Manualios.com

Vecow VSM-200 Operation & User’s Manual

Vecow VSM-200 Manual Online:

4, 1665 votes
Vecow VSM-200 User Manual
Vecow VSM-200 User Guide
Vecow VSM-200 Online Manual

Text of Vecow VSM-200 User Guide:

  • Vecow VSM-200, iv ©Vecow VSM-200 Video Capture Card Series User Manual This manual is intended to be used as a praccal and informave guide only and is subject to change without prior noce. It does not represent commitment from Vecow Co., Ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequenal damages arising out of the use of the product or documentaon, nor for any infringements upon the rights of third pares, which may result from such use. This equipment has been tested and found to c

  • Vecow VSM-200, 8 Hardware Installation ©Vecow VSM-200 Video Capture Card Series User Manual 2.2 Connector Pin Assignments 2.2.1 Signal Input Pin Assignments 2.2.2 J2 Connector Pin Assignments 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 Pin No. 1 3 5 7 9 11 13 15 Funcon V5 V6 V7 V8 A5 A6 A7 A8 Pin No. 2 4 6 8 10 12 14 16 Funcon GND GND GND GND GND GND GND GND The serial console interface connector is a 16 pin header to D-sub 15 Cable connector. A null modem cable is required to connect a workstation. 2.2.1 and 2.2.2 show the pin assignments for the serial console interface connector Posion Connector Type Signal V1 BNC Video Source1 V

  • 17 Software Application No Funcon Descripon Main Funcon ❶ START Show the Video streaming on Image display area ❷ PAUSE Pause current video streaming ❸ STOP Close present video streaming PROPERTIES ❹ Camera Setup Show the Video streaming on Image display area ❺ Color Control Video quality adjustment ❻ Display Mode Single (1x1) Show 1 video streaming on image display area

  • Vecow VSM-200, 23 SDK SDK Function 5.1 Windows Before starng to build VSM-200 driver please ensure that you have installed the following development environment: 1. Visual Studio 2005 or later 2. Microso WDK 6000. More informaon on the following link hp://www.microso.com/whdc/resources/downloads.mspx 3. Microsoft Windows Vista Software Development Kit. While installing the SDK give simple pathname (for e.g. SDK3.0) more informaon on the following link hp://www.microso.com/downloads/en/ details.aspx?familyid=4377F86D-C913-4B5C-B87E F72E5B4E065&displaylang=en After the installation on the

  • Vecow VSM-200, 16 Software Application ©Vecow VSM-200 Video Capture Card Series User Manual 4.3 Using the VSM-200 Applicaon 4.3.1 Main Applicaon Window When entering the VSM-200 Program, the main interface screen will open as shown below. Funcon Descripon Image Display Area Video input image will show in here Status area The text will be highlighted under "Low-Light Detected", "Day Light Detected", or "No Moon Detected" status Status of image fps fps of the image input channel Image Display Area Status of Image fps Status Area ❷ ❸ ❶ ❹ ❺ ❻ ❼ ❽ ❾ ❿ ⓫ ⓬ ⓭

  • Vecow VSM-200, 4 General Introduction ©Vecow VSM-200 Video Capture Card Series User Manual 1.3 System Requirements Your PC must have the following hardware and soware installed to be able to use the VSM-200 series: • Hardware Requiremets Item VSM-200-4 VSM-200-8 CPU Intel Core 2 Duo E4500 2.2GHz Intel Core 2 Quad Q8400 2.66GHz Memory DDR2, 1GB DDR2, 1GB Graphics Unit DirectX 9.0c Compable Display Card Storage Size 500 GB 750 GB Slot/Socket One Available mini PCI-e 1.1 • Soware Requirement: Microso�

  • Vecow VSM-200, v Packing List Order Informaon Part Number Descripon VSM-200-4 4-CH, D1, Real-me, SUMIT(PCIe), 120 fps, Video Capture Card, include cables and SDK VSM-200-8 8-CH, D1, Real-me, SUMIT(PCIe), 240 fps, Video Capture Card, include cables and SDK No. Photo Descripon Qty 1 VSM-200-4/-8 Capture Card 1 2 VSM-200-4: 16 pin header to D-sub 15 Cable x 1 or VSM-200-8: 16 pin header to D-sub 15 Cable x 2 3 D-Sub 15 to BNC Cable 1 4 Driver and Soware CD 1 Suggeson Plaorm Part Number Descripon EC-5500-5GDE Fanless Embedded Controller with 5x GbE, 2x DDR3 SODIMM

  • Vecow VSM-200, 19 Software Application 4.3.4 Audio Downstream Selecon Every audio channel accept 2 audio line input , and every audio line is apply for one video line. Please see this table. Audio Line Audio Downstream Channel Speaker 1 A Le 2 A Right 3 B Le 4 B Right 5 C Le 6 C Right 7 D Le 8 D Right When you change the seng , must press ‘Apply’ to save it 4.3.5 Demonstraon 1. Press “CAMERA Setup” to select CAMERA source that you connect. 2. Select Video Standard: If you do not know your video system standar, please connect your video device vendor. 3. Select Video format &

  • Vecow VSM-200, 15 Software Application 4.2 Start the VSM-200 applicaon Insert the VSM-200 installaon and driver disk into your opcal drive. Go to My Computer and double-click the opcal drive, the folder displayed which looks like that shown in the screen shot below. There are 32bit and 64bit version of the VSM-200 applicaon, before you start the execution file, please make sure you choose the file compatible with your system. Start the VSM- 200 applicaon by double-click the VSM-200 icon. VSM-200 Helios Applicaon

  • Vecow VSM-200, 22 Software Application ©Vecow VSM-200 Video Capture Card Series User Manual Moon The motion detection threshold is an 8-bit programmable value used to determine the presence of motion. This value represents a minimum delta between scaled block average luma values to indicate motion within a block. The motion number of blocks detected threshold is an 8-bit programmable register field that controls how many blocks must detect motion before the frame comparison indicates motion detected to the host and external interrupts. No Moon The still image threshold is an 8-bit programmable value used to determine a non-changin

  • Vecow VSM-200, 20 Software Application ©Vecow VSM-200 Video Capture Card Series User Manual 4.4 Moon Detecon 4.4.1 Soware Interface On the Main screen of VSM-200 soware, press “Setup” and you will see 3 sub items: Enable Checked this opon to enable “Moon Detecon” funcon. Grid Selecon Click this item to select moon detecon area. Once the cell selection is done, you need to specify the threshold values as next step. ThresholdSengs An 8-bit programmable value used to determine of

  • Vecow VSM-200, Worldwide Technical Support and Product Informaon www.vecow.com Vecow Corporate Headquarters 7F No 105 Zhongcheng Rd Tucheng Dist New Taipei City 23674 Taiwan R.O.C. Tel: 886 2 2268 5658 Fax: 886 2 2268 1658 For further support informaon, refer to the Technical Support and Professional Services appendix. To comment on Vecow Co., Ltd. documentaon, refer to the Vecow Co., Ltd. web site at www.vecow.com. © 2011–2012 Vecow Co., Ltd. All rights reserved.

  • 3 General Introduction 1.2.2 Specicaon of Vecow VSM-200-8 General Bus Type /Form Factor SUMIT (PCI Express) Dimensions( L x H ) 90mm x 96mm (3.5" x 3.8") I/O Connector 2 x 16 pin header to D-Sub 15 cable 2 x D-Sub 15 to BNC cable Environment Cercaons FCC, CE, RoHS Compliance Storage Temperature -40°C to 85°C (-40 °F to 185 °F) Operate Temperature

  • Vecow VSM-200, 6 Hardware Installation ©Vecow VSM-200 Video Capture Card Series User Manual Hardware Installation 2 2.1 Install VSM-200 Power input, GbE ports, COM ports and oponal isolated DIO are located on the rear panel. In this secon, we’ll illustrate connectors on the rear panel. Before you install VSM-200, please power o the system for say. Step1. Insert VSM-200 card into Sumit slot Step2.

  • Vecow VSM-200, 1 General Introduction General Introduction Thank you for your purchase of the VSM-200 video capture card. The Vecow VSM-200 series, SUMIT™-based, extended temperature 4-CH/8-CH Video/Audio Capture Card, which provides outstanding transferring rate for industrial level systems that require small footprint and steady performance under harsh environments. Developed by the by the Small Form Factor special Interest Group (SFF-SIG™), VSM-200 series feature the Stackable Unied Module Interconnect Technology (SUMIT) interface. Main concern of solid, high-speed connector technologies is small form factors now days. In order to minimize the board spa

  • Vecow VSM-200, 7 Hardware Installation Please make sure PCB is firmly blocked on the board. Step3. Power On your system and install driver. Step4. Connect 16 pin to D-sub 15 Cable for source input. Detailed pin defination please refer to 2.1 secon. Step5.

  • Vecow VSM-200, 14 Software Application ©Vecow VSM-200 Video Capture Card Series User Manual Software Application 4.1 Microso .NET Frame work installaon The Microso .NET Frame work will install on windows install folder. For example, on WinXP SP3, you can check “Windows\Microso.NET\Framework” folder. Otherwise, you can get the .NET Frame work here: hp://www.microso.com/download/en/details.aspx?id=19 4 Noce before installing the soware: Make sure your system has installed .NET frame work 2.0 especially the WinXP

  • Vecow VSM-200, 33 SDK 5.2 Linux System 5.2.1 Driver Building Guide Before you start, please ensure you have root ID and password. CAUTION! CAUTION! Please nd as these two le that is on Linux SDK package v4l2_source_2.6.33.tar.bz2 cx25858_src_2.0.108.tar.gz • Install v4l2 module 1. Type “tar -jxvf v4l2_source_2.6.33.tar.bz2”You will see a folder “v4l-dvb-abd3aac6644e”. Please into this folder for next step. 2. Type “make” 3. Type “make install” 4. Type “make clean” 5. Type “make distclean” • Upgrade driver source le to v4l2 module 1. Copy “cx25858_src_2.0.108.tar.gz”

  • Vecow VSM-200, 24 SDK ©Vecow VSM-200 Video Capture Card Series User Manual Before compiling Applicaon soware you need to the DirectShow base class. First, add DirectShow base class path to Visual Studio 2005 project. Secondly, add include path as the shot below: Thirdly, add library path: Once the path for includes and libraries are set properly, you can start to compile the applicaon to get the executable soware. CAUTION! CAUTION! • Compiler the cx25858 driver source Open “Capture” module on source project. 1. Invoke your build environment as your target O.S 2. Change directory to SDK\Capture. 3. At the command prompt run the setpath.bat 4. Run the build ulity with following o

  • Vecow VSM-200, 25 SDK 5.1.2 Graphedit demo on Window System The Microsoft DirectX SDK provides a very useful debugging utility called GraphEdit, which can be used to create Media device model. The demo of download video streaming with GraphEdit step: From the Graph menu o f t h e G r a p h E d i t ap p li cat i o n , c l i ck Insert Filters… and choose the desired lters. Step1. Insert lter Add Crossbar Device Step2. Add Capture Device Step3. Goto the “DirectShow filter” class and get next lter. Step4.

Related Products and Documents (Video Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Weslo Pursuit 690 Operation & user’s manual weslo/pursuit-690-VUO.pdf 07 Oct 2023 16 0.31 Mb
2 Clifford 420.4X Owner's manual clifford/420-4x-N7P.pdf 11 Nov 2022 40 0.3 Mb
3 American Standard Copeland 7005.201 Installation instructions manual american-standard/copeland-7005-201-X62.pdf 16 Sep 2023 8 0.96 Mb
4 Aviom A-16CS Operation & user’s manual aviom/a-16cs-ZJ5.pdf 31 Jul 2023 92 2.3 Mb
5 Friedrich CP08C10 Service and parts manual friedrich/cp08c10-841.pdf 03 Oct 2022 24 1.84 Mb
6 Boost MARQUEE Owner's manual boost/marquee-G6K.pdf 28 Dec 2022 68 1.21 Mb

Similar Resources:

  • Diablotek

    VARX- 8P

    (1 pages)
    VIDEO CARD Model NO.: VARX- 8P UPC NO.: 843636000477 Description: ATI RAGE XL 8MB PCI VIDEO CARD SPEC: • Chip : ATI Rage XL • Interface : PCI • Memory : 8MB • Signal out-put : VGA Feature: • CHARISMA ENGINE™ • PIXEL TAPESTRY™ architecture • VIDEO IMMERSION™ Box Content: • ATI RAGE XL 8MB PCI VIDEO CARD • User’s Manual • …
  • Diablotek

    V9000-P256

    (1 pages)
    VIDEO CARD Model NO.: V9000-P256 UPC NO.: 843636002648 Description: ATI RADEON 9000 256MB PCI VIDEO CARD SPEC: • Chip : ATI Radeon 9000 • Interface : PCI • Memory : 256MB • Signal out-put : VGA, DVI, S-Video Feature: • SMARTSHADER technology • SMOOTHVISION technology • Integrated TV-Out Encoder Box Content: • ATI RADEON 9000 256MB PCI …
  • Gigabyte

    GV-N520D3-1GI

    (34 pages)
    GV-N520OC-1GI/ GV-N520TC-1GI/GV-N520D3-1GI NVIDIA® GeForceTM GT 520 Graphics AcceleratorUser's ManualRev. 10212MM-N520-102ERCopyright© 2011 GIGABYTE TECHNOLOGY CO., LTDCopyright by GIGA-BYTE TECHNOLOGY CO., LTD. (“GBT”). No part of this manual may be reproduced or trans-mitted in any form without the expressed, written permission of GBT.Trademark …
  • Barco

    TDRS-7101

    (2 pages)
    TDRS-71013D reconstruction systemThe Barco 3D reconstruction systemCone-beam computed tomography (CBCT) systems are capable of providing images of high diagnostic quality, with relatively short scanning times and low radiation exposures. CBCT systems are being adopted rapidly for imaging in the head- and neck area, intra-operative imaging (C-arm …
  • MSI

    R4350 series

    (2 pages)
    G52-V1612X1 September 2008Int erartnaS-tioorncialMTEL. 886-2-32345599FAX. 886-2-32345488http://www.msi.com.twUnder the European Union ("EU") Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of "electrical and electronic equipment" cannot be discarded as municipa …
  • Apple

    Power Mac G4

    (4 pages)
     Power Mac G4 (Mirrored Drive Doors) Memory (DRAM DIMM) Replacement Instructions Follow the instructions in this sheet carefully. Failure to follow these instructions could damage your equipment and void its warranty. Note: Written and video instructions covering customer-installable parts are available at http://www.info.apple.com/installparts/. Warn …

Comments, Questions and Opinions: