Manualios.com

Rexing V1P Operation & User’s Manual

Rexing V1P Manual Online:

4.85, 897 votes
Rexing V1P User Manual
Rexing V1P User Guide
Rexing V1P Online Manual

Text of Rexing V1P User Guide:

  • Operating your V1P Dashboard Camera System Settings 40 © 2015 REXING A ll Righ ts Re s er v ed . 3. Press the DOWN button once to select "Delete" 4. Press OK once to view options for "Current MOV" file or "ALL" files. Select "Current MOV" 5. Press OK twice to delete file To delete all files: 1. Press on UP or DOWN but

  • Rexing V1P, Operating your V1P Dashboard Camera System Settings 38 © 2015 REXING A ll Righ ts Re s er v ed . GPS Select GPS speed unit (GPS Logger required) 1. Press MENU twice to enter System Settings 2. Press the UP or DOWN button to navigate to the "GPS" option 3. Press OK to view the current selection: KM/H / MI/H / OFF 4. Press the UP or DOWN button to make your selection 5. Press OK to confirm your entry 6. Press MENU to exit System Settings Update time of GPS This feature need GPS Logger

  • Rexing V1P, Operating your V1P Dashboard Camera Video Settings 32 © 2015 REXING A ll Righ ts Re s er v ed . Date Stamp You have the option to display the date and time in your videos. Note that the date and time stamp cannot be removed from videos if this feature was enabled at the time of recording. 1. Press MENU once to enter Video Settings 2. Press the UP or DOWN button to navigate to the "Date Stamp" option 3. Press OK to view the current ON/OFF status for this feature 4. Press the UP or DOWN button to enable or disable this feature 5. Press OK to confirm your entry 6. Press MENU to exit Video Settings Plate Number

  • Rexing V1P, Operating your V1P Dashboard Camera System Settings 34 © 2015 REXING A ll Righ ts Re s er v ed . SYSTEM SETTINGS Date/ Time Setup Use the following procedure to change the device’s time and date: 1. Press MENU twice to enter System Settings 2. Press the DOWN button to navigate to the "Date/Time" option 3. Press OK to view date/time in the format: YYYY/MM/DD HH:MM:SS 4. Press the UP or DOWN button to change the highlighted number 5. Press OK to move to the next date

  • Rexing V1P, Operating your V1P Dashboard Camera Video Settings 29 © 2015 REXING A ll Righ ts Re s er v ed . Loop Recording Recommend setting: 3 Minutes With Loop Recording Mode enabled, the device will continuously erase older video as it records new video, keeping only the images captured over a user- selected time range. All video older than this range will be replaced with new video. (Note: any locked video files on the memory card will remain protected, and will not be automatically deleted during Loop Recording.) It is recommended that you reformat a memory card after every time that images are transferred from it to a computer, or at least once a month.

  • Rexing V1P, 1 © 2015 REXING A ll Righ ts Re s er v ed . USER MANUAL All brand and product names are trademarks or registered trademarks of DWCO ELECTRONICS CO., LTD. The information in this manual is subject to change without notice. www.rexingusa.com 06/2016Rev3

  • Rexing V1P, 2 © 2015 REXING A ll Righ ts Re s er v ed . Safety information To prevent injury to yourself or others, or damage to your device, read all safety information before using. Warning Failure to comply with safety warnings and regulations can result in serious injury or death. Do not use damaged power cords or plugs, or loose electrical sockets. Faulty connections can cause electric shock or fire. Do not touch the car charger with wet hands or disconnect the charger by pulling th

  • Rexing V1P, Operating your V1P Dashboard Camera Photo Settings 46 © 2015 REXING A ll Righ ts Re s er v ed . Quick Review Enabling this feature will allow you to immediately view each captured image for a few seconds before taking the next photo. 1. Press MODE once to enter Photo Mode 2. Press MENU once to enter Photo Settings 3. Press the UP or DOWN button to navigate to the "Quick Review" option 4. Press OK to view the current selection: OFF/2SEC/5SEC 5. Press the UP or DOWN button to make your selection 6. Press OK to confirm your entry 7. Press MENU to exit Photo Settings 8. Press OK to capture an image D

  • Rexing V1P, 12 © 2015 REXING A ll Righ ts Re s er v ed . Contents PRODUCT SPECIFICATIONS ......................................................................... 15 GETTING STARTED ........................................................................................ 16 Device Layout ............................................................................................... 16 Buttons ......................................................................................................... 17 Status Icons .................................................................................................. 18 Package Contents .................................

  • Rexing V1P, Getting Started Installing your V1P Dashboard Camera 25 © 2015 REXING A ll Righ ts Re s er v ed . It is recommended that you reformat a memory card after every time that images are transferred from it to a computer, or at least once a month. Reformatting a memory card keeps important elements of data and file structure clean, helping to prevent error messages and missing images. Reformatting also restores the memory card, which can help prevent it from becoming corrupted. Removing the memory card Before removing a memory card from your computer, you must first unmount it for safe removal. Before removi

  • Rexing V1P, Operating your V1P Dashboard Camera System Settings 35 © 2015 REXING A ll Righ ts Re s er v ed . Beep Sound This setting allows you to turn the device's button sound effect on or off. 1. Press MENU twice to enter Setup 2. Press the UP or DOWN button to navigate to the "Beep Sound" option 3. Press OK to view the current ON/OFF status for this feature 4. Press the UP or DOWN button to enable or disable this feature 5. Press OK to confirm your entry Language Use the following procedure to change the device’s tim

  • Rexing V1P, Getting Started Installing your V1P Dashboard Camera 24 © 2015 REXING A ll Righ ts Re s er v ed .  If the device is not charging properly, take the device and the charger to an authorized Rexing Service Center. Connecting the charger improperly may cause serious damage to the device. Any damage caused by misuse is not covered by the warranty. Inserting the memory card Your device accepts memory cards with a maximum capacity of 32GB. Depending on the memory card manufacturer and type, some cards may not be compatible with your device. Using an incompatible card may damage t

  • Rexing V1P, Operating your V1P Dashboard Camera Photo Settings 43 © 2015 REXING A ll Righ ts Re s er v ed . Sharpness This feature will automatically enhance captured images for a clearer, more distinct picture. 1. Press MODE once to enter Photo Mode 2. Press MENU once to enter Photo Settings 3. Press the UP or DOWN button to navigate to the "Sharpness" option 4. Press OK to view the current selection: STRONG/NORMAL/SOFT 5. Press the UP or DOWN button to make your selection 6. Press OK to confirm your entry 7. Press MENU to exit Photo Settings 8. Press OK to capture an image Whi

  • Rexing V1P, Getting Started Installing your V1P Dashboard Camera 21 © 2015 REXING A ll Righ ts Re s er v ed . Installation Video guide: video.rexingusa.com 1. Attaching the front camera to the window mount Before the device can be used in a car, it is essential to first install a properly attached window mount. Make sure that you place the recorder in a safe, appropriate location where it will not obstruct the driver’s view. Clean windshield before apply mount, do not attach camera for at least 20 minutes. 2. Mounting the rear camera Mount the rear camera as shown below, using rear camera extension cable, connect rear camera to the main unit.

  • Operating your V1P Dashboard Camera Photo Settings 41 © 2015 REXING A ll Righ ts Re s er v ed . PHOTO SETTINGS Resolution This option allows you to set the pixel resolution for captured images. 1. Press MODE once to enter Photo Mode 2. Press MENU once to enter Photo Settings 3. Press the UP or DOWN button to navigate to the "Resolution" option 4. Press OK to view c

  • Operating your V1P Dashboard Camera Troubleshooting 52 © 2015 REXING A ll Righ ts Re s er v ed . Problem Possible Cause Solution Recording stops unexpect- edly in Video Mode Incompatible memory card is inserted Use a compatible class- 10 microSD card with a capacity of at least 8GB “File error" is encountered when trying to play back pictur

  • Rexing V1P, Operating your V1P Dashboard Camera Driving Recorder Player 50 © 2015 REXING A ll Righ ts Re s er v ed . The Software Main Screen A. Menu B. Video player C. Longitude and latitude D. Speedometer E. Playlist F. Mini logger G. Google Map

  • Rexing V1P, 10 © 2015 REXING A ll Righ ts Re s er v ed . Third party services may be terminated or interrupted at any time, and Rexing makes no representation or warranty that any content or service will remain available for any period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which Rexing has no control. Without limiting the generality of this disclaimer, Rexing expressly disclaims any responsibility or liability for any interr

  • Rexing V1P, Operating your V1P Dashboard Camera Video Settings 30 © 2015 REXING A ll Righ ts Re s er v ed . Time-lapse Record Recommend setting: Off Time-lapse photography is a technique whereby the frequency at which film frames are captured (the frame rate) is much lower than that used to view the sequence. When played at normal speed, time appears to be moving faster and thus lapsing. 1. Press MENU once to enter Video Settings 2. Press the UP or DOWN button to navigate to the " Time-lapse Record" option 3. Press OK to view the current selection: 100Ms/200Ms/500Ms/OFF 4. Press the UP or DOWN button to make your selection 5. Press OK to

  • Rexing V1P, 6 © 2015 REXING A ll Righ ts Re s er v ed . Do not store your device in excessively hot, cold, damp or dry locations. Doing so may cause the screen to malfunction, result in damage to the device, or cause the battery to explode. Your device is recommended for use within a temperature range of -10 °C to 70 °C, and a humidity range of 10% to 80%. If your device becomes overheated, allow it to cool down before use. Prolonged exposure of skin to an overheated device may cause low- tem

  • Rexing V1P, Operating your V1P Dashboard Camera Troubleshooting 51 © 2015 REXING A ll Righ ts Re s er v ed . General Troubleshooting Problem Possible Cause Solution The captured image is not stored 1. Memory card may be full or malfunctioning 2. Image not being saved before the device is powered off 1. Reformat memory card or replace with a new one 2. Make sure to stop recording before shutting down All buttons are not responding 1. Processing error or faulty device operation 2. Memory card may contain errors, or is damaged 1. Press the RESET but

  • Rexing V1P, Operating your V1P Dashboard Camera Photo Settings 44 © 2015 REXING A ll Righ ts Re s er v ed . Color This feature allows you to choose a color effect for captured images. 1. Press MODE once to enter Photo Mode 2. Press MENU once to enter Photo Settings 3. Press the UP or DOWN button to navigate to the "Color" option 4. Press OK to view the current selection: Color/Black & White/Sepia 5. Press the UP or DOWN button to make your selection 6. Press OK to confirm your entry 7. Press MENU to exit Photo Settings 8. Press OK to capture an image ISO This setting en

  • Rexing V1P, Operating your V1P Dashboard Camera System Settings 39 © 2015 REXING A ll Righ ts Re s er v ed . 2. Press the UP or DOWN button to navigate to the "Default Settings" option 3. Press OK to view YES / NO confirmation for this operation 4. Press the UP or DOWN button to make your selection 5. Press OK to confirm your entry 6. Press MENU to exit System Settings Playback Mode You can play back recorded video on your device using the following steps: 1. Press REC to stop recording 2. Press MODE twice to switch from Recording to Playback Mode 3. Press and hold the UP or DOWN button to navigate through the stored video files 4. Press OK to start playback f

  • Rexing V1P, Getting Started Overview of your V1P Dashboard Camera 16 © 2015 REXING A ll Righ ts Re s er v ed . GETTING STARTED Device Layout 1. Mode Button 2. Up Navigation Button Record Button 3. OK (Confirm) Button Emergency Lock Button 4. Down Navigation Button Mute/Unmute Button 5. Screen ON/OFF Button 6. MircoSD Card Slot 7. Power On/ Off Switch 8. Reset Button 9. Menu Button 10. Lens Angle Adjuster 11. USB Charging Port 12. GPS Module Port 13. Rear Camera Port

  • Rexing V1P, 7 © 2015 REXING A ll Righ ts Re s er v ed . Clean your device and charger by wiping with a towel or eraser. Do not use chemicals or detergents. Doing so can discolor or corrode the outside of the device, and may result in electric shock or fire. Do not distribute copyright-protected material. Doing so without the permission of the content owners may violate copyright laws. The manufacturer is not responsible or liable for any legal issues that result from the user’s illegal use of copyrighted material.

  • 15 © 2015 REXING A ll Righ ts Re s er v ed . PRODUCT SPECIFICATIONS Image Sensor 5MP CMOS Lens Fixed-focus with full-glass elements Aperture F = 2.8 CPU Novatek LCD 2.4 inch, 4:3 TFT Audio Built-in high-sensitivity microphone/speaker External Memory Class 10 or above MicroSD card (SDHC spec.) Gravity Sensor Low / Medium / High / OFF Shut

  • Getting Started Installing your V1P Dashboard Camera 23 © 2015 REXING A ll Righ ts Re s er v ed . Charging the battery Charge the device by connecting the camera via the USB car charger port. Use only Rexing-approved chargers. Using unapproved chargers or cables can damage the device or cause the battery to explode. Connect the car charger’s jack to the USB charging port

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Craftsman 917.372860 Owner's manual craftsman/917-372860-R2C.pdf 13 Mar 2024 28 2.07 Mb
2 Compaq N1000v Quickspecs compaq/n1000v-PFK.pdf 05 Oct 2023 33 0.27 Mb
3 Lucent Technologies 9601 Quick reference lucent-technologies/9601-161.pdf 20 Oct 2023 6
4 Westinghouse RO-29 Manual  westinghouse/ro-29-Q46.pdf 07 Nov 2022 10
5 Canon Sure Shot Classic 120 Instructions manual canon/sure-shot-classic-120-FL4.pdf 23 Jul 2022 49 1.24 Mb
6 ATEN UC-100KM Operation & user’s manual aten/uc-100km-EEI.pdf 17 Jul 2022 2

Similar Resources:

  • Sony

    ICD-MX20

    (2 pages)
    ICD-MX20DR9 Digital Voice Recorder Step-up New Includes Dragon NaturallySpeaking® Preferred Voice to Print SoftwareHybrid Storage - Flash Memory Stick® Media New STLP Recording Mode: Up to 2 Hours 45 Minutes Recording Time on Built-In Memory2 Up to 11 Hours 35 Minutes Recording Time (LP Mode)2 Over 300 Personalized FoldersBuilt-in Stereo and Directio …
  • Franklin

    SPELLING BEE SSB-208

    (6 pages)
    License Agreement (U.S. only)READ THIS LICENSE AGREEMENT BEFORE USING THE ELECTRONIC REFERENCE. YOUR USE OF THE ELECTRONIC REFERENCE DEEMS THAT YOU ACCEPT THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THESE TERMS, YOU MAY RETURN THIS PACKAGE WITH PURCHASE RECEIPT TO THE DEALER FROM WHICH YOU PURCHASED THE ELECTRONIC REFERENCE AND YOUR PURCHASE PRICE WI …
  • Velleman

    DVM171THD

    (2 pages)
    DVM171THD V. 02 – 17/05/2013 1 ©Velleman nv Installation steps to use the DVM171THD on Windows 7 1. Insert the included CD-ROM into the DVD or CD station. Attention: Do not connect the DVM171THD to the PC yet. 2. Go to [Computer] ([My Computer] in XP) via menu [Start]. 3. Next, right-click on [DVD/CD-RW (ROM)] and select [Explore]. 4. Search for …
  • Ramsey Electronics

    CB1

    (23 pages)
    CB-1 • 1 Ramsey Electronics Model No. CB1 Getting tired of repeating yourself? Find yourself saying the same thing over and over? Here's the answer to your prayers! This kit will repeat your voice with amazing clarity over and over, without ever getting tired, in a number of different ways! Not only that, it preserves your voice even whe …
  • Olympus

    VN-7000PC

    (12 pages)
    1--This symbol [crossed-out wheeled bin Directive 2006/66/EC Annex II] indicates separate collection of waste batteries in the EU countries. Please do not throw the batteries into the domestic refuse. Please use the return and collection systems available in your country for the disposal of the waste batteries.This symbol [crossed-out wheeled bin WEEE Annex …
  • T&D

    TR-71W

    (2 pages)
    Network Communication Type Temp/Humidity Data Logger This Introductory Manual explains in a simple manner the basic operations and set up for TR-71W / TR-72W. For a more detailed explantion, see the User's Manual on the provided CD-ROM. This data logger is designed for network communication. It does not include any RS-232 or USB communication interfa …

Comments, Questions and Opinions: