Manualios.com

Canon RM-Lite Administrator's Manual

Canon RM-Lite Manual Online:

4.75, 1003 votes
Canon RM-Lite User Manual
Canon RM-Lite User Guide
Canon RM-Lite Online Manual

Text of Canon RM-Lite User Guide:

  • 3 NOTICE ABOUT THE MPEG-4 VISUAL STANDARD THIS PRODUCT IS LICENSED FROM MPEGLA, LLC. UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY. NO

  • Canon RM-Lite, 24 Example 3: H.264 recording • Image recording from 8 cameras (VB-M40). • Image size is 320 x 240 and image quality is 3. • Recording frame rate is 30 fps. • Data size per second is approximately 84 KB. Although the actual recording file size depends on the objects recorded by each camera, this calculation assumes the typical sizes given above. If H.264 images from 8 cameras are recorded at 30 frames per second in continuous recording mode, the required hard disk space is approximately 55 GB per day (= 84 KB x 8 cameras x

  • Canon RM-Lite, 76 Configure the Recording Mode  Continuous Recording Settings ➀ [Aspect Ratio] Specify the aspect ratio ([4:3]). If you select [Not specified], the camera’s aspect ratio setting is used for recording. ➁ [Resolution] Set the [Aspect Ratio] to [4:3] to make this setting available and specify the resolution ([160x120], [320x240], [640x480] or [1280x960]). If you select [Not Specified] for the [Resolution], the camera’s resolution setting is used for recording. ➂ [Video Format] Specify the video format ([JPEG], [MPEG-4] or [H.264]). The available formats depend on the camera model. Note If you select [MPEG-4] or [H.264] for the [Video F

  • Canon RM-Lite, Record on a Regular Basis (Repeating Weekly Schedules) 77 Setting a Recording Schedule 5 ➅ [Advanced] Displays the [Advanced Recording Settings] dialog box. For details, see “Configure the Advanced Recording Settings” (p. 82). ➆ [Use the recording-mode stream] Enable the recording stream function. With this function, the camera temporarily stores the image in its own memory before sending it to the Storage Server. This can help reduce the effects of non-uniform network traffic (jitter). Note • The recording-mode stream function will only work if the camera supports the feature and the stream can be ac

  • Canon RM-Lite, System Design 25 Introduction 1 Example of the Data Size for the VB-C500VD/VB-C500D/VB-C60 (JPEG) (Unit: KB) Example of the Bit Rate for the VB-C500VD/VB-C500D/VB-C60 (MPEG-4) (Units: Mbps) Note The data size for MPEG-4 images may increase when recording images with quick movements. Example of the Data Size for the VB-C300 (JPEG) (Units: KB) Image Quality Image Size 160 × 120 320 × 240 640 × 480 1 3.5 9.6 27.5 2 4.0 11.0 31.7 3 4.4 12.5 35.8 4 5.6 16.4 47.8 5 15.8 52.7 171.4 Image Quality Image Size and Frame Rate 10 fps 15 fps 30 fps 320 × 240 640 × 480 320 × 240 640 × 480 320 × 240 640 × 480 1 0.28 0.76 0.35 0.94 0.54 1.43

  • Canon RM-Lite, 86 • [Manual] Compensate for the exposure manually. The following exposure compensation settings are displayed. [Iris]: Specify the iris setting. Drag the slider to the left to close down the iris and make the image darker or to the right to open up the iris and make the image brighter. [Shutter]: Specify the shutter speed using 15 levels, from 1/1 to 1/8000 seconds. [Gain]: Specify the gain (sensitivity to brightness). Drag the slider to the left to decrease the gain and make the image darker or to the right to increase the gain and make the image brighter. ➁ [Smart Shade Control]: Specif

  • Canon RM-Lite, 96 Record Now Start recording while watching the live image. The recording format is JPEG. A white frame surrounding the selected video window is displayed. Recording starts. The upper part of the window is red when recording. Recording stops automatically after the set time period. The maximum frame rate is 5 fps. Note • Audio is also recorded if audio is available from the camera. • The [Record Now] duration can be changed. For details, see “Configure the Viewer Display and Operation Settings” (p. 57). Hint You can use [Record Now] to immediate

  • Canon RM-Lite, System Design 23 Introduction 1  Hard disk capacity requirements It is assumed that you use continuous recording at a fixed frame rate (number of images per second), image size and quality. The size of the recording file varies depending on how the camera is configured (the settings for image quality and size) and the complexity of actual scene. Follow these steps to determine the required hard disk capacity. The higher the image quality setting, the higher the image quality and resulting data volume. For general security purposes, you can use 1 to 2 fps. Higher frame rates require more hard disk space. We

  • Canon RM-Lite, 84 You can return the focus of the camera to its default setting by selecting [Return to default focus when the camera is operated]. Note The camera returns to the first preset position after reaching the last preset position. Hint Click [Start Test] to run through the preset tour once to confirm your settings. About the Warning Message Displayed During the Preset Tour Depending on the preset tour settings, a warning message about the camera’s pan/tilt mechanism may be displayed when you click [OK] to close the [Preset Tour Settings] dialog box. If this happens, consider changing the settings ac

  • Canon RM-Lite, Error Messages 123 Troubleshooting 9  Error Messages in the Viewer Message Cause Recording schedules This schedule item overlaps a previously scheduled item. Please check your settings and try again. Recording schedules overlap. Recording schedule items must be set at least 15 minutes long. Please check your settings and try again. Tried to set a schedule with a period shorter than 15 minutes. Recording schedule items cannot be created for the following cameras because of a clash with existing schedules: <camera name> Tried to drag a recording schedule window to add multiple recording schedules, but on

  • Canon RM-Lite, Configure a Storage Server Group 43 3 Storage Server Settings  Configure the Mail Server ➀ [SMTP Server] and [Port] Enter an SMTP server name and change the port number, as required. ➁ [Authentication] Specify an SMTP server authentication method ([None], [POP before SMTP], [SMTP-AUTH]). ➂ [User Name] If [POP before SMTP] or [SMTP-AUTH] is selected in [Authentication], enter a user name to be used for authentication. ➃ [Password] Enter a password to be used for authentication with the user name entered in ➂. ➄ [POP Server] and [Port] If [POP before SMTP] is selec

  • Canon RM-Lite, 66 Place a Video Window You can place a video window anywhere in the viewing area. You can arrange video windows according to a grid.  Change the Layout Background Image You can select an image for the layout background. Note • The image that you specify as the background will be registered to the [Background] list in the layout properties. • To disable backgrounds, select [(None)] in the [Background] list of the layout properties.  Display a Grid •[None] Do not display a grid. • [Alignment] Display

  • Canon RM-Lite, 50 Note •Items ➀ to ➃ can only be changed if the camera is disabled using [Disable Camera]. • If a camera is not working, you can disable it to prevent communication error notifications from being sent repeatedly. • If you replace a camera that is not working with another camera, the host name, etc, is changed to that of the new camera, so there will be no effect on existing recording schedules and settings. (The replacement should be the same model as the original camera.)  Change the Thumbnail Image of a Camera You can change the thumbnail image of a camera. In the [Camera Properties] dialog box, click

  • Canon RM-Lite, 118 When a recording error occurs (e.g., data is missing) during playback, you can troubleshoot the cause by checking the information in the event log and the Storage Server log file. If you encounter problems when you use the Viewer, refer to the following solutions: Viewer and Video windows Actions Required When Recording Errors Occur Log Cause Action Event Storage Server Error: Cannot Connect to Camera CameraServer <host name> disconnected(<error information>) A network error may have occurred. Look for the cause of the error by checking the Winsock error code recorded in the

  • Canon RM-Lite, Error Messages 127 Troubleshooting 9 HTTP Error Codes wininet Error Codes POP Error Messages Code Error Message Possible Cause 401 Unauthorized The user name and password for connecting to the camera is incorrect. 403 Forbidden A connection cannot be established due to an IP address restriction on the camera. This may also be returned by a proxy server. 500 Internal Server Error Occurs when the HTTP server is running but the Storage Server is not started. It may also occur during normal operation if the camera is restarted. 503 Service Unavailable Occurs when the camera is temporarily unable

  • Canon RM-Lite, Edit a Recording Schedule 91 Setting a Recording Schedule 5  Import by Specifying the Day of the Week You can copy from a weekly schedule by specifying the day of the week to copy. Using this procedure, you are able to edit the recording schedule after making the copy. Hint Importing by specifying the day of the week can be used to import the schedule for any of the days of the week contained in the weekly schedule. For example, you can import the schedule of a day of the week that is different from the day of the week of the target day. 1 Select a camera in the schedule area. 2 Click [Copy from

  • Canon RM-Lite, 38 Flow of Storage Server Settings Start the Viewer (p. 39) Configure a Storage Server Group Display the [Storage Server Group Settings] dialog box (p. 41) Change the Storage Server Group name (p. 41) Configure the recording settings (p. 41) Configure the event priority and e-mail notifications (p. 42) Configure a Storage Server Display the [Servers] tab (p. 45) Specify the storage period for recorded images (p. 45) Change the destination of the recording file and the maximum disk usage (p. 46) Add a camera Display the [Cameras] tab (p. 47) Add cameras one a

  • System Design 27 Introduction 1  Notes on Storage Server Operation We recommend that you dedicate the Storage Server computer exclusively to running this software. Be sure to avoid the following on the Storage Server computer: • Running Web server software on the computer You cannot operate the Storage Server on a computer where Web server software such a

  • Canon RM-Lite, 56 Flow for Viewer Settings Start the Viewer (p. 39) Configure the Viewer Display the [Viewer Settings] dialog box (p. 57) Configure the Viewer display and operation settings (p. 57) Configure the display/hide mode for each event (p. 58) Configure event notification and priorities (p. 58) Configure the camera Display the [Camera Selector] dialog box (p. 59) Select a camera (p. 59) Configure the [Advanced Camera Settings] (p. 61) Configure the video window (p. 60) Configure the video window layout Create a layout (p. 65) Place a video window (p. 66) Save the layout (p. 67) Configure a dynamic layout (p. 67) Configure a layout sequence (p. 68) Importa

  • Canon RM-Lite, 132 For setting details for the AXIS Q7404/Q7401, see the user manuals and safety precaution manuals includied with each product. Supported Firmware The following firmware is necessary when using the AXIS Q7404/Q7401. Usage Precautions • When registering the AXIS Q7404/Q7401 in RM-64/25/9, you must enter the host name, and the Administrator group account user name and password just as with other cameras. • Register one AXIS Q7404/Q7401 at a time. You cannot search and register them. • If the number of simultaneous accesses to the AXIS

  • Canon RM-Lite, Record at Specific Times (Special Day Schedule Settings) 89 Setting a Recording Schedule 5 Specify the Day for the Special Day Schedule Note • Special day schedules can only be set for a one-day time period (00:00 to 24:00). For example, for a three-day long weekend (Saturday, Sunday and Monday) you will need to set a separate schedule for each of the three days. • You cannot apply different special day schedules to the same day. Select a Camera For details, see “Select a Camera” (p. 73). Specify the Recording Settings The setting items are th

  • 20 This software records images from cameras using an IP network, such as a LAN. Configuration Example 1: Storage Server and Viewer Installed on One Computer This example shows the simplest system configuration, where the Storage Server and Viewer are installed on one computer. Images from the cameras are displayed or recorded using the same computer. System Configuration Example Important • Th

  • 130 You can configure the way the Viewer starts up, for example, to have it bypass the login screen with the user name and password (pp. 39, 40) by creating a shortcut icon that specifies Viewer startup options. [Viewer.exe] is located in the following folder by default: <System drive>:\Program Files\Canon\WebView\NVR A dialog box asking whether to create a shortcut on the desktop is d

More Instructions:

DOWNLOAD

Related Products and Documents (Recording Equipment):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 ZyXEL Communications Dimension ES-1528 Operation & user’s manual zyxel-communications/dimension-es-1528-66I.pdf 18 Aug 2022 170 4.52 Mb
2 Crestron CLTI-4HSW4 Installation manual crestron/clti-4hsw4-36W.pdf 03 Dec 2023 4 0.52 Mb
3 Monitor Audio PL IW Template monitor-audio/pl-iw-19V.pdf 25 Aug 2023 1
4 JVC Everio GZ-HD10 Operation manual jvc/everio-gz-hd10-Q11.pdf 29 Jun 2023 40
5 Telecom R7 Operation & user’s manual telecom/r7-B2O.pdf 23 Sep 2022 100
6 PA Tech QSM-6505A Operation & user’s manual pa-tech/qsm-6505a-333.pdf 26 Jun 2023 8

Similar Resources:

  • Fostex

    VF08

    (3 pages)
    Fostex VF-08 8-track Digital Multitracker _______________________________________________________ Contents I. Description II. Mixer features III. Recorder features IV. Selling Points vs. Competition V. Model 8340 SCSI Card _______________________________________________________ The Fostex VF08 is the breakthrough of the digital multitracker tha …
  • invotel

    SX9800E

    (2 pages)
    WarrantyThis product is warranted against defects for a period of five (5) years from the date of originalinvoice. We will repair/replace the product with no charge for parts or labor within this time. Toobtain warranty service the product needs to be returned freight prepaid by the customer with acopy of original invoice. This warranty does not apply if in …
  • Teac

    GF-350

    (21 pages)
    PC board shown are viewed from parts side.The parts with no reference number or no parts numberin the exploded views are not supplied.As regards the resistors and capacitors, refer to thecircuit diagrams contained in this manual.Parts marked with this sign are safety criticalcomponents. they must be replaced with identicalensure exact replacement.!components …
  • Wenger

    Legacy

    (16 pages)
    ©Wenger Corporation 2017 Printed in USA 06/17 Part #186G186-05Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448Questions? Call.....USA: 800-4WENGER (493-6437) • Worldwide: 1-507-455-4100 • www.wengercorp.comContentsVisit the Legacy Classic web page at www.wengercorp.com for more details.Note: Please read and understand …
  • Danfoss

    ECL Comfort 210

    (53 pages)
    Instructions ECL Comfort 210 / 310, communication description Table of Contents 1. Introduction ............................................................................................................................................................................2 2. ECL 210/310 communication interfaces ........................................ …
  • evertz

    DreamCatcher

    (71 pages)
    DREAMCATCHER Replay System Installation Guide © Copyright 2016 EVERTZ MICROSYSTEMS LTD. 5292 John Lucas Drive, Burlington, Ontario, Canada L7L 5Z9 Phone: +1 905-335-3700 Internet: Sales: [email protected] Sales Fax: +1 905-335-3573 Tech Support: [email protected] Tech Support Phone: +1 905-335-7570 Web Page: http://www.eve …

Comments, Questions and Opinions: