Manualios.com

Alpine SEC-8063 Owner's Manual

Alpine SEC-8063 Manual Online:

4.6, 2571 votes
Alpine SEC-8063 User Manual
Alpine SEC-8063 User Guide
Alpine SEC-8063 Online Manual

Text of Alpine SEC-8063 User Guide:

  • Alpine SEC-8063, 104 English Advanced Operation Tripped Sensor History The Security Display Module can display up to eight of the last tripped sensors. In addition to the type of sensor, the system will also report the time and date that the sensor was tripped. After disarming, turn the ignition switch to the ON position. If the alarm was tripped during your absence, the system will report the last-most tripped sensor. The sensor name, date and time will appear in the Security Display module. Display Pattern After “SENSOR NAME + DATE” have been scrolled one time, “TIME” is repeatedly displayed for 3 seconds. • DOOR DATE / TIME • HOOD / TRUNK DATE / TIME • IMPACT DATE / TIME �

  • Alpine SEC-8063, 102 English Advanced Operation System Integration Setup (Continued) To switch the various System Integration Setup menu settings, press the TX/PANIC button and set. Example: NAVIGATION INTEGRATION setting Press the TX/PANIC button during the “NAVIGATION INTEGRATION OFF” scroll display. The scroll display will change to “NAVIGATION INTEGRATION ON”. To switch the various System Integration Setup menus, press the EXT2/EXT3 or EXT1/VALET button. EXT2/EXT3 button: DOWN EXT1/VALET button: UP Example: Press the EXT2/EXT3 button during the “NAVIGATION INTEGRATION xx” scroll display. The scroll display will change to “MAYDAY INTEGRATION xx�

  • Français Español 95 Operación avanzada Opération avancée Configuration du détecteur (suite) Pour commuter entre les diverses fonctions, appuyer sur la touche EXT2/EXT3 pour descendre dans la liste et la touche EXT1/ VALET pour la remonter. Touche EXT2/EXT3: Décroissant Touche EXT1/VALET: Croissant Exemple: Appuyer sur la touche EXT2/ EXT3 pendant l’affichage déroulant “DOOR xx”. L

  • 164 English English/Français/Español SEC-8205 Digital Paging System Système de téléavertisseur numérique SEC-8205 Sistema de telellamada digital SEC-8205 SEC-8343 EXT Expansion Module Module d'expansion EXT SEC-8343 Módulo de expansión EXT SEC-8343 When connected to the security system, the SEC-8205 Digital Paging System will notify you, from up to one mile away (depen

  • Alpine SEC-8063, 158 English English/Français/Español Digital Pager Data Output (Optional SEC-8205) Sortie de données de téléavertisseur numérique (optionnel SEC-8205) Salida de datos de telellamada digital (SEC-8205 opcional) Alarm Silence Feature Caractéristique de silence de l'alarma Característica de silenciador de la alarma Priority Door Unlocking Priorité de déverrouillage de porte Prioridad de Desbloqueo de puertas The system comes with an output to connect to the optional SEC-8205 Digital Paging System. The SEC-8205 will notify you, up to a half mile away, of an anomaly with the security system. It will inform you i

  • Alpine SEC-8063, 88 English Advanced Operation Function Setup Enter Function Setup mode. (See Page 86.) In the Function Setup Mode, the following settings can be changed. Function Setup Menu 1 2 TX PANIC Menu Name ARMING CHIRP AUTO LOCK IGNITION LOCK IGNITION UNLOCK MODE DURATION DOOR LOCK PULSE PANIC ARM CAR RELOCK DOOR UNLOCK PULSE EXIT DELAY CHIRP (Pre-Warn) ALARM OUTPUT WARNING OUTPUT SENSOR SCAN SIREN PRIORITY UL PRE-WARN WARNING CHIRP Setup ON OFF OFF OFF MANUAL 30 SEC OFF ONE OFF 10 SEC SHORT CONSTANT CONSTANT OFF ON OFF OFF ON OFF ON ON ON AUTO 60 SEC ON TWO ON 30 SEC LONG PULSED PULSED ON OFF ON ON OFF 700MSEC 900MSEC 3SEC 15SEC 700MSE

  • Alpine SEC-8063, 142 English English/Français/Español EXT Setup Programmable Features 1 sec: Pressing MODE button sends an output for 1 sec. Cont: Pressing and holding the MODE button will transmit as long as the button is held down. Latched: Pressing MODE button enables the output until disabled when the button is pressed again. 1 sec: Pressing MODE button sends an output for 1 second. Disable: The impact and ignition sensors will not be disabled for 20 minutes when the EXT-1 output is activated. Enable: The impact and ignition sensors will be disabled for 20

  • Alpine SEC-8063, Français Español 127 Operación avanzada Opération avancée Contrôle audio (optionnel) En combinaison avec une interface infra- rouge audio, le système audio peut être contrôlé avec un transmetteur de télécom- mande SEC-8463. Placer la clé de contact sur la position ON. L'affichage de l'horloge apparaîtra sur l'affichage. Appuyez sur les boutons TX/PANIC et EXT1/ VALET. Le mode de contrôle audio est installé et “ALPINE CAR AUDIO” défile sur l'affichage. Fonctions du transmetteur de télécommande Remarque: Référez-vous également au manuel du propriétaire du système audio. Mise en/hors tension TX/PANIC A

  • Alpine SEC-8063, 160 English English/Français/Español Remote Control Transmitter Battery Replacement (SEC-8463) Place the SEC-8463 on a flat surface with the buttons facing downward. Remove the battery case screws using a Phillips screw- driver. While holding the unit with the buttons facing upward, remove the top cover by gently lowering the bottom cover and pulling the top cover toward you. To remove the battery, insert a pointed object onto the slot of the battery holder and lift the battery. Insert a new Lithium battery (#CR2032). Make sure the battery polarity is correct. Replace the top cover by inserting the upper end fi

  • 16 English Basic Operation Security Display Module The Security Display Module (Model number SEC-8349) allows visual display of a variety of security and convenience features and functions. The Security Display Module is composed of the following items: 1 Date/Time Icon 2 Tripped Sensor Icon (ALARM) 3 Faulty Sensor Icon (FAULT) 4 Security Programming Icon (PROG.) 5 Val

  • Alpine SEC-8063, Français Español 15 Operación básicaOpération de base Transmetteur de télécommande Deux transmetteurs à cinq boutons (pièce n° SEC-8463) sont fournis avec le système de sécurité SEC-8063. La télécommande du SEC-8463 permet l’armement, le désarme- ment, l’armement panique et l’activation EXT du système de sécurité SEC-8063 à distance. De plus, le SEC-8463 permet aussi de contrôler un second système de sécurité. Voici une description succincte des fonc- tions de chaque composant du transmetteur de télécommande: 1 Indicateur LED La L

  • Alpine SEC-8063, 46 English Basic Operation Impact and Radar Sensor Operation The SEC-8063 security system comes standard with an impact sensor which provides two levels of impact protection. The impact sensor gives a warning when a light impact is placed on the vehicle and will enter a full alarming state when a heavy impact is placed on the vehicle. The SEC-8063 is capable of controlling the optional SEC-8346 Dual Sector Digital Radar Sensor. This optional sensor emits a high frequency (microwave) signal that is changed wh

  • Alpine SEC-8063, 18 English Basic Operation Remote Controlled Arming The SEC-8063 can be armed by the SEC- 8463 remote control transmitter after all the doors are closed. Remove the key from ignition. Exit from the vehicle and close all doors. Press and release the TX/PANIC button. (The remote control LED will illuminate to indicate that the signal is being transmitted.) ACC OFF ON RUN 1 2 3 TX PANIC

  • Alpine SEC-8063, 94 English Advanced Operation 4 EXT 1 VALET or/ou/o EXT 2 EXT 3 Sensor Setup (Continued) To switch between the various features, press the EXT2/EXT3 button to scroll down the list and EXT1/VALET button to scroll up the list. EXT2/EXT3 button: DOWN EXT1/VALET button: UP Example: Press the EXT2/EXT3 button during the “DOOR xx” scroll display. The scroll display will change to “DOOR SENSOR xx”. Note: Pressing MODE button returns to “SENSOR SETUP” scroll display. To exit Sensor Setup, set ignition to OFF or leave ignition ON and set the Disarm/Valet switch to ON to return to the clock display. 5 ACC OFF ON RUN or/ou/o VALET Le

  • Alpine SEC-8063, 96 English Advanced Operation EXT Setup Call the EXT Setup mode. (See Page 86.) Press the TX/PANIC button during the “EXT SETUP” scroll display. EXT Setup Menu Notes: • See Page 140 for details about the EXT Setup menu. • Pressing MODE button returns to “EXT SETUP” scroll display. To switch the various EXT Setup menu settings, press the TX/PANIC button and set. Example: EXT-1 setting Press the TX/PANIC button during the “EXT-1 1 SEC” scroll display. The scroll display will change to

  • Alpine SEC-8063, 86 English Advanced Operation Security Programming (Continued) Press the TX/PANIC button. This will set the Security Programming setup mode. Security Programming setup mode FUNCTION SETUP (See Page 88.) SENSOR SETUP (See Page 92.) EXT SETUP (See Page 96.) SYSTEM INTEGRATION SETUP (See Page 100.) Press the EXT2/EXT3 or EXT1/VALET button to switch the Security Programming setup mode. EXT2/EXT3 button: UP EXT1/VALET button: DOWN Note: Pressing MODE button returns to “SECURITY PROGRAMMING” scroll display. 4 TX PANIC or/ou/o EXT 2 EXT 3 EXT 1 VALET

  • Alpine SEC-8063, Français Español 129 Operación avanzada Opération avancée Contrôle audio (optionnel) (suite) Appuyez sur les touches TX/PANIC et EXT1/ VALET dans le mode de contrôle audio. Le mode de contrôle audio disparaît et l’écran affiche à nouveau l’horloge. Remarque: Placer l’interrupteur d’alimenta- tion sur OFF pendant le mode de contrôle audio fait disparaître celui-ci et l’affichage revient au mode de désarmement. Control de audio (opcional) (continuación) Presione los botones TX/PANIC y EXT1/ VALET en el modo de control de audio. El modo de control de audio finaliza y la pantalla vuelve a la visualización del reloj. Nota: Cuando se pone el interruptor de ignición en

  • 144 English English/Français/Español System Integration Setup Programmable Features Off: Disables communication between Mayday system and Navigation system. On: Enables communication between Mayday system and Navigation system. Not Connect: The SEC-8063 is not con- nected to the optional HCX- B200A Mobile Mayday System. Enable: The SEC-8063 is connected and fully functional

  • Alpine SEC-8063, 8 English Basic Operation Proper wire connections and component placement are essential for optimum system performance. Due to the expertise and time required to properly install an Alpine Digital Remote Control Security System, it is highly recommended that the installation be performed by an authorized Alpine dealer. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with INDUSTRY CANADA RSS-210. Operation is subject to the followi

  • Alpine SEC-8063, 26 English Basic Operation 1 TX PANIC 1 Remote Controlled Disarming The SEC-8063 can be disarmed by the SEC- 8463 remote control transmitter using the disarm/valet switch. Press and release the TX/PANIC button. (The remote control LED will illuminate to indicate that the signal is being transmitted.) The siren will "chirp" twice. (If siren on/off selection is set ON.) The parking lights will flash twice. The doors will unlock. (If so configured by your installer, the system can only unlock the driver’s door when the system is disarmed. This feature is called “Priority Unlock”. To unlock all other doors using the Priority Unloc

  • Alpine SEC-8063, 30 English Basic Operation 1 2 3 ACC OFF ON RUN VALET Coded Disarm For increased protection, a disarm code can be registered into the SEC-8063 for manual disarming. Please see page 116 for informa- tion on registering the disarm code number. The following shows how to disarm the vehicle using the Coded Disarm feature. Enter the vehicle. The security system will sound the siren. Turn the ignition switch to the ON position and make sure all doors are closed. Press the Disarm/Valet switch momentarily. “CO

  • Français Español 121 Operación avanzada Opération avancée Comprobación de la batería El SEC-8063 le permite visualizar el voltaje de la batería del vehículo. Esto es útil a la hora de determinar si re-arrancar o no el vehículo mientras reproduce el sistema audio de coche Alpine. Girar la llave de encendido a la posición ON. La visualización del reloj aparecerá en

  • Alpine SEC-8063, Français Español 25 Operación básicaOpération de base Armement automatique (passive) (suite) Quand le système est armé automatique- ment, on peut observer ce qui suit: La sirène émet un son strident. (Si la sirène n'est pas réglé sur OFF dans le menu de configuration.) Les feux de stationnement clignotent une fois. Les portières se verrouillent. Le témoin (LED) d'extension clignote. Remarques: • Le SEC-8063 incorpore une caractéristi- que appelée dérivation de détecteur défectueux. Pour plus de détails se reporter à la page 155. • Les feux de stationnement clignotants et les verrouillages des

  • Alpine SEC-8063, 90 English Advanced Operation 3 Function Setup (Continued) To change a specific feature’s setting, press the TX/PANIC button. Example: ARMING CHIRP setting Press the TX/PANIC button during the “ARMING CHIRP ON” scroll display. The scroll display will change to “ARMING CHIRP OFF”. To switch between the various features, press the EXT2/EXT3 button to scroll down the list and EXT1/VALET button to scroll up the list. EXT2/EXT3 button: DOWN EXT1/VALET button: UP Example: Press the EXT2/EXT3 button during the “ARMING CHIRP xx” scroll display. The scroll display wil

  • Alpine SEC-8063, 4 English Basic Operation WARNING Caution DO NOT OPERATE THE EQUIP- MENT OR LOOK AT THE SCREEN WHILE DRIVING THE VEHICLE. Operating the equipment may distract the driver from looking ahead of the vehicle and cause accident. Always stop the vehicle in a safe location before operating this equipment. DO NOT USE THIS EQUIPMENT FOR PURPOSES OTHER THAN STATED FOR THE VEHICLE. Failure to do so may result in electric shock or injury. English Precautions The exclamation point within an equilateral triangle and "WARNING" are intended to alert the user to t

  • Alpine SEC-8063, Français Español 75 Operación avanzada Opération avancée Mode de réglage du détecteur de radar optionnel Retirer la clé de contact Enclencher le commutateur de désarme- ment/valet, et le tenir pendant une seconde. Le témoin d'extension luit en rouge pendant une seconde. Enfoncer et relâcher les touches TX/PANIC et EXT1/VALET simultanément. Le message "RADAR SENSOR ADJUSTMENT MODE" (Mode de réglage du détecteur radar) défile sur le module de l’affichage de sécurité. Le système est en mode de réglage du secteur radar extérieur (EXT). La touche TX/PANIC augmente le champ alors que la touche EXT1/VALET le réduit. Un chiffre de 1 à 30 est af

  • Alpine SEC-8063, Français Español 125 Operación avanzada Opération avancée Démonstration Le module d’affichage de sécurité SEC-8349 peut fonctionner en mode démonstration pour afficher les possibilités et les fonctions du système. Ne pas oublier de sortir de ce mode avant de démarrer pour éviter toutes les distractions qu’il procure. Pendant l’activation du mode de désarme- ment, valet, ou allumage, placer le commuta- teur de désarmement/valet et le maintenir en position ON. Appuyer sur la touche MODE pendant que le commutateur de désarmement/valet est en position ON. La démonstration commence lorsque “DEMO MODE” a défilé une fois sur l’affich

Related Products and Documents (Car Alarm):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 RCA RS2767i Manual de usuario rca/rs2767i-6GD.pdf 15 Apr 2023 2 0.45 Mb
2 Casio 3257 Operation manual casio/3257-1T9.pdf 01 Oct 2023 5 0.73 Mb
3 Eltax DV-100 Instruction manual eltax/dv-100-Q44.pdf 18 Dec 2023 35 2.29 Mb
4 Boss Audio Systems BV9993 Operation & user’s manual boss-audio-systems/bv9993-9H8.pdf 28 Nov 2023 14 11.69 Mb
5 Life Fitness Signature Signature Arm Curl Owner's manual life-fitness/signature-signature-arm-curl-94P.pdf 21 May 2023 8
6 Smeg ECF01 Instruction manual smeg/ecf01-D6H.pdf 22 Feb 2023 27

Similar Resources:

  • Clifford

    600

    (13 pages)
    Complete Owner’s ManualThe Science of Security™USA HeadquartersCanada HeadquartersUK HeadquartersGermany HeadquartersMexico Headquarters20750 Lassen Street Chatsworth, California 913111-800-CLIFFORD or 1-800-824-3208 or 1-818-709-75514513 Dobrin Street Montreal, Quebec H4R 2L81-800-361-3444 or 1-514-332-4444Boundary Business Court92/94 Church Road Mitcha …
  • Silicon Electronic

    Key Series

    (3 pages)
    ULTIMATE-BM REV 3 1 Ultimate (BM) Key - Series The SILICON’s ULTIMATE/TX31 - a new “Key Series” Car Alarm system provides TOYOTA car owners with one of the best available vehicle security system . It comes with the foll …
  • Omega

    AL-100DP

    (8 pages)
    3/07 MO/AL-100DPBACK COVERPRINTER’S NOTE:production back coveris to be printed with colorfront cover; this is aplace marker cover.This device complies with FCC Rules part 15. Operation is subject to thefollowing two conditions, (1) This device may not cause harmfulinterference and, (2) This device must accept any interference that maybe received, inc …
  • Ford

    Automobile

    (232 pages)
    Introduction 4Instrument Cluster 10Warning and control lights 10Gauges 13Entertainment Systems 15AM/FM stereo cassette with CD 15AM/FM stereo cassette 17AM/FM stereo with CD 24Climate Controls 50Heater only 50Manual heating and air conditioning 51Lights 53Headlamps 53Turn signal control 54Bulb replacement 55Driver Controls 61Windshield wiper/washer control 6 …
  • Subaru

    STARLINK 2016

    (30 pages)
    OWNER’S MANUALSafety & SecurityLove. It’s what makes a Subaru, a Subaru.SUBARU STARLINK™2016MY16StarlinkS&S_OMportrait.indd 1 5/11/15 3:31 PMYOUR SUBARU CONNECTED …
  • CLIFFORD MATRIX

    70.5X

    (70 pages)
    Model 70.5XInstallation GuideNOTE: This product is intended for installation by a profes-sional installer only! Any attempt to install this product by any person other than a trained professional may result in severe damage to a vehicle’s electrical system and components.© 2006 Directed Electronics, Vista, CA N5501C 12-06CLIFFORDMATRIX …

Comments, Questions and Opinions: