Burmester 089 Owner's Manual

Text of Burmester 089 User Guide:

• OWNER´S MANUAL TOP LINE CD PLAYER 089 HIGH END MADE IN GERMANY BURMESTER AUDIOSYSTEME GMBH • KOLONNENSTR. 30G • 10829 BERLIN • GERMANY TEL +49/(0)30/78 79 68 – 0 • FAX +49/(0)30/78 79 68 – 68 • E-MAIL: [email protected] • www.burmester.de

• Dear Audiophile, Thank you for choosing this Burmester audio component. We sincerely appreciate your trust in us. You have purchased a unit which excels in musical fidelity and combines uncompromising manufacturing quality with technical innovation and the highes

• Burmester 089, T A B L E O F C O N T E N T S UNPACKING AND SETTING UP 1 FUNCTIONAL OVERVIEW OF CD PLAYER UNIT 2 FRONT PANEL 2 REAR PANEL 3 FIRST STARTUP 4 CONNECTIONS 5 HOOKUP TO AN ANALOG AMPLIFIER 5 HOOKUP TO A DIGITAL AMPLIFIER 5 HOOKUP OF A DIGITAL SOURCE COMPONENT 6 HOOKUP OF AN ANALOG SOURCE COMPONENT 6 ADDITIONAL CONNECTIONS 6 OPERATING CONTROLS 7 THE FUNCTION INDICATORS 8 SYSTEM SETUP 9 OPERATING THE SYSTEM SETUP 9 SHORT DESCRIPTION OF THE MENU ITEMS 10 DESCRIPT

• Burmester 089, 1 UNPACKING AND SETTING UP CAUTION: The CD player 089 is shipped inside a plastic protective cover. Make sure that children do not play with it to avoid the danger of suffocation. Unpacking To avoid damaging the housing, please do not use pointed or sharp tools to open the box. Please make sure that the content of the box is complete. If something is missing or you notice any damage while unpacking, do not hook up the unit. Instead, contact your authorized dealer. Content of boxes The two boxes should contain the following: • 1 box with the CD player 089 • 1 CD clamp

• Burmester 089, 2 FUNCTIONAL OVERVIEW OF CD PLAYER UNIT FRONT PANEL (1) Sliding cover (13) SKIP >>| button for selecting the next (2) INPUT LEDs indicate the selected input tracks (3) SYNC LED indicates a correct data stream input (14) PROGRAM LED illuminates when a music (4) TRACK display indicates the current track program has been selected and saved (5) OPERATING MODE display (15) IR receiver for commands of remote control (6) REPEAT display (16) AUDIO LED shows up sampling of 192kHz (7) TIME display shows elapsed or remaining time (17) STOP button (8) SCAN- an

• Burmester 089, 3 FUNCTIONAL OVERVIEW OF CD PLAYER UNIT REAR PANEL (23) BURLINK interface RS-232 with check LEDs (33) Digital audio output RCA (75 ) (24) BURLINK interface USB with check LEDs (34) Digital audio input TORX (25) MMI slot for future upgrades for optical fiber cables (26) Analog audio input right channel (bal.) (35) Digital audio input RCA (75 ) (27) Analog audio input left channel (bal.) (36) Analog audio output right channel (bal.) (28) AC

• Burmester 089, 4 FIRST STARTUP CAUTION: Before connecting the unit, please check if the input voltage data on the rear panel, underneath the AC mains terminal (29) is equal to the local voltage of your wall outlet. Make sure the ground lead in your power outlet is working correctly. A missing or faulty ground is extremely dangerous! In case of doubt contact a licensed electrician. or your power supply company. • Connect your preferred in- and outputs of the CD player with your HiFi system. Please refer to

• Burmester 089, 5 CONNECTIONS All connection terminals are located on the rear panel. While connecting the CD player, all components of the music system must be turned off. CAUTION: Before connecting the unit, please check if the input voltage of the 089 is equal to the local voltage of your wall outlet. Make sure the ground lead in your power outlet is working correctly. A missing or faulty ground is extremely dangerous! In case of doubt contact a licensed electrician. AC mains terminal Make sure the AC mains switch (28) is set to OFF. Connect the appliance connector of the power cord to

• 6 CONNECTING A DIGITAL SOURCE COMPONENT Digital inputs The CD player 089 offers two DIGITAL INPUTS for the connection of external digital source components such as DAT recorders or CD players: The terminal TORX (34) receives optical signals and requires an optical cable with plugs according to TOSHIBA norm. The terminal RCA (35) receives electronic signals and requires

• Burmester 089, 7 OPERATING CONTROLS With the exception of the AC mains switch, which is located on the rear panel, all operating controls are located on the front panel of the CD player. AC mains switch The AC mains switch (28) which turns AC power to the unit on and off is located on the rear panel of the power supply unit above the AC mains terminal. By switching to the ON position the standby transformer is powered up. POWER switch The POWER switch (21) switches the CD player on and off, provided the AC mains switch is in the ON position. With the POWER switch (21) set to “OFF“ all functions of the CD player are powered down. Flippin

• Burmester 089, 8 THE FUNCTION INDICATORS POWER LED The POWER LED (22) of the CD player lights up orange, if the CD player is in standby mode. The LED lights up red, when the unit is switched on. AUDIO LED The AUDIO LED (16) illuminates, when the internal sample rate of the D/A converter is switched to 192kHz. PROGRAM LED The PROGRAM LED (14) illuminates, when the PROGRAM function has been activated. (see chapter “ HOW TO PROGRAM A FAVORI

• Burmester 089, 9 SYSTEM SETUP The SYSTEM SETUP menu of the CD player 089 allows the easy programming of certain basic settings. All settings of the SYSTEM SETUP will be saved automatically after leaving the SETUP and remain after switching off the unit. The SYSTEM SETUP can be operated only with the button MENU and the navigation buttons , , , of the remote control. If the unit is switched off inadvertently while the SYSTEM SETUP menu is active, all settings that were made will be saved. OPERATING THE SYSTEM SETUP Activating SETUP Press the button MENU to activate the SYSTEM SETUP. The alphanumer

• Burmester 089, 10 SHORT DESCRIPTION OF THE MENU ITEMS MENU ITEM SHAORT DESCRIPTION DEFAULT AUTO The CD player automatically starts playback of the CD after switching on (ON) or not (OFF) OFF OUTPUT You can choose between defined (FIX) or adjustable (VARIABLE) output level of the analog outputs. VARIABLE SERIAL-NR. After switching on it shows the type and the serial number of the unit, when item is set to ON OFF DISPLAY You can select the quantity of information shown in the alphanumeric display. MINIMUM RC-INPUT Setting YES enables the buttons STATION+/- of the remote control to change the

• 11 DESCRIPTION OF THE MENU ITEMS OF THE SYSTEM SETUP AUTO You can choose, if the CD player should start playback directly after switching on the unit. OFF The unit reads only the table of content and remains in STOP mode. ON The unit begins playing the CD directly after switching on. OUTPUT You can choose between defined (FIX) or adjustable (VARIABLE) ou

• Burmester 089, 12 REMOTE CONTROL POWER The POWER button switches the CD player on or off, provided the Mains switch is set to ON and the power switch on the front panel is set to STBY. DIM Pressing the DIM button varies the brightness of the alphanumeric display in four steps between “max. brightness” to “off”. If brightness is selected to “off”, the display will light up only when any controls are used to change settings. After a few seconds it automatically switches off again. AUDIO With the AUDIO button you can choose the rate of the in

• Burmester 089, 13 SEARCH >> Briefly pressing the button SEARCH >> alternately activates the slow or the fast forward mode. To switch back to normal playback mode, press the button PLAY/PAUSE. SEARCH << Briefly pressing the button SEARCH << alternately activates the slow or the fast backward mode. To switch back to normal playback mode, press the button PLAY/PAUSE. VOLUME By pressing either the VOLUME + or VOLUME – buttons you can adjust the sound level. The level is shown in the VOLUME display (7). Pressing the corresponding button on your remote control lowers or rises the output volume. Rememb

• Burmester 089, 14 Activating the programming mode Arranging a program Saving a program Playback of the program Selecting a defined program space Programming a track Deleting a program To start the program function, press the PROGR. button of the remote contr ol. The alphanumeric display will show PROGRAM shortly and then the programming mode starts. The display shows now PRG: 01 TCK: 00 whereby PRG stands for program space, TCK stands for the track which should be programmed on this program space. The selection of a track will be do

• Burmester 089, 15 BURLINK CONNECTIONS Connecting to the BURLINK interface can be either done with the 9 pin D-SUB connector (RS-232) or with the USB connector. RS-232 configuration: 9600Baud, 8bit, parity: none, 1 stop bit, no hardware handshake A USB device driver needs to be installed when using the USB connector. System requirements for using the USB software are either WINDOWS 2000 or WINDOWS XP operating system. COMMANDS Following are listed the possible commands to control the CD player 089. All commands needs to be sent in capital letters finished with a “carriage return“ \r . POWON\r switches the unit on POWOFF

• Burmester 089, 16 GENERAL INSTRUCTIONS Please read these instructions and the owner´ s manual carefully and keep these instructions safely with the owner´ s manual of your component. If you have any questions, we ask you to contact your dealer. Operating temperature An operating temperature that is too high or too low may cause malfunctioning. We therefore recommend letting the unit sit for a while after unpacking and before connecting and operating it. Setting up When choosing a place for your equipment please observe the following: - Avoid direct sunlight. -

• Burmester 089, 17 ! Lightening strikes During the summer months, malfunctions often occur due to voltage spikes in the power lines after lightning strikes. Completely unplugging the power cord offers the only effective protection. Merely switching the unit off does not suffice since voltage spikes are able to arc over separated contacts. Fuses The fuses are located inside the unit and should be changed only by a qualified technician. Warranty We offer warranty for this unit provided the unit has been hooked-up and operated correctly, is mechanically undamaged. Opening the unit, modifying it or dismantling outlets wi

• Burmester 089, 18 TECHNICAL SPECIFICATIONS Dimensions (W x H x D) 482 x 112 x 331 mm (17.7 x 6.3 x 13.4 inches) with opened sliding cover 482 x 112 x 376 mm (17.7 x 6.3 x 14.8 inches) Weight app. 11,5kg (app. 25.3 lbs) Mains voltage and fuses for 200V - 240V 50/60Hz 1 x slow 50mA E, 1 x slow 1A E for 100V - 127V 50/60Hz 1 x slow 50mA E, 2 x slow 2.5A E Power consumption ON 28,3 W STBY (Mains switch ON) 2,4 W PLEASE NOTE: The dimensions do not include the length of binding posts and the space needed for

Related Products and Documents (CD Player):

Comparable Devices:

Similar Resources:

• Panasonic SLSX430 - PORTABLE CD PLAYER (100 pages) EspañolEnglish DeutschItalianoFrançaisPortuguêsNederlandsDanskPyccknØrÎskÇeskyPolskiSvenskaEspañolDeutschItalianoFrançaisPortuguêsNederlandsDanskSL-SX430SL-SX429CSL-SX428EG RQT7186-1ENiniejsza instrukcja zostaìa opracowana na podstawie oryginalnejpublikacji firmy MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD.Lector portátil de discos compactosInstruccio …

• NAD M55 (38 pages) M55Digital Disc PlayerENGLISHFRANÇAISDEUTSCHNEDERLANDSESPAÑOLITALIANOPORTUGUÊSSVENSKAOwner’s ManualManuel d’InstallationBedienungsanleitungGebruikershandleiding ®M55 08.qxd 8/11/2006 9:06 AM Page 1 …

• Sony CFD-S07CP (42 pages) SERVICE MANUALSony CorporationAudio&Video Business GroupPublished by Sony Techno Create CorporationCFD-S07CPSPECIFICATIONSCD RADIO CASSETTE-CORDER9-889-823-012010D04-1© 2010.04Canadian ModelAEP ModelE ModelAustralian ModelVer. 1.0 2010.04CD player sectionSystem Compact disc digital audio systemLaser diode properties Emission duration: Continuous Las …

• Memorex MVD4543OM (56 pages) Before operating this product,please read these instructions completely.User’s GuideDVD/CD/VCD/MP3/PHOTO CDPlayer and Video Cassette RecorderMVD4543 …

• Philips EXP2461 Expanium (2 pages) Portable CD / MP3-CD PlayerEXP2461Enjoy skip-free MP3 musicGet into your groove with the eXp2461 MP3-CD players and enjoy 10 hours of skip-free music on one MP3-CD. A classic favourite, the eXp2461 comes with a dual color display and is a great choice for easy and hassle-free music enjoyment oEnhanced bass performance• Dynamic Bass Boost delivers deeper, m …

• Sony SCD-C2000ESB - 5 Disc Sa-cd/cd Changer (2 pages) SCD-C2000ES/BES SACD Key Features5 Disc SA-CD/CD Changer Time Alignment Function for Optimum SA-CD PlaybackMulti-Channel Audio Output Dual Power SuppliesSolid Aluminium front plate constructionOptical & Coaxial Digital Output (CD only)Multi-Channel Management System Dual Laser Assembly Optimized for SA-CD/CD PlaybackSuper Audio Digital to Analog Conv …

Comments, Questions and Opinions: