Challenger SLDCRF Operation & User’s Manual

Text of Challenger SLDCRF User Guide:

• 30 F . Viewing images via PC and TV You can connect directly to the receiver box of your SLDCRF using the provide d USB cable to PC . Alternatively you can use a card reader or a digital camera to read the SD card. When connected the SD card will show as a removable hard drive an d you can use Windows Explorer to see y our SLDCRF captured images or video

• Challenger SLDCRF, 29 you will find the image counter is return to 00000 If you choose to format your memory, it will erase all images. This feature is particularly us eful if you don t want to look through the images one at a time. To exit the delete setting , press UP or DN button to select NO - dl ( No Delete ) then press [MENU] to back to capturing mode .

• Challenger SLDCRF, 25 After exit the resolution setting, the word CAMERA will be blinking on the display Press OK button to choose the selection. Then the numbe r of burst mode will now blink. Press the UP or DOWN button to select the desired burst mode setting (1P to 3P of pictures per triggering). The number of burst mode is 1P to 3P. Press OK to save your selection and exit to TIME OUT settings. Set the Video Mode: Your SLDCRF can program to recor d 5~60 seconds of video per triggering. After p ressing the MENU button, p ress UP button twice to enter video setting mode. The word VIDEO w

• Challenger SLDCRF, 21 4. Te sting the capturing area PIR coverage area The testing is to make sure that the capturing and PIR coverage area is correct . After completing above matching pair steps , connect the provided AV cable to AV OUT of receiver box and AV IN of TV as below Cha nging the TV to play the AV The TV will show live footage of camera. Ad just the position of your SLDCRF if necessary , until the desired coverage area is achieved.

• Challenger SLDCRF, 5 Floodlight : It can be rotate and tilt ing to adjust the lighting area. The max rotation is +/ - 30 Deg, tilting angle is 10 Deg. Flood light screw : Release to open the flood light case to replace the halogen lamp Flood light cover : Open to replace lamp Halogen lamp: For lighting purpose, please use the correct voltage and wattage of halogen light for this product. Haloge n lamp R7S, Max power: 300W. Front cover locker : Use to open or lock the front cover Front cover PIR : Passive Infrared movement sensor. Cam Lens : This is the digital camera lens. Please use

• Challenger SLDCRF, 9 Operation indicator : Show s the operation status of Camera and Receiver box. Blinking : Ind icating data is transmitting from camera to receiver box. Light up : Indicating the SLDCRF is operating. LCD display CAMERA : Still image cap ture icon. Indicates your SLDCRF will capture a single image.

• Challenger SLDCRF, 24 2. Set the R esolution After power on the receiver box, press the SET button then MENU button within 30 seconds to enter programming. If MENU button is not pressed within 30 seconds, camera will automatically enter PIR detection mode. The first program setting is resolution. After pressed the MENU button The word RESOLUTION will be blinking on the display. Press OK button to choose the selection. Press the UP or D OW N button to select the desired res

• Challenger SLDCRF, 2 Manual Contents: A. Camera kit contents 3 B. SLDCRF overview 4 C. Mounting the camera 15 D . S etup Getting started 18 E . Program the parameters 23 F . Viewing images via PC and TV 30 G. C ontrol receiver box by remote controller 35 H. Technical Specifications 36 I. General information and safety 37 J. FCC

• Challenger SLDCRF, 35 G. Control the receiver box by remote controller The Remote controller is a full operation i nfrared transmitter; you can use it to access the receiver box within 7 metre and +/ - 12 deg. All the buttons function s and operation are same as the button of receiver box, please refer to Program the parameter section and view of the remote controller section to access the receiver box, and play the captured im age/video . The remote controller uses a button cell battery, please follow the figure on the back side of remote controller to replace the

• Challenger SLDCRF, 10 VIDEO : Video - captur ing icon. Indicating your SLDCRF is in video capturing mode and recording time will depend on the video recording time setting. 18 - 88 - 88 : Image /video counter to sh ow how many images or videos have been captured. And at parameter settings, it shows the Date and Time setting. RESOLUTION HIGH : Indicates the SLDCRF is in high - resolution still image capturing or video capturing. RESOLUTION LOW : Indicates the SLDCRF is in Low - resolution still image capturing or video capturing. D ATE : Indicates the SLDCRF is in Date setting . TIME : Indicates the SLDCRF is in Time s

• Challenger SLDCRF, 15 C . Mounting the camera Mount the SLDCRF to a solid surfac e more than ½ or 12.7mm thick in a secure location overseeing the area to monitor . We suggest you mount the camera between 2 meters off the ground with the camera pointing at a downward angle 15 degrees. Be sure to avoid mounting the camera facing east or west as the rising and setting of the sun may produce false triggers and overexposed images. Ensure the front of your SLDCRF is clear of any branches and other debris so your camera vi

• 33 3. Viewing a live image from SLDCRF Your SLDCRF c an also be used as a web cam Please install the SLDCRF Webcam driver to your PC first. Install the provided CDROM to your PC, and then c lick SETUP. EXE to install the driver. Connect the provided USB cable to your PC and other side to USB socket of your S LDCRF receiver box . The receiver box o

• Challenger SLDCRF, 18 D . S etup getting started 1. Connecting the power to receiver box Place the receiver box at a de sk or somewhere easy to access and easy for remote controller to acc ess. Plug the provided AC adaptor to wall AC outlet as below Plug the small plug to receiver box DC 5V as below. Please make sure the output voltage of AC outlet is correct to match the operation AC voltage of AC adaptor. The operation voltage of AC adap tor is 100 ~ 240 volts.

• Challenger SLDCRF, 37 2. Features and specification PIR detection angle 52 Deg and detection range up to 9M. Low Lux colour CMOS Image Sensor 1.3 M pixels. Max Reso lution : 1.3 M pixels, 1280 x 800 pixels. 2 Capture options: Still image 1P to 3 P burst capturing, and video recording Image performance for video stream: 20 fps at 640 x 480 pixels Built in 32 MB SDRAM for image buffer Built in status LCD display on the r eceiver box Built in SD card slot for SD memory card on the receiver box and support up to 4GB.

• Challenger SLDCRF, 22 When you have completed the coverage area testing, ple ase disconnect the AV cable from recei ver box and TV, or press the SET button from the remote control unit to switch recei ver box back to capturing mode .

• Challenger SLDCRF, 6 Wall mount bracket : Use to mount the SLDCRF to the wall by provided screws EVA foam : Install between wall and wall mount bracket to prevent the water leaking. 2. Control panel view of camera After open the front cover, you will find control panel as below PAIR : It uses to matching pair with receiver box.

• Challenger SLDCRF, 16 1. Connect the SLDCRF to AC power. Please make sure your SLDCRF is rated for your voltage before connection. Incorrect voltage will damage the camera. BLUE WIRE FOR NEUTRAL YELLOW / GREEN WIRE FOR EARTH BROWN WIRE FOR LIVE IMPORTANT Observe correct wiring as failure to do so will damage unit and void warranty We recommend using a supply that you can switch off if required. Once wired correctly, turn on the mains supply. When connected, if the environmental brig htness is not enough

• Challenger SLDCRF, 26 Press the OK button to save and exit to TIME OUT setting. 4. Set the Time out The word TIME OUT will be blinking on the display Press th e OK button and the time out time will now blink. Press the UP or DOWN button to increase or decrease the interval time value in minutes from 01 to 59 minutes. Pr ess the OK to save your selection and exit to Date & Time setting. 5. Set the Date and Time: Thi s SLDCRF uses the 24hr military time format. The word TIME will be blinking on the display. Press the OK button to enter minute setting first. Minute digit will be blink

• Challenger SLDCRF, 8 MENU Button : Press to go t parameter settings. UP/DOWN button : To program the camera parameters as Still image/Video/Resolutions/ Date/Time/Video recording time/ Image and video capturing interval time OK button : Press to confirm the settings. SD memory card slot : To install a SD memory card. Ensure card is unlocked and it firmly pushed in. Press again to release and remove. POWER button : Press to turn on the power of Receiver box while it is power off. DC 5V socket : Power source connector, connecting to provided AC/DC adaptor AV OUT s

• Challenger SLDCRF, 12 POWER button : Press once to turn on the p ower of Receiver box while power is off. Pressing and hold it 2 seconds to turn off the power of Receiver box while it is power on. It is same function of POWER button on the receiver box. AV button : When receiver box is connected to TV by provided AV cable, pressing and hold AV button 2 seconds to switch the receiver box to AV OUT mode from receiving mode . SET button : Pressing and hold 2 seconds to switch the receiv er box back to receiving mode MENU Button : Press to go to parameter settings. UP/DOWN button : To program the camera parameters as Sti

• Challenger SLDCRF, 17 2. Replacing the halogen lamp. CAUTION SLDCRF lamp will be very hot. Always disconnect the power to your SLDCRF before opening. Release the floodlight screw to open the floodlight cover. Carefully remove the Halogen lamp it may be HOT. Insert a new Halogen lamp making sure you do not touch the lamp with bare skin. Halogen Lamp : Max 300W R7S Close the floodlight cover and screw together carefully.

• Challenger SLDCRF, 36 H . Technical Specifications 1. System Requirements and Compatibility Windows 2000/Me/XP /Vista /Win 7. Live viewing is not support with Win 7. Pentium 1G MHz or equivalent processor. 256 MB SDRAM or above. VGA Video Card with 32MB RAM minimum Colour 32 bit or higher. Sound Card. An available CDROM driver and an available USB Port. 20G B free har d disc space. If you have any questions regarding your PC specifications please refer to your PC manufacturer.

• 28 6. Deleting im ages without viewing screen After p ressing the M ENU button, press DWON button once to ente r t he delete mode. The word - dEL - is blinking. Press the OK button to enter the DELETE & FORMAT menu. Using the UP and D OWN buttons to select the desired function. NO -dl (No Delete) , (d -ONE) Delete

Related Products and Documents (Security Camera):

Comparable Devices:

Similar Resources:

• Perel SCAMSETW4 (15 pages) SCAMSETW4 ULTRA-MINI WIRELESS COLOUR CAMERA KIT ENSEMBLE CAMERA COULEUR SANS FIL ULTRA-MINIATURE KIT MET ULTRAKLEINE DRAADLOZE KLEURENCAMERA JUEGO CON CÁMARA COLOR INALÁMBRICA MUY PEQUEÑA ULTRAKOMPAKTES DRAHTLOSES FARBKAMERASET USER MANUAL NOTICE D’EMPLOI GEBRUIKERSHANDLEIDING MANUAL DEL USUARIO BEDIENUNGSANLEITUN …

• JVC LWT0254-001B-H (44 pages) LWT0254-001B-HINSTRUCTIONSTK-C625DOME TYPE CAMERAFor Customer Use:Enter below the Model No. and Serial No. which is located on the body. Retain this information for future reference.Model No. TK-C625Serial No. …

• Lumens CL511 (33 pages) To download the latest version of Quick Start Guide, multilingual user manual, software, or driver, etc., please visit Lumens https://www.MyLumens.com/support CL511 Ceiling Camera (Document Camera) User Manual - English [Important] …

• Toa N-8011MS (1 pages) 3. WIRING3.1. Connection Diagram3.2. The Type of CablesThe types of cables are to be determined according to thefollowing conditions.• Twisted pair wires (such as those used for electronic push-button telephone) are to be used for wiring between theExchange and the stations in principle.• The number of cables pairs laid should be determinedconsidering th …

• Swann SW245-SMD (32 pages) Maxi Day/Night CamSecurity CameraIf this device does not work when you first plug it in,do not take it back to the store.Contact the Swann Helpdesk using our fast e-mail serviceor call us on one of the Toll-Freenumbers shown on the back cover of this [email protected] problems can be quickly and easily fixed with a simplee-mail or a quick chat wi …

• Nortel CallPilot (102 pages) Enterpr ise: CommonSolution Integration Guidefor Communication Server1000/CallPilot/ContactCenter/Telephony ManagerATTENTIONClicking on a PDF hyper link takes you to the appropriate page. If necessary,scroll up or down the page to see the beginning of the referenced section.NN49000-300. …

Comments, Questions and Opinions: