Manualios.com

Cisco 7940 - IP Phone VoIP Configuration Manual

Cisco 7940 - IP Phone VoIP Manual Online:

4.05, 1711 votes
Cisco 7940 - IP Phone VoIP User Manual
Cisco 7940 - IP Phone VoIP User Guide
Cisco 7940 - IP Phone VoIP Online Manual

Text of Cisco 7940 - IP Phone VoIP User Guide:

  • C isco IP Phone Configuration Guides 2/12 Table of Cotents Introduction ..................................................................................................................................... 3 Register Cisco IP Phone with MyPBX Manually ................................................................................. 4 Provisioning for MyP

  • Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides 3/12 Introduction This guide is applicable to CISCO IP 7940, IP7960, SPA 501G, 502G, 504G, 508G, 509G, 514G, 512G, 525G2. Please Note: This guide has been tested with firmware version 7.4.6. Be aware that different firmware versions may have different web interface formats and functionality. This is based on a new phone OR one that has been reset to factory defaults. If in doubt, reset the phone to Factory Defaults.

  • Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides 4/12 0BRegister Cisco IP Phone with MyPBX Manually 1. Start up the phone and identify its IP Address – using the menu key on the phone, go to the "Network" option and press the "Select" button. For this example we will assume the IP Address of the phone is 192.168.5.126, and IP Address of the MyPBX machine is 192.168.5.150. 2. Point your browser to the web interface of the phone: http://192.168.5.126 3

  • Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides 5/12  Set the "Display Name" field to the name you want to appear on the Phone display  Set the "User ID" field to the extension number you want to associate with this phone  Set the "Password" field to the extension's Authentication Password  Set the "Use Auth ID" field to "yes"  Set the "Auth ID" field to the extension's Authentication ID

  • Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides 6/12 Figure 2-2 5. Go to the “SIP” tab 6. Go to the “NAT Support Parameters” section 7. Set the “Handle VIA rport” field to “yes” 8. Set the “Insert VIA rport” field to “yes” 9. Set the “STUN Enable” field to “yes” 10. Set the “STUN Server” field to “stunserver.org” – to allow the phone to discover its external IP Address, and the port mappings that will be applied to the traffic sent and received by the phone ,the default port is 5060 for TCP and 10000

  • Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides 7/12 Provisioning for MyPBX Important: MyPBX supports phone provisioning for Cisco IP 7940, IP7960, SPA 501G, 502G, 504G, 508G, 509G, 514G, 512G, 525G2. This guide has been tested on Cisco IP 7940 with firmware version pos3.08.12.00. Be aware that different firmware versions may have different web interface formats and functionality. Here we guide you how to do phone provision for Cisco 7940/7960. 1. Verify Firmware Installed on your Phone Make sure your Ci

  • Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides 9/12 Step2. Enable DHCP Server on MyPBX. Login MyPBX web interface, go to System  Network Preferences  DHCP Server, enable DHCP server. Figure 3-2 Step3. Configure phones on MyPBX Auto-Provision page. 1) Login MyPBX web interface, go to PBX  Extensions  Phone Provisioning click Add Phone. Figure 3-3

  • Cisco IP Phone Configuration Guides 10/12 2) Fill in the phone detail message on the pop-up window. Input IP Phone’s MAC address, configure Name, Call waiting, Line, Extension, Label, Line active for the phone. Figure 3-4 3) Save it and apply the changes on web.

  • Cisco 7940 - IP Phone VoIP, Cisco IP Phone Configuration Guides 11/12 Step4. Save the settings and reboot the IP phone. After you save the changes, system will prompt you to save the changes and reboot to save changes without rebooting. Click OK to reboot the IP phone and provisioning the phone. Figure 3-5 Note: The IP phone will reboot twice to apply the configuration take effect. When done, you can see extension 500, 501, 503 have been registered on the screen of Cisco IP phone. Figure 3-6 Remark: The factory default setting of DHCP for IP Phone is “enable”, so you can skip this step. If the DHCP is disabled, please f

Related Products and Documents (IP Phone):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Aurora Multimedia DIDO LT Installation manual aurora-multimedia/dido-lt-GB2.pdf 12 Jan 2023 44
2 NEC SL1100 Operation & user’s manual nec/sl1100-7O4.pdf 28 Jul 2022 12
3 Pioneer DEH-P6200 Service manual pioneer/deh-p6200-L2S.pdf 11 Sep 2022 67
4 Yamaha XT250D Owner's manual yamaha/xt250d-5S8.pdf 16 Dec 2023 100
5 Cobra CPI 850 Operating instructions manual cobra/cpi-850-Q2F.pdf 19 Nov 2022 11 0.62 Mb
6 Uniden POCKET MAX UHO45XP Operating manual uniden/pocket-max-uho45xp-WO1.pdf 20 Sep 2022 20 3.21 Mb

Similar Resources:

  • Polycom

    SoundStation IP 7000

    (7 pages)
    © 2018 AT&T Intellectual Property. All rights reserved. AT&T and the Globe logo are registered trademarks of AT&T Intellectual Property. CALNET 3: AT&T Voice DNA: Quick reference guide – Polycom SoundStation IP 7000 CALNET 3: AT&T Voice DNA®: Quick reference guide: Polycom® SoundStation® IP 7000 Version 1.0 …
  • Samsung

    OfficeServ

    (100 pages)
    Every effort has been made to eliminate errors and ambiguities in the information contained in this guide. Any questions concerning information presented here should be directed to SAMSUNG TELECOMMUNICATIONS AMERICA, 1301 E. Lookout Dr. Richardson, TX. 75082 telephone (972) 761-7300. SAMSUNG TELECOMMUNICATIONS AMERICA discla …
  • Panasonic

    HYBRID IP-PBX KX-TDA100

    (40 pages)
    Hybrid IP-PBXUser Guide for KX-TD7896KX-TAW848/KX-TDA50Model KX-TDA100/KX-TDA200This manual is designed to be used with the KX-TD7896 Wireless PT (Wireless Proprietary Telephone) and a Panasonic KX-TAW/TDA series PBX (Business Telephone System).Please read this guide before using and save for future reference.Please use only the battery provided and charge …
  • Fanvil

    D800

    (4 pages)
    ",if"FanvilInstruction~~~,"0800Android IP Video PhoneOverviewIncludedAccessories"'2-The Appearance of Product"-..Front view and keypad function:r----------c~;::::::+-lndlicatorLight1Handset---IH-- …
  • Avaya

    4601

    (2 pages)
    4601 4601 VoIP Courtesy Telephone User Guide Telecommunications Center Blair 153 417-836-8580 http://ntg.missouristate.edu Feature Instructions Conference To add another party to a call- 1. Press [conference] 2. Dial the next phone number 3. Press [conference] again to join the call Note: If no answer or busy, press the [drop] button. *Note: Usin …
  • Snom

    D315

    (98 pages)
    © 2016 snom technology AG Snom Technology AGWittestr. 30 G13509 Berlin, DeutschlandTel. +49 30 39 83 3 0Fax +49 30 39 83 31 11offi [email protected] Snom Inc.136 Harvey Road, Suite A102Londonderry, NH 03053, USATel. +1 339 227 6160 Fax +1 339 227 6180o ce.us@ …

Comments, Questions and Opinions: