Manualios.com

Panasonic SC-TM910DVD Service Manual

Panasonic SC-TM910DVD Manual Online:

3.7, 2587 votes
Panasonic SC-TM910DVD User Manual
Panasonic SC-TM910DVD User Guide
Panasonic SC-TM910DVD Online Manual

Text of Panasonic SC-TM910DVD User Guide:

  • Overall Frequency Response (+3, -6 dB) at DECK OUT Normal 35 Hz to 14 kHz S/N Ratio 50 dB (A weighted) Wow and Flutter 0.18% (WRMS) Fast Forward and Rewind Time Approx. 120 seconds with C-60 cassette tape n DISC SECTION Disc played [8 cm or 12 cm] (1) DVD (DVD-Video, DivX #1,#2 ) (2) DVD-RAM (DVD-VR, JPEG # 2,#3 , MP3 # 2,#4 , MPEG4 # 2,#5 , DivX # 1,#2 ) (3)

  • 10.2.2. DVD Self-Diagnostic Function Error Code Error Code Diagnosis Contents Description of error Automatic FL Display Remarks F010 DVD Media disk A specification value is size from the PARENTAL LOCK value of the appointed country. Press [ ] on main unit for next error. F020 DVD Media disk There is no TT_SRPT. (RLBN is 0). Press [ ] on main unit for next error. F021 DVD

  • Panasonic SC-TM910DVD, Step 2 Flip over the P.C.B.. Step 3 Desolder IC5100. Step 1 Remove 1 screw. Step 2 Disconnect connector CN6701 at Mic P.C.B.. Step 3 Lift up the Mic P.C.B to remove it. Step 4 Remove 6 screws. Replament of Power Amp IC (IC5200/ IC5300/ IC5400) Repeat (Step 1) - (Step 3) of Item 11.11 for IC5200/ IC5300/IC5400. Step 5 Release 2 catches. Step 6 Remove Panel P.C.B.. 11.13.1. Disassembly of Tact Switch P.C.B. Step 7 Remove the Volume knob & Mic Volume Knob. 11.13. Disassembly of Panel P.C.B., Mic P.C.B

  • Panasonic SC-TM910DVD, • Disassembly of Mecha Chassis Step 1 Remove 11 screws (For GS/GCS/GCT). Remove 9 screws (For GC). * The differentiate the screws for the GC with GS/GCS/GCT, just because of the Voltage Selector. Step 2 Remove 2 screws at Speaker P.C.B.. Step 3 Detach the fan wires CNP2913 & CNP2914 from Main P.C.B.. Step 4 Remove rear panel. Step 5 Remove 2 screws. Step 6 Remove the Mecha Chassis. Note: For disassembly & assembly of traverse unit, please refer to section 11.16 of this service manual. Please refer to original Service Manual for the Disassembly and Assembly of the CD/DVD Changer Unit (CRS1D), section 5. 11.6. Disassembly of Rear Panel • Follow the (Step 1) - (Step 2) of Ite

  • Panasonic SC-TM910DVD, Important notes: Ensure all the trays are in the “STOCK” position before proceeding to the disassemble of traverse unit. For procedures to set the trays in “STOCK” position, please refer to original Service Manual for CRS1D, Section 4.3. Setting the trays in “STOCK” position, Order No. MD0603065A3. Step 2 Desolder wire at deck motor terminals (W1002). Step 3 Remove Deck P.C.B. • Assembly of Traverse Unit 11.16. Disassembly of Traverse Unit • Follow the (Step 1) - (Step 2) of Item 11.4 - Disassembly of Top Cabinet • Follow the (Step 1) - (Step 4) of Item 11.5 - Disassembly of CD/DVD Changer Unit 51 SA-VK950GC / SA-VK950GS / SA-VK950GCS / SA-VK950GC T 50 manual

  • Panasonic SC-TM910DVD, Error Code Diagnosis Contents Description of error Automatic FL Display Remarks F880 Task number is not appropriate Message coming from a non-existing task Press [ ] on main unit for next error. F890 Sending message when message is being sent to AV task Sending message to AV task Press [ ] on main unit for next error. F891 Message couldn’t be sent to AV task Begin sending message to AV task Press [ ] on main unit for next error. F893 FLASH ROM IC problem FLASH ROM IC installed is not operating properly (Neccessary replacement of FLASH ROM IC) or firmware problem Press [ ] on main unit for next error. F894 EEPROM abnormality EEPROM IC insta

  • Panasonic SC-TM910DVD, 11.1. Caution Below is the list of disassembly sections 11 Assembling and Disassembling Special Note: This model uses a new CD/DVD changer unit CRS1D. In this following section does not contain the necessary disassembly & assembly information for the CD/DVD changer unit (CRS1D) except the disasembly & assembly of traverse unit. Kindly refer to the original service manual for the CD/DVD changer unit. (Order No. MD0603065A3). “ATTENTION SERVICER” Some chassis components may have sharp edges. Be careful when disassembling and servicing. 1. This section describes procedures for checking the operation of the major printed circuit boards and replacing the main components. 2.

  • Panasonic SC-TM910DVD, Step 2 Flip over the PCB. Step 3 Desolder IC5701. Step 1 Detach cable CN5604. Replament of Power Amp IC (IC5100) Step 1 Remove IC clip. • IC5100 • Relacement of Regulator Diodes Step 1 Desolder D5904 & D5905. Step 2 Disconnect connector CN5502. Step 3 Remove the 3 screws on Digital Amp P.C.B.. Step 4 Remove Digital Amp P.C.B.. Note: Make sure P.C.B. slot insert to bottom chassis guide. 11.11. Disassembly of Digital Amp P.C.B. • Follow the (Step 1) - (Step 2) of Item 11.4 - Disassembly of Top Cabinet • Follow the (Step 1) - (Step 4) of Item 11.5 - Disassembly of CD/DVD Changer Unit • Follow the (Step 1) - (Step 4) of Item 11.6 - Disassembly of Rear Pan

  • Panasonic SC-TM910DVD, Item FL Display Key Operation Mode Name Description Remote Control Key Micro- processor firmware version display & EEPROM checksum display. Micro-processor firmware version display & EEPROM checksum display. In STOP (no disc) mode, press STOP button on the player, and “7” button on the remote control unit. Cancelled automatically 5 seconds later. Press “FL Display” button on remote control unit for next page. (FL Display) Refer to Section 10.3.1 for more information. DVD module firmware version displ

  • (El peso y las dimensiones son de un solo bafle) Stereo System SC-TM910DVD Colour (S)... Silver Type MODEL UNIT SC-TM910DVD SA-TM910DVD Stereo SB-TM910 Front Speaker SB-TM910 SB-TM910 SB-PC950 SB-PS950 SB-PS950 SA-TM910DVD SB-PC950 Center Speaker SB-PS950 Surround Specifications POTENCIA DE SALIDA (AMPLIFICADOR) Surround 110 W RCM por canal (3�

  • Panasonic SC-TM910DVD, 3. Turn on the power once again after one minute. Note : When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again. 7 SA-VK950GC / SA-VK950GS / SA-VK950GCS / SA-VK950GC T 6 manual de servicio SC-TM910DVD

  • Panasonic SC-TM910DVD, 10.3.3. Error Code Table Self-Diagnosis Function (refer Section 10.3) provides information on any problems occuring for the unit and its respective components by displaying the error codes. These error code such as U**, H** and F** are stored in memory and held unless it is cleared. The error code is automatically display after entering into self-diagnostic mode. Error Code Diagnosis Contents Description of error Automatic FL Display Remarks H01 Mode SW, plunger and capstan motor abnormal The tray is not able to open. For deck mechanism unit (For deck 1/2). Press [ ] on main unit for

  • For system with EEPROM as memory backup,memory space in EEPROM is neccesary. 2. To display all error code memorized In CRS1D Self-Diagnostic mode, press [SINGLE CHANGE] to display subsequence error code. It shall repeat after reaching error no. 5. e.g.: [1____IHMS]→ [SINGLE CHANGE] [2____ITOP]→ [SINGLE CHANGE] [3____HOME]→ [SINGLE CHANGE] [4____LOAD]→ [SINGLE CHANGE] [5_____UDD

  • Panasonic SC-TM910DVD, 10.3. Special Mode Table 2 Item FL Display Key Operation Mode Name Description Front Key Self -Diagnostic Mode To enter into self diagnostic checking for main unit. 1. Select [ ] for DVD/CD mode. (Ensure no disc is inserted into the drive unit.) 2. Press and hold [ ] button for 3 seconds follow by [ ]. To exit, press button on main unit or remote control. CD Changer Reliability Test (CRS1D) To determine the reliability of CD/DVD Changer Unit. In Self-Diagnostic Mode: 1. Select [ ] for CD mode. 2. Press [1] on remote control.. To exit, press button on main unit or remote control. (The tray will return to PLAY position and then power off) 33 SA-VK950GC / SA-VK950

  • Panasonic SC-TM910DVD, 11.2. Disassembly flow chart The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the servicing. To assemble the unit, reverse the steps shown in the chart as below. 42 S A-VK950GC / SA-VK950GS / SA-VK950GCS / SA-VK950GCT 41 manual de servicio SC-TM910DVD

  • Panasonic SC-TM910DVD, Error Code Diagnosis Contents Description of error Automatic FL Display Remarks LOAD Tray drive assembly abnormal Tray unit does not move from “STOCK” to “PLAY” position For CD/DVD changer unit (CRS1D). Press [SINGLE CHANGE] on main unit for next error. PDRV Cam gear/gear assembly abnormal Cam gear does not move from “HOME” to “PLAY” drive position. For CD/DVD changer unit (CRS1D). Press [SINGLE CHANGE] on main unit for next error. UDU UD base asssembly abnormal UD Base assembly does not move upwards from tray 5 to tray 2 For CD/DVD changer unit (CRS1D). Press [

  • Panasonic SC-TM910DVD, HighMAT is now available for CD Burning and in Leading DVD PlayersHighMAT is a new technology that is now available in leading software and consumer electronic devices to dramatically improve the digital media experience when you create homemade CDsHighMAT delivers a simple, standardized way for PC software and consumer electronics devices to talk to each other and work better together. When you create your homemade CDs with software that supports HighMAT CD burning, and then play them back on a DVD player that supports HighMAT, you get better, easier navigation. You get folders you can access with a single click of your DVD player´s remote control. You can view important information

  • Panasonic SC-TM910DVD, Notes: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. 3 SA-VK950GC / SA-VK950GS / SA-VK950GCS / SA-VK950GC T 3 manual de servicio SC-TM910DVD

Related Products and Documents (Stereo System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 IBM THINKPAD X121E Hardware maintenance manual ibm/thinkpad-x121e-R63.pdf 02 Apr 2023 112
2 Casio YA-W72M Operation & user’s manual casio/ya-w72m-645.pdf 17 Oct 2022 2 0.47 Mb
3 Grundig MT 5210 Manual  grundig/mt-5210-9GB.pdf 23 Jul 2023 12
4 Intermec AC18 Instructions manual intermec/ac18-79P.pdf 13 Mar 2023 28
5 Panasonic SC-PT465 Operating instructions manual panasonic/sc-pt465-55M.pdf 27 Nov 2022 44 8.11 Mb
6 Monacor DRM-884DTM Instruction manual monacor/drm-884dtm-GJX.pdf 30 Aug 2022 48

Similar Resources:

  • Geneva

    XS

    (34 pages)
    Manual – English .................................................... 01Bedienungsanleitung – Deutsch ........................... 07Mode d’emploi – Français ..................................... 13Manual del usuario – Español ............................... 19Manuale dell’utente – Italiano ............... …
  • Pioneer

    MJ-L5

    (86 pages)
    ORDER NO.PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, JapanPIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, BelgiumPIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Wheelock Place, Singapore 238880 …
  • Philips

    MCM393

    (28 pages)
    MCM393/all version© Copyright 2007 Philips Consumer Electronics B.V. Eindhoven, The NetherlandsAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips.Published by SL 0703 Service …
  • Chiayo

    Focus 505 series

    (14 pages)
    GREEN PRODUCTIt has been RoHS CompliantOPERATION MANUALPortable Sound SystemIC 3563A-FOCUS505IC 3563A-SQ5016IC 3563A-SM5016CHIAYO ELECTRONICS CO., LTD.http://www.chiayo.com.tw E-mail: [email protected]: 30, LANE 27, SEC.4. JEN-AL ROAD, TAIPEI, TAIWAN / TEL: 886-2-2741-5741 FAX: 886-2-2752-5242FACTORY: 88, CHUNG HSIAO STREET 2, CHIAYI, TAIWA …
  • Marantz

    CC4000OSE

    (1 pages)
    Marantz America, Inc. 440 Medinah Road Roselle, IL 60172Phone 630-307-3100 • Fax 630-307-2687 • www.marantz.comAll specifications are subject to change without notice. © 1999 Marantz America, Inc. The Marantz CC-4000 OSE sets a new standard in CD changer performance and flexibility,offering true audiophile-quality CD playback along with a host …
  • Panasonic

    SC-PM54

    (16 pages)
    Operating InstructionsCD Stereo SystemModel No. SC-PM53SC-PM54RQTV0102-3BBefore connecting, operating or adjusting this product, please read the instructions completely.Please keep this manual for future reference.Note:“EB” on the packaging indicates the United Kingdom.Operations in these instructions are described using remote control, but you can do th …

Comments, Questions and Opinions: