Manualios.com

Panasonic DMW-FL28E Operating Instructions Manual

Panasonic DMW-FL28E Manual Online:

4.4, 1545 votes
Panasonic DMW-FL28E User Manual
Panasonic DMW-FL28E User Guide
Panasonic DMW-FL28E Online Manual

Text of Panasonic DMW-FL28E User Guide:

  • Panasonic DMW-FL28E, 24 Accessories Wide panel When to use: Use the wide panel when you fit a wide lens down to 24 mm to a 35-mm camera. This wide panel covers the angle of view of a 24-mm lens or narrower for a 35-mm camera. DMW-FL28E.book 24 ページ 2007年3月6日 火曜日 午前10時21分

  • Panasonic DMW-FL28E, 2 Contents Parts Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Before using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  • Panasonic DMW-FL28E, 10 Selecting the shutter speed for use with Analog Cameras For cameras with a focal plane shutter Align the shutter speed selector to the X mark or set the strobe-synchronous shutter speed. • The strobe-synchronous shutter speed varies depending on the camera in use. Please read the operating instructions for your camera carefully. For cameras with a lens shutter The flash is synchronous to the shutter speeds 1/500 sec or slower. • When the shutter speed is 8, 1, 1/2, 1/4, 1/8 or 1/15, is the image may appear blurry. • When the

  • Panasonic DMW-FL28E, 21 °The bounce angle is in principle adjusted so that the angle of reflection B is equal to the angle of incidence A on the reflective surface. Take care that the flash does not strike directly on the subject. °For color photos, if the reflective surface is other than white, the color balance will be lost. DMW-FL28E.book 21 ページ 2007年3月6日 火曜日 午前10時21分

  • Panasonic DMW-FL28E, 25 Specifications • Guide number: (ISO100, m) 28,14,7 (without the wide panel, when using 35 mm lens) 20,10,5 (with the wide panel, when using 24 mm lens) • Flash duration AUTO: Approx. 1/30,000-1/1,000 sec MANUAL: Approx. 1/1,000 sec (GN 28(20))/Approx. 1/3,000 sec (GN 14(10))/Approx.1/8,000 sec (GN 7(5)) • Auto-effective distance: (ISO100, m) F5.6: 0.5-5 m (35 mm (without wide panel))/0.5-3.5 m (24 mm (with wide panel)) F4.0: 0.7-7 m (35 mm (without wide panel))/0.5-5 m (24 mm (with wide panel)) F2.8: 1.0-10 m (35 mm (without wide panel))/0.7-7 m (24 mm (with wide panel)) • Angle of view of photorece

  • Panasonic DMW-FL28E, 17 How to select aperture F number is Guide Number / distance. If the light source on the camera side alone is used, the subject receives only direct light from the front and very dark shadows may appear in the background. When adding one light in a slanting direction, the shadows will be softened. • The procedure to determine the shutter speed is the same as when only one flash is used. Operating distance The operating distance is the maximum distance between the flash at the camera side and the slave (this unit) when the flash and the photoreceptor of the slave face each other. The standard operating

  • Panasonic DMW-FL28E, 8 Connecting the flash to the camera 1. Insert the flash onto the shoe of the camera. 2. Tightly fasten the shoe lock nut. • The flash cannot be installed depending on the camera. Please refer to operating instructions for your camera. DMW-FL28E.book 8 ページ 2007年3月6日 火曜日 午前10時21分

  • Panasonic DMW-FL28E, 7 Test flash 1. Set the rotary switch A to [AUTO]. The flash is turned on and charging starts. 2. Check that the flash indicator lights. 3. Press the test flash button. If the flash lights, it is operating normally. 4. After checking the flashing operation, set the rotary switch A to [OFF]. The flash is turned off. Flash stop mechanism If the flash is not being used temporarily while it is fitted to the camera, set the rotary switch A to [OFF]. The flash will not light even if the shutter button is pressed. M   GN    AUTO F ISO100 AUTO 0.7m∼(W 0.5m∼) F= GN AUTO CHECK PL MANUAL AUTO AUTO OFF TEST LO

  • Panasonic DMW-FL28E, 6 To install batteries (type used: four AA size alkaline, nicad or nickel metal hydride) 1. Slide the battery compartment lid to open as illustrated. 2. Put four batteries into the compartment correctly as indicated in diagram. 3. Close the battery compartment lid. • Batteries are not supplied. Please purchase separately. • Be sure to use the same type of batteries. • Make sure that the batteries are inserted with correct polarities. If they are inserted incorrectly, the flash will not light and leakage of liquid or an explosion may be caused. • When using nicad or nickel metal hydride batteries, recharge them with dedicated chargers. L R 6  1 .

  • 3 Parts Identification Front 1. Flashtube 2. Auto photoreceptor A 3. Auto photoreceptor B (close-up recording) 4. Slave photoreceptor Side 5. Battery compartment lid Back 6. Rotary switch A (power/mode switching) 7. Rotary switch B (AUTO F/MANUAL GN) 8. Test flash button 9. Flash indicator 10.Auto check indicator 11.Wide panel 12.Bouncing angle indicator 13.Shoe lock nut DMW-FL28E.book 3 ペ�

  • 4 Precautions When nicad batteries are used: The batteries will deteriorate in performance if left unused for a long period. Discharge them by manually operating the flash (repeatedly making it light until the flash indicator does not light 30 seconds after blinking) and fully recharge the batteries. When the flash is used in a low-temperature location: T

  • Panasonic DMW-FL28E, 5 Before using This flash has a provision to fit a wide panel for a 24 mm lens (or equivalent to 35 mm system) in front of the flashtube. When using a longer lens than 35 mm (or equivalent to 35 mm system), set the wide panel on the top panel of the flash for storage. DMW-FL28E.book 5 ページ 2007年3月6日 火曜日 午前10時21分

  • Panasonic DMW-FL28E, 9 Selecting the shutter speed and aperture (when using DMC- LC5) When [EXT. FLASH] setting in the menu of DMC-LC5 is set to PRESET mode, set the rotary switch A 1 to [AUTO] and rotary switch B 2 to [F2.8] as illustrated. • When [EXT. FLASH] setting of the DMC-LC5 is in PRESET mode, and DMW-FL28 is attached to the Camera, aperture, shutter speed and ISO sensitivity of DMC-LC5 is automatically set to F2.8, 1/60 and ISO 100. • Please refer to operating instructions for DMC-LC5. • When [EXT. FLASH] setting of the DMC-LC5 is in MANUAL mode, you can manually select the aperture, shutter speed and ISO sensitivity of the camera. Set the aperture and IS

  • Panasonic DMW-FL28E, Auto Flash Operating Instructions Bedienungsanleitung Mode d’emploi Instrucciones de funcionamiento Istruzioni per l’uso Model.No DMW-FL28E Before use, please read these instructions completely. VQT9889 DMW-FL28E.book 1 ページ 2007年3月6日 火曜日 午前10時21分

  • Panasonic DMW-FL28E, 26 four AA size nickel metal hydride: Approx. 0.2-3 sec (AUTO)/Approx. 3 sec (MANUAL) • Number of flashes four AA size alkaline: Approx. 280-1,400 (AUTO)/Approx. 280 (MANUAL) four AA size nicad: Approx. 100-500 (AUTO)/Approx. 100 (MANUAL) four AA size nickel metal hydride: Approx. 200-1,000 (AUTO)/Approx. 200 (MANUAL) • Beam angle: 45o (up/down), 60o (left/right) without wide panel (Covers 35-mm lens view angle for 35-mm camera.) 60o (up/down), 78o (left/right) with wide panel (Covers 24-mm lens view angle for 35-mm camera.) • Bouncing angle: –30o to 90o (Notches are provided at –30o, –15o, 0o, 45o, 60o, 75o and 90o for a click stop.) • Power supply: four AA siz

  • Panasonic DMW-FL28E, 12 Auto check indicator If the auto check indicator lights at the instant of pressing the test flash button, it indicates that the auto circuit is operating. If the auto check indicator does not light, the subject is beyond the auto-effective distance. Adjust either the auto F number with the rotary switch B 2 or the distance to the subject. Selecting the aperture for use with Analog Cameras (for close-up AUTO recording (AUTO )) 1. Fit the wide panel onto the flashtube and set the rotary switch A 1 to [AUTO ] as illustrated.

  • Panasonic DMW-FL28E, 16 Using the slave function (SLAVE) (This function does not work with DMC-LC5’s built in Flash) Perform a test flash. 1. Determine the positions of the flash at the camera side and DMW-FL28 for slave. 2. Direct the slave photoreceptor of the slave unit so that it can receive either direct or reflected light from the flash at the camera side. 3. Turn on both the flash at the camera side and the slave (this flash). Set the rotary switch A to [SLAVE] on the unit. 4. Check that the flash indicator on both units light. 5. When pressing the test flash b

  • Panasonic DMW-FL28E, 18 Close-up recording 1. Fit the wide panel onto the flashtube and adjust bounce on the flash to –15x or –30o depending on the position of the subject. 2. Set the rotary switch A to [AUTO ]. 3. Set the rotary switch B to the desired value. 4. Set the same F number on the camera. Auto F number and auto minimum distance A F number of the flash’s [AUTO ] and the camera B Bounce angle –15o (With the wide panel) C Bounce angle –30o (With the wide panel) DMW-FL28E.book 18 ページ 2007年3月6日 火曜日 午前10時21分

  • Panasonic DMW-FL28E, 15 Selecting the aperture (for MANUAL) 1. Set the rotary switch A 1 to [MANUAL] as illustrated. 2. Calculate the F number based on the Guide Number (GN) table below. Guide Number (GN) table and F number calculation tab A ISO sensitivity B FULL (When fitting the wide panel) C When switiching MANUAL GN (When fitting the wide panel) F number is Guide Number (GN)/distance (m) M   GN    AUTO F ISO100 AUTO 0.7m∼(W 0.5m∼) F= GN AUTO CHECK PL MANUAL AUTO AUTO OFF TEST 1 2 3 4 5 6 7 N 28 14 7 W 20 10 5 16 11 8 5.6 4

  • Panasonic DMW-FL28E, 13 • Auto-effective distance and ISO sensitivity are dependent on automatic aperture control A F number fitting B When fitting the wide panel C ISO sensitivity D F number on the camera • Even if a different ISO sensitivity is set, the auto-effective distance is constant, while the F number should be varied. • Perform a test flash before the actual recording to ensure that the auto check indicator lights. F16 F11 F 8 0.25~1m ISO25 ISO50 ISO100ISO200 ISO400ISO800 F 8 F5.6 F5.6F 4 F11 F11 F11 F 8 F 8 F22 F22 F22 F32 F32 F16 F16 F16 − a b c M   GN    AUTO F ISO100 AUTO 0.7m∼(W 0.5m∼) F= GN AUTO CHECK PL MANUAL AUTO AUTO

  • Panasonic DMW-FL28E, 22 Daytime recording • This is a method, in which unnecessary shadows of subjects are removed by a flash and the brightness of the subjects and that of the background are kept in balance. In this case, use the flash light in the manual mode. For cameras with a lens shutter (Example) Recording in backlight condition When using a 35-mm camera fitted with a 35-mm lens and a ISO sensitivity 100, normal exposure with available light indicated being F11, 1/125 sec (= F8, 1/250 sec) and the recording distance being 3 m: 1. F number for using a flash light is GN/d

  • 19 °For close-up recording, direct the auto photoreceptor for close-up to the subject correctly. The auto minimum distance means the distance between the auto photoreceptor for close-up and the subject. ° The close-up magnification is supposed to be up to 1/2. If the close-up magnification is between 1/2 and real size, open the aperture by approx. 1/2EV

  • 23 °Some cameras allow 1/125 sec or 1/250 sec to be strobe-synchronous. Please read the operating instructions for your camera carefully. DMW-FL28E.book 23 ページ 2007年3月6日 火曜日 午前10時21分

  • Panasonic DMW-FL28E, 27 previous charge. Initially, the batteries will recharge within 30 seconds but the time taken will increase with battery use. DMW-FL28E.book 27 ページ 2007年3月6日 火曜日 午前10時21分

  • Panasonic DMW-FL28E, 20 Bounce recording For bounce recording, the convenience of the [AUTO] operation can be exhibited. Bouncing the light off a reflective surface such as a ceiling, etc. above the flash obtains soft lighting. Auto bounce recording 1. The operating procedure is the same as that for normal auto recording. 2. Determine the position of the subject and then determine the bounce angle of the flash. (The flashtube can be tilted from 0o to 90o upward and the notches are provided at 0o, 45o, 60o, 75o and 90o fo

Related Products and Documents (Camera Flash):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Pyle Pro PYM-6 Owner's manual pyle-pro/pym-6-WX2.pdf 25 Jan 2023 8
2 Philips PPX1430/EU Quick start philips/ppx1430-eu-9BN.pdf 27 Jun 2022 2 1.66 Mb
3 3Com 3C16593B Product manual 3com/3c16593b-9QO.pdf 20 Jan 2024 14 1.71 Mb
4 Sharp EL-2192R Operation manual sharp/el-2192r-2R1.pdf 28 Nov 2023 2 0.18 Mb
5 Roland FC-100 Operation & user’s manual roland/fc-100-J7Q.pdf 24 Nov 2022 4 0.17 Mb
6 HP BL685c - ProLiant - 4 GB RAM Datasheet hp/bl685c-proliant-4-gb-ram-372.pdf 11 Jun 2023 313 1.39 Mb

Similar Resources:

  • Rollei

    LUMIS Mini LED

    (16 pages)
    www.rollei.deLUMIS Mini LEDLeistungsstarke LED Leuchte Powerful LED light95+CRIAnleitung | Manualin German | English | French Spanish | Italian | Portuguese Dutch …
  • Godox

    AD300Pro

    (22 pages)
    INSTRUCTION MANUAL705-AD30P0-00/Add: 2Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen, China /Tel: +86-755-29609320(8062) /Fax: +86-755-25723423 /E-mail: [email protected] http://www.godox.com …
  • Sony

    HVL-F20S

    (3 pages)
    Extends ash range beyond camera’s included ashThough compact and lightweight, the HVL-F20S has a maximum range twice that of the included ash units of the NEX-3, NEX-5, and NEX-C3 cameras. This is represented as the guide number (GN) of 20 with a 50mm focal distance.Bounce ash enables shadowless indirect lightingWhen set to ‘indoor’ shootin …
  • Insignia

    NS-DFLMR1

    (2 pages)
    Quick Setup Guide | NS-DFLMR1Macro Ring FlashPACKAGE CONTENTS• Macro ring ash• 6 lens adapters (49mm, 52mm, 55mm, 58mm, 62mm, 67mm)• Quick Setup GuideFEATURES• Compatible with all DSLR cameras with a ash hot-shoe• Can operate remotely with PC sync cable (not included)• 3.75" light ring with guide number of 10m at ISO 100� …
  • Pixel

    King

    (2 pages)
    143 56Wireless TTL Flash TriggerKingFor NikonInstruction ManualThank you for purchasing Pixel product --- King. King achieves high-sync flash shooting with Nikon cameras and other creative lighting function including I-TTL, M, FP etc. King supports shutter speeds up to 1/8000 s. King has 3 different groups; each group can use mult …
  • Ikelite

    AF35

    (4 pages)
    AF35 Tray with T-Mount(s)Product Numbers 9523.43 • 9523.44 • 9523.45Product RegistrationPlease register your product at ikelite.com within 15 days of purchase. Our product registration database is the best way for us to get a hold of you in the event of a product update or recall. …

Camera Flash Instructions:

Comments, Questions and Opinions: