Wonwoo Rapport-10HD/PRO Operation & User’s Manual

Text of Wonwoo Rapport-10HD/PRO User Guide:

• Wonwoo Rapport-10HD/PRO, Safety information 1 Preduct introduction 1.1 Standard items 1.2 Part name & Functions 1.2.1 Front 1.2.2 Top side 1.2.3 Back & side 1.3 Operation 1.3.1 Operating button 1.4 Product specifiations 1.4.1 Electrical Specifications 1.4.2 Dimension 1.5 Battery charging 1.5.1 Battery charging by DC power 1.5.2 LED Indicator 4p 6p 7p 8p 8p 8p 9p 10p 10p 11p 11p 12p 13p 13p 13p 2 Basic functions 2.1 Power On/Off 2.2 Starting and End 2.2.1 Starting 2.2.2 Finish the product 3 Ra

• Wonwoo Rapport-10HD/PRO, Temperature: : 0℃ ~ 50℃ Relative Humidity: : 30% ~ 90% Power consumtion : 19.2W(DC12V ± 15%, 1.6A) SAFETY INFORMATION SAFETY INFORMATION Precautions The following describes how to safely operate the Rapport-10HD/PRO. Please read carefully “the precautions for use of this product” prior to using this device. Check the input and output ranges of any voltages being applied to all inputs and outputs of the device, and ensure their connections have been made properly so no abnormal load is placed on the operation of the device. If the measurement value is unknown when measuring a resistance, set the Rapport-10HD/PRO meter to its maximum value so that no abnormal load is p

• Wonwoo Rapport-10HD/PRO, PRODUCT INTRODUCTION 1. Summary Suitable for HD CCTV monitor in limited space and field monitor as well. 10.05", 16:9 widescreen aspect ratio without the quality loss than comes from scaling, altering an image to fit on a different screen size Superb connectivity with various surveillance equipments and peripherals with the HD-SDI, CVBS, VGA ports. And the HDMI port also gives uncompressed high quality video. White LED backlight ensures natural colors from camera, DVR or others. VESA standard 4 holes on the back allows placing in

• PRODUCT INTRODUCTION PRODUCT INTRODUCTION 1.2 Part name & Functions 1.2.2 Top side ① Power LED : It shown the power is on. ② Red LED : Red light is turned on when charging it. Green LED : Green LED is on when the battery is fully charghed. ③ PWR button : Power ON/OFF button. ④ SET button : Used to confirm selection in menu screens and set the picture ratio. ⑤ <, &

• Wonwoo Rapport-10HD/PRO, 1.4 Product specifications 1.4.1 Electrical Specifications PRODUCT INTRODUCTION PRODUCT INTRODUCTIO 1.3 Operation 1.3.1 Operating button Each function of buttons are as below. < Rapport-10HD > < Rapport-10HD PRO> Power ON/OFF Select OSD MENU and change the screen size Display OSD menu시 Start recording / Pause recording Monitor mode / change to playback or recording mode Move OSD MENU Select video type - HD-SDI - CVBS - HDMI - VGA SECTION 버 튼 DESCRIPTION Built-in battery Charging time Operating

• Wonwoo Rapport-10HD/PRO, FUNCTIONS 1.4.2 Dimension * 266(W) x 176(H) x 38(D) Unit : mm 266 176 38 266 1.5 Battery charging 1.5.1 Battery charging by DC power This product can be charged by using DC adaptor which is provided in the box and connect it to the DC jack of the product. If the product fully charged, the LED is changed to green color. After fully charged it, disconnect the DC jack from the adaptor. 1.5.2 LED Indicatior Check the battery color as below picture. - Use the manufacture provided adaptor only (12V/2.5A). If you use low voltage termial, it may cause ma

• Wonwoo Rapport-10HD/PRO, 2 Basic functions 2.1 Power On / Off Switch on the power button in the side of product and press “PWR” button for 3 seconds to turn on the power. ※ The discharge starts when the main switch is turned on and it start to consume power from the battery. Therefore, when the product is not being used for a period of time, make sure the main switch is turned off. 2.2 Starting and Finish the product 2.2.1 Starting 2.2.2 Finish the product To finish the proudct, press power button for 3 seconds. press 3 seconds. 3 Rapport-10HD/PRO functions 3.1 Functions This product have below functions Multi

• Wonwoo Rapport-10HD/PRO, 3.2 Screen details 3.2.1 Monitoring mode Select HD-SDI, HDMI, CVBS and VGA by using “<”, “>” buttons. The bottom left side is shown the current video mode. - Default : HD-SDI - video mode change : HD-SDI -> CVBS-> HDMI -> VGA -> HD-SDI The video mode change - Select picture ratio Full Screen, Aspect Ratio and 1:1 by using “SET” button. - The top right side is shown the current picture ratio with icon. Select picture ratio 3.2.2 Screen The video input, power connection and audio input etc, kinds of video connected informations are shown by the OSD (On Scre

• Wonwoo Rapport-10HD/PRO, 3.2.3.2 Display setting Adjust video display position in this menu. - H-Position : Adjust picture postion horizontally on the screen. (Adjustable from 45~55 ) - V-Position : Adjust picture postion vertically on the screen. (Adjustable from 47~53) 3.2.3 OSD MENU 3.2.3.1 Video setting Adjust brightness of the Video. Brightness : Adjust brightness of LCD screen. 0(Darkness)~15(Brightness) Menu - Menu : Press “MENU” button to go into the OSD menu in the monitering mode. - Move item : Press “<”, “>” buttons to move and select OSD menu. - Select item : Press “SET” button to select OSD menu.

• Wonwoo Rapport-10HD/PRO, 3.2.3.3 Audio setting Set the Audio singal (only HD-SDI, HDMI) in this menu. - Volume : Adjust volume. 0(Mute) ~ 9(MAX) steps selectable. - Channel : Select Audio channel. 3.2.3.4 System setting - Test Pattern : Display test pattern image on the LCD. Press “SET” button to go back to the menu. - FirmWare(F/W) Version : Check the firmware of the product. - System Time : Set and display current time. - F/W Update : Upgrade the product firmware.

• Wonwoo Rapport-10HD/PRO, 3.2.4 Firmware update Using USB cable, update the proudcts’ firmware. 3. Find the removable disk in the “My computer” of the PC. 1. Connect USB cable : Connect the USB cable in the back side of USB terminal and PC. 2. Select “Yes” on the screen. - Copy Firmware ( PC-> USB connect -> SD Card of the product ) [ Select “Yes” to connect USB ] [ Find “my computer”] 3.2.3.5 OSD setting Set the product system in this menu. Select OSD display in the monitoring mode. [ OSD menu setting ] FUNCTIONSFUNCTIONS 22 Multi-Format Input Monitor 23 Multi-Format Input Monitor

• Wonwoo Rapport-10HD/PRO, 1. Select as below. OSD Menu SYSTEM → F/W Update -> YES 2.The firmware is automatically upgraded. It will takes 1 minute. Even the progress looks stop for dozens of seconds, it still working order. (Do not discounnect power until the upgrade is finished.) 5. Select the “SET” button to disconnect PC. [ Disconnect the USB ] - Firmware update [ Rapport-10HD PRO Select F/W update ] [ F/W updating ] FUNCTIONS FUNCTIONS [ Rapport-10HD Select F/W update ] 4. Copy the supplied firmware to the removable disk of PC. File name for Rap

• Wonwoo Rapport-10HD/PRO, 3. When update is completed, below window is shown and the power will be off when press “OK” button. Turn on the power by pressing “POWER” button to restart. [ F/W update completed ] 4. Below screen is shown when there is no firmware files. - Check the SD card and USB connecting. - After checking it, restart the update. If the update is keep filed, please contact where you originally purchased the product. [ F/W failed ] FUNCTIONSFUNCTIONS 3.2.5 Record / Playback function (Support Rapport-10HD PRO only) 3.2.5.1 Recording [ Start button to recording

• Wonwoo Rapport-10HD/PRO, FUNCTIONS FUNCTIONS Pause icon [ Paused screen ] [ Recorded file list ] 3.2.5.2 Replay ① File name : Shown the file currently playing. ② Resolution / Frame rate : Shown the resolution and frame rate of currently playing. ③ Progress bar : Shown the playing progress bar ④ Playback icon : Shown the playing status by icon ( ▶:Playback , || : Pause ) ⑤ Volume : Shown the volume level. [ Play the recorded file ] ① ② ③ ④ ⑤ Press REC button to pause replay. Below is shown the paused screen. To check the recorded file list, change the screen to the replay mode and press the menu button on the b

• FUNCTIONSFUNCTIONS You can select and change the recorded file by using the direction button as below. - Press short time ‘>’ button of the product body : Fast forward to 20 sec. - Press short time ‘<’ button of the product body : Fast rewind to 20 sec - Press long time ‘>’ button of the product body : Play next file - Press short time ‘<’ button of t

• 3.2.6.1 TEST Pattern 3.2.6 TEST Mode & Battery low alarm. The test pattern function allow technicians to configure monitors and cameras video siganl in/out problems. And the battery low alarm makes user know when the product need to be charged. 1. Select as below to test pattern. OSD Menu SYSTEM → Test Pattern -> YES -> press SET FUNCTIONS FUNCTIONS [ Select

• Wonwoo Rapport-10HD/PRO, 3.2.5.2 Low Battery If below message is shown, please charging the battery. 1. Select as below to set factory reset. OSD Menu SYSTEM → Factory -> YES [ Low Battery warnning ] Restore setting values to the factory default. All existing setting value will be erased. 3.2.5.3 Video Loss & no video message. If there is no video input or video loss, below message is shown up [ Video Loss message] [ Check Factory reset ] FUNCTIONSFUNCTIONS [ Rapport-10HD PRO Select Factory Default ][ Rapport-10HD Select Factory Default ]

Related Products and Documents (Security System Monitor):

Comparable Devices:

Similar Resources:

• AAS LCD35SV (8 pages) Copyright © 2012 by AAS Technology T-82 www.AAS.com.tw R201212-V04 User Manual 3.5” TFT LCD CCTV Service Viewer with Wristband LCD35SV LCD35SV is a type of product that summarizes views of first-line safety engineers and it is developed specially for technical personnel to debug the front camera conveniently. It has some functions, lik …

• Lorex SG17LD800 (102 pages) Copyright © 2007 LOREX Technology Inc. www.lorexcctv.com LCD MONITOR / 8 CHANNEL DVR COMBO Instruction ManualEnglish Version 1.0SERIES:SG17LD800 & SG19LD800Series Includes: SG17LD800 & SG19LD800 Series (NTSC); SG17LD800P & SG19LD800P Series (PAL); SG17LD804-161 & SG19LD804-161; SG17LD804P-161 & SG19LD804P- …

• Brigade VBV-770FM (12 pages) VBV-770FM vehicle CCTV monitorQuick installation guideGuide d’installation rapideKurzanleitungGuida d’installazione rapidaGuía rápida de instalaciónSnelle installatie handleidingGuia rápida de instalaçãoРуководство по быстрой установкеStock code #3904A …

• Speco VM-901B (1 pages) VM-901B9” B/W MonitorSpecificationsResolution Over 800 TV linesInput BNC Connector, switchable 75ohm/high impedanceInput Signal 1.0 Vp-p composite, video, sync negative, loopingInput Voltage 100-240 volts AC 50/60 HZLinearity +/- 10% horizontal , +/- 10% verticalScanning Frequency EIA 15.75 kHz horizontal, 60 HzVideo Gain 33 dbOperating Tempurature 32˚F t …

• Speco VM-2001B (1 pages) VM-2001B20” High Resolution B/W MonitorSpecificationsGeneral Construction Steel cabinet with plastic front panelWeight N.W./G.W.: 19.5kg/22kgElectrical Input Voltage 96~256 Vac 50/60HzPower Consumption 48wInput Signal 0.5 to 2.0 Vp-p composite video,negative synchronizationInput Impedance 75 ohms or high (switchable)Bandwidth 100 Hz to 10 MHzVideo Gain 30 …

• Lorex SG17LD800 (8 pages) www.lorexcctv.comSG19LD800/SG17LD800/400 Series Quick Start Guide_R1 Page 1Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E …

Comments, Questions and Opinions: