Manualios.com

Electronic.Star 10007194 Operation & User’s Manual

Electronic.Star 10007194 Manual Online:

4.45, 2063 votes
Electronic.Star 10007194 User Manual
Electronic.Star 10007194 User Guide
Electronic.Star 10007194 Online Manual

Text of Electronic.Star 10007194 User Guide:

  • Sehr geehrter Kunde, zunächst möchten wir Ihnen zum Erwerb Ihres Gerätes gratulieren. Bitte lesen Sie die folgenden Anschluss- und Anwendungshinweise sorgfältig durch und befolgen Sie diese um möglichen technischen Schäden vorzubeugen. Features  Unterstützt Bilder bis zu 4 MP und QVGA-Videos  Datum- und Zeitstempel auf jdem Bild  Integrier

  • Electronic.Star 10007194, Bedienung Vorbereitung 1. Entfernen Sie die Stahlsicherungsteile (optional) und öffnen Sie die vordere Klappe, indem Sie beide Verriegelungen an der Seite des Gehäuses lösen. Stellen Sie die Ein-/Ausschalter auf OFF (Mitte). 2. Legen Sie 3 Typ C-Batterien in das rechte Batteriefach für den Bewegungssensor ein. 3. Legen Sie 4 Typ D-Batterien in das linke Batteriefach für die Kamera ein. 4. Legen Sie ein CF Karte, auf der die Aufnahme gespeichert werden sollen ein. Beachten Sie hierbei die richtige Ausrichtung. Der interne 16 M

  • Electronic.Star 10007194, Einschalten mit Benutzereinstellungen Schalten Sie den Ein-/Ausschalter auf ON und dir untere Anzeige zeigt die Werkseinstellungen an. Nach 20~30 Sek. erlischt die Hintergrundbeleuchtung und Sie können Einstellungen für Kamera und Bewegungssensor vornehmen. Falls Sie keine Einstellungen vornehmen, wechselt das Gerät nach 1 Minute in den normalen Betriebsmodus. Einstellung des Bewegungssensors (PIR Sensor) Die hier beschriebenen Einstellungen nehmen Sie über die unteren Tasten in Inneren vo

  • Electronic.Star 10007194, Selbsttest / Sensorempfindlichkeit Mittels Distanzregler können Sie die Empfindlichkeit des Bewegungssensor einstellen. Ist der Regler ganz nach rechts gedreht, ist die Empfindlichkeit maximal und es werden Tiere auf bis zu 12m erkannt. Wollen Sie das Tier von Nahem fotografieren sollten Sie die Empfindlichkeit reduzieren. Führen Sie nach dem Einstellen einen Selbsttest durch. Stellen Sie den Ein-/Ausschalter auf TEST und lassen Sie das Gerät 1 Minute starten. Das Selbststestlicht blinkt dreimal wenn Sie durch den Sensor erkannt werden. Nähern Sie sich von Weiten dem Gerät und testen Sie wann Sie erkannt we

  • Electronic.Star 10007194, Menütitel der Kameraeinstellung Es gibt zwei Hauptmenüs für die beiden Modi: A. Live View Modus (Echtzeitanzeige) B. Play-Back Modus (Wiedergabe) Datum und Uhrzeit einstellen Stellen Sie bevor Sie andere Einstellungen durchführen zuerst die Uhrzeit ein. Schalten Sie die Kamera ein, drücken Sie Menü, wählen Sie nun mit Rechts Date/Time und anschließend mit Hoch/Runter “SET”. Drücken Sie nun zum Anzeigen des Kalenders “MENU”, stellen Sie mit den Navigationstasten das Datum ein und Bestätigen Sie YES mit der Menü-Taste. NOTIZ: Der Kalender zeigt die Uhrzeit im 24h-Format an. Schalten Sie den Zeitstempel ein/aus, um diesen auf d

  • Electronic.Star 10007194, Einzel (Bild) Modus Das Gerät ist standardmäßig auf diesen Modus gestellt. Es werden Farbbilder bei Tag und Schwarz/Weiß- Bilder bei Nacht aufgenommen. Sobald der Bewegungssensor eine Bewegung erkennt, wird eine Aufnahme ausgelöst und der Ereigniszähler registriert dieses Ereignis. Video Modus Wählen Sie im Einstellungsmenü Video aus und es werden bei Tag und Nacht Videos aufgenommen. Das Videokamera-Symbol zeigt an, dass dieser Modus aktiv ist. Um das Gerät auf Foto-Aufnahme zurück- z

  • c. TV-Ausgang a. Ausgang b. NTSC c. PAL d. USB a. Ausgang b. MSDC (Standard zum Dowload mittels Windows) c. SIDC (Nur zum Download mittels Windows XP) Benutzung der CF-Karte Das Gerät verfügt über 16MB internen Speicher und kann einige Bilder ohne eingelegte CF-Karte aufnehmen. Es wird empfohlen eine 1GB Speicherkarte einzulegen, damit Sie einige tau

  • Electronic.Star 10007194, B Einstellbares Python-Kabelschloss (Nicht im Lieferumfag enthalten): Siehe Fig. 6 Sie können auch zur Sicherung ein Python-Kabelschloss der Marke “Master Lock” verwenden. Zur zusätzlichen Sicherung kann auch ein U-Bügel aus dem Zubehörhandel benutzt werden. Anschluss einer zusätzlichen IR-Leuchteinheit Erfahrene Benutzer, die eine sehr hohe Bildqualität erhalten möchten, können bis zu 4 zusätzliche Leuchteinheoten an das Gerät in Reihe anschließen. Der Anschluss ist am Boden des Gehäuses. Sie können ein Blitzlicht der Serie IRX-800 oder IR- Lampen wie die RX-20B oder IRX-22B

  • Electronic.Star 10007194, SICHERHEITSHINWEISE UND GEWÄHRLEISTUNG  Diese Bedienungsanleitung dient dazu, Sie mit der Funktionsweise dieses Produktes vertraut zu machen. Bewahren Sie diese Anleitung daher stets gut auf, damit Sie jederzeit darauf zugreifen können.  Sie erhalten bei Kauf dieses Produktes zwei Jahre Gewährleistung auf Defekt bei sachgemäßem Gebrauch.  Bitte verwenden Sie das Produkt nur in seiner bestimmungsgemäßen Art und Weise. Eine anderweitige Verwendung führt eventuell zu Beschädigungen am Produkt oder in der Umgebung des Produktes.  Ein Umbauen oder Verändern des Produktes beeinträchtigt

  • Electronic.Star 10007194, Carefully read this instruction manual before operating device. You should also save the packing material and box in case you need to ship this unit. The box is also printed with useful information. Features  Taking Up to 4 Mp high quality pictures and QVGA video when a motion is detected.  Date and Time Stamp on each picture  Built-In 1.5” Color Screen for field viewing  Two modes for extending long battery life and Turbo snap mode (Fast shot )  16 Mb internal flash memory  Card Slot support Compact Flash up to 4G depend the brand, it does fully support all brands of 1G CF card  M

  • Electronic.Star 10007194, OPERATING INSTRUCTIONS Preparation 1. Remove the Steel security bar (Optional parts) and open the front door by pulling up the two latches on the side of the cabinet. Push the power switch to OFF (Center). 2. Install 3 pcs C type Alkaline batteries into the battery compartment on the right for Motion sensor working. 3. Install 4 pcs D type Alkaline batteries to the compartment on the left for Digital Camera operation. 4. Install a CF card if you wish to take more pictures or video clips. Be careful to insert the CF card according to direction shown on the CF card. 16M internal Flash memory will able to store

  • Electronic.Star 10007194, Factory default settings For Camera: Capture for Single Picture /Auto Exposure / 2M pixels resolution / Quality =Normal / Stamp =ON / Language = English / TV =NTSC / Download =MSDC For Motion detection: Pause= 1 minute / Quick- Shot =1 / Turbo = PW-Save / Work Duty = 24 HRs It is suggested to customize your settings if you are an experience user. Start up with User’s Setting Switch the PW ON, the lower LCD show the default settings immediately. After 20~30s, it’s back light goes to OFF and now you can able to program with your desired parameters instead of the system default for both camera and motion

  • Event Counter Three digits in the center of the lower LCD are the event counter which let you know how many motion records that up to 400 events for a trail history. If you want to renew the counter anytime, simply to press and hold the OK/DEL button until LCD become blinking, then it will resume to [000]. Battery Icon Three icons are for difference batt

  • Electronic.Star 10007194, Setting for CAMERA / Operation Description for Camera Operation Keys SHOT PREVIEW FLASH DISPLAY MENU (Center Key) Navigation Disk CAM-PW (Camera Power Button) Before programming for the camera, be sure Main Power switch at ON position. There are two modes that called LIVE VIEW and PLAY-BACK for operating the camera, once you press CAM-PW to switch ON the Camera, it works at the default of the LIVE VIEW. Both the IN-USE and Walk-Test LED are lighted. DC-PW small light on the right top will alerts with red light for 2 seconds

  • Electronic.Star 10007194, Taking a Photo/ Video Manually Shot key : Push it to take a picture any time while camera is ON even screen remaining OFF. For taking a video clip, 1 st press SHOT to start taking, a stop watch counter will work and press again to stop. Flash key: It is an assistant feature at night before taking a manual night picture or video. Press this key to switch ON the infrared light for 10 seconds in order to illuminate the scene in front of camera. You may view from camera screen what will be captured in the range of dark environment before take a shot. A captu

  • Electronic.Star 10007194, B. Play-Back Mode It is the mode either for Previewing photos and videos in the camera from the viewing screen or connecting to a TV with an attached cable. Preview key: While camera is ON and press PREVIEW key, Camera will be switched to Play-Back mode at once and show the last image. It is also a toggle button let you skip between Live View and Play-Back mode. During in Play- Back mode, the DISPLAY key become for skipping Full View an image > Clean screen > >Thumbnail pictures. You have two ways to enjoy the images

  • Using a CF card This unit has built-in with 16Mb internal memory and therefore the camera can capture for some images or videos immediately even no CF card in the slot. In fact, 1G CF card is recommended to increase more storage capacity that allow more than a few thousands of pictures to be saved when you will leave it in the field. If you have two CF cards and

  • Electronic.Star 10007194, B Python Adjustable Locking Cable (Not including in this packing): See the Fig. 6 You can able to use a Python adjustable locking cable to provide more security to your WildSpy Cam. The “Master Lock” brand is a good choice. With an optional choice, a steel mounting bracket and U type security bar can be used to provide stronger security ability. You can buy this accessory from your local dealer. CONNECT An Ext- Infra-Red Booster For an experienced user, you always would expect to get extreme quality pi

Related Products and Documents (IP Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Panasonic WV-NP502E Installation manual panasonic/wv-np502e-783.pdf 22 Oct 2022 32
2 Nissan Rogue Owner's manual nissan/rogue-5J9.pdf 04 Sep 2023 371
3 LevelOne ViewCon KVM-0407 Operation & user’s manual levelone/viewcon-kvm-0407-J63.pdf 21 Mar 2024 19
4 Samsung NV70x35 Series Operation & user’s manual samsung/nv70x35-series-58W.pdf 29 Jan 2024 35
5 Buderus 600 - 28C Installation instructions buderus/600-28c-14X.pdf 01 Sep 2022 2
6 Intel BX80571E5300 - Pentium 2.6 GHz Processor Datasheet intel/bx80571e5300-pentium-2-6-ghz-processor-J7E.pdf 10 Aug 2022 100

Similar Resources:

  • Orion

    SC200

    (6 pages)
    PROFESSIONALSuRvEILLANcE SYSTEMArlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”) gives the Warranty. Arlec’s telephone number, address and email address are:Customer Service: (03) 9982 5111 New Zealand Toll Free: 0800 003 329Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130E …
  • GeoVision

    GV-SD220

    (78 pages)
    ISD-QG-KQuick Start GuideGV-IP Speed DomeGV-SD220 Indoor IP Speed DomeGV-SD220-S / 2300 / 2301 / 2411 Outdoor IP Speed Dome GV-SD2723-IR / 2733-IR Outdoor IR IP Speed DomeBefore attempting to connect or operate this product,please read these instructions carefully and save this manual for future use. …
  • Arec

    CI-22H

    (10 pages)
    CI-22HFull HD PTZ conference Camera 20XQuick Installation Guide EnglishAREC Inc.© All Rights Reserved 2020. l www.arec.comAll information contained in this document is Proprietary …
  • D-Link

    DCS-2210

    (4 pages)
    Full HD PoE/Wireless N Cube Network CameraDCS-2210 & DCS-22302 Megapixel - Full HD ResolutionHigh-resolution Full HD 1080p video ensures that you capture the details that you needReliable 24-Hour SurveillanceInfrared LED illuminator provides clear video at night for dependable 24-hour surveillanceHigh-Quality Video FeedsReal-time video compression using …
  • D-Link

    DCS-932L

    (7 pages)
    D-Link Technical Support – How to connect the DCS-932L wirelessly. Page 1 of 7 How to connect the DCS-932L wirelessly This document will detail how to change the DCS-932L configuration to be connecting wirelessly to your Wireless Access Point, without having to run through the Setup Utility again. Ensuring the firmwa …
  • Energeeks

    EG-CIPFOCO002

    (76 pages)
    CÁMARA IP WIFI EXTERIOR CON FOCO OBSERVER IIGUIA DE INSTALACIÓN RÁPIDAEG-CIPFOCO002OUTDOOR WIFI IP CAMERA WITH SPOTLIGHT OBSERVER IIQUICK INSTALLATION GUIDE / GUIA DE INSTALAÇAO RÁPIDA GUIDE D’INSTALLATION RAPIDE / GUIDA DI INSTALLAZIONE RAPIDAKURZANLEITUNG ZUR INSTALLATION / INSTALLATIE GIDSΟΔΗΓΟΣ ΕΓΚΑΤΑΣΤΑΣΗΣ …

Comments, Questions and Opinions: