Panasonic GTWIN Reference Manual

Text of Panasonic GTWIN User Guide:

• Panasonic GTWIN, GTWIN Reference Manual 6.1 Troubleshooting 217 6.1 Troubleshooting In addition to the normal screens, the GT screen displays other helpful information, for example:  Screen messages (see p. 218)  GT errors (see p. 219)  PLC errors (see p. 222) This section is intended to help you understand such information and provide useful tips on what to do if something unusual occurs (see p. 226).

• Panasonic GTWIN, GTWIN Reference Manual 2.2 Menu Bar 23 2.2 Menu Bar You can access all GTWIN operations and functions via menus or the icons from the toolbars. Menu item Description File (see p. 77) Contains menu commands for working with and printing screen files. Edit (see p. 86) Contains menu commands for cutting, pasting, and copying graphics and text, and positioning objects. View (see p. 91) Contains menu commands to change base screen grid settings and size ratios, turn toolbar and status bar displays on and off, and carry out other operations related to screen displays. Draw (see p. 92) Contains menu commands to

• GTWIN Reference Manual 3.2 Port 45 Recommended network environment Use a local IP address on a dedicated-line network (private network) or a VPN (virtual private network). 1. When using a dedicated-line network: Install the FP7 under the environment in which a dedicated-line network is built. We recommended using the GT through a firewall. 2. W

• Panasonic GTWIN, GTWIN Reference Manual 5.1 Switch Parts 163 Tab Field Description Title Name You can assign the configuration settings a name. Basic Setup Operation Mode Bit Set: sets, i.e. turns on, the specified PLC bit device. Bit Reset: resets, i.e. turns off, the specified PLC bit device. Momentary: turns on the specified PLC bit device as long as the switch part is pressed. Alternate: reverses the status of the specified PLC bit device (ON or OFF) each time the switch part is pressed. ON/OFF Indication Off: the switch's appearance does not change on the GT screen even if you press it or the status of the output destination device changes. On: the

• Panasonic GTWIN, GTWIN Reference Manual 3.7 FP Monitor 69 Device type Description EV Timer/counter elapsed value FL File register WGR Data register (GT internal) GDT Internal flag (GT internal) WX External input WY External output WR Internal flag WL Link flag T Timer C Counter X Input Y Output R Internal special flag L Link flag For word devices, these display formats are available. Abbreviation Format US1 (default) Decimal (1 word, unsigned) S1 Decimal (1 word, signed) US2 Decimal (2 words, unsigned) S2 Decimal (2 words, signed)

• Panasonic GTWIN, GTWIN Reference Manual 5.7 Alarm List Parts 191 5.7.1 History of Alarms in Time Order In this operation mode, the alarm part shows a chronological list of alarms. Setup of an alarm list part for displaying alarms in chronological order Configuration parameters What appears on the tabs differs depending on which operation mode you have selected on the "Basic Setup" tab. Tab Field Description Title Name You can assign the configuration settings a name. Basic Setup Operation Mode Active List (see p

• Panasonic GTWIN, Parts and Their Functions GTWIN Reference Manual 206 Field Description Unit (only visible when you activate "SD Card (Logging Data)" Note: see explanation following table.  1 Year (Month unit): Displays the data for 12 months by month in 12 plots. The graph starts with January.  1 Month (Day unit): Displays the data for 31 days by day in 31 plots.  1 Day (Hour unit): Displays the data for 24 hours by hour in 24 plots.  Number of Plots: Specify the desired numb

• GTWIN Reference Manual 3.6 SD Memory Card Functions 57 When the firmware on the SD memory card and on the GT are the same, the screen data is copied immediately. If the firmware on the SD memory card differs from the firmware on the GT, the following screen appears. 5. Press [OK] to update the firmware Press [ESC] if you do not want to update the firmware. In this c

• Panasonic GTWIN, Menus GTWIN Reference Manual 136 Data in the RAM will be overwritten if its capacity is exceeded. Data stored on the SD memory card is automatically cleared from the RAM. 4.5.4.1 Log File and CSV File Structure Log file structure The file name, date and time of the logging data is recorded in CSV format on the SD memory card if logging conditions are met. If logging conditions are not met, a work file is created with the name File1(-------CURRENT-------).csv, for example, and converted once conditions are met. Q Year, month, day (Sept. 2, 20

• Panasonic GTWIN, GTWIN Reference Manual 6.6 What to do if Something Unusual Occurs 227 Problem Possible cause Possible solution panel. The contrast is set too low. Bring up the system menu (see p. 42) and adjust the contrast. The backlight is off due to the [Backlight Auto-off] setting in the [Setup] of the GT configuration settings in GTWIN. Touching any area of the screen lights that area. If a switch part is set on the touched area, the area will not light even if touched. To change the setting, change the content of the backlight auto-off settings. The backlight brightness is too dark. Bring up the system menu (see p. 42) and adjust the brightness. Ba

• Panasonic GTWIN, GTWIN Reference Manual 5.4 Data Parts 181 5.4 Data Parts Data parts are used to display the contents of PLC devices (i.e. addresses) directly on the screen. They can also be used in conjunction with keyboard parts (see p. 210) or keyboard screens (see p. 38) to change or input values for PLC devices from the GT side. A data part Comparison of data parts for older GT models and GT703/GT704/GT707 GT02 – GT32 GT703/GT704/GT707 One single data part for input and display is available in the standard parts library. By default, the data part is set

• Panasonic GTWIN, GTWIN Reference Manual 4.5 System Setting Menu 121 4.5.1.12 SD Memory Card Options for using SD memory cards Off Description Free Space on the SD card Activate to define at how much space to write to the device specified. Write to SD Card  Screen display when writing: when activated, "Saving Logging File" will appear on the GT screen when data is being written to the SD card.  Output during write: specify a device that will turn ON during writing.  Stop Writing Control: the save operation will be aborted if the device specified turns ON, such as when a power outage signal is detected.  Output when error occurs: if

• Panasonic GTWIN, Table of contents GTWIN Reference Manual 8 5.10 Custom Parts ........................................................................................ 215 6. Troubleshooting ................................................................ 216 6.1 Troubleshooting .................................................................................... 217 6.2 Screen Messages ................................................................................. 218 6.3 GT Series Error Codes ......................................................................... 219 6.4 PLC Error Codes ......................................................................

• Panasonic GTWIN, GTWIN Reference Manual 3.4 Test Menu for GT02 - GT32 47 3.4 Test Menu for GT02 - GT32 The test menu allows you perform self-diagnosis for selected, available functions. For example, you can check the status of the DIP switches without having to remove the panel.

• Panasonic GTWIN, Parts and Their Functions GTWIN Reference Manual 170 The selected design is displayed. 6. Click the items in the order specified by the numbers Q to R in the above figure to replace the design shown in the scroll-down list on the left with the design shown from the design library in the middle. If you prefer to use the "ON" design for the [OFF] state, simply click the [OFF] part in the scroll-down list and the "ON" image in the middle. 7. [OK] The new design is applied. The part attributes remain the same. Converting Switch Parts to Lamp/Message Parts and Vice Versa The following section explains the procedure for converting a s

• Panasonic GTWIN, GTWIN Reference Manual 5.2 Lamp Parts 173 5.2 Lamp Parts Lamp parts change color when the bit device (i.e. address) of the PLC being referenced is turned on or off. Example lamp parts from various GT models For GT703/GT704/GT707, parts are available from the standard parts library, a color library, and other libraries. All lamp parts can be converted into a custom lamp partized (see p. 171) or into a switch part (see p. 171). Double-click the part that has been placed on the base screen to set its attributes. GT02 - GT32 Lamp Parts Lamp part configuration for a GT32 Configurat

• Parts and Their Functions GTWIN Reference Manual 214 To display and hide keyboard parts during screen creation, you need to set the option "Keyboard Parts" on the register tab "Screen" in the GTWIN configuration (see p. 89). Use the icon in the toolbar "Display (see p. 24)" to display/hide the keyboard part or select

• Panasonic GTWIN, Menus GTWIN Reference Manual 106 3. Select [Apply] from the context menu or [Update], if your screen has been modified in between A table appears displaying a list of all screens and all parts with their text labels. The first column lists the screens in ascending order, the second the parts. The following columns contain language0 to language15. In this example, we will input simplified Chinese as language1 4. Click the column heading "Language1" A pop-up menu appears listing the characte

• Panasonic GTWIN, GT Panel System Menu GTWIN Reference Manual 54 1. When you are using FPWIN Pro version 6.x, select the file type "Packed Project Export files (Unicode)(*.pce)". 2. Both files must have the same file name. PLC connection method In order to be able copy PLC program files to or from the SD memory card, the PLC must be connected to the GT as follows: Connection of PLC to GT Copying possible? 1:1 communication Yes GT link function No PLC multiple connection No 3.6.3 Copy Screen Data to the SD Memory Card To copy screen data from the GT to the SD memory

• Panasonic GTWIN, Parts and Their Functions GTWIN Reference Manual 192 Tab Field Description Stop Updating By default, the alarm history is updated continuously. You can set a PLC register to stop the updating when you select "On". Color and Form Display Area Number of Lines: specifies the number of lines on the base screen to display alarms. The line width automatically adapts to fit the longest list entry. Display Frame Specifies whether the alarm part will be displayed with a frame and what lines will appear as well as the frame color. Color Specifies the

More Instructions:

	Panasonic GTWIN Reference manual 30-06-2023 297	DOWNLOAD
	Panasonic GTWIN Manual  29-12-2022 136	DOWNLOAD

Related Products and Documents (Touch terminals):

Comparable Devices:

Similar Resources:

• VeriFone Vx-520 Series APACS 40 (2 pages) www.cpay.comCREDIT SALE - OFFLINE • Scroll down and select OFFLINE• Enter password and press ENTER• Swipe credit card or manually enter the card number• Enter sale amount and press ENTER• Select CREDIT• For Amex cards, the terminal will prompt for corporate purchase card; If YES: enter order number, customer number and ship-to ZIP at the prompts� …

• impro IMPROX TRT (20 pages) MODEL NUMBER: IMPROX TRT ImproX (TRT) Twin Remote Terminal INSTALLATION MANUAL SPECIFICATIONS Working Environment Open Frame Construction (XRT910) and Aluminium Cabinet (XRT911) Input Voltage Power Requirements Current (mA) Power (W) Power Supply Combo (IPS920) NOTE: The Power Supply Combo inc …

• Siemens SIMATIC NET (300 pages) Preface, ContentsAdvanced PC Configuration -Introduction1Getting StartedConfigured Mode2PG Operation3Additional Functions4Configuring the OPC Server5Using the CP 1616 as aPROFINET IO Controller/Device6ExamplesIndustrial Ethernet7PROFIBUS-DP8Unspecified S7 Connection9SNMP10PROFINET11ToolsStation Configuration Editor12NCM PC13PC Station Wizard14Symbol File Con …

• Quartech 2800 (36 pages) Product Manual2800Compact Operator Interface Terminalfor use withAllen-Bradley ULTRA 3000 DrivesQuartech Corporation15923 Angelo DriveMacomb Township, Michigan 48042-4050Phone: (586) 781-0373 FAX: (586) 781-0378 www.quartechcorp.comPM2800U3K Revision 4The product described in this document can have a variety of uses, the user and those responsible for a …

• Redline RDL-3000 (142 pages) 70-00158-01-DRAFT Proprietary Redline Communications © 2010 Page 1 of 142 November 25, 2010 RDL-3000 Advanced Broadband Wireless Infrastructure Solutions User Manual …

• DSPPA MAG6402 (10 pages) Public Address SystemNetwork PA System On-Demand TerminalMAG6402Directions for UseThank you for choosing DSPPA PA System. To ensure better use of the equipment, please read this manualcarefully before usage.G u a n g z h o u D S P PA A u d i o C o . , L t d .http://www.dsppatech.com …

Comments, Questions and Opinions: