Manualios.com

Panasonic WJ-NX400K Operating Instructions Manual

Panasonic WJ-NX400K Manual Online:

3.3, 872 votes
Panasonic WJ-NX400K User Manual
Panasonic WJ-NX400K User Guide
Panasonic WJ-NX400K Online Manual

Text of Panasonic WJ-NX400K User Guide:

  • Panasonic WJ-NX400K, 28 29 Set up Light control mode [Light control mode] Select how to control the amount of light for each camera and transmit the information to the cameras to change the camera settings. Clicking the [Setup >] button for "Light control mode" on the [Camera setup] tab will display the setup page. [Light control mode] Outdoor scene: Depending on the brightness level (illuminance), the iris will automatically be controlled together with the shutter speed adjustment to control light. Indoor s

  • Panasonic WJ-NX400K, 18 19 Set up OSD [Display Title] Determine whether to display the title and select the title to display for each camera, the settings will be changed after the settings have been transmitted to the camera. Clicking the [Setup >] button for "Display Title" on the [Camera setup] tab will display the following items. ■ Setting items [Display] Select whether or not to display the title on camera images. If title display is activated, the title will be dis- played on camera images and will also be recorded with the recorded images. To transmit the settings to the camera, mark this item, and select either of the following. On: Title

  • Panasonic WJ-NX400K, 70 71 Check the hard disk drive information [HDD information] The capacities, operation time and statuses of the hard disk drives are displayed. Refer to the setup menu - the "Advanced setup" menu - the "Maintenance" page - the [HDD information] tab for further information about the items displayed on the [HDD information] tab. (☞ Page 62) Format the hard disk drives [Format HDD] Hard disk drives are formatted. It is necessary to initialize the HDD after replacing the HDD. Important: • When a hard disk drive is formatted, all the recorded images will be erased. Step 1 Click the [Execute >] button for "Format HDD&qu

  • Panasonic WJ-NX400K, 161160 Status display area Live/playback status display area The status of an image (live image/recorded image) will be displayed. The following information will be displayed: : Indicates that live images are being dis- played. : Indicates that playback images are being displayed. : Indicates that reverse playback images are being displayed. : Indicates that fast playback images are being displayed. : Indicates that fast reverse playback images are being displayed. : Indicates that a paused image is being dis- played. : Indicates that recorded images/audio are being downloaded. : Indicates that downloading of recorded i

  • Panasonic WJ-NX400K, 28 29 Set the automatic slow shutter of the camera [Auto slow shutter (Maximum shutter)] Select the auto slow shutter setting for each camera and transmit the information to the cameras to change the camera settings. Clicking the [Setup >] button for "Auto slow shutter (Maximum shutter)" on the [Camera setup] tab will display the setup page. [Auto slow shutter (Maximum shutter)] The auto slow shutter adjusts the sensor storage time to enhance the electronic sensitivity. The following are available setting values. Off(1/30s)/

  • Panasonic WJ-NX400K, 88 89 Description Display of the status display panel Error log Front LCD Display Output from connector HDD hour meter warning Hour meter warning: MAIN-y Hour meter warning: EXTx-y Hour meter warning: MAIN-y Hour meter warning: EXTx-y MAIN-y ERR HDD HOUR METER EXTx-y ERR HDD HOUR METER HDD error HDD skip* 1 – HDD skip: MAIN-y HDD skip: EXTx-y HDD skip: EXTx – – HDD write error – Write error: MAIN-y Write error: EXTx-y – – HDD read error – Read error: MAIN-y Read error: EXTx-y – – Alteration detection Altered: Cam.cc Altered: Cam.cc E

  • Panasonic WJ-NX400K, 108 109 Switch between control screen and wide view screen Camera images will be displayed on a full screen. Step 1 Click the [Wide view] button (☞ Page 94) on the operation window. → Images from the camera will be displayed on a full screen. The 1-screen is displayed by default. Step 2 To return from the full screen to the control screen, click the [Ctrl screen] button. → The display reverts to the control screen. The image display area corresponds to the default screen set up by the login user. When a wide view screen is set as the default screen, "4Screen-(1)" will automatically be applied. Note:

  • 6 7 Black screen displayed when playing recorded images In the following cases, a black screen may be displayed during playing recorded images. However, this is not malfunction. • When changing cameras or screen patterns during playback or pausing • When skipping/reverse skipping during playback • When fast forwarding/reverse fast forwarding during playb

  • Panasonic WJ-NX400K, 114 115 [Position] Registers the current orientation of the camera as a preset position. Moves the camera to a previously registered preset position. When the page is switched to 2/2 with a button on the top right of the detailed control panel, the following camera operation can be performed. [AUX] button Sets the device connected to the AUX terminal of the camera to the open/closed state. [Wiper] button Operates the washer/wiper of the WV-SUD638. [Setup] button Displays the camera setup window for registering a home position (☞ Page 120), executing auto back focus (☞ Page 120), etc. [Back] button Closes the &q

  • Panasonic WJ-NX400K, 42 43 On: Uses the SD memory backup function. Off: Does not use the SD memory backup function. Default: Off SD backup rec. The SD memory backup is a function to save images on the SD memory card inserted in the camera when the recorder fails to communicate with the camera during the set recording time. The SD memory backup is only available if the cam- era supports the SD memory recording and the com- pression is set to H.264/H.265. The SD memory recording is done by the registered compression of the camera. Note: • If the camera is set to "N

  • Panasonic WJ-NX400K, 88 89 About the error logs and the network logs Error logs This section describes the display contents on the status display panel of the main monitor, the logs of error occurrence (error logs) and their details. The display contents of each error logs are common between the main monitor and the web browser. • "x" indicates the extension unit number. • "y" indicates the HDD (hard disk drive) number. • "f" indicates the cooling fan number. • "cc" indicates the camera number. Description Display

  • Panasonic WJ-NX400K, 60 61 Register, edit or delete host [Host registration] Register, edit or delete the host information of the PC which can access to the recorder via the Internet. ■ Register new host Register the host information that uses the recorder such as the host IP address and the operation level. Up to 32 hosts can be registered. [Host IP address] Ener the IP address. • Enter the IP address in half width digits from 0 to 255. • "*" can be used as a special character representing all numbers.

  • Panasonic WJ-NX400K, 32 33 [Advanced setup] tab Set the connection method of the camera. Clicking the [Setup >] button of "Connection method" under the [Advanced setup] tab displays the setup screen. ■ Connection method [Connection method] Set the connection method for each camera. RTP: Connects with the RTP. RTSP: Connects with the RTSP. Internet mode: Connects in the Internet mode. Note: • The connection method will become valid when the camera is the i-pro series and the compression type is H.264/H.265. [Setup via recorder's main monitor]

  • Panasonic WJ-NX400K, 146 147 List of operation items The following "Top items" mainly shows operation and "Middle items", "Bottom items" and "Details" mainly show each operation menu of the main monitor and the browser. ○, △ and × indicate operable, partially limited, inoperable respectively. Top items Middle items Bottom items Details Remarks Main body Browser Live image display Main monitor Ctrl screen Image display area ○ ○ Status display panel ○ ○ Operation panel * Tree view is available for the browser. ○ ○ [Wide view] button ○ ○ Wide view display Image display area ○ ○ Status display panel ○ × Operation

  • 36 37 Set up recording for individual cameras [Advanced recording setup] Set up items such as the image capture size, frame rate and image quality for individual cameras. Clicking the [Advanced >] button on the [Recording setup] tab will open the advanced setup page. [Model] The model number of the connected camera will be displayed. (Blank: Camera is not registered) [Compression] The comp

  • 96 97 Image display area The number of images that can be displayed on the multiscreen differs for the control screen and the wide view screen. Note: • It is possible to select whether to display or hide the wide view multi-screen selection button. Refer to the "Set up the main monitor" section (☞ Page 45) for further information. • "64 Scre

  • Panasonic WJ-NX400K, 128 129 【Sub monitor display and re-encoding transmission enabled】 Display Multiscreen display 1-screen 3-screen/4-screen FHD(1920×1080) HD(1280×720) (Not applicable) 50 ips or higher QXGA(2048×1536) (Not applicable) 25 ips or higher WQHD(2560×1440) ~ 9M(2992×2992) (Not applicable) 10 ips or higher 12M(4000×3000) 10 ips or higher 3 ips or higher (H.264/H.265) Display not available (MJPEG) • Different values selected for resolution and frame rate will cause the data size of the playback images on the m

  • Panasonic WJ-NX400K, 167166 Auto mode/AUX/Wiper Select and activate the auto mode function/AUX function/wiper function of the camera. Auto mode function Step 1 Select "Auto mode" for the operation mode. Click [▼] button and select an auto mode that you want to operate. Auto track: The camera will automatically track an object moving on the screen. Auto pan: The camera direction will automatically move (pan) between the start point and end point set in advance. Preset sequence: The camera will move (pan) to the preset positions registered in advance in order of the preset position number (numerical order). Patrol:

  • Panasonic WJ-NX400K, 86 87 Menu/Tab Setting item (including those of the "Advanced setup" menu) Available range Default Remarks System management System setup Error output duration 0 s, 2 s, 5 s, 10 s, 20 s, 30 s, 1 min, Ext. 2 s ◎ Error buzzer duration 0 s, 2 s, 5 s, 10 s, 20 s, 30 s, 1 min, Ext. 2 s ◎ Safe shutdown time 10 s, 20 s, 30 s, 1 min, 2 min, 3 min, 4 min, 5 min 10 s ◎ HDD hour meter warning Off, 10000 h, 20000 h, 30000 h, 40000 h, 50000 h 20000 h ◎ Auto data delete Off, 1 day, ..., 10 days, 14 days, 30 days, 45 days,

  • Panasonic WJ-NX400K, Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual. Operating Instructions Network Disk Recorder Model No. WJ-NX400K WJ-NX400K/G Network Disk Recorder WJ-NX400 1 2 3 4 5 6 7 8 9

  • 10 11 [Language] tab Select the display language for the main monitor and for the web browser on the PC. [Language] Japanese/ English/ Français/ Español/ Deutsch/ Italiano/ Русский/ Português/ ไทย/ 中文 Default: English [Start/End date and time] Set up the rule of the Start/End date and time of day- light saving time. It is displayed when "Auto" is sel

  • Panasonic WJ-NX400K, 38 39 [Main monitor action] While the main monitor is displaying the operation window, select whether or not to switch to 1-screen display in association with alarm occurrence. On: Switch the monitor display in association with alarm occurrence. On(ACK/RESET): Switches the monitor display linking with the alarm confirmation and reset- ting. Off: Does not switch the monitor display. Default: Off Note: • When "On(ACK/RESET)" is selected, the monitor will not be switched and keeps displaying the same camera images even when a different alarm occurred while the main monitor action is enabled. When the alarm reset signal is input to the ALARM/CONTROL connector, the monitor

Related Products and Documents (Tuner):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Craftsman 37122 Instruction manual craftsman/37122-75H.pdf 24 Feb 2024 20 2.94 Mb
2 Dynex DX-40L261A12 Guía de configuración rápida dynex/dx-40l261a12-W8Z.pdf 30 Aug 2022 2 2.8 Mb
3 Panini Grill VillaWare NDVLPAPFS1 Owner's manual panini-grill/villaware-ndvlpapfs1-836.pdf 20 Mar 2024 28
4 Miller Maxstar 150 STH Owner's manual miller/maxstar-150-sth-818.pdf 06 Sep 2022 106
5 Stamina Magnetic Resistance Recumbent Bike 15-4760 Owner's manual stamina/magnetic-resistance-recumbent-bike-15-4760-4J8.pdf 07 Feb 2024 22
6 Kogan KGNFHDLEDPRO24VB Operation & user’s manual kogan/kgnfhdledpro24vb-SY9.pdf 02 Sep 2023 36

Similar Resources:

  • Hama

    00054227

    (50 pages)
    Operating Instructions / Bedienungsanleitung / Mode d‘emploi / Instrucciones de uso /Руководство по эксплуатации/Istruzioni per l‘uso / Gebruiksaanwijzing / Οδηγίες χρήσης / Instrukcja obsługi /Használati útmutató / Návod k použití / Návod na použitie / Manual de instruções / Kullanma kılavuzu /Manual de …
  • Pioneer

    XC-F10

    (43 pages)
    ORDER NO.PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, JapanPIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, BelgiumPIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2000cXC-F …
  • Marantz

    ST4000

    (4 pages)
    ST4000ST4000 FM/MW Stereo tunerFor drift-free FM stereo and MW reception with features like RDS and Radio Text display,choose the ST4000 stereo tuner. It lets you tune by frequency, station name or programmetype, and provides a clock readout with incredible broadcast accuracy. The high-sensitivityfront-end and quartz-locked digital tuning - with a choice of …
  • Panasonic

    WJND400 - NETWORK DISK RECORDER

    (233 pages)
    Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.Network Disk RecorderOperating InstructionsModel No. WJ-ND400123456789www.voicesonic.comPhone: 877.289.2829 Panasonic I-Pro Network Cameras …
  • Pioneer

    S-DV830

    (43 pages)
    ORDER NO.PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, JapanPIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, BelgiumPIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2003FrontSurround …
  • Palstar

    BT1500A

    (10 pages)
    Palstar Incorporated 9676 N. Looney Rd., Piqua, OH 45356 USA Customer Service and Sales Telephone: 1-800-773-7931 Fax: 1-937-773-8003 Email: [email protected] Rev. 1.10 31 Aug 2010 © Copyright 2006-2010 Palstar, Inc. Printed in the U.S.A. BT1500A 1500 Watt Balanced Antenna Tuner Owner’s Manual …

Comments, Questions and Opinions: