Manualios.com

Oce ColorWave 500 Operation Manual

Oce ColorWave 500 Manual Online:

3.25, 1394 votes
Oce ColorWave 500 User Manual
Oce ColorWave 500 User Guide
Oce ColorWave 500 Online Manual

Text of Oce ColorWave 500 User Guide:

  • Oce ColorWave 500, Set the alignment mode Introduction When you want to shift the image on the sheet, you can change the alignment mode. With the alignment mode, you can also optimize the print productivity as you reduce the distance the print carriage has to travel. You can, for instance, align the image to the top right-hand corner of the sheet. You can choose the following alignment settings: Alignment mode [Top left] [Top] [Top right] [Left] [Center] [Right] [Bottom left] [Bottom] [Bottom right] Procedure 1. Open the [Preferences] - [Print job defaults] tab. 2. Click on [Edit] in the [Layout] section or click on the [Alignment] setting. 3. Select the correct value. Select [Top right] wh

  • Oce ColorWave 500, Configure the user session time-out Introduction The user panel returns automatically to the home screen and its default configuration. You can set a time limit for the user session. When to do Define a suitable time-out period that does not interfere with the print productivity. Procedure 1. Open the [Security] - [Configuration] tab. 2. Click on [Edit] in the [User access configuration] section or click on the [User session time-out] setting. 3. Enter a time period . 4. Click [Ok] to confirm, or [Cancel] to reject your entries. Configure the user session time-out 116 Chapter 3 - Define your Workflow with Océ Express WebTools

  • Oce ColorWave 500, change the language....................................... 53 Copy job defaults............................................. 66 description........................................................50 Jobs tab............................................................ 69 load the settings from a file............................ 61 log in ................................................................ 79 Passwords.........................................................80 Print job defaults.............................................

  • Oce ColorWave 500, Make a copy of a dark original (Diazo) Introduction It can be difficult to make a good copy of a Diazo original. Diazo originals have a changing lightness with a 'cloudy' background, which can give an unclear output. The Océ ColorWave 500 has a special [Diazo] preset, that follows the lightness and changing background of the original and copies to an even and high quality output. Before you begin Use the [Diazo] mode for originals that have a changing 'cloudy' background. Dark and light Diazo originals

  • 3. Push the handle [1]. The foot snaps up [2]. 2 1 4. Repeat action 1 till 3 on the right side cover. 5. Move the printer to the preferred location. Be aware of the printer working area. 6. Pull out the left foot [1] until it touches the ground and locks [2]. You should hear a click when it locks into place. 2 1 NOTE If you do not hear a click, place your foot on

  • Name: Occupation: Company: Phone: Address: City: Country: Please return this sheet to: Océ-Technologies B.V. For the attention of ITC User Documentation. P.O. Box 101, 5900 MA Venlo The Netherlands Send your comments by E-mail to: [email protected] For the addresses of local Océ organisations see: http://www.oce.com Reader's comment sheet 320 Chapter 10 - Contact

  • Oce ColorWave 500, Pause, resume, or stop an active job Introduction If you want to pause, resume or stop an active job there are several things you can do. Procedure Pause or resume an active print job Step Action 1.[Pause] Tap on the active job in the dynamic bar of the user panel. The queue opens and [Pause] is visible in the dynamic bar. Tap [Pause] to pause the printer. The [Pause] tile turns into a [Resume] tile. NOTE Note that running prints are finished by the printer, so it might take a moment for the printer to pause. 2.[Resume] Tap [Resume] in the dynamic bar to resume the printer. Stop and delete an active job on the user panel Step Action Resu

  • Oce ColorWave 500, Make a copy of an original with highlighted colors Introduction When you have an original on which colors are accentuated or highlighted, it can be difficult to make a good copy on which the highlighting is still visible. The Océ ColorWave 500 has a special setting [Color highlighting], that highlights the color accents of the original in black and white or color. The copy has the same accents and quality as the colored original. NOTE • When the [Color mode] is set to [Color], color highlighting will make the colors more

  • Oce ColorWave 500, Preset category: [Finishing] Setting Settings values Function [Delivery] [Top Delivery Tray] Location on top of the printer that deposits the sheet face-down. NOTE Not all media types can be delivered to the [Top Delivery Tray]. [Back output] or [Fold]. Select [Back output] to default deliver your output at the back of the printer. Select the folding device when it is configured, and you want to fold your output. [Fold template] When a folding device is configured, you can select the preferred fold template, to fold with predefined s

  • Oce ColorWave 500, Make a copy of a specific area of an original Introduction You can make a copy of a specific area of an original. Use the option [Remove strip] to copy a specific area. NOTE For more information on the cut size settings, see . Procedure 1. Feed the original face up and centered on the original feeding table. 2. Tap the copy tile. A window with a list of presets opens. 3. Tap [Show all settings]. A list with settings opens. 4. Tap [Remove strip] under the [Layout] preset. . The [Top] strip The [Bottom] strip The [Left] strip The [Right] strip 5. Select [Top], [Bottom], [Left], or [Right], and define the values for your specific area. 6. Make your settings and t

  • Oce ColorWave 500, Set a default external location Introduction You can set an external location as the default location. The default location is used when you do not select a specific external location for a job. Procedure 1. Select the [Configuration] - [External locations] tab. 2. Under [External locations] select the external location you want to set as default. 3. Click on the checkbox icon under [Actions]. Set a default external location Chapter 3 - Define your Workflow with Océ Express WebTools 107

  • Oce ColorWave 500, Maintain the Scanner Clean the scanner Introduction Clean the scanner from time to time, to prevent decrease of copy and scan quality. When to do Clean when: • the transparent contact plates are dirty and static • the original support rollers are dirty, and you use transparent originals Procedure 1. Use both hands to push up the left and right scanner open levers to fully open the scanner top cover. A locking mechanism prevents the scanner top cover from closing. IMPORTANT To clean the scanner, use the soft lint-free muslin towels from the scanner cleaning kit. Maintain the Scanner Chapter 5 - Maintain the Printing System 279

  • Oce ColorWave 500, Manage media What is a media profile? Definition A media profile is also called an Océ Media Profile (OMP file). The media profile contains a number of preset values that give the best print result per media type for your system. By default the system already has a number of media profiles available after installation, but due to changes in the production methods for media, the profiles can change over time. Contact your local representative where you can download new profiles. When a new media type becomes available that you want your Océ ColorWave 500 to support, you c

  • Oce ColorWave 500, Create a new template Introduction Create a new template in Océ Express WebTools. NOTE • Depending on the configuration, less or more settings are available. • More or fewer settings will be shown depending on the selections made. • Note that the scan templates on the user panel are ordered alphabetically. When you want to order the templates to your preference, it is advised to use ascending numbers in front of the name (01-02-03 etc.). Procedure 1. Select the [Preferences] - [Fold] tab in Océ Express WebTools for

  • Oce ColorWave 500, Set the spool threshold Introduction When the job memory is full the printer cannot receive new jobs, therefore it is necessary to partly empty the memory. Set the [Spool threshold] setting to define the spool capacity for your jobs. You can choose one of following values: • [Low] Select this value if you have several small print jobs and you want to allow a higher capacity. • [Normal] This is the default setting. Select this value if you have both small and large print jobs. • [High] Select this value when you have more large print jobs, and you want to reduce the risk of having to abort the file transfer due to a full j

  • Oce ColorWave 500, Event message Troubleshoot [PS/PDF resource or language prob- lem; one or more pages not correctly printed] The Postscript or PDF file is complex or corrupt. • Try to print it from an application using the Océ Wide format Printer Driver for Microsoft ® Windows ® . • If the error persists, contact your local Service repre- sentative. [No pages were generated when pro- cessing the document] The file contains non printable pages. • The graphic commands in the file could be missing, the file is corrupt. • The shift setting could be set to a value that causes the image to move completely off the paper. [Job deleted because it is not recov- erable (data is corrupt or incom-

  • Oce ColorWave 500, Troubleshoot the creation of an SMB external location (after an error message) An error message displays to indicate that the creation of the SMB external location failed. According to the error message, perform the verifications proposed in the next table in order to fix the issue. Error message Action to perform The user name or password is incorrect. • Check the remote user name and the password. If the user name and password are correct, check the syn- tax of the external location name: • - For a remote host user: <hostname>\<username> or <IP_address>\<username> • For a domain user: <domainname>\<userna

  • Print a test print When to do Print a test print from a specific roll at the request of the helpdesk. The test print provides information that can help to solve quality problems. Procedure 1. Tap the system menu thumbnail on the user panel. A window opens. 2. In the list on the right, select [Test prints]. A wizard opens. 3. Select the roll you want to print

  • Oce ColorWave 500, Enable or disable scan templates Introduction You can enable or disable scan templates. When you enable the templates they become available on the user panel. Procedure 1. Open the [Preferences] - [Scan] tab. 2. Under Actions, click on the [Edit a template] icon next to the preferred template. The template window opens. 3. Under [File], set the [Display on the user panel] setting to [Yes] or [No]. 4. Click on OK to confirm your entry. Result When you have selected [Yes] the templates are available on the user panel in the Smart Access. NOTE The default scan template is always available in the Smart Access of the user panel, even when it is

  • Color management settings for TIFF and JPEG files (CMYK input) The default settings are emphasized. Input profile Standardization [Color feel] Rendering intent [CAD colors] CMYK • [ Euroscale coated ] • [ Euroscale uncoated ] • [ US Web coated (SWOP) ] • [ US Web uncoated ] • [ ISO Coated v2 300% (ECI) ] • [ ISO Coated v2 (ECI) ] • [ PSO Uncoated ISO12647 (ECI) ]

  • Oce ColorWave 500, Setting Description [Media selection policy] • Select [Automatic next larger] to allow the printer to use a me- dia roll larger than the size of the print, when the exact size is not available. • Select [Automatic exact fit] to only allow the printer to use a media roll that has the exact media size of the print. When the media roll with the exact media size is not available a media re- quest appears. [Cut method] • Select [Standard] to cut the print at a standard media size (DIN, ANSI etc.). • Select [Synchro] to cut the print at the end of the image. • Select [Custom] (numeric) to cut the print at a specific length.

  • [Folding method] Description Example [With binding edge] (DIN- A). Folded package, but the last fold (rear) has additional width. The previous fold could be shorter. Max 230 mm 0 - 30 mm [Binding edge size] Defines how much the binding is outside the package. NOTE Only visible when the se- lection in [Folding method] is set to [With binding edge]. Max 230

  • Oce ColorWave 500, User roles and authorizations Introduction You can view all settings in Océ Express WebTools, but when you want to edit a setting a message appears. This message indicates that the setting is password protected. You must log in with a password to change a setting. IMPORTANT Handle and store all passwords securely and with care. In case of forgotten passwords, a service technician can reset the Key operator, System administrator, Power user passwords only when his rights have been enabled. Otherwise the machine has to be reinstalled. NOTE • When the [User authentica

  • Oce ColorWave 500, 1 2 4. Align the roll with the center of the correct size indicator on the roll holder and release the handle of the locking mechanism. 5. Remove the tapes from the new media roll. Use both hands (as indicated) to place the media roll in the media drawer. Load a media roll Chapter 5 - Maintain the Printing System 265

  • Oce ColorWave 500, Import templates Introduction You can import templates with Océ Express WebTools. Use a zip file with templates that was previously created by the [Export templates] procedure. Procedure 1. Select the [Preferences] - [Fold] tab in Océ Express WebTools for the fold templates. Select the [Preferences] - [Scan] tab in Océ Express WebTools for the scan templates. 2. Click on [Import] at the right hand side. 3. Mark the [Overwrite existing templates] checkbox to overwrite existing templates. When you do not tick the checkbox, duplicate imported templates will be given a serial number. 4. Cli

  • Troubleshoot WebDAV create external location................................. 114 Turn off the printing system..................................22 U Unpack Media roll........................................................262 Update...........................................254, 255, 256, 257 Upload new licenses............................................ 288 Upper back cover..............

  • Oce ColorWave 500, Downloads and support for your product Downloads: User guides, printer drivers (for the Océ printers) and other resources can change without prior notice. To stay up-to-date, you are advised to download the latest resources from: "http://downloads.oce.com" Before you use your product, you must always download the latest safety information for your product: make sure that you read and understand all safety information in the manual entitled 'Safety Guide' . Support For support information please con

  • Oce ColorWave 500, Direct print Introduction When you want to do a default print job: • You can print with direct print. When you print with direct print, the print job is sent to the queue immediately. • You can print without direct print. When you print without direct print you can start the job locally at the printer. NOTE • When the [Preferences] - [System defaults] -[Job management] - [Override destination of print jobs] is set to [Yes, send only to Smart Inbox], you cannot print directly and you have to start the print job at the printer. When you want to print with direct print, you must change this setting in Océ Express WebTools. • For more information on how to

  • Oce ColorWave 500, Rendering intent: Perceptual (photo) This setting optimizes the output to produce best results for photos, artwork, GIS or images. Perceptual rendering tries to preserve some relationship between out of gamut colors, even if this results in inaccuracies for in-gamut colors. Rendering intent: Perceptual (photo) Chapter 3 - Define your Workflow with Océ Express WebTools 149

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Baby Lock Enterprise BNT10L Instruction and reference manual baby-lock/enterprise-bnt10l-69J.pdf 03 Dec 2023 312 19.98 Mb
2 Vax V-020 PU Instruction manual vax/v-020-pu-BY5.pdf 20 Dec 2023 8 0.21 Mb
3 Philips SC1982 Operation & user’s manual philips/sc1982-EY6.pdf 17 Jun 2022 28
4 NETGEAR WG103 - ProSafe - Wireless Access Point Reference manual netgear/wg103-prosafe-wireless-access-point-2X4.pdf 25 Jan 2023 120
5 RocketFish RF-ICAP12 Guía de instalación rápida rocketfish/rf-icap12-568.pdf 18 Jan 2023 2 0.41 Mb
6 RindaTechnologies TechMate Pro Operation & user’s manual rindatechnologies/techmate-pro-E8S.pdf 03 Oct 2023 64

Similar Resources:

  • Canon

    imageRUNNER ADVANCE 615iZ III

    (12 pages)
    FT6-2270 (010) XXXXXXXXXX Copyright CANON INC. 2019 PRINTED IN CHINAGetting StartedF172800Please read "Important Safety Instructions" of the FAQ Guide before operating this product. After you finish reading this guide, store it in a safe place for future reference.The information in this document is subject to change without notice.https://oip. …
  • Ricoh

    SP 210

    (24 pages)
    1SP 210/SP 210SU/SP 210SF/SP 211/SP 211SU/SP 211SF/SP 212w/SP 212Nw/SP 212SUw/SP 212SNw/SP 212SFw/SP 212SFNw/SP 213w/SP 213Nw/SP 213SUw/SP 213SNw/SP 213SFw/SP 213SFNwSetup GuideInstallationsanleitung Manuel d’installation Guida all’installazione InstallationsvejledningGuía de instalación Installatiehandleiding Oppsettveiledning Guia de Configura� …
  • HP

    2210

    (2 pages)
    1296312963121START HEREWindows desktopTurn your PC on and wait for the Windows desktop to appear. Close any open programs, including virus-checking programs.2Attach the coverInsert the two bottom tabs of the cover into the slots on the unit.Tilt the cover down and press firmly. Make sure the tabs lock into place and the cover is even with the unit.4Remove o …
  • Ricoh

    Pro 1106EX

    (6 pages)
    ProductivityQualityPerformanceDurabilityPrinted in U.S.A. on recycled paper because Ricoh cares.Ricoh Pro 906EX/Pro 1106EX/Pro 1356EXSystem SpecificationsGeneral SpecificationsWarm-Up Time Less than 360 secondsPaper Weights16 lb. – 40 lb. Bond50 lb. – 80 lb. Cover90 lb. – 110 lb. IndexStandard Paper Capacity3,000 sheetsTray 1: 2 x 1,000-Sheet TrayTray …
  • Canon

    2435B019

    (2 pages)
    iP2600Photo PrinterPhoto Lab Quality at Home. Stylish Design.• Maximum 4800 x 1200 color dpi1with microscopic droplets as smallas 2 picoliters• Borderless 4" x 6" photo in approx. 55 seconds2• Enhance your photos with Auto Image Fix• FINE Technology for remarkable detail and clarity• Pigment black ink for crisp, laser-quality textSpeed &a …
  • Dell

    5110cn

    (447 pages)
    Dell™ Color Laser Printer 5110cn User's Guide Notes, Notices, and CautionsClick the links to the left for information on the features, options, and operation of your printer. Forinformation on other documentation included with your printer, see "Finding Information."1Optional 500-sheet tray module2Optional 1000-sheet tray moduleNOTE: Your …

Comments, Questions and Opinions: