Canon LaserCLASS 310 (73 pages) EDIGITAL VIDEO SOLUTION DISKPRINTED IN JAPANPUB. DIM-422 ©CANON INC. 2002 IMPRIME AU JAPONDY8-9120-310-000 IMPRESO EN JAPÓNMode d’emploi du logiciel Version 1Manual de Instrucciones del software Versión 1PUB. DIM-422DIGITAL VIDEO SOLUTION DISKPUB. DIM-422Software Instruction Manual Version 1CANON INC.U.S.A. Canon U.S.A., Inc.Canon Customer Care CenterTe …

• SEWOO LK-PXX (12 pages) LKLKLKLK----PXXPXXPXXPXX SEWOO TECHSEWOO TECHSEWOO TECHSEWOO TECH 1111 …

• Plockmatic 306 (5 pages) (5)T09149INSTALLATION INSTRUCTION SR85 TO MODEL 306/310PURPOSE:By means of a connection kit enable the SR85 booklet maker to work in line with theModel 306/310 collator. The kit will not affect the normal operation of the SR85 to thecopier/printer.Kit contents:Description Part no QtyLabel, scale 75646 1 pceLabel, arrow 75261 1 pceMicroprocessor 761009-5.02 …

Comments, Questions and Opinions: