LiteOn VPOC VP-3103-111U Startup Manual

Text of LiteOn VPOC VP-3103-111U User Guide:

• STARTUP GUIDE VP-3103-111U 10kW VPOC™ Power System VP-3103-111U-ST-01 Page 2 of 8 October 2015 ©2015 Copyright Lite-On Technology Corporation ALL RIGHTS RESERVED. Lite-On is a trademark of Lite-On Technology Corporation, registered in the United States and other countries. This document may contain inaccuracies and typographical errors. Lite-On cannot be held responsible for a

• LiteOn VPOC VP-3103-111U, STARTUP GUIDE VP-3103-111U 10kW VPOC™ Power System VP-3103-111U-ST-01 Page 3 of 8 October 2015 Introduction Virtual Power On Call (VPOC™) is a highly-efficient backup power solution that uses a fraction of the space of a conventional Uninterruptable Power System (UPS). The 10kW VPOC™ module, along with two Lithium Ion (Li-ion) battery modules, slides into the 1U VPOC™ Shelf. VPOC™ automatically manages transitions between normal (AC) operation and battery mode (DC) to keep IT equipment safe during power interruptions. An external VRLA battery solution may be substituted for

• LiteOn VPOC VP-3103-111U, STARTUP GUIDE VP-3103-111U 10kW VPOC™ Power System VP-3103-111U-ST-01 Page 4 of 8 October 2015 Startup Checklist Before activating input power to the VPOC™ Power System, verify that all conditions in the Initial Startup Checklist table below have been met. At this point, the following components should be properly installed: • VPOC™ Power shelf into its rack • All power switches and breakers on the VPOC™ Power shelf, Power Distribution Module (PDM), and VRLA battery shelf are in the OFF position • The maintenance bypass switch on the

• LiteOn VPOC VP-3103-111U, STARTUP GUIDE VP-3103-111U 10kW VPOC™ Power System VP-3103-111U-ST-01 Page 5 of 8 October 2015 Initial Power Activation To activate power to the VPOC™ Power System the first time: 1. Turn on the circuit breaker that supplies power to the VPOC™ Power System. All lights on the VPOC™ front panel illuminate for a few seconds and the VPOC™ Power Module fans come on at full speed. 2. Wait for the VPOC™ Power System to fully start up (approximately 10 to 15 seconds). After the system has completed start up, verify that the following green lights on the front panel are illuminated: • AC Output Indicator (see 1 below) • AC Input Indicator (see 2 belo

• LiteOn VPOC VP-3103-111U, STARTUP GUIDE VP-3103-111U 10kW VPOC™ Power System VP-3103-111U-ST-01 Page 6 of 8 October 2015 3. By observing the VPOC™ Power Shelf front panel, verify that its batteries are charged to 20% or more (20% light is solid). If they are not at that level, wait until they reach a charge of 20% or more before proceeding. 4. Turn off the main breaker for the VPOC™ Power System to disconnect it from AC power. The VPOC™ Power System switches to DC mode, the amber battery light illuminates, and the AC Input Indicator turns off. 5. Using a DMM, measure the line-to-line DC voltage of one of the PDU outlets that is connected to the VPOC

• LiteOn VPOC VP-3103-111U, STARTUP GUIDE VP-3103-111U 10kW VPOC™ Power System VP-3103-111U-ST-01 Page 7 of 8 October 2015 Related Documentation For information about the VPOC™ Shelf, refer to the Lite-On VPOC™ Shelf Datasheet. For information about the VPOC™ Power Module, refer to the Lite-On VPOC™ Module Datasheet. For information about the VPOC™ PDU, refer to the Lite-On VPOC™ PDU Datasheet. For information about the VPOC™ Li-ion battery, refer to the Lite-On VPOC™ Li-ion Battery Datasheet. For information about the VPOC™ VRLA battery, refer to the Lite-On VPOC™ VRLA Battery Datasheet. For instructions on installing an

• LiteOn VPOC VP-3103-111U, STARTUP GUIDE VP-3103-111U 10kW VPOC™ Power System Lite-On Power System Solutions USA 3001 Summit Ave, Suite 400, Plano, TX 75074 +1 (469) 331-9838, email: [email protected] www.liteon-pss.com Lite-On Power System Solutions Taiwan No. 90, Chien 1 Rd., Chung Ho Dist, New Taipei City 23585, +886 -2-2226181 ext 5026, email: [email protected] www.liteon-pss.com VP-3103-111U-ST-01 Page 8 of 8 October 2015 Innovative Power Management Solutions for Critical Infrastructure

More Instructions:

LiteOn VPOC VP-3103-111U Operation & user’s manual 08-05-2023 23

DOWNLOAD

Related Products and Documents (UPS):

Comparable Devices:

Similar Resources:

• Tripp Lite SU8000RT3U (7 pages) Tripp Lite1111 West 35th StreetChicago, IL 60609 USATelephone: +(773) 869 1234E-mail: [email protected] #: SU8000RT3USmartOnline 8kVA On-Line Double-Conversion UPS, 6U Rack/Tower, 200-240V NEMA outlets Highlights8kVA / 8000VA / 7200W on-line double-conversion UPS; 0.9 power factor200/208/220/230/240V 50/60Hz output; Economy mode option6U Rack/Tow …

• Toshiba 1400 Series (31 pages) UNINTERRUPTIBLE POWER SYSTEMSINGLE PHASE - .6/.8/1.0/1.2/1.5/2 KVASINGLE PHASE - .5/.75/1.0/1.5 KVA PLUSFebruary, 1993Part #37725andOPERATION MANUALMANUFACTURED IN THE U.S.A. …

• Toshiba 4400 Series (12 pages) 14400 Series UPS Seismic Kit Installation Instructions – 94016-0014400 Series UPS Seismic Adapter Kit Installation InstructionsDate: October 2015Doc. No.: 94016-001The 4400 Series cabinets can be installed to meet California OSHPD seismic specications using the optional Seismic Kit and the oor anchorages specied below. These instru …

• Toshiba G9000 SERIES (72 pages) UNINTERRUPTIBLE POWER SYSTEM (UPS) G9000 SERIES INSTALLATION AND OPERATION MANUAL 480/480 V 1000kVA Document No.: 91649-0041 Reference: 4GBA0051 Rev. A September. 2014 …

• Minuteman Endeavor ED1000RTXL2U (16 pages) User's ManualEndeavor LCDRTXL UPS SeriesPara Systems, Inc.1455 Lemay Dr.Carrollton, TX 75007Phone: 1-972-446-7363Fax: 1-972-446-9011Internet: minutemanups.comUPS Sizing: sizemyups.comPN - 34000516 R2 …

• Eaton 9PX 1:1 (13 pages) Eaton® setUPS Firmware upgrade procedure Eaton®setUPS_9PX_1-1_1to3k_firmware_upgrade_rev_02 Page 1/13 UPS model : 9PX 1:1 1 to 3kVA Date : 02/09/2016 …

Comments, Questions and Opinions: