Akura Digital LCD Color TV Receiver Operation Instructions Manual

Text of Akura Digital LCD Color TV Receiver User Guide:

• Akura Digital LCD Color TV Receiver, 13 14 15 16 17 18 19 1 4 10 3 11 12 5 6 7 8 2 9 3. Appearance 1.Remote receiving window 2.Menu 3.Confirm OK (DTV mode)/ Auto search (TV mode) 4.Volume - /Leftward 5.Volume+/Rightward 6.Channel - /Downward 7.Channel+ /Upward 8.Power indicator 9. ON/OFF DVB/ATV/AV Press and hold for 3 seconds to turn off TV set 10.Telescopic antenna 11.TFT-LCD screent 12.Base support 13.Stereo Earphone jack 14.DVB-T AV Output jack 15.AV Input jack 16.12V DC Input jack 17.Loudspeaker 18.Antenna input jack 19.Antenna output jack Shift

• 8. In order to receive a clearer picture Adjust the length, angle and direction of the telescopic antenna to obtain optimum image. Draw back the antenna from the butt end after using it . ! Caution In case the signal intensity is too weak, the image will remain inferior whatever you adjust the antenna, and cause loud noise wave, shaking image and inferior sou

• Akura Digital LCD Color TV Receiver, Teletext Display This DVB-T TV set supports Teletext Display. Press Teletext key to start the function. Press CH+/CH- key or input the page number on the remote control to change display pages. Press EXIT key to return to normal playback. To display Teletext, the program signal must contain teletext data. Electronic Program Guide This digital TV set supports Electronic Program Guide (EPG) function. Press EPG key to start the function. To run EPG, the program signal must contain EPG data. EPG Time Table Press VOL+ key to enter EPG Time Table.

• Table of Contents 1.Precautions 2.Accessories 3.Appearance 4.Remote Control Application 5.Basic Operation Methods 6.DVB-T Menu Operation 6.1.Auto installation 6.2.Installation setup 6.3.Program receive and shift 6.4.Program search function 6.5.Main menu option 6.6.Parental control 6.7.System setup option 6.8. 6.9.Game menu option 6.10.

• Akura Digital LCD Color TV Receiver, Step 8 Step 9 Step 10 Step 11 16.Auto searching...... The channel list display. 17.Auto Search has been finished. Data saving...... 18.Auto Search has been finished. Press CH+/CH- to watch the TV program. 15.Auto searching......

• Akura Digital LCD Color TV Receiver, Date setting Time setting Press CH+ or CH- key to move the cursor to Set Date item. Press VOL+ or VOL- key to move the cursor to desired position. And enter correct Date. Press OK key to confirm. Press CH+ or CH- key to move the cursor to select other items. Then press MENU key, the system will save the setting and return to System Setting menu. Press CH+ or CH- key to move the cursor to Set Time item. Press VOL+ or VOL- key to move the cursor to desired position. And enter correct Time. Press OK key to

• Akura Digital LCD Color TV Receiver, Select Programs To Be Locked Press CH+ or CH- key to move the cursor to select the program to be locked. (More than one can be selected.) Press OK key to confirm or press OK key again to cancel. Press MENU key several times till the system saves the setting and returns to normal playback. To protect programs, you must start Channel Lock function, Protected Program To display protected programs, you must input the correct PIN. Please input four digit number and press OK key to confirm. All system PIN can be set under this m

• Akura Digital LCD Color TV Receiver, 6.5.Main Menu Operation Program Edit Table Press MENU key to display Main Menu, then press CH+ or CH- key to move the cursor to select Program Editing item. Press VOL+ to enter Program Editing function. There are three options in it :TV program list, Radio program list and the sort of order for programs. There are three options in Program List Press CH+ or CH- key to move the cursor to select TV Program List or Radio Program List. Press OK to enter. (The setting for Radio program list is the same as for TV program list. Below is an exampl

• Akura Digital LCD Color TV Receiver, TV/RADIO: Shift between TV and Radio (DVB mode only). Sleep: Off-time setup. You can set Sleep Timer to automatically turn off the TV set within 120 minutes. P/N(-/--) switch (in DVB mode) : a. Press this button to to color system of output video signal . b. Press this button to select channels in ATV mode. Press the button, then press 0-9 digital keys to chose a two-digit or three- digit channel. Return: Press this button to return to the previous channel. Press it again to return to the current channel. DVB/ATV/AV shift: Press this button to shift between Digital TV, analogue TV and Vedio/Audio(AV). +/-: Bright, contrast. Color, and TINT analog quantity

• Akura Digital LCD Color TV Receiver, 10. Technical Parameters General Technical Parameters Display Device: Color TFT-LCD Receiving Channel: DK/I 49.75MHz~847.25MHz BG 48.25MHz~847.25MHz Sound System: DK I BG L Screen Size: 7 inches Loudspeaker: two 40mm round loudspeaker. Power Supply: DC12V 14W Connecting Terminal: External antenna input/output jack, stereo earphone jack, Audio / Video (AV) input jack, DVB-T AV output jack, External power supply input jack. Applicable Power Supply: Two options: 1.AC Power supply : AC adapter

• Akura Digital LCD Color TV Receiver, 1 2 3 4 5 6 7 8 9 5.6.Connection of AV Output Connect the yellow port of the AV output head to video jack, the white port to the audio left track plug, the red port to the audio right track plug. Then insert the AV head into the AV/OUT jack. 1.The AV output function is available when using DVB function only. 2.OSD language is locked as English when using AV function. Notice The OK/Auto key on panel is available as confirm OK only when DVB function is operating. In ATV mode, press and hold for 5 seconds to realize auto search; In AV mode, this key does not work. Basic operation met

• Akura Digital LCD Color TV Receiver, Press CH+ or CH- to select Sound system item Then press VOL+, the Sound System will display in the order of I, DK and BG. Notice 1.Notes on Sound System: 6.0M means I, 6.5M stands for DK(L) , and 5.5M is BG, please set the Sound System at local one. 2.Color system A. When the sound system is I, the color system is PAL-I B. When the sound system is DK, the color system is PAL-DK or SECAM-DK C. When the sound system is BG, the color system is PAL-BG or ECAM-BG D. When the sound system is L, the color system is SECAM-L. 3.If there is picture with no sound or with noise, please check that the Sound System is set correctly first. PRESET POSITI

• Akura Digital LCD Color TV Receiver, RESET Press MODE key repeatedly to enter Reset menu. Press + or - key to reset the Brightness, contrast, color, TINT and Volume to 50. 6.13.Off-time Setting Off-time setting Press Sleep key to enter the Off-time screen. Press the Sleep key repeatedly to set the time. The maximum is 120 minutes. Notice In case the signal intensity is too weak, the image will appear mosaic like diamonds and sound halts, which is not TV fault. If the image remains mosaic when using telescopic antenna, please try to use the external antenna or CATV.

• Akura Digital LCD Color TV Receiver, Phenomena Possible Causes No picture, no sound No image No sound Diamonds in picture No signal The antenna is not adjusted correctly; The signal at the receiving place is too weak 9. Before you request for repair Phenomena below does not necessarily mean the failure with the TV set. Please check the following before you request for repair. The antenna is not adjusted correctly; The Channel or Country is not selected. If so, reset it. The sound is turned to minimum . The earphone is not plugged in. ERASE functions are under too weak signal. Sound system is not correctly set in ATV mode. Th

• Akura Digital LCD Color TV Receiver, Special Notice ! ! Warning! 1. For the sake of safety for yourself and others, please do not watch or turn on the TV set while driving. 2. It is very dangerous to watch or operate TV while driving. A few highlights or dark spots may occur on the LCD screen. It is a very common phenomenon of the active matrix display technology, and does not mean any defects or faults. Never try to repair this machine by yourself. In case of any fault or failure, please turn off the display at once, and notify our Company or the correspondin

• Akura Digital LCD Color TV Receiver, 6.4.Program Search Function Program Search Menu For the first installation of the TV set, it is recommended to perform program search function. So you can renew the channel list and receive program picture normally. If program parameters have been renewed, you must run program search function again and renew the channel list of the TV set. Manual Search Under the Installation Menu, press CH+ or CH- key to move the cursor to select Manual Search item. Press OK key to continue the next step. Manual search can be used to search the certain frequency which is existent. . It is suitable for the professional to operate. Manual Search Setup Under the main m

• Akura Digital LCD Color TV Receiver, 7.2. System Press CH+ or CH- to select System item, press VOL- or VOL+ then (language), Time, (picture mode) and Blue back will display on the screen as illustrated below: SYSTEM ENGLISH TIME OFF 16:9 BLUE BACK ON Press CH+ or CH- to select item Press VOL - / VOL + to realize the selection of German, French, Dutch, English, Spanish, Portuguese, Italian OSD menu language. Press CH+ or CH- to select Time item. SYSTEM ENGLISH TIME

• Akura Digital LCD Color TV Receiver, ENGLISH TIME OFF 16:9 BLUE BACK ON SYSTEM ENGLISH TIME OFF 16:9 ONBLUE BACK SYSTEM Press CH+ or CH- to select item. Press VOL - / VOL + to shift the screen mode betweem 16:9 and 4:3. Press CH+ or CH- to select Blue back item. Press VOL - / VOL + to realize the ON/OFF of Blue Back under no signal. 7.3.Preset Press CH+ or CH- to se

• Akura Digital LCD Color TV Receiver, 6.10.DIY Menu Setting You can set up a personal menu in this function. Under Main Menu, Press CH+ or CH- key to move the cursor to select P Style item. Press OK key to confirm. ersonal Menu Color Setting Press CH+ or CH- key to move the cursor to select Menu Color. Press VOL+ or VOL- to select color. Press CH+ or CH- key to move the cursor to set other items. Then press EXIT key to save setting and return to Main Menu. Press EXIT key several times till the system saves the setting and returns to normal playback. Transparent Level Press CH+ or CH- key to move the cursor to select Transparent Level item. Press VOL+ or VOL- to select lev

• Akura Digital LCD Color TV Receiver, The first Audio language setting Under the Language Menu, press CH+ or CH- key to move the cursor to select OSD language item. Press VOL+ or VOL- key to select OSD language. Press CH+ or CH- key to move the cursor to select other items or press OK key to confirm. Then the system will return to System Setting menu. OSD Language Under the Language Menu, press CH+ or CH- key to move the cursor to select 1st Audio Language item. Press VOL+ or VOL- key to select language. Press CH+ or CH- key to move the cursor to select other items or press OK key to confirm. Then

• Press CH+ or CH- to select Remember item Press VOL- or VOL+ to choose ON under the item Remember, and then it will display this channel upon changing program. In Off status, it will not display the Channel Number. Press CH+ or CH- to select Auto search item Press VOL- or VOL+ to start Auto Search, and it will put into automatic memory and storage upon completion of A uto Se

• Akura Digital LCD Color TV Receiver, 6.8.Accessory Setting Under the System Setting Menu, press CH+ or CH- key to move the cursor to select Accessory item. Press VOL+ to enter Accessory menu. System Information Under the Accessory Menu, press CH+ or CH- key to move the cursor to select System Information item. Press OK key to enter next step. System Version Display the Version of TV set. Press EXIT key then the system return to Accessory menu. Press MENU key several times return to normal playback. Set Factory Default Under the Accessory Menu, press CH+ or CH- key to move the cursor to select Factory Default item. Press OK key to enter next step.

• Akura Digital LCD Color TV Receiver, 5. Basic Operation Methods Basic interface connection 5.1.Connection of Power Supply: Align the power supply plug on AC adapter with the jack on the machine cover marked with DC12V. 5.2.Connection of External Antenna: Unplug the telescopic antenna plug, then plug the attached antenna plug into the antenna jack on the TV set If the earphone is applied, the sound only transmits through the earphone, and no sound is available from the loudspeaker of the TV set. Notice 5.4.Connection of Stereo Earphone: Align the earphone plug with the earphone jack on the TV set, and just plug in . 5.3.Connection of

• Border Pattern Press CH+ or CH- key to move the cursor to select Border Pattern.. Press VOL+ or VOL- to select Round or right-angle item. Press CH+ or CH- key to move the cursor to set other items. Then press EXIT key to save the setting and return to Main Menu. Press EXIT key several times till the system saves the setting and returns to normal playback. Cover Style Press CH+

• Akura Digital LCD Color TV Receiver, Select language menu Press VOL+/VOL- to select language menu. Press CH+ or CH- to move the cursor to other items. Set time zone Press VOL+/VOL- to set local time zone. Press CH+ or CH- to move the cursor to set other items. Press VOL+/VOL- to move the cursor to BACK or NEXT item. Press OK key to confirm. BACK: Skip to the last menu page. NEXT: Skip to the next menu page. Skip to the next menu page

Related Products and Documents (TV Receiver):

Comparable Devices:

Similar Resources:

• Winegard TR-6018 (5 pages) tripod, and push down until the level snaps into place. Loosen the lock knobs on the tripod base.leg, and slide the leg into the tripod base until the leg locks into the desired position. Repeat for all three legs.until the bubble rests in the center of the bubble level. The tripod is now level. Tighten the lock knobs, and remove the bubble …

• Roku Ultra (2 pages) Ultra© 2016 Roku, Inc. All rights reserved. ROKU and the ROKU logo are the trademarks or registered trademarks of Roku, Inc.4100000299-R01Need more help getting started?Besoin d’ aide pour démarrer?¿Necesita más ayuda para comenzar?Set-up guidesMise en place des guidesVer guías de configuraciónAdding channelsAjout de canauxAgregar canalesVideo tutor …

• Tauras TV3K - TXT (8 pages) This file is provided FREE OF CHARGE from the electromaniacs.com community You are free to distribute this file to other persons who needs it , but without of charge Also on http://electromaniacs.com you can find thousands of service manuals , schematics free of charge …

• AT&T U-verse TV (2 pages) Having trouble?Many issues can be resolved in two simple steps: 1. Check your connections.Verify that cables, cords, and filters on all devices are connected as specified in steps 1A–1E. Make sure:• The dual-port filter (optional) is plugged into the wall jack (and not the Wireless Gateway).• The data cable is plugged into the DSL port on the d …

• Goodmans GV101YRH Series (2 pages) Check coverage in your area.Text your postcode, followed by your house number or name to 83331*. Or visit www.freeview.co.uk*e.g. NW9 6NY (Costs no more than a normal text.)The FREEVIEW service is subject to coverage. An aerial upgrade may be required. The FREEVIEW, FREEVIEW+, FREEVIEW+ HD words and logos are trade marks of DTV Services LTD. DTV Services Ltd …

• Hyundai DVBH801 (68 pages)  …

Comments, Questions and Opinions: