Casio DT-300M60E Operation & User’s Manual

Text of Casio DT-300M60E User Guide:

• Casio DT-300M60E, E-26 Power switch is on System operation LED Communicating LED Power LED Power supply terminal 4 Turn on the power switch. The power indicator LED lights red. 5 Place the infrared interface port on the Handheld Terminal and the infrared interface port on the Bridge Satellite Cradle so that they are in direct contact. The power indicator LED on the Bridge Satellite Cradle lights green. · If the system is operating correctly, and it goes into transmission status, then the system operation LED flashes green. Important! • The infrared communication function uses highly sensitive transmission elements. For optimum communication performance, avoid using any devices that emit rad

• Casio DT-300M60E, E-17 1 5 2 3 7 8 6 9 4 Keys and Their Functions The Handheld Terminal has 18 stroke keys and one read key. Stroke Keys and Their Functions. 1 Read key Press this key to read a bar code. 2 Clear key Press this key to cancel input. 3 Backspace key Press this key to erase the character to the left of the cursor. This key can be set to do other functions, except for reading bar codes. 4 10-key pad Press these keys to enter numbers 0 to 9 in the number input mode. 5 Power key Press this key to turn the power on and off. 6 Enter key Press this key to register input. 7 Brightness control keys These keys can be set to do other functions, except for reading bar codes. The de

• Casio DT-300M60E, E-7 Caution! ■ Optional Bridge Satellite Cradle ● Keep the power cord away from stoves and other sources of extreme heat. Heat can melt the insulation of the power cord and create the danger of fire and electrical shock. ● Never pull on the power cord when unplugging it. Doing so can damage the cord and create the danger of personal injury, fire and electrical shock. Always hold onto the plug when unplugging it from the wall outlet. ● Never touch the plug while your hands are wet. Doing so can create th

• Casio DT-300M60E, E-4 Warning! ■ Disassembly and Modification ● Never try to disassemble or modify the unit in any way. High voltage inside creates the danger of electrical shock. ■ Interior Parts and Components ● Never touch interior high-voltage parts or components. Doing so creates the danger of electrical shock. ■ Abnormal Conditions ● Should the unit become hot or start to emit smoke or a strange odor, immediately turn off the power and contact your original dealer or an authorized CASIO service provider. Continued use creates the danger of fire and electrical shock. ■ Foreign Objects ● Sh

• Casio DT-300M60E, E-6 Caution! ■ Handling Alkaline Batteries ● Store batteries someplace out of direct sunlight where the temperature and humidity are not high. Not doing so may cause the batteries to leak fluid, overheat or explode. Also, it may cause the life and performance of the batteries to decline. ● Follow the regulations of the local government when disposing of these batteries. ■ Make back-up copies of all important data ● Note that CASIO Computer Co., Ltd. shall not be liable to you or any third party for any damages or loss caused by deletion or corruption of data due to use of this, malfunction or repair of this unit or its peripherals, or due to batteries going

• Casio DT-300M60E, E-24 1 USB interface Used to connect the Handheld Terminal to a personal computer and transfer data (upload and download) to or from the Handheld Terminal. You need to install a dedicated driver on the personal computer before connecting it to the PC. 2 RS-232C interface Used to connect the Handheld Terminal to a personal computer and transfer data (upload and download) to or from the Handheld Terminal. You need to install a dedicated driver on the personal computer before connecting it to the PC. 3 RS-422 interface Used to connect Bridge Satellite Cradles. 4 Handheld Terminal detection switch This switch detects if the Handheld Terminal is correctly mounted. 5 Infrared interface p

• Casio DT-300M60E, E-25 Power Hook Up and Connections Use the AC adaptor (DT-9020ADP) for the Bridge Satellite Cradle sold separately for the Bridge Satellite Cradle power supply. Be sure to hook up the AC adaptor and the Bridge Satellite Cradle before transmitting data to or from the Handheld Terminal. The Handheld Terminal draws its power directly from the Bridge Satellite Cradle. 1 Be sure the Bridge Satellite Cradle power is turned off before plugging the AC adaptor into the AC adaptor jack on the side of the B

• E-15 About the LCD Screen The LCD screen of the Handheld Terminal shows program settings, operational procedures, and calculation results and other information. • Display Area 64 dots (V) x 112 dots (H) • Display Characters 12-dot, 16-dot, and 20-dot font modes Each font mode allows mixing of the following three fonts: • Text Fonts Alphanumerics, kana, symbols, JIS No. 1 and No. 2 equi

• Casio DT-300M60E, E-21 Specifications 1. General CPU: 32-bit RISC Type Memory: RAM : 2 MB (User area 1.3 MB) FROM: 8 MB (User area 5.9 MB) 2. Display Type: STN LCD with phase correction film Resolution: 112 x 64 dots Display contrast: Adjustable through key operation Backlight: LED backlight 3. Laser Scanner Readable Codes: JAN, EAN, UPC, NW-7, CODE39, ITF, CODE93, CODE128 (EAN128), MSI, Industrial 2 of 5, IATA Reading Distance: Approximately 4 to 30 cm 4. Input Stroke Keys: 18 Read Key: 1 5. Infrared Communications Interface: Infrared (contact-less) Standard: Conforms to IrDA Ver. 1.1 Control Protocol: Half-duplex Synchronization: Asynchronous Speed: 9,600 bps, 19,200 bps,

• Casio DT-300M60E, E-11 System Diagram Options Bridge Satellite Cradle DT-364IO Bridge Satellite Cradle AC Adaptor DT-9020ADP DT-300M60E Bridge Satellite Cradle Cables RS-232C Cable DT-887AX/AXA Bridge Satellite Cradle PC Connection Cable 9 pin Socket RS-422 Cable DT-888RSC Bridge Satellite Cradle Chain Connection USB Cable DT-380USB Bridge Satellite Cradle PC Connection Cablel

• E-14 Replacing the Main Batteries (AA Alkaline Batteries) Important! • Note the polarity (orientation of the and the ) of the AA alkaline batteries when installing them. • Be sure to turn off the power before removing the batteries. • Remove the batteries if you are not going to use the Handheld Terminal for an extended period of time. Loading the Ma

• Casio DT-300M60E, E-27 Connecting Multiple Bridge Satellite Cradles Use the modular cable for the connections. You can daisy chain multiple Bridge Satellite Cradles by connecting the C-OUT port of the first unit that is the nearest to the host computer to the C-IN port of the next unit that is sitting to the first unit with DT-888RSC cable (Daisy chain connection cable) as shown in the figure below. Important! • You can use optional daisy chain connection cables (DT-888RSC) to link up to eight Bridge Satellite Cradles. RS232C cable or USB cable To host computer 6-6 pin Modular cable (DT-888RSC)

• Casio DT-300M60E, E-13 Battery Replacement Power Supply Operating the Handheld Terminal requires two AA (LR6) alkaline batteries. Replace the AA (LR6) alkaline batteries as soon as the battery display on the LCD screen shows that the battery is empty ( ). [Warning] ■ Make a Backup of Important Data • The Handheld Terminal is equipped with an internal backup rechargeable battery. This battery is used as a backup power supply and cannot be removed. If the main batteries are removed while the backup battery is not charged, will cause data to be

• Casio DT-300M60E, E-23 Using the Bridge Satellite Cradle <Top> <Front> <Bottom> <Right side> 6 12 7 8 3 2 1 11 10 9 5 4 You can transfer data (upload and download) between the Handheld Terminal and a personal computer by connecting the Bridge Satellite Cradle (DT-364IO). Use an RS-232C cable (DT-887AX/AXA) or a USB cable (DT-380USB) to connect the Bridge Satellite Cradle to the personal computer. General Guide Cord Clip Accessory

• Casio DT-300M60E, E-28 DIP Switch Settings The DIP switches are located on the bottom of the Bridge Satellite Cradle. The DIP switches can be set to on or off. Turn off the power before setting the DIP switches. Important! • Making any other settings not described above, which are for inspection and other special modes, cause the Bridge Satellite Cradle not to operate correctly. 12345678  Content 6 RS-232C Off USB On Not used (Set to off) Not used (Set to off) Host Computer Connection Interface Content 5 Bridge Satellite Cradle interconnection Off Not linked/terminator On Terminator Unit in Linked Chain Content 1 2 115, 200 bps On Off Communicat

• Casio DT-300M60E, E-5 Warning! ■ Optional Bridge Satellite Cradle ● Power the Bridge Satellite Cradle only with a power outlet whose voltage matches that marked on the Bridge Satellite Cradle. Do not plug the Bridge Satellite Cradle into an extension shared by other appliances. Doing so creates the danger of fire and electrical shock. ● Avoid conditions that can cause damage or breaks in the power cord. Do not place heavy objects on the power cord. Keep it away from sources of heat. Any of these conditions can damage the power cord, creating the danger of fire and electrical shock. ● Never modify, sharply bend, twist, or pull on

• E-12 7 3 1 2 4 5 1 6 8 11 9 10 12 13 <Front> <Top> <Right side> <Back> <Bottom> 7 General Guide 1 Reader port Emits a laser that reads bar codes 2 Read indicator LED Indicates the status of the read operation: green for a successful read, red for an unsuccessful read. * 3 LCD screen Displays information about the programs being run. 4

• Casio DT-300M60E, E-3 Danger! ■ Handling Alkaline Batteries ● Should fluid from the battery accidentally get into your eyes, there is a threat of loss of eyesight, do not rub them. Immediately rinse your eyes with clean tap water and then consult a physician immediately. Warning! ■ Handling Alkaline Batteries ● Do not put the battery in a fire, expose it to heat, dismantle or modify it. If the insulation or safety valve is damaged, the battery may leak fluid, overheat or explode. ● Do not insert the battery with the poles

• E-16 Use the wrist strap to protect the Handheld Terminal from being accidentally dropped while you are carrying it. To Attach the wrist strap Attach the wrist strap as shown below. 1 Pass the thin end of the wrist strap through the metal hand strap mount on the bottom side of the Handheld Terminal. 2 Double the strap back through its own loop, and pull it tight.

• Casio DT-300M60E, E-19 Scanning Bar Codes Hold the Handheld Terminal close to small bar codes. Hold the Handheld Terminal far away from large bar codes. Warning! ■ Do not stare into the laser beam ● The Handheld Terminal uses a laser beam to scan bar codes. Do not look directly into the laser beam, or allow it to shine into your eyes under any circumstances. About Warning Label • This class 2 laser product warning label conforms with IEC 60825. • The class 2 laser emission is only exposed momentarily, but under no circumstances should you look directly into the laser beam. • Operations not mentioned in this guide are dang

• Casio DT-300M60E, E-18 Performing Bar Code Read Operation 1 Turn the power on, and then position the reader port about 4 cm or more from the bar code and press the read key. 2 The reader port emits a laser to read the bar code. The read indicator lights green when the read is successful. Important! • If you have problems with the read operation, change the angle between the bar code and the Handheld Terminal, or move it closer and then try again. • If the bar code is larger than the diameter of the Handheld Terminal’s reader port, try moving the Handheld Terminal a bit farther away from the bar code. • The Handheld Terminal cann

• Casio DT-300M60E, E-10 Important Carefully read the following points to get the best performance and long life from your Handheld Terminal. Handling Precautions • Use only your finger or a blunt object to operate the stroke keys. Use of a sharp pointed object can damage stroke keys and cause shorting of internal circuitry. • Use a soft dry cloth when cleaning the Handheld Terminal. Do not wipe it with a wet cloth. Do not use benzine, thinner, or other volatile chemicals, which can result in deformation of the materials used in the keys and case. • Do not lay the Handheld Terminal down with its key

• Casio DT-300M60E, E-20 Communication Between Handheld Terminals You can use the infrared interface port, located on the bottom of the Handheld Terminal, to transfer applications or data to another Handheld Terminal. Set the communication format for two Handheld Terminals as shown below. Make sure that the infrared interface ports on both the units do not shift. Communication is possible if the Handheld Terminals are in direct contact or from up to 20 cm. Data Communication

• Casio DT-300M60E, E-9 Unpacking The following items are included in the package with the product. If for some reason anything is damaged or missing, please contact the store where you purchased the product. • Handheld Terminal DT-300M60E • Wrist Strap Main Batteries (Two AA Alkaline Batteries) • User’s Guide (This book)

Related Products and Documents (Barcode Reader):

Comparable Devices:

Similar Resources:

• KoamTac KDC30 (9 pages) ©2020 KOAMTAC, Inc. QG_KDC30_20201014 KDC30 Quick Guide 116 Village Blvd, Suite 305, Princeton, NJ 08540 USA T: + 1-609-256-4700 F: +1-609-228-4373 [email protected] www.koamtac.com …

• Unitech MS925 (177 pages) ※※ 注意 ※※ 本書に記載されている設定バーコードはM925 のみで使用できる設定です。下記のリストに記された機種以外では使用できません。該当機器以外に適用した場合は、例え同じ系統の機器でも操作不能となる場合があります。 対象機器リスト モデル名 …

• Code CR3 (68 pages) C002332_12_CR3 User Manual 1Save SettingsManual Version 12This version of the manual released with fi rmware version 4058. Release Date: 12/15/08User ManualCode Reader 3.0™C002332_12_CR3_User Manual …

• Toshiba B-SV4D (43 pages) PRINTED IN JAPAN TOSHIBA Thermal Printer B-SV4D SERIES Document No. EO18-33013 Original May, 2003 (Revised ) Printer ManualThis manual includes the contents of the Product Descrption, Maintenance Manual, and Circuit Description. …

• Zebra ZD420 (2 pages) ++www.zebra.com/zd420c-info— http://www.zebra.com/contact— https://km.zebra.com— https://www.zebra.com/suppliesMedia Out Status + Media lights RedSin papelLuces de estado + papel se encienden en color rojoFin de papierVoyant rouge d'état et de supportClose the printerCierre la impresoraRefermez l'imprimanteOpen and place roll on holderAbra …

• Baracoda 2 (2 pages) Traceabilitywww.baracoda.comSmall & convenient to handle, 42 g only Unique wireless contact scanner on the marketOut of the box ready Interfaces with the majority of PDAs/Mobile phonesSave battery consumption of your PDA/mobile phone vs. SD or CompactFlash solutionsCan be used as a stylus on tactile screensBaracoda Pencil 2Bluetooth Contact Barcode Scann …

Comments, Questions and Opinions: