Siemens Simatic ET 200S Manual 

Text of Siemens Simatic ET 200S User Guide:

• Siemens Simatic ET 200S, SIMATIC ET 200S distributed I/O Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) _ _____________ _ _____________ _ _____________ Preface Properties 1 Parameters 2 Diagnostics 3 SIMATIC ET 200S distributed I/O Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) Manual 04/2007 A5E01077255-01

• Siemens Simatic ET 200S, Safety Guidelines Safety Guidelines This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. WARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION with a safety alert symbol, indicates that minor per

• Siemens Simatic ET 200S, Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) Manual, 04/2007, A5E01077255-01 3 Preface Preface Purpose of the manual This manual supplements the ET 200S Distributed I/O System Operating Instructions. General functions for the ET 200S are described in the ET 200S Distributed I/O System Operating Instructions. The information in this document along with the operating instructions enables you to commission the ET 200S. Basic knowledge requirements To understand these operating instructions you should have general knowledge of automation engineering. Sco

• Siemens Simatic ET 200S, Preface Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) 4 Manual, 04/2007, A5E01077255-01 Training center We offer courses to help you get started with the ET 200S and the SIMATIC S7 automation system. Please contact your regional training center or the central training center in D - 90327, Nuremberg, Germany. Phone: +49 (911) 895-3200. http://www.siemens.com/sitrain Technical Support You can reach technical support for all A&D projects ● using the support request web form: http://www.sieme

• Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) Manual, 04/2007, A5E01077255-01 5 Table of contents Preface ...................................................................................................................................................... 3 1 Properties ............................................................

• Siemens Simatic ET 200S, Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) Manual, 04/2007, A5E01077255-01 7 Properties 1 1.1 Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) Properties ● Digital electronic module with two outputs ● Output current 2 A per output ● Rated load voltage 24 VDC ● Diagnostics: Wire break ● Diagnostics: Short circuit ● Short-circuit protection ● Suitable for solenoid valves, DC contactors, and indicator lights ● Supports isochronous operation ● Extended temperature range from 0 to 55 °C with vertical installation Peculiarity When you connect the 24 VDC rated load voltage to the power module by means of a

• Siemens Simatic ET 200S, Properties 1.1 Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) 8 Manual, 04/2007, A5E01077255-01 Usable terminal modules Usable terminal modules for 2DO 24 VDC/2 A HF (6ES7132-4BB31-0AA0) TM-E15C26-A1 (6ES7193-4CA50- 0AA0) TM-E15C24-A1 (6ES7193-4CA30- 0AA0) TM-E15C24-01 (6ES7193-4CB30- 0AA0) TM-E15C23-01 (6ES7193-4CB10- 0AA0) Spring terminal TM-E15S26-A1 (6ES7193-4CA40- 0AA0) TM-E15S24-A1 (6ES7193-4CA20- 0AA0) TM-E15S24-01 (6ES7193-4CB20- 0AA0) TM-E15S23-01

• Siemens Simatic ET 200S, Properties 1.1 Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) Manual, 04/2007, A5E01077255-01 9 Block diagram       / 0 3 3 (76 EDFNSODQH EXVFLUFXLW %DFNSODQHEXV 5HYHUVHSRODULW\ SURWHFWLRQDQGLQWHUQDO SRZHUVXSSO\ Figure 1-1 Block diagram of the 2DO 24 VDC/2 A HF 2DO 24 VDC/2 A HF analog Technical data (6ES7132-4BB31-0AB0) Dimensions and weight Width (mm) 15 Weight Approx. 40 g Module-specific data Supports isochronous operation Yes Number of ou

• Properties 1.1 Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) 10 Manual, 04/2007, A5E01077255-01 Voltages, currents, potentials Rated load voltage L+ (from the power module) 24 VDC • Polarity reversal Yes 1 Total current of the outputs (per module) 4 A Electrical isolation • Between th

• Siemens Simatic ET 200S, Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) Manual, 04/2007, A5E01077255-01 11 Parameters 2 2.1 Parameters This table shows the parameters for digital output modules: Table 2-1 Parameters for digital output modules 2DO 24 VDC/2 A HF Range of values Default setting Applicability Response to CPU/master STOP • Substitute a value • Keep last value Substitute a value Module Substitute value 1 • "0" • "1" "0" Channel D

• Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) Manual, 04/2007, A5E01077255-01 13 Diagnostics 3 3.1 Diagnostics using LED display LED display 1 2 6)  ① Batch error (red) ② Status display for output status (green) Status and error displays Event (LEDs) SF 1 5 Cause Remedy On No parameter assignment o

• Siemens Simatic ET 200S, Diagnostics 3.2 Error types Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) 14 Manual, 04/2007, A5E01077255-01 3.2 Error types Digital electronic module error types Table 3-1 Error types Error type Meaning Remedy 1 D 00001: Short circuit Short circuit on final controlling element supply after M. 6 D 00110: Open circuit Line to the final controlling element interrupted. Correct the process wiring.

• Siemens Simatic ET 200S, Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0) Manual, 04/2007, A5E01077255-01 15 Index B Basic knowledge requirements, 3 D Digital electronic module 2DO 24 VDC/2 A HF Block diagram, 9 Properties, 7 Technical data, 9 Terminal assignment, 7 Digital electronic modules Error types, 14 Disposal, 3 I Internet Service & Support, 4 L LED display, 13 P Parameters For digital output modules, 11 R Recycling, 3 S Scope Manual, 3 Service & Support, 4 T Technical Support, 4 Training

More Instructions:

	Siemens Simatic ET 200S Manual  11-10-2022 572	DOWNLOAD
	Siemens Simatic ET 200S Operating instructions manual 03-03-2023 320	DOWNLOAD
	Siemens Simatic ET 200S Manual  22-10-2023 53	DOWNLOAD
	Siemens Simatic ET 200S Manual  02-03-2023 564	DOWNLOAD

Related Products and Documents (Switch):

Comparable Devices:

Similar Resources:

• Elko inels RFUS-61/120V (7 pages) RFUS-61Switch unit for outdoor useEN02-57/2016 Rev.6Made in Czech RepublicCharacteristics /• The switching unit with 1 output channel is used for controlling appliances, sockets or lights.• They can be combined with detectors, controllers, iNELS RF Control or system components.• The increased IP65 protection is suited to mounting on the wall or in hars …

• Sigma 2100 Series (13 pages) DIGITAL SWITCHERS 2100 SERIES HIGH PERFORMANCE DIGITAL ROUTING OPERATORS MANUAL Includes Module and Frame Information for: AUDIO VIDEO DAS-2144 DVS-2144 DAS-2188 DVS-2184 DAS-21616 DVS-21164 DVM-1616 DVS-1616 SIGMA ELECTRONICS, INC. 1027 COMMERCIAL AVENUE EAST PETERSBURG, PA 17520-0448 (717) 569-2681 (MAR 04)P.O. Box …

• Dataprobe iBootBar (24 pages) Technical Support Hotline: (201) 934-5111 [email protected]: 201-934-9944 Website: dataprobe.com Scope of this Document: This document covers the installation and operations of Dataprobe’s iBootBar series of remote power control units. The following models are covered in this document: Model Power Feed / Total Capacity Outlets Control …

• Panasonic HYBRID IP-PBX KX-TDA100 (232 pages) Model KX-TDA30/KX-TDA100/KX-TDA200Thank you for purchasing a Panasonic Hybrid IP-PBX.Please read this manual carefully before using this product and save this manual for future use.KX-TDA30: MPR Version 2.2KX-TDA100/KX-TDA200: MPR Version 2.0Hybrid IP-PBXUser Manual …

• Omnitron Systems RuggedNet 10GPoE+/Mi (8 pages) RuggedNet® 10GPoE+/Mi Managed 6 and 10 Port PoE/PoE+ 10Gigabit Ethernet Switch Quick Start Guide38 Tesla, Irvine, CA 92618 USAPhone: (949) 250-6510; Fax: (949) 250-6514General and Copyright NoticeThis publication is protected by U.S. and international copyright laws. All rights reserved. The whole or any part of this publication may not be reproduced …

• Ubiquiti UniFi USW-Industrial (11 pages) 20-11-2019 USW-Industrial Quick Start Guidehttps://dl.ubnt.com/qsg/USW-Industrial/USW-Industrial_EN.html 1/11UniFi Switch Screws (Qty. 6) Screw Anchors (Qty. 6)Power CordPackage ContentsInstallation RequirementsDrill with 6 mm drill bitPhillips screwdriverCat5/6 UTP cable for indoor installations. Plenum-rated cabling for plenumspaces.System RequirementsLinu …

Comments, Questions and Opinions: