Brivis Contour Series Operation & User’s Manual

Text of Brivis Contour Series User Guide:

• Brivis Contour Series, The Origins of your sea breeze. Dear owner, Congratulations on your purchase of a Brivis cooling system. You've chosen wisely. Fresh-Air Cooling creates the perfect, natural environment in every room of your house. That's why many of your fellow Australians will applaud your choice. It's also why Brivis has such a long standing commitment to environmentally friendly and affordable fuels. As a family company, established by my father over 40 years ago, Brivis still adheres to his successful philosophy of providing the best

• Brivis Contour Series, How cool is cool? The degree of cooling available from any type of air conditioning, is dependent on the outside weather conditions. Your Evaporative Cooler works best on hot, dry days. After all, that's when you require the most relief. What to do on sultry or humid days. On days of high humidity, your Evaporative Cooler works best with the Fan on high and the Pump switch turned OFF. You'll also feel more comfortable, because the air moving across the surface of your skin, will increase its natural evaporation. Just like a constant breath of fresh air. Unlike refrigerated systems which constantly recycle frigid, stale

• Start the Cooler Early. On days when high temperatures are expected, start operating your cooler early, to prevent a build up of heat within the house. And if those temperatures bring high winds, ensure that the windows and doors open for ventilation are on the sheltered side of the house. Operating your Contour Cooler. Every Brivis Contour Cooler is controlled by

• Brivis Contour Series, the constant level you have selected, and the pump can be turned ON or OFF as required. Start up. In either mode, when the cooling is first turned ON, and the Networker is set for the Cooler to operate, there will be a delay before the cool air will be delivered from the duct outlets. The unit has pre-programmed function times, to allow time to open the ServoSeal, to fill the Coolers tank with water and to Pre-Wet the filter pads. This process could take up to 8 minutes, before cool air is expected from the duct outlets. Shut dow

• Brivis Contour Series, Seasonal Maintenance. The start and end of season maintenance procedures as set out below, will ensure you obtain the optimum performance and longevity. Start of Season Maintenance. Start of season maintenance and any repair work should be carried out by Brivis or an experienced service technician. Seasonal Maintenance. The start and end of season maintenance procedures as set out below, will ensure you obtain the optimum performance and longevity. Start of Season Maintenance. Start of season maintenance and any repair work should be carried out by Brivis or an experien

• Brivis Contour Series, • Ensure the pump is operating, and visually check the pads externally for even water distribution to the pads. • Check if the ventilation within the targeted cooling area is sufficient. • Selecting the wrong, or insufficient ventilation points, could result in excessive air movement causing draughts, or inadequate air distribution resulting in poor performance. • Check the water supply to the unit is turned ON. • Ensure the water inlet is operating correctly. • Ensure the water system is operating to the minimum and maximum water levels. • Check the fan operates, and that air

• Brivis Contour Series, The Networker Cooling Quick Reference Guide. Page 3 Selecting a Comfort Level. Page 3 Automatic Operation. Page 4 Getting Started in Auto. Page 7 Automatic Pre-Wet. Page 7 On-Screen Information. Page 7 Notes on Zoning. Page 8 Shifting into Manual. Page 10 Using the Timer.

• Brivis Contour Series, Selecting a Comfort Level. The key benefit of ducted evaporative cooling is that it is a natural cooling system. It's based on fresh air, not reprocessed air. Its goal is to provide a cooler, more comfortable environment inside the house. That's why the Networker operates to a Set Comfort Level for cooling, not a specific temperature. This level can be set to provide a Normal Level (average) of cooling. Or, if you don't want to be quite that cool, it can be set on a higher level or Warmer Level than that. Or, if the normal level isn't cool enough, it can be set at an even Cooler Level, if necessary. Every location around Australia

• Brivis Contour Series, The Column Display [17a] in the middle of the screen indicates the cooler's Set Comfort Level Now use the ROTARY DIAL [2] to set the Comfort Level you desire. The Networker then constantly calculates the comfort level in the room and, if it is above the Set Comfort Level, the Networker will automatically switch on the" Pump" and operate the "Fan" at the correct speed needed to achieve this target level. The next time you return to Auto Operation, these steps will not be necessary because the Networker automatically returns to your previous settings. Automatic Pre-Wet. In order to cool effectively

• Brivis Contour Series, After Pre-Wet, the word "Pump" [9a] will disappear. Notes on Zoning. Some systems may include multiple coolers with each operating in a different zone. These will have been set up and explained by the installer of the system and can be operated by either, or both, of the lower two control keys [6 & 7]. Shifting into Manual. In Automatic, the Networker operates the cooler to maintain the pre-set comfort level. But, in Manual Operation, you control the FAN, its speed, and the PUMP yourself. The first time you go into "Manual", just follow these steps. With the Networker ON, and Cooler selected, press the AUTO control key [3] to select &quo

• Using the Timer. If you wish to drift off to sleep under a gentle breeze, you can. Whenever the Cooler is ON, you can pre-set a time for the Timer to turn the Cooler OFF. Or, if you are out for the day and you want the Cooler to come ON and pre-cool the house before you return, you can. Whenever the Cooler is turned OFF, you can select a time for the Timer to turn it ON automatically. Just

• Brivis Contour Series, Again, use the ROTARY DIAL [2] to set the "Off Time". Once you a have selected your "On Time" or "Off Time" then press the PROG key [5] again to save your setting. The small Indicator Panel will change and the Title will remain beside the "On Time"/"Off Time" key [8] to show that the Networker is now holding your pre-set ON or OFF time. If you want to check what you've done, just press PROG [5] again and the pre-set time will flash. If you change your mind and want to cancel the setting just press the "On Time"/Off Time" key [8] again. Pressing the ON/OFF button [1] at any time duri

More Instructions:

Brivis Contour Series Installation manual 11-04-2024 32

DOWNLOAD

Related Products and Documents (Freezer):

Comparable Devices:

Similar Resources:

• Samsung DA99-01906A (32 pages) Refrigeratoruser manualimagine the possibilitiesThank you for purchasing a Samsung product.To receive a more complete service, please register your product atwww.samsung.com/registerEnglish …

• Crathco G23-2B (4 pages) 9PUT ON BOWL SEAL AND SHAFT SEAL• Moisten bowl seal (T) with waterand put back on• Check for wear of bell shaped rubber shaft seal (see below ) replace if needed• Lubricate inside of bell shaped shaft seal (X) with food grade lubricant. Put back seal making sure flared side faces the cylinder10PUT ON GEAR RING/AUGER ASSEMBLY• Put gear ring/auger asse …

• Perlick F24NB (8 pages) INSTALLATION AND OPERATION INSTRUCTIONSSINGLE DOOR FREEZERTable of ContentsCabinet Specifications ......................................... 2Installing Uncrating and Inspection ...............................3 Plumbing ........................................................ 3 Electrical ......................................................... 3 Placing …

• Frigidaire FPUH19D7LF (22 pages) TABLE DES MATIÈRESwww.frigidaire.com États-Unis 1-800-944-9044 www.frigidaire.ca Canada 1-800-265-8352Tout sur l’Utilisation et l'entretiende votre CongélateurConsignes de sécurité importantes ..........................2Informations concernant l'électricité ........................3Aperçu des caractéristiques ............. …

• Danby DUF808WE (10 pages) Model • Modèle • ModeloDUF808WEFor service, contact your nearest service depot or call:1-800-26 Danbyto recommend a depot in your area.Pour obtenir le service, consultez votre succursale régionale de serviceou téléphonez:1-800-26 Danbyqui vous recommandera un centre régional.Para sevicio, communíquese con suDepartamento de Servicios más cer-cano o …

• Kenmore 795.6997 (92 pages) ®TOP FREEZER REFRIGERATORCONGELADOR SUPERIOR REFRIGERADORCONGI_LATEUR SUPi_RIEUR REFRIGERATEURModels / Modelos/ ModUles795.6997 ....795.7997****795.6937 ....795.7937****795.6991 ....795.7991"***795.6929****795.7929****mZ_3t"mcnrtlZ_O"13Z<3mcnMFL61920601 Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.comPrinted in Mexico …

Comments, Questions and Opinions: