Manualios.com

Casio V-R100 Setup Manual

Casio V-R100 Manual Online:

3.05, 2710 votes
Casio V-R100 User Manual
Casio V-R100 User Guide
Casio V-R100 Online Manual

Text of Casio V-R100 User Guide:

  • Casio V-R100, Content Page # I Introduction 3 II Setup 4-9 III Operations 11 IV Reporting 12-13 V Datacap Equipment 14

  • Datacap Electronic Payment Setup The following pages contain the setup steps for the Casio’s V-R series Android touch terminals to run electronic payment using the new Datacap hardware for both the Canadian and US markets. At the time of writing this manual Mercury Payments is the only processor running on the new Datacap hardware.

  • Casio V-R100, V-R100/7000/7100 Setup The V-R terminals need software version 4.4.2 (dated 10/13/2015) or greater loaded in order to interface to the new Datacap equipment with Mercury for electronic payment (including EMV). The V-R series software versions can be down loaded from Casio’s FTP site, please refer to the software upgrade instructions for terminals requiring at least version 4.4.2. There are two (2) APK files and a SQL file (all files dated 10/15/15) required: Datacap_RPT.apk DataCap.apk Setting_EFT_DataCap.sql

  • Casio V-R100, Please follow the setup procedures below of the three (3) files above after they have been copied into their respective folders: 1. Executing the Datacap APK files – Go to the Android Home screen 2. On the Android home screen depress the File Manager icon and the following screen will appear: 3. Depress the Casio folder line and the following screen will appear

  • 4. Select the Datacap folder to display the APK files 5. Touch each file and install it. Once both files are completely installed, return to the Android home screen and two (2) Datacap icons will appear.

  • Casio V-R100, 6. To setup the Datacap hardware to operate on the V-R select the Datacap EFT Setting V2.1 icon (V2.1 is the software version) and the following screen will appear: 7. The Datacap setting screen options are as follows:  Use Tip Format – Checking this box will print a Tip and Total lines below the Amount line for operations accepting tips on credit cards.  EMV – Only one (1) of the three (3) options is selected; if EMV cards ar

  •  No Chit Under – If a business owner does not want to issue a merchant receipt under a certain dollar amount then enter the dollar amount in this field. Anything under the amount will not generate a merchant receipt requiring a signature.  Balance Inquiry – Select either Print or Display if gift cards are being used and a balance inquiry operation is performed, does the mer

  • Casio V-R100, 8. If the Datacap setting tool confirms the Datacap is connected and the correct software load is installed, depress the OK button to SAVE the settings and go back to the Android home screen and load the Casio Cash Register application. Under the System tab, select the DB Management icon button and the following screen will appear: 9. Select the Script Execution then depress the Browse button and the next screen will appear:

  • Casio V-R100, 10. Run the “V442 Receipt. Sql” and “Setting_EFT_Datacap.sql” files on this screen. Depress the EXECUTE button when the files are highlighted will load the software. When the operation is complete depress the BACK and then CLOSE buttons to return to the System screen and answer OK to re-start the Casio application.

  • Casio V-R100, Operations Once the Datacap APK and SQL files have been executed the Credit, Debit, Gift and EBT tender keys will be flagged automatically to be electronic payment tenders. There are new function keys related to Datacap operations that will appear on the function and report screens that are listed below: EFT VOID/PA – This new key will allow a transaction to be voided when the customer’s card is present. Depressing the key will display the following screen:

  • Casio V-R100, EFT Reporting Going to the Z TAB of the Casio application will display the following screen: Depressing the EFT Report button will display a selection screen of the various reports available with the Datacap as shown below:

  • Casio V-R100,  Local Totals Report – This will summarize totals by credit card type  LOCAL TRANSACTION REPORT – This will print each transaction in the current batch  LOCAL BATCH STATUS – This checks on status of the current batch.  OPEN BATCH – This opens a credit card batch to start the day. In order to use credit cards with the DataCap a batch must be opened first.  CLOSE BATCH – This will close the batch with the customer’s processor at the end of the day. This will close and automatically open a new batch.  CHANGE BATCH NUMBER – This will allow a batch nu

  • Casio V-R100, Datacap Hardware Canadian EMV Datacap TwinTran with TwinTran 3.8X software Verifone VX-810 pin pad POS cable # 7871-00 REV.A Pin pad cable # 1332-30 Rev. Canadian Non-EMV Datacap IPTran LT or TwinTran Server & PDCs MSR(s) POS cable # 7871-00 REV A US EMV (stand-alone) Datacap IPTran LT Verifone VX-805 pin pad POS cable # 7871-00 REV. A Pin pad able # 7877-30 Rev. DS113 US EMV Datacap PDC Verifone VX-805 pin pad POS cable # 7871-00 REV A Pin pad cable # 7877-30 REV DS113 Dat

Related Products and Documents (Touch terminals):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Allied Telesis AR725 Installation and safety manual allied-telesis/ar725-2D8.pdf 05 Feb 2023 56 0.72 Mb
2 Amana NFW7200TW Technical information amana/nfw7200tw-A3C.pdf 01 Aug 2022 28
3 Motorola FOCUS66-B Operation & user’s manual motorola/focus66-b-1ZR.pdf 25 Jun 2023 53
4 Hameg HM 8012 Service manual hameg/hm-8012-O21.pdf 21 Mar 2023 28
5 Patton electronics 3088 Operation & user’s manual patton-electronics/3088-5VB.pdf 19 Oct 2022 48 0.7 Mb
6 Sony Walkman MZ-E710 Operating instructions sony/walkman-mz-e710-28N.pdf 17 Jun 2022 2

Similar Resources:

  • Opzoon

    OFR-D1

    (2 pages)
    Opzoon Technology Co.,Ltd.All rights reserved.400-706-8366 [email protected] www.opzoon.comManualOutlookProduct SpecificationInstallation GuideFingerprint identification areaFront ID card identification areaID card identification areaTouch panelPower switchMicrophoneProduct modelOFR-D1Facial anti-counterfeit Recognition distanceRecognition modeA …
  • Honeywell

    VISTA Series

    (46 pages)
    HoneywellVISTA SeriesProductsUserManualVersion: 1.0Date: Dec,2011CAFP100FCAFP100FSCAFP100FIDCAFP100FICAboutThisManualThismanualintroducestheinterfaceandmenuoperationsoftheHoneywellVISTAseriesproducts.Forthepr oductinstallation,see� …
  • ADS-tec

    VMT8000 series

    (2 pages)
    Schnellstartanleitung VMT8000 / VMT7000 Serie DZ-HAND-93175-0/C 2019-11-11 V2.0 © ads-tec Industrial IT GmbH • Heinrich-Hertz-Str.1 • 72622 Nürtingen • Germany 1. Sicherheitshinweise 3. Inbetriebnahme ACHTUNG Montagearbeiten am Gerät sind nur in gesichertem und spannungsfreiem Zustand erlaubt! Hinweis: Achten Sie bei der Handhabung …
  • Lenze

    9372BB

    (5 pages)
    ba_VPTOabLMMPVQTPRiNiOiPHrd JrdmbmbuQuRuSuTuUuVuNMefildkaOUbNbObPbQbRPV^N^O^P^QpqpqRVNOTSOPQTSPNRRNRNNRmq`qN qOmbrstdäçÄ~ä aofsboavfjmfã~ñjã~ñc~áäpe modm~ê Om~ê~MMRNNORM êéãj`qoiJkJ^`qpefcq mod pqlmhPRKMMNPorkHOQs …
  • GIGA-TMS

    GUARDSCAN GS120

    (24 pages)
    JAN 2008REGISTERED TO ISO 9001:20008F, No.31, Lane 169, Kang-Ning St., Hsi-Chih Taipei Hsien, 221 TaiwanPhone: (886) 2-2695-4214FAX: (886) 2-2695-4213www.gigatms.com.tw1 …
  • Bilanciai

    PS440-A Series

    (14 pages)
    Italiano English Français Deutsch 81320396 05/11/2018 Alimentatore PS440-A/xxx per terminali di pesatura Istruzioni di sicurezza Power supplier PS440-A/xxx for weighing terminals Safety instructions Alimentation PS440-A/xxx pour indicateurs de pesage Consignes de sécurité Versorgungsgerät PS440-A …

Comments, Questions and Opinions: