Cisco 7940 - IP Phone VoIP Configuration Manual

Text of Cisco 7940 - IP Phone VoIP User Guide:

• Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides www.yeastar.com Page 2 Table of Cotents Introduction ............................................................................................. 3 Register Cisco IP Phone with MyPBX Manually ......................................... 4 Provisioning for MyPBX ............................................................................ 7

• Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides www.yeastar.com Page 3 Introduction This guide is applicable to CISCO IP 7940, IP7960, SPA 501G, 502G, 504G, 508G, 509G, 514G, 512G, 525G2. Please Note: This guide has been tested with firmware version 7.4.6. Be aware that different firmware versions may have different web interface formats and functionality. This is based on a new phone OR one that has been reset to factory defaults. If in doubt, reset the phone to Factory Defaults.

• Cisco IP Phone Configuration Guides www.yeastar.com Page 4 0BRegister Cisco IP Phone with MyPBX Manually 1. Start up the phone and identify its IP Address – using the menu key on the phone, go to the "Network" option and press the "Select" button. For

• Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides www.yeastar.com Page 5  Set the "Display Name" field to the name you want to appear on the Phone display  Set the "User ID" field to the extension number you want to associate with this phone  Set the "Password" field to the extension's Authentication Password  Set the "Use Auth ID" field to "yes"  Set the "Auth ID" field to the extension's Authentication ID In the "Dial Plan" section, set the "Dial Plan" field to

• Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides www.yeastar.com Page 6 Figure 2-2 5. Go to the “SIP” tab 6. Go to the “NAT Support Parameters” section 7. Set the “Handle VIA rport” field to “yes” 8. Set the “Insert VIA rport” field to “yes” 9. Set the “STUN Enable” field to “yes” 10. Set the “STUN Server” field to “stunserver.org” – to allow the phone to discover its external IP Address, and the port map

• Cisco IP Phone Configuration Guides www.yeastar.com Page 7 Provisioning for MyPBX Important: MyPBX supports phone provisioning for Cisco IP 7940, IP7960, SPA 501G, 502G, 504G, 508G, 509G, 514G, 512G, 525G2. This guide has been tested on Cisco IP 7940 with fir

• Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides www.yeastar.com Page 8 Step1. Disable DHCP Server on your local network. E.g. Disable DHCP Server on Linksys Router. Figure 3-1

• Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides www.yeastar.com Page 9 Step2. Enable DHCP Server on MyPBX. Login MyPBX web interface, go to System  Network Preferences  DHCP Server, enable DHCP server. Figure 3-2 Step3. Configure phones on MyPBX Auto-Provision page. 1) Login MyPBX web interface, go to PBX  Extensions  Phone Provisioning click Add Phone. Figure 3-3

• Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides www.yeastar.com Page 10 2) Fill in the phone detail message on the pop-up window. Input IP Phone’s MAC address, configure Name, Call waiting, Line, Extension, Label, Line active for the phone. Figure 3-4 3) Save it and apply the changes on web.

• Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides www.yeastar.com Page 11 Step4. Save the settings and reboot the IP phone. After you save the changes, system will prompt you to save the changes and reboot to save changes without rebooting. Click OK to reboot the IP phone and provisioning the phone. Figure 3-5 Note: The IP phone will reboot twice to apply th

• Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides www.yeastar.com Page 12 2) Enable DHCP. Step5. Done. <End>

More Instructions:

	Cisco 7940 - IP Phone VoIP Operation & user’s manual 29-01-2024 13	DOWNLOAD
	Cisco 7940 - IP Phone VoIP Operation & user’s manual 29-11-2023 13	DOWNLOAD
	Cisco 7940 - IP Phone VoIP Operation & user’s manual 06-04-2023 80	DOWNLOAD
	Cisco 7940 - IP Phone VoIP Administration manual 26-03-2023 150	DOWNLOAD

Related Products and Documents (IP Phone):

Comparable Devices:

Similar Resources:

• iPECS LIP-8008D (2 pages) Paging ● Dial #00 For “All Call” Paging ● Dial #7 For “Internal” Paging ● Dial #5 For External Paging Voice Mail Dial 999, enter extension then password Default Password: Greetings: Record Greeting Press 8 Messages: Retrieve Message Press 1 Delete Message Press 3# or Delete Soft Key Save/Skip Message Press …

• Yealink SIP-T46S (2 pages) SendDelete1. Press the History soft key when the phone is idle,press or to scroll through the list. 2. Select an entry from the list, you can do the following:Press the soft key to place a call.Press the soft key to delete the entry from the list.Copyright © 2018 CallSwitch.net. All rights reserved.CISCO IP PHONE 8851Quick Start Guid …

• ATCOM AT-640P (6 pages) AT-640PAT-640PAT-640PAT-640PQuickQuickQuickQuick StartStartStartStart GuideGuideGuideGuideATCOM TECHNOLOGY CO. , LIMITEDAT-640PAT-640PAT-640PAT-640PQuickQuickQuickQuick StartStartStartStart GuideGuideGuideGuideISSUE 1.020 11 -7- 28 …

• Cisco 7905G - IP Phone VoIP (238 pages) Corporate HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 526-4100Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)Text Part Number: OL-4277-01 …

• Avaya NN43112-101 (400 pages) Avaya 1120E IP Deskphone with SIP Software User GuideAvaya Communication Server 1000Document Status: StandardDocument Version: 06.04Part Code: NN43112-101Date: October 2010 …

• Polycom Polycom SoundPoint IP 430 (2 pages) SoundPoint® IP 430 Quick User Guide Basic Phone Features Customizing Your Phone Applies to phones running SIP 2.2 or later. For detailed information please consult the comprehensive SoundPoint IP 430 User Guide available at: www.polycom.com/support/voicedocumentation/ ©2007 Polycom, Inc. All rights reserved. Polycom, the Polycom lo …

Comments, Questions and Opinions: