Manualios.com

Camec 43524 Instruction Manual

Camec 43524 Manual Online:

3.75, 2852 votes
Camec 43524 User Manual
Camec 43524 User Guide
Camec 43524 Online Manual

Text of Camec 43524 User Guide:

  • Camec 43524, Contents What’s in the Box TV Controls/Installation TV Inputs and Outputs Remote Control SYSTEM CONNECTIONS AV Input PC Input HDMI Input YPbPr Component Input USB Input 5 6 7 16-18 8 8 9 9 10 COAXIAL Output 10 OSD MENU OPERATION Picture Sound Channel Feature Setup EPG MEDIA OPERATION Photo Music Mocie E-Book Built-in DVD Player Operation 20-21 22-23 23-26 27-30 31-32 33-34 36-37 38 39-41 41 42-47 PVR 35 Cleaning and Maintenance Troubleshooting 48 49-50 51 Specifications Antenna Connection 11 Important Safety Instructions Source Selection 19 1 Base bracket installation 7 First tim

  • Camec 43524, Important Safety Instructions Important Safety Instructions (cont) reference, along with the warranty card, purchase receipt and carton. The safety correctly adhered to. • Before installing this TV set, make sure your outlet voltage corresponds to the voltage stated on the appliance rating label of the power adaptor being used.. • Do not overload the power outlet. • CAUTION the power supply cord, plug and antenna cable to rain or moisture; do not use it anywhere near water; do not touch the power plug with wet hands. • Do not let the cord han

  • Camec 43524, 4 5 What’s in the Box 28" TV with inbuilt DVD Player Manual Remote Control • When deciding where to put the TV set, make sure the location is: • Well ventilated. Leave at least a 20cm space all around the TV set for good ventilation. • Protected from overheating and away from direct sunlight. • Away from damp and cold. • Away from areas with extremes of temperature (below 0°C or exceeding 40°C) or moisture. • Away from moisture drips or splashes. • Protected from excessive dust. • Do not install this equipment in a confined space such as a book

  • Camec 43524, TV Controls Controls on the TV 7 Base bracket installation 6 200 100 1. After you load a disc, press to play the disc, and press twice to pause. 2. Press the button when the power is on the disc will eject, Press the button again to load the disc automatically. 3. INPUT - This button switches between all the different sources of the TV. When the OSD is active, this button acts as the enter button and confirms the menu selection. 4. MENU - This button activates the OSD menu. If a su

  • Camec 43524, 8 9 System Connection System Connection NOTE: Please, make sure the inputs and outputs have firm connections before connecting power. 1. COMPOSITE AV INPUT Audio/video input: Use the SOURCE button to select AV on the TV. VGA OUT PU T PC AUDIO OUTPUT VGA OUTPUT 2. PC INPUT PC input: Use the SOURCE button on the remote control to select PC. Video Cable Red/White/Yellow (Not supplied) 3. HDMI INPUT HDMI input: Use the SOURCE button on the remote control to select HDMI. Source eg. Blu-ray, DVD, Satellite, camcorder etc HDMI 1 4. YPbPr COMPONENT INPUT Video component input: Use the SOURCE butt

  • Camec 43524, 11 System Connection Remote Control 7. Antenna connection Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected to the antenna jack directly. 75ohm coaxial cable Antenna cable Antenna lead with 75 ohm male PAL Connector - Batteries should not be exposed to excessive heat such as direct sunlight, fire or the like. - If not being used for a period of time, please remove the batteries from the remote in case of leakage. - Do not mix old & new batteries together. Installing Batteries 1 Open the battery compartment cover on the back of the remote. 2 Insert two 1.5V AAA size batteries using the correct polarity as shown. Don’t mix old or use

  • Camec 43524, First Time Use First Time Use cont’d 12 13 Auto Installation If this is the first time you are turning on the TV and there are no programs stored in the TV memory, the “Auto Installation” menu will appear on the screen. Please use the following steps as a guide. Step 1: Set up Home (Screen brightness setting) The factory default is “Home” or you can select Dynamic for higher contrast, “Standard” for a picture to suit most types of viewing or “Mild” for a softer picture. Step 2: Set up the Country Please ensure “Australia” is selected. Note the European selection screen is pictured below for reference. Step 3: Set up the Menu Languag

  • Camec 43524, First Time Use cont’d 14 15 Step 5: TV Connection “Air” is the default setting for this option and should not be changed. Step 6: Auto Search IMPORTANT NOTE. Please make sure your TV Antenna is connected and correctly orientated before completing this step. For most Australian applications, select “DTV” on the remote using the ▼/▲ buttons to select, then press the ENTER button or ►button to scan for the TV Channels.

  • 16 17 Remote Control Unit P.MODE S.MODE AUTO DISPLAY SOURCE EXIT MENU AUDIO REC.MENU POWER MUTE FAV EPG HOLD SUBTITLE INDEX REVEAL TEXT SUBPAGE SIZE REC OK QT TIME SHIFT ASPECT TV/RADIO CANCEL MIX D.MENU SETUP D.DISP A-B REPEAT I/II SLEEP 1 4 6 11 15 9 21/25 22/26 29 30 33 37 41 34 38/45 42/48 16 2 3 5 8 7 10 13 14 12 17 18/19 20 24/28 23/27 32 31 36 35 40/47 39/46 44/50 43/49 Allows you to

  • 18 19 OSD Menu Operation Press the SOURCE button to display the input source list. Press the ▼/▲ buttons to select the input source you want to watch, Press the OK button to select the input source. Source Selection No. Button Description 42 45 46 47 48 49 50 SIZE Zoom In or Out of the Teletext window. Play and Pause Media‐Player / DVD. Stops playback Media‐Player an

  • Camec 43524, 20 21 OSD Menu Operation Picture Menu Press the MENU button to display the main menu. Press ▼/▲ buttons to select Picture in the main menu, then press the ENTER button or ► button to select. OSD Menu Operation Press ▲/▼ buttons to select the option that you want to adjust in the Picture menu, and then press ENTER button or ► button to select. Press ◄/► buttons to adjust or press ▲/▼ buttons to select and press the ENTER button or ► button to select the sub menu. After completing your adjustment,

  • Camec 43524, 22 23 OSD Menu Operation OSD Menu Operation Sound Menu Press the MENU button to display the main menu. Press ▲/▼ buttons to select Sound in the main menu, then press the ENTER button or ► button to enter. Press ▲/▼ buttons to select the option that you want to adjust in the Sound menu, then press the ENTER button or ► button to enter. Press ◄/► buttons to adjust or press ▲/▼ to select, and press the ENTER or ► button to select a submenu. After completing your adjustment, press the M

  • Camec 43524, 24 25 OSD Menu Operation Channel Menu Cont’d Press the RED button to set the current channel to lock (block the channel), if the current channel already locked, press the RED button again to cancel the lock. NOTE: Lock must be enabled (YES) in the FEATURE menu for this function to work (see P24). Press the GREEN button to set the current channel to delete, if the current channel is already set to delete, press the GREEN button again and this will cancel the delete option. If you have a channel set to delete after the operation above, press the MENU button or ENTER button and the following confirmation dialogue wil

  • Camec 43524, OSD Menu Operation OSD Menu Operation 26 27 Auto Search cont’d Press ▲/▼ buttons to select All, Digital, Analogue, then press the ENTER or ► button to select. When you select the appropriate Auto Search, the dialogue box above will appear. Select “OK” and press ENTER, otherwise select CANCEL to return back to previous page. After a few seconds, the channel search display below will appear (ATV version pictured): When auto search is finished, a “Save Successful” dialogue box will appear for a few seconds to confirm that the search has completed. Feature Menu Press the MENU button to display the main menu. Press ▲/▼ buttons to select Feature from the main menu, then pre

  • OSD Menu Operation OSD Menu Operation 28 29 Enter the current Password next to“Old Password”, (if the Password entered is incorrect, the password can not be changed). A reminder that the default Password is “0000" Enter the new Password next to“New Password”. Enter the new password again next to“Confirm New Password”. If the new Password and co

  • Camec 43524, OSD Menu OperationOSD Menu Operation 30 31 Setup Menu Press the MENU button to display the main menu. Press ▲/▼ buttons to select Setup in the main menu, then press ENTER or ► to enter. OSD Timer Press ▲/▼ buttons to select the length of time the On Screen Display stays on, then press the ENTER or ► button to enter the sub menu, then Press ▲/▼ buttons to select. (Available OSD Timer options: 5, 10, 15, 20, 25, 30 Seconds or Never), then press the ENTER or ► button to confirm.

  • Camec 43524, Remote Control Functions Remote Control Functions 32 33 Channel List Press the LIST button on the remote control to display the channel list menu. Press ▲/▼ buttons to select channel that you want to view, then press ENTER to view. FAV List (Favourite Channel List) Press the FAV button on the remote control to display the FAV list menu.. Press ▲/▼ buttons to select the channel that you want to view, then press the ENTER button to view. Press ◄/► buttons to switch between favorite 1, favorite 2, favorite 3 and favorite 4. Subtitle Press subti

  • Camec 43524, EPG Functions PVR TV Recording Functions 34 35 Press the RED button to switch between EPG weekly mode and EPG daily mode. 1. Displays the current channel No. and channel name. 2. Displays the current program’s start-shop time and program name. 3. Displays the current date and time. Press ▲/▼ buttons to select the channel or program. Press ◄/► buttons to choose between the channel and program. 1 2 3 To see programs from the previous day(s), press the yellow button on the remote. To see prog

  • Camec 43524, Thumbnails Thumbnails mode can be shown only in photo mode and highlighted in file browser by pressing “EXIT” → “Right( )” :► to display thumbnails as per below Media Operation 36 37 Press the “MEDIA” button on the remote control to access this menu. You can also access this menu by selecting “MEDIA” as a Source on the remote Control. Press buttons to select Photo/Music/Movie/Text , and then press the ENTER the ◄ / ► button to select. NOTE: A USB device must be inserted to use these functions. Photo Formats Supported:JPG, JPEG/Progres

  • Camec 43524, Media Operation 38 39 Press ▼/▲ buttons to select the Song you want to listen to, then press the ENTER button or button or button to play. Press the button to return back to the previous menu . Music Playback Formats Supported MUSIC WAVE LPCM ADPCM WMA WMA STD WMA Prof AAC AAC-LC / HE-AAC AC3 AC3 E-AC3 MPEG MP1 MP2 MP3 AAC-LC HE-AAC Read Audio Cook Ogg Vorbis FLAC FLAC Movie Formats Supported Type Container Video Decoder MOVIE AVI MPEG-4 ASP H.264 DivX Xvid WMV 9 / VC - 1 MPEG-4 SP MJPEG MPEG 1/2 MPEG-1 Video MPEG-2 Video MPEG4 MPEG-2 Video MPEG-4 ASP H.264 Xvid MJPEG WMV WMV 9 / VC-1 RealMedia RV30 / RV40 Flash Sorenson H.263 H.264 QuickTime MPEG-4 A

  • Camec 43524, QuickTime MPEG-4 ASP H.264 MJPEG ASF WMV3 / WVC1 MP4S / M4S2 Matroska Video MPEG-2 Video MPEG-4 ASP H.264 Xvid DivX DivX Plus HD RV30 / RV40 WMV9 / VC-1 DivX MPEG-4 ASP DivX Xvid TS Stream MPEG-2 Video H.264 WMV 9 / VC-1 Movie Playback Press ▼/▲ buttons to select the folder on the USB device that you want to view, Press the ENTER button to select the sub folder if required. Then press the ENTER button or button to play the movie file Press the button or EXIT button to stop playback. Press the button to return back to previous page. You can view the information on the current playing media for

  • Camec 43524, - - General Setup Page - - TV Display OSD Lang Captions Last Memory Wide Eng Off Off Wide Eng Off Off - - General Setup Page - - 1. TV DISPLAY: Set the screen ratio options are: Normal/PS (4:3 Pan Scan), Nomal/PS (4:3 Letter Box) and Wide (16:9). The default setting is wide. 2. OSD Lang: Set the OSD Language options. 3. CAPTION: Play captions on supported DVD titles, Options: ON/OFF. 4. LAST MEMORY: Play DVD from last point. Options are: ON/OFF. 1. LT/RT: Logic Surround stereo audio output. This matrix-based coding process enables stereo au

  • Camec 43524, 46 47 Chapter Title All O? Built-in DVD Player Operation(Cont.) Title Search [DVD] Press [GOTO], then press the number buttons to enter the desired title number. Repeat Playback Press [REPEAT] during playback to activate repeat mode: l l l Built-in DVD Player Operation(Cont.) Subtitle language [DVD] If the DVD you are watching has subtitles, press [SUBTITLE] repeatedly during playback until the desired subtitle language appears on the TV screen. Example: SUBTITLE 01/03 ENG NOTE: Not all discs support this function. Au

  • 48 49 Cleaning and Maintenance WARNING! For your personal safety, be sure to disconnect the power adaptor before proceeding with any maintenance or cleaning. Cleaning the TV screen • Do not touch the TV screen with sharp objects. • Use a clean, soft cloth to wipe off any dust and fingerprints from the TV screen surface. Wipe in a straight motion from the center of

  • Camec 43524, 50 51 Troubleshooting (Cont.) Specifications 043524 28" (70cm) 6kg LED DC12V 5A 35 1  643 x 179 x 434mm 643 x 80 x 390mm 1366 x 768 3000:1 8ms 2 x 10W 160(H) x 170(V) VESA 200 x 100 *As RV Media continually strives to improve its products, Specifications may be subject to change without notice. Warranty This product is backed up with a 2-Year Warranty. Please see the warranty document for full terms and conditions. Warranty Helpline: 1300 654 936 © 2015 V1.0

Related Products and Documents (LED TV):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Porter-Cable 2601 Instruction manual porter-cable/2601-WT8.pdf 07 Nov 2023 24
2 Samsung GT-P7100/M16 Quick start manual samsung/gt-p7100-m16-C5U.pdf 12 Mar 2023 32 0.4 Mb
3 Huawei U1315 Operation & user’s manual huawei/u1315-9PI.pdf 26 Apr 2023 10
4 Char-Broil 463620208 Product manual char-broil/463620208-148.pdf 27 Jul 2023 24 5.12 Mb
5 Olympia PMR 1420 Manual  olympia/pmr-1420-LZ3.pdf 06 Feb 2024 78
6 Panasonic SC-TM31 Service manual panasonic/sc-tm31-89E.pdf 23 Apr 2023 15

Similar Resources:

  • Philips

    3500 Series 42PFL3507/98

    (3 pages)
    Philips 3500 seriesLED TV with Digital Crystal Clear107cm (42")Full HD 1080p42PFL3507Relax and enjoy a great TV nightwith Full HD LED and powerful soundRelax and enjoy a great TV night in brilliant LED quality on the Philips 42PFL3507 Full HD LED TV. Powered by Digital Crystal Clear, you can enjoy TV in clear, vivid details, complimented with a powerf …
  • Samsung

    Series 4000

    (2 pages)
    Connections y For the best picture and audio quality, connect digital devices using an HDMI cable. y If you connect an external device to the TV that uses an older version of HDMI, the video and audio may not work. If this occurs, ask the manufacturer of the device about the HDMI version and, if it is out of date, request an upgrade. y Be sure to purchase …
  • Panasonic

    TH-L24XM6A

    (24 pages)
    Model No.Australia New ZealandTH-L24XM6A TH-L24XM6ZOperating InstructionsLED TVEnglishThank you for purchasing this Panasonic product.Please read these instructions carefully before operating this product and retain them for future reference.The images shown in this manual are for illustrative purposes only. Some illustrations are presented as conceptual ima …
  • LG

    32LY340C-TA

    (31 pages)
    Please read this manual carefully before operating your set and retain it for future reference.www.lg.comOWNER’S MANUALLED TV** Disclaimer LG LED TV applies LCD screen with LED backlights.LY33**LY34**LY54** …
  • Samsung

    UE32F6470

    (385 pages)
    © 2013 Samsung Electronics Co., Ltd. All rights reserved.BN68-04779D-05LED TVuser manualThank you for purchasing this Samsung product. To receive more complete service, please register your product atwww.samsung.com/registerModel _____________Serial No. _____________e-ManualMORELED TV user manualContact SAMSUNG WORLD WIDEIf you have any questions or comment …
  • LG

    CS47 Series

    (136 pages)
    www.lg.comPlease read this manual carefully before operating your set and retain it for future reference.LS34**LM34**CS46**CS47**OWNER’S MANUALLED LCD TV / LCD TVP/NO : MFL67360813 (1204-REV03)Printed in Korea …

Comments, Questions and Opinions: