Optika OT1907F Operation & User’s Manual

Text of Optika OT1907F User Guide:

• Optika OT1907F, Menu Operations Function Menu Options Continued 2. TXT LANGUAGE: To switch the teletext languages. 3. TXT EAST/WEST: To select EAST or WEST . 4.DISPLAY MODE: To select the display mode between 4:3 and FULL SCREEN 5.BLUE SCREEN:To set On, the screen will be in blue screen after 3 seconds if there is no signal. 6. RESET : Press V+ to reset some settings to the factory default . Adjust Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen ADJUST AUTO SYNC. PHASE CLOCK H POSITION V POSITION Note: This menu is only appears in PC mode . 2. Press P+/P- button to enter the adjust menu and to go up and down to select the desired option . 3.Press V+

• Optika OT1907F, Connection Instructions Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Grounding External Equipment Connections Antenna Connection - Antenna or Cable Service with a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) wall antenna socket VHF antenna U

• Optika OT1907F, TELETEXT Teletext Cancel mode This feature allows the TV picture to be displayed while next page to be searched is entered and found. Only the top teletext line is displayed until the page is found. Press the button to hide the teletext information. Either press the button or the Text button to exit the cancel display mode. Language change Pressing the button will change the Teletext characters between Eastern and Western. Hold Pressing the button will stop the teletext page automa- tically updating. This feature is very useful where there are seve

• Advanced Playback PROGRAM When playing discs, press " PROGRAM " to enter program mode. Press the digit buttons to select the program number that you want. When finished, move the cursor to select "START" . This will start the program playback. If you want to cancel this function, press " STOP " , then press "PLAY/ENTER" . REP

• TELETEXT P+ P- V- V+ MENU Teletext Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast (cable networks, satellite channels, etc.). Teletext func

• Optika OT1907F, Playable Discs The following discs can be played: You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labeled as above. The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few cases, their performance may not be very well or even not playable. Support discs: DVD, CD-R, CD-RW, HDCD, JPEG, CD+G, Kodak CD , W MA

• Optika OT1907F, Compare DVD disc with other discs: DVD LD SVCD VCD CD Encode method Digital/MPEG Analog Digital Digital/ MPEG Digital Capacity 650MB 650MB 650MB 133 minutes 242 minutes 266 minutes 484 minutes Playing Time Single-side 60 minutes double-side 120 minutes 45 minutes 74 minutes 74 minutes 12cm 12cm Disc diameter 30cm/20cm 12cm 12cm Horizontal resolution More than 500 line No more than 430 line No more than 350 line No more than 250 line Multiple kinds Picture proportion One kind One kind One kind Subtitle 32 kinds 16 kinds at most 4 kinds Sound quality 48KHz, 96KHz/ 6, 20, 24bit 44.1KHz/

• Optika OT1907F, Menu Operations Function Menu Options Menu Language Selection: The menus can be shown on the screen in the selected language. First select your language. 1. Press MENU and V+/V- button until the following menu appears on the screen 2. Press P+/P- button to select LANGUAGE. 3. Press V+/V- button to select your desired language. From this point on, the on-screen menus will be shown in the language of your choice. INPUT SOURCE TV LANGUAGE ENGLISH TXT LANGUAGE PAN EUROPEAN TXT EAST/WEST

• Optika OT1907F, Menu Operations Tuning Menu Options CHANNEL 1 COLOR SYSTEM AUTO SOUND SYSTEM DK SKIP OFF AFC ON FINE TUNE EXCHANGE MANUAL SEARCH AUTO SEARCH 1. Press MENU and V+/V- button until the following menu appears on the screen 2. Press P+/P- button to enter the tuning menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 an

• Optika OT1907F, Connection Instructions You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). PC Setup Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are off; 3.Connect a D type 15-pin VGA interface cable ( not supplied ) to the VGA video interface connector on the PC. Then connect the other end to the PC video interface connector on the back of the LCD-TV.Tighten the screws on the VGA connectors once they are firmly connected; 4.Turn on the power of the LCD-

• Optika OT1907F, Menu Operations Audio Menu Options continued You can adjust sound options to the levels you prefer. 2. Press P+/P- button to enter the audio menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired sound quality has been achieved .. Function : VOLUME : Adjust the volume of your TV BALANCE : Adjust the balance of the audio output from left to right . When indication value of balance increases toward +50 , sound of the left speaker b

• Optika OT1907F, AV Input Connect audio/video output from an external device to these jacks VGA Input Connect to the VGA 15PIN analog output connector of the PC display card for PC display purpose S-Video Input Connect S-Video out from an S-Video device to the jacks. Antenna Input Connect cable or antenna signals to the TV, either direc- tly or through your cable box. Connection Options Earphone port PC Audio Input Connect the PC output connector from a PC to the audio input port SCART Connect to the DVD/ VCR/broadcasting receiver or other equipment The figure is just for reference, please see the real.) ANT IN AUDIO IN R L VIDEO IN S-VIDEO TV SCART VGA

• Optika OT1907F, To assist in location possible faults use help guide below. Note: 1.If the fault can not be repaired using the above guide consult with your local authorized service center. 2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire. Troubleshooting Guide Troubleshooting No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied

• Optika OT1907F, Safety Notice Items Incorrect usage will cause fire or electric shock. To prevent this, please do as required when you are installing, using and cleaning this machine. To insure your safety and extend the life-span of LCD-TV, please read the following items carefully before using: l Please read and understand all the instructions before operation; l Please keep the book for later use; l Please comply with the warning instructions on the machine and in this book strictly; l Please comply with the instructions provided; l Please d

• Optika OT1907F, DVD System Setup(Continued) DVD System Setup Default: Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset. Note: Some functions may not be available depending on the type of disc. ..Preference Page.. Reset TV Type Parental Password Default Auto SETUP PLAY/ENTER

• Optika OT1907F, Remote Control Key Functions Installing Batteries 3 2 1 1.Slide open the cover of the battery compartment on the back of the remote control. 2.Load two AA alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. Precautions Make sure that there is no obstacle between the remote controller and television set. As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect. Keep the remote controller away from heat source or humid area to ensure e

• Optika OT1907F, Special Function Playback JPEG DISC PLAYBACK Insert a Kodak picture CD or JPEG picture CD into the tray and the disc will be loaded automatically. If the disc type can be identified, the player will start showing the pictures one by one (slide show mode).If a navigation menu will be displayed use the navigation buttons to select a file, then press the PLAY/ENTER button. Each picture in the CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole TV screen. Some slide show transition modes are provided, use "PROGRAM" key to select. Customer can set transition effects for each

• Optika OT1907F, SETUP DVD System Setup DVD System Setup General Setup Process 1.Press the SETUP button, the General Setup Page,Preference Page will be displayed in turn. 2.Press CH+/- b to select, the item, then press to enter the submenu. 3.Press CH+/- bu to select then press PLAY/ENTER to confirm. 4.Press SETUP repeatedly to exit the set-up menus. or or General Setup Page When using the DVD with the internal TV, select 4 3/LB. The following information applies only when the DVD output is connected to an external TV. 4 3/PS (PS = Pan a nd Scan) You may select if you have a normal aspect ratio (4:3) TV, although the NORMAL/LB (letter box) is a more common choice.

• Optika OT1907F, Basic Operating Instructions Select the TV Channel You Want You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the keys on the remote control or on the panel to make a selection. 1. if you want to choose any channel from 0 to 9, please press the -/-- button Until - is indicated on the screen and then press the relevant key on the remote control. for example: if you want to choose channel 8, just press the Key number 8. 2.If you want to choose a channel bigger than 9, please press the -/-- button until -- is indicated on the screen. Enter the two digits of the

• Optika OT1907F, Front Panel Controls Control Panel Function 1. Power supply switch 2.TV/AV Select the input signals: SCART/DVD/PC/AV/SV/TV 3. MENU Press to select the main menu 4. VOL- Volume down / Left orientation to adjust the item in the OSD VOL+ Volume up / Right orientation to adjust the item/Press to enter 5. CH- TV channel down / to select the item in the menu CH+ TV channel up / to select the item in the menu 6. Power indicator Illuminates red in standby mode, illuminates green when

• Optika OT1907F, Connection Instructions VCR Setup Connection and use steps: 1.Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video connectors; 2.Make sure that the power of the LCD-TV and the AV device are off; .Turn on the power of the LCD-TV first ; and then turn on the power of the AV device; 4.Press the TV/AV button to set the video input mode of the LCD-TV to S-VIDEO mode or AV mode. Connection Option 1 Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Connection Option 2 1. Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as shown in the f

• Basic Playback Preparations Press the TV/DVD button on the remote control to enter the DVD status. 1. Place the DVD in the disc slot. The disc will be loaded automatically after one to two seconds, then the DVD player reads the DVD and displays the opening menu. If there is no disc placed on the disc tray in DVD mode, OPEN will display on the screen

• Optika OT1907F, Basic Operating Instructions Turn on the LCD-TV When the POWER button on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the POWER button, the LCD-TVwill go into standby mode and the indicator light turns red. Note: You can also turn on the TV by Pressing digits(1-9) or P+/- SCART PC AV SV Switch Among Different Inputs: TV / SCART / PC / AV / SV/DVD Each time you press the TV/AV button, TV, SCART , PC, AV, SV, will appear o

• Optika OT1907F, Connection Instructions Cable TV Setup - After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. - For further information regarding cable TV service, contact your local cable TV service provider(s). Connection Option 1 1. Select 3 or 4 with channel switch on cable box. 2. Tune the TV channel to the same selected output channel on cable box. 3. Select channels at the cable box or with the cable

• Optika OT1907F, ..General Setup Page.. Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Tv Display 4:3 LB Angle Mark On OsdLang ENG Caption On Screen Saver Off Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off DVD System Setup(Continued) DVD System Setup General Setup Page Caption: This function allows you to display or hide the capti

• Optika OT1907F, Menu Operations 2. Press P+/P- button to enter the picture menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired picture quality has been achieved . Function: BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it will add more light to dark parts of the picture and by decreasing the level ,it will add more dark to light parts of the picture. CONTRAST : Adjust the contrast of the picture . The image becomes higher as the number incr

• Optika OT1907F, Remote Control Key Functions When using the remote control, aim it towards the remote sensor on the TV Stand By DVD Open/close DVD 10+ Scan Zoom Mute Swap Call Screen Display Program Number TV/AV and some other source Exchange Digital Selector TV/DVD Volume/Channel Selection MENU DVD Audio Picture Mode DVD STOP Tune Menu Button DVD SETUP DVD PAUSE/STEP DVD FAST REVERSE DVD FAST FORWARD DVD MENU DVD NEXT DVD PREVIOUS DVD REPEAT DVD PLAY/ENTER DVD A-B REPEAT DVD Cursor Move button DVD SLOW DVD ANGLE DVD S

Related Products and Documents (TV Receiver):

Comparable Devices:

Similar Resources:

• Haier LET26C600F (83 pages) LED LCD TV RECEIVER USER MANUALPlease read this manual carefully before using your television and keep this manual in a good place for future reference.MODEL:LET26C600FLET32C600F …

• Edision piccollino S2+T2/C (2 pages) Congratulations on purchasing an EDISION piccollino S2+T2/CPlease note that this information is valid at the time of publication.Current information and detailed user manuals can be found on the Internet at: www.edision.grUnpackingConnecting and switching onRemote control with 2 AAA batteries Documentation Service note12Receiver piccollino S2+T2/CNotes: The …

• Philips SLV5400 (2 pages) PhilipsWireless TV linkSLV5400Share your satellite & subscription TV channelswithout wiresConnect up to 4 devices to this Wireless TV Link and watch any one of them without having to swap cables. Switch from one to the other device with the remote control unit supplied.Watch and listen anywhere!• Watch any video device on a 2nd TV• Connect 4 device …

• Estar T2-526 HD PVR (20 pages) ENImportant Safety Instructions. Read these instructions.1. Keep these instructions.2. Heed all warnings.3. Follow all instructions.4. Do not use this apparatus near water.5. Clean only with dry cloth.6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.7. Operate this …

• Contemporary Research 232-STSI (20 pages) 17630 Davenport Road, Suite 113 • Dallas, TX 75252 Phone: 972-931-2728 • Toll-Free: 888-972-2728 • Fax: 972-931-2765 E-Mail: [email protected] • Website: www.crwww.com Product Manual 232-STSi Stereo PAL TV Tuner, S-Video Version 6.3 Feb 9, 2009 …

• TechniSat DigiCorder S2 (4 pages) Beokompatible functions OneRemote Interface type 2965 Technisat DigiCorder S1, S2, HD S2 Plus Beo4 and Beolink 1000 are remote control terminals from Bang & Olufsen. OneRemote supplies interface modules that allow third party equipment to be operated via a Bang & Olufsen remote control system. …

Comments, Questions and Opinions: