CohuHD Costar 3430HD Installation And Operation Manual
|
49 Setting the DST 1. Click Setup > Common > Time, and then click the DST tab. 2. Select Enable DST, set the start time, end time, and DST bias. 3. Click Save. Serial Port Mode Configuration The RS485 serial port is used for data exchange with the third-party device. Serial port settings on the camera should be consistent with that of the connected third-par
28 Item Description 90° Clockwise 90° Anti-clockwise 3. To restore default settings in this area, click Default. Exposure 1. Click Setup > Image > Image and then click Exposure. 2. Set the parameters as required. The following table describes some major parameters. Parameter Description Exposure Mode Select the
CohuHD Costar 3430HD, 36 Media Stream Configuration Media Stream You can display the established media streams from a camera. You may also set the camera so it transmits code streams by the UDP or TCP protocol to a specified IP address and port number. The settings can be saved and take effect after the camera is restarted. NOTE! This function is not supported by some models, please see the actual model for details. Choosing a transport protocol based on your actual needs and network performance. Generally speaking, TCP enables better image quality than UDP but also causes higher latency. 1. Click Setup > Video > Media Stream. 2. Click
CohuHD Costar 3430HD, 53 2. Click and hold the mouse button, and then drag from the top down to specify an area. 3. To restore the original image size, click in the enlarged area, or drag from the bottom top. 4. To exit, click . (FUTURE) Video Playback and Download with Edge Storage NOTE! Edge storage refers to recording video to the memory card of a frontend device (mostly a camera). Local recording refers to recording video to a local PC client. Before you play back video with edge storage, check that the camera has been installed with a
CohuHD Costar 3430HD, 17 NOTE! To manually load the ActiveX, type http://IP address/ActiveX/Setup.exe in the address bar and press Enter. The default password is used for your first login. To ensure account security, please change the password after your first login. You are recommended to set a strong password (no less than eight characters). The camera protects itself from illegal access by limiting the number of failed login attempts. If login fails six times consecutively, the camera locks automatically for ten minutes. 3. Enter the username and password, and then click Login. For the first login, use
CohuHD Costar 3430HD, 3 Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. Thank you for purchasing our product. If there are any questions, please contact the authorized dealer. PART ONE – QUICK USER QUIDE IMPORTANT INFORMATION Legal Notice Attention: To ensure account security, please change the password after your first login. You are recommended to set a strong password (no less than eight characters). The contents of this document are subject to change with
CohuHD Costar 3430HD, 44 Memory Card Storage NOTE! This function is not supported by some models, and may vary with models, please see the actual model for details. Edge storage is recommended when the camera operates in stand-alone mode. When the camera is managed by the central management server, you need to stop edge storage to avoid affecting the cache post recording service. Setting Edge Storage Edge storage is used to save video data and snapshots to the memory card directly. Edge storage is recommended when the camera is running in stand-alone mode. Manual storage The camera records live video repeatedly if manual storage is enabled. 1. Click Setup > Storage
CohuHD Costar 3430HD, 16 NOTE! The IP address 192.168.2.150 in this example is the default IP address. Please replace it with the actual address of your camera if it has been changed. (Optional) Modify user access control settings Before you access the camera, follow the steps to set User Account Control Settings to Never notify. Logging Into the Web Interface The default static IP address of the camera is 192.168.2.150, and the default subnet mask is 255.255.255.0. DHCP is turned on by default. If a DHCP server is used in the network, the IP address of your camera may be assigned dynamically, and you need to use
CohuHD Costar 3430HD, 55 2. Adjust the camera zoom to the desired view. 3. Adjust focus mode as needed to obtain the optimal image. 4. Click to add it as a preset. Enter a number and name for the preset and then click Submit. Go to a preset 1. On the Live View page, click Preset on the control panel. 2. Click for a preset. The PTZ camera goes to the selected preset. Delete a preset 1. On the Live View page, click Preset on the control panel. 2. Click for a preset and then confirm the delete. 1 2 1 2
CohuHD Costar 3430HD, 14 PART TWO - NETWORK CAMERA USER MANUAL Network Connection Before accessing a network camera (also known as IP Camera or IPC) from a PC, you need to connect the network camera to the PC directly with a network cable or via a switch or router. IPC PC Use a Shielded Twisted Pair (STP) cable to connect the network interfaces of the network camera and the PC. IPC Switch or Router PC Use Shielded Twisted Pair (STP) cables to connect the network interfaces of the camera and the switch or router. Login Preparation After you have completed
CohuHD Costar 3430HD, 40 Configuring Temperature Detection Alarm After the upper and lower temperature limits are set, the camera reports an alarm when the set temperature limit is reached. A PTZ camera may go to a preset and output an alarm when a temperature alarm is reported. NOTE! This function is not supported by some models, please see the actual model for details. The alarm triggered actions may vary with models, please see the actual Web interface for details. 1. Click Setup > Events > Temperature Alarm. 2. Set a lower limit for high temperature alarm and an upper limit for low
CohuHD Costar 3430HD, 20 Network Configuration TCP/IP Modify communication settings such as the IP address for the camera so that the camera can communicate with other devices. NOTE! After you have changed the IP address, you need to use the new IP address to log in. The configurations of DNS (Domain Name System) server are applicable when the device is accessed by domain name. Static Address 1. Click Setup > Network > TCP/IP. 2. Select Static IP from the IP Obtain Mode drop-down list.
5 Overview This user guide is suitable for the following models: 3432-1000 Features Resolution: 1080P Optical Zoom: 30X Day and night automatic conversion function (ICR) Supports 3D noise reduction Video Output: IP H.264 encoding, higher compression efficiency 3 data stream function will satisfy
CohuHD Costar 3430HD, 2 Contents PART ONE – QUICK USER QUIDE ................................................................................................................................................. 3 IMPORTANT INFORMATION ........................................................................................................................................................ 3 OVERVIEW .................................................................................................................................................................................. 5 FEATURES .......................
CohuHD Costar 3430HD, 54 2. Search for video within a specified period. The results will be shown in a list. 3. Select your video and click Download. The video will be downloaded to your local path from the memory card (local path can be changed in System Configuration). 4. Click Open Folder to show the folder where the downloaded video is saved. Zoom Control Control Toolbar Item Description Preset Select a preset and then click . The PTZ camera goes to the selected preset. To add a preset, click . To delete a preset
CohuHD Costar 3430HD, 43 NOTE! This function is not supported by some models, please see the actual model for details. 1. Click Setup > Events > Alarm Output. 2. Select the alarm and set the alarm name. 3. Set the status to Normally Open (default setting) and set the alarm duration. 4. Set actions to be triggered by an output alarm and the plan. For the detailed steps, see the descriptions of alarm-triggered actions in Configuring Motion Detection Alarm 5. Click Save. CAUTION! Strictly follow the sequence when powering on the devices to avoid damaging camera components: 1. Check that the alarm type is set to Normally Open (default setting), and tha
CohuHD Costar 3430HD, 29 Shutter (s) Shutter is used to control the light that comes into the lens. A fast shutter speed is ideal for scenes in quick motion. A slow shutter speed is ideal for scenes that change slowly. Note: You can set a shutter speed when Exposure Mode is set to Manual or Shutter Priority. If Slow Shutter is set to Off, the reciprocal of the shutter speed must be greater than the frame rate. Gain (dB) Control image signals so that the camera outputs standard video signals according to the light condition. Note: You can set this parameter only when Exposure M
CohuHD Costar 3430HD, 38 1. In the Detection Area area, click to add a new detection area. To delete a detection area, click . 2. Click and drag the mouse to set a detection area. 3. Set the detection sensitivity, object size, and history for the camera to decide whether to report a motion detection alarm. Moving the slider to the right increases detection sensitivity. When the extent of motion within the detection area exceeds the set object size, and if the duration of motion exceeds the set duration, the camera reports an alarm. Motion detection results are shown in real ti
DOWNLOAD |
Nikon COOLPIX 8800 IP Camera Specifications
COOLPIX 8800 |
Nikon Capture 3 IP Camera Install manual
Capture 3 |
Vivitar Vivicam 55 IP Camera Getting to know
Vivicam 55 |
Minolta MAXXUM 9XI - PART 2 IP Camera Manual
MAXXUM 9XI - PART 2 |
Aim Smartycam IP Camera Operation & user’s manual
Smartycam |
Insignia NS-DSC7B09 IP Camera Quick start manual
NS-DSC7B09 |
Samsung PL100 IP Camera Quick start manual
PL100 |
GoPro Hero 3 White edition IP Camera Operation & user’s manual
Hero 3 White edition |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Draytek | Vigor2710 Series | Operation & user’s manual | draytek/vigor2710-series-FPW.pdf | 06 Aug 2023 | 232 | |
2 | Q-See | QSDNV | Operation & user’s manual | q-see/qsdnv-5GZ.pdf | 01 Jun 2023 | 1 | 0.56 Mb |
3 | Konica Minolta | Magicolor 2530 DL | Reference manual | konica-minolta/magicolor-2530-dl-M86.pdf | 15 Aug 2023 | 144 | |
4 | Doro | COMFORT 1010 | Manual | doro/comfort-1010-41T.pdf | 21 Mar 2023 | 14 | 0.67 Mb |
5 | Holux | M-241 | Manual | holux/m-241-327.pdf | 09 Feb 2023 | 6 | |
6 | LG | GE20LU10 - Super Multi | Specifications | lg/ge20lu10-super-multi-52C.pdf | 21 Dec 2022 | 2 |
Lorex
Lorex Technologies Inc. Copyright © 2011 Lorex Technologies Inc. As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OECable Extension Options Problem SolutionNo Picture/Signal …
VANTAGE LDC6080 Series(2 pages) |
Foscam
V50.01Model:Model:Model:Model: FI89FI89FI89FI89 09090909 WWWWQuickQuickQuickQuick InstallationInstallationInstallationInstallation GuideGuideGuideGuideIndoorIndoorIndoorIndoor WirelessWirelessWirelessWireless IPIPIPIP CameraCameraCameraCameraBlack WhiteForForForFor WindowsWindowsWindowsWindows OSOSOSOS ---------------------------- PagePagePagePage 1111ForFor …
FI8909W(29 pages) |
Cisco
For teleworkers, small offices, small to medium-sized businesses, and enterprise branch and head officesCisco Router GuideWinter 2009 V.5Cisco Router GuideCisco Integrated Services Routers: Cisco 850, 870, 1800 (fixed), 1800 (modular), 2800, 3800 Series;Cisco Aggregation Routers: Cisco 7200, 7300, ASR 1000, 7600, Catalyst 6500 SeriesWinter 2009 V.5Argent …
850 Series(120 pages) |
Arecont Vision
AV13051.3 Megapixel H.264 IP MegaVideo cameraAV1305 (Color) AV1305DN (Day/Night) AV1305-AI (Color Auto-Iris) H.264 camera seriesThe AV1305 series network camera is part of Arecont Vision’s full line of H.264 megapixel cameras. This fully compliant implementation of H.264 (MPEG 4, Part 10) is capable of sustaining over 80 billion operations p …
MegaVideo AV1305(2 pages) |
Foscam
Customer CareIf you have any questions regarding your product,please contact Foscam Customer Care.Email: [email protected] QUICK STARTGUIDEEQE10003
…
E1(8 pages) |
Eaton
DOCUMENT 9701 REVISION G December 18, 2019 Instruction Manual ELEVATED APPROACH LIGHT 98240-X (PAR-56 LAMP) Eaton Crouse-Hinds Series Airport Lighting Products 1200 Kennedy Road Windsor, CT 06095 Copyright © 2019 Cooper Technologies Company
…
Crouse-hinds series(18 pages) |
Hoover Vacuum Cleaner PRO STAIR#2147K6: PRO STAIR Vacuum Cleaner User instructions PRO STAIR, 12 |
Frigidaire Refrigerator FRT18KC3BFrigidaire Product User Manual: FRT18KC3B PDF Factory parts catalog - 5397NZ FRT18KC3B, 11 |
Yamaha Electronic Keyboard Tyros SeriesYamaha Product User Guide: Tyros Series PDF Manual - 99P1H9 Tyros Series, 16 |
Panasonic Cell Phone F77GCell Phone Operation & user’s manual (Panasonic F77G) F77G, 544 |
Plantronics Telephone C4230C4230 Specifications - A46S93 C4230, 2 |
Rockford Fosgate Subwoofer RFZ2408RFZ2408 Installation and reference manual - 53NQ39 RFZ2408, 4 |
NordicTrack Exercise Bike NTEX14807.0Operation & user’s manual for NordicTrack NTEX14807.0 Exercise Bike NTEX14807.0, 24 |
Philips Home Lighting 579184816Home Lighting #I69Q17 579184816, 25 |
Shark Vacuum Cleaner Navigator Lift-AwayShark Navigator Lift-Away Vacuum Cleaner Instructions manual Navigator Lift-Away, 48 |
Valcom Switch V2972Technical specifications for Valcom V2972 Switch V2972, 2 |
IDEAL INDUSTRIES Thermometer 61-685PDF Guide (@58Z6EU), IDEAL INDUSTRIES 61-685 Thermometer (Wed 09.2023) 61-685, 12 |
Sony Projector VPL-CX4VPL-CX4 Brochure & specs - 4X8O14 VPL-CX4, 4 |